Tribology Research: From Model Experiment to Industrial Problem: A Century of Efforts in Mechanics, Materials Science and Physico-Chemistry, Proceedings of the 27th Leeds-Lyon Symposium on Tribology

Content: 
Introduction
Pages v-viii

Dynamic behaviour of elastic shaft supported by hydrodynamic bearings Original Research Article
Pages 3-13
Jean Frene, Olivier Bonneau

First principles multiscale modeling of physico-chemical aspects of tribology Original Research Article
Pages 15-33
William A. Goddard III, Tahir Cagin, Yue Qi, Yanhua Zhou, Jianwei Che

Dynamic friction Original Research Article
Pages 37-45
K.L. Johnson

Elastic waves induced by the frictional sliding of two elastic half-spaces Original Research Article
Pages 47-54
G.G. Adams, M. Nosonovsky

In search of dynamic effects in dry sliding friction Original Research Article
Pages 55-59
A. Soom, A. Chopra

Contact mechanics and lubrication hydrodynamics of chemical-mechanical planarization Original Research Article
Pages 63-68
John Tichy

Direct measurement of adhesion between clean metal and tool surfaces in machining Original Research Article
Pages 69-77
P.N. Chhabra, W.D. Compton, S. Chandrasekar

Towards an ultrasonic mapping of the contact pressure within an engineering component Original Research Article
Pages 79-85
K. Hodgson, R.S. Dwyer-Joyce, B.W. Drinkwater

Model experiments to determine the stiffness of joints in graphite reactor cores Original Research Article
Pages 87-95
R.S. Dwyer-Joyce, A.M. Robinson, B.W. Drinkwater, J.F.B. Payne

Spring-supported thrust bearings used in hydroelectric generators: Finite element analysis of pad deflection Original Research Article
Pages 99-110
Ms.A.L. Brown, Dr.J.B. Medley, Mr.J.H. Ferguson

Experimental study of the influence of bubbly oil on cavitation erosion of engine journal bearing materials Original Research Article
Pages 111-119
A. Qi, M. Priest, C.M. Taylor, R.M. Mortier, D.D. Parker, W.H. Preston

A study on the characteristics of swing pad journal bearings Original Research Article
Pages 121-126
K. Iwamoto

Rotors on tilting pad journal bearings: the results of theoretical and experimental models Original Research Article
Pages 127-137
D. de Falco, S. della Valle, S. Pagano, E. Rocca

Thermomechanical finite element analysis to describe the engagement and wear of electromagnetic clutches Original Research Article
Pages 141-149
Gary F. Dargush, Andres Soom, Catalin I. Serpe

Wear test of alumina-on-alumina sliding pairs as model experiment for wear in ceramic-on-ceramic joint prostheses Original Research Article
Pages 151-160
Y. Sawae, T. Murakami, S. Tashima, T. Shimotoso

Wear of hydrodynamic journal bearings Original Research Article
Pages 161-166
L. Rozeanu, F.E. Kennedy

Laboratory wear studies of refractory side dams in the strip steel casting process Original Research Article
Pages 167-175
P. Fournier, F. Platon

The prediction of sliding wear: theory, experiment and finite-element analysis Original Research Article
Pages 177-183
Y. Blake

Friction and microslip of turbomachinery components Original Research Article
Pages 187-198
E.J. Berger, M.R. Begley

Optimisation of tribosystems in dental instruments Original Research Article
Pages 199-207
A. Pauschitz, F. Franek

Surface force in slider air bearings of hard disks Original Research Article
Pages 209-217
Bo Zhang, Akira Nakajima

Toroidal CVTs: Rationalizing the fluid performance requirements Original Research Article
Pages 219-230
Farrukh Qureshi, Craig D. Tipton, Michael E. Huston

Key tribochemical aspects of the boundary lubrication Original Research Article
Pages 233-252
C. Kajdas

Environmental tribology Original Research Article
Pages 253-271
Michael N. Gardos

Nanoscale surface rheology in tribology Original Research Article
Pages 273-282
D. Mazuyer, A. Tonck, S. Bec, J.-L. Loubet, J.-M. Georges

Study of non-steady state grease lubrication with fluorescence microscope Original Research Article
Pages 285-294
J. Sugimura, M. Akiyama

Lubrication regimes in rolling element bearings Original Research Article
Pages 295-301
B. Damiens, A.A. Lubrecht, P.M.E. Cann

Rolling bearing lubrication with grease at low temperatures Original Research Article
Pages 303-312
J. Gerstenberger, G. Poll

