Sintering ’87

Content: 
Front Matter....Pages i-xxxvi
International Institute for the Science of Sintering — The Community of the World’s Scientist and the Foundation of Sintering Future....Pages 1-6
The Powder Preparation of La2Ti2O7 And La4Ti9024 Using Amorphous Complex Colloid, and the Sintering Behavior of the Synthesized Powders....Pages 7-12
Preparation and Properties of Monodispersed Ceramic Powders....Pages 13-18
Occurrence of Priderite in the K20-Al203-TiO2 System....Pages 19-24
Preparation And Electrical Conductivity of Polycrystalline M+-β “-Ferrites (M+: K+, Rb+ And Cs+) withβ ”-Alumina Structure....Pages 25-30
Synthesis and Sintering of Platelike CaO-Stabilized Zr02 Crystals....Pages 31-36
Calcination And Two-Stage Sintering of Coprecipitated PLZT Powder Aged in Nitrate Solution....Pages 37-42
Preparation and Thermoelectric Properties of Sintered Boron Phosphide....Pages 43-48
Preparation of Silicon Carbide Powders by Chemical Vapor Deposition....Pages 49-54
Growth Of SiC Whiskers from SiC Particles....Pages 55-60
Preparation And Characterization Of Ceramic Powders From Organometallic Polymers....Pages 61-66
Synthesis Of Beta-SiC Powder From Ethylsilicate-Phenolic Resin....Pages 67-72
Pure A1n Prepared By Fluidized Nitoidation Technique....Pages 73-78
Simultaneous Grain Growth of CaO and MgO Phases during Sintering of Two Phase Mixtures....Pages 79-84
Behavior of Ti and/or Al added Ni Fine Particles during the Hydrogenation of Carbon Monoxide....Pages 85-90
Conversion Process of Gel Fibers Prepared from Zr(0·nC3H7) 4. By Sol-Gel Method to Zr02 Fibers....Pages 91-95
Application of Electron Beam Irradiation for Preparation of Sic Fiber from Polycarbosilane....Pages 96-101
Preparation of BaTi03 and LiNb3 Powders By Hydrothermal Anodic Oxidation....Pages 102-107
Production of High Purity Alumina from Acidic Waste Solution of Aluminum Etching Process....Pages 108-113
Sintering Behavior of Alkoxy-Derived Mullite Compacts....Pages 114-119
Size Control of Zr02-Aggregated Particles Produced By Hydrolysis and Application to Ceramics....Pages 120-125
Sinterability of Sol-Gel Derived Monolithic Oxide Precursor Gels....Pages 127-132
Study of The Sol-Gel Process of Alumina Using Aluminum Iso-Propoxide....Pages 133-138
Properties And Sintering of Gels Derived from Metal Alkoxide....Pages 139-144
Nucleation and Aggregation as a Mechanism for the Formation of Monodisperse Silica Spheres....Pages 145-150
Synthesis of Crystalline Ba(Zn1/3Ta2/3)03 Powder by Hydrolysis of Metal-Alkoxides....Pages 151-157
Preparation and Sintering of Fine Powders of Alkoxide-Derived Zinc Oxide....Pages 158-163
Epitaxial Effect of Seeding on Crystallization and Densification of Diphasic Al203-Mgo Xerogels....Pages 164-169
Rapidly Solidified Crystalline and Amorphous Powders — Problems and Perspectives....Pages 170-175
Rapidly Solidified Powder Produced by Counterrotating Process....Pages 176-181
Fundadamental Studies of a New Atomization Process and Properties of the Powders....Pages 182-187
Production of Rapidly Solidified Powders by the Rotating-Water-Atomization Process....Pages 188-193
Development of Elevated Temperature P/M Aluminum Alloy by Rapid Solidification Processing....Pages 194-199
Formation and Consolidation of Mechanically Alloyed