Rheological and tribological correlation study of a series of FP additized greases Original Research Article
Pages 313-320
Carl F. Kernizan, Herman F. George

Frictional torque of cylindrical roller thrust bearing in grease lubrication Original Research Article
Pages 321-328
Tetsuzo Hatazawa, Jujiro Kagami, Takahisa Kawaguchi

Lubrication of water-based clay suspensions Original Research Article
Pages 331-340
B.J. Briscoe, P.M. Cann, A. Delfino, G. Maitland

The effect of active and passive third body film in friction of carbons Part 1: Friction and wear performance at various scales Original Research Article
Pages 341-350
K. Lafdi, K.M. Teo

The effect of active and passive third body film in friction of carbons Part 2: Characterization of friction film Original Research Article
Pages 351-360
K. Lafdi, K.-M. Teo

A discrete solid third body model: Influence of the intergranular forces on the macroscopic behaviour Original Research Article
Pages 361-368
B. Sève, I. Iordanoff, Y. Berthier

Tribotesting of tibial bearings of knee prostheses Original Research Article
Pages 371-379
F.E. Kennedy, J.H. Currier, B. Wong

A tribometer for the study of materials under railway braking conditions Original Research Article
Pages 381-391
Yannick Desplanques, Gérard Degallaix, Reynald Copin, Yves Berthier

On the two-disc machine: A polyvalent and powerful tool to study fundamental and industrial problems related to elastohydrodynamic lubrication Original Research Article
Pages 393-402
Fabrice Ville, Daniel Nélias, Georges Tourlonias, Louis Flamand, Philippe Sainsot

Experimental evaluation of shape effects on friction in lubricated nonconformal contacts Original Research Article
Pages 403-414
R. Bassani, E. Ciulli

Effects of local high pressures and extreme shears at tribological contact spots Original Research Article
Pages 417-428
Doris Kuhlmann-Wilsdorf

Near surface transformations: An example of driven phase transformations Original Research Article
Pages 429-438
L. Chaffron, G. Martin

Phase transformation in machining steels Original Research Article
Pages 439-446
Wonsik Kim, Patrick Kwon

Experimental investigation of surface initiated rolling contact fatigue using dented surfaces Original Research Article
Pages 449-458
D. Girodin, F. Ville, R. Guers, G. Dudragne

Numerical and experimental investigations on rolling contact fatigue for dented surfaces Original Research Article
Pages 459-467
Sandrine Coulon, Fabrice Ville, Daniel Nelias

Contact fatigue behaviour of artificially indented austempered ductile iron (ADI) discs Original Research Article
Pages 469-482
L. Magalhães, J. Seabra, C. Sá

The influence of cam-follower motion on elastohydrodynamic film thickness Original Research Article
Pages 485-493
R.P. Glovnea, H.A. Spikes

Experimental study of central and minimum film thickness in elastohydrodynamic elliptic contacts Original Research Article
Pages 495-504
I. Křupka, M. Hartl, R. Polišĉuk, M. Liška

Ultrathin film hybrid technique applied to coated surfaces Original Research Article
Pages 505-513
Alexei Jolkin, Roland Larsson

Abrasiveness of particles measured by Cone-Fit Analysis (CFA) Original Research Article
Pages 517-527
D.V. De Pellegrin, G.W. Stachowiak

Ag thin film on Si as the lubricant under ultra-high vacuum and the effect of adsorbed gas molecules on friction Original Research Article
Pages 529-538
F. Honda, A. Katayama, R. Nakata

Electrochemical aspects of tribocorrosion Original Research Article
Pages 539-547
M. Stemp, S. Mischler, D. Landolt

Two-dimensional normal and tangential rail/wheel contact with rough surfaces: Comparison between a Greenwood/Tripp-like stochastical analysis and results for a deterministic steedy-state model Original Research Article
Pages 551-562
F. Bucher, T. Klimpel, K.L. Johnson

Some models of asperity contacts Original Research Article
Pages 563-571
M. Busquet, A.A. Torrance

Modelling surface texture evolution for a titanium carbide implanted tool surface undergoing wear Original Research Article
Pages 573-584
DI Fletcher, A Kapoor, K Steinhoff, N Schuleit

Life improvement of TiN-duplex-treated tool steel by tempering Original Research Article
Pages 587-597
Shingo Kawamura, Yoshio Haruyama, Nobuyasu Yokoi, Yoshitsugu Kimura, Kazuaki Shiozawa

Semi-analytical modeling of spalling life of spur and helical gears Original Research Article
Pages 599-605
Wangquan (Winston) Cheng, Wenke Tu

Particle detachment in elastically loaded contacts: a continuum mechanics based model Original Research Article
Pages 607-614
D. Clair, L. Baillet, Y. Berthier, M. Zbinden

Verification of friction laws on a complete industrial experimental device Original Research Article
Pages 617-627
G. Monteil, X. Rivoire, C. Roques-Carmes

An experimental approach to solving combustion engine valve and seat wear problems Original Research Article
Pages 629-640
R. Lewis, R.S. Dwyer-Joyce

The axial motion of the piston ring in the top ring groove of a gasoline engine Original Research Article
Pages 641-649
D.J.W. Barrell, M. Priest, C.M. Taylor

Mechanical modelling of high-speed tyre friction Original Research Article
Pages 653-660
D.F. Moore

The friction and adhesion of elastomers Original Research Article
Pages 661-672
B.J. Briscoe, A. Arvanitaki, M.J. Adams, S.A. Johnson

Acoustic noise emission in a model PMMA/steel fretting contact Original Research Article
Pages 673-681
B.J. Briscoe, A. Chateauminois, J. Chiu, S. Vickery

Numerical models of rotary lip seal seals Original Research Article
Pages 685-696
Richard F. Salant

Rotationally- and scale-invariant pattern recognition of tribological surfaces Original Research Article
Pages 697-708
P. Podsiadlo, G.W. Stachowiak

Adaptive techniques for elastohydrodynamic lubrication solvers Original Research Article
Pages 709-719
C.E. Goodyer, R. Fairlie, M. Berzins, L.E. Scales

Non-newtonian lubrication Original Research Article
Pages 723-732
JA Greenwood

Ordinary shear-thinning behavior in liquids and its effect upon EHL traction Original Research Article
Pages 733-742
Scott Bair

Modelling friction in elastohydrodynamic lubricated conjunctions Original Research Article
Pages 743-756
Pascal Ehret, Fabrice Bauget

Frictional behaviour of synthetic gear lubricants Original Research Article
Pages 759-768
B.-R. Höhn, K. Michaelis, A. Doleschel

An experimental/theoretical approach to modeling the viscous behavior of liquid lubricants under EHL conditions Original Research Article
Pages 769-778
N. Fang, L. Chang, G.J. Johnston, M.N. Webster, A. Jackson

Lubrication processes near wall asperities: a molecular dynamics study Original Research Article
Pages 779-785
A. Jabbarzadeh, J.D. Atkinson, R.I. Tanner

Comparison of non-Newtonian EHL models in high sliding applications Original Research Article
Pages 787-796
KJ Sharif, SJ Morris, HP Evans, RW Snidle

Contact stress analysis of layered solids with complex crack patterns Original Research Article
Pages 799-810
I.A. Polonsky, L.M. Keer

Contact fatigue in damaged railway track Original Research Article
Pages 811-817
R.S. Dwyer-Joyce, N. Gao

Observations of rough crack face contact under load Original Research Article
Pages 819-827
N. Hankinson, R.S. Dwyer-Joyce, B. Drinkwater, L. Morgan

Relationship between crack growth and wear mechanism of brittle materials during sliding contact Original Research Article
Pages 829-835
Hatsuhiko Usami, Junji Sugishita, Hiroshi Murase, Kei-ichi Inada

The consequence of performance increases of automotive engines on the modelisation of main and connecting-rod bearings Original Research Article
Pages 839-850
Ch. Grente, J.L. Ligier, J. Toplosky, D. Bonneau

Model experiments on automotive chain drive systems Original Research Article
Pages 851-861
A. Ward, R.S. Dwyer-Joyce

Analysis of the influence of cam surface waviness on the lubrication of an automotive cam and flat faced follower Original Research Article
Pages 863-872
D.S. Mehenny, C.M. Taylor

Inverted stick-slip friction between two molecularly smooth adhesive surfaces sliding in a solution Original Research Article
Pages 875-882
P. Richetti, C. Drummond, J. Israelachvili

Mar and scratch resistance of automotive clearcoats: development of new testing methods to improve coatings Original Research Article
Pages 883-893
P. Bertrand-Lambotte, J.L. Loubet, C. Verpy

A nano-indentation study of the mechanical propeties of thin surface layers affected by manufacturing processes Original Research Article
Pages 895-903
S.P. Moylan, S. Kompella, S. Chandrasekar, T.N. Farris

Extraordinary low friction of Ag film on the Si(111) as the function of substrate temperature and film thickness Original Research Article
Pages 905-915
R. Nakata, M. Goto, F. Honda

Written discussion—Contributions
Pages 917-957

List of delegates
Pages 959-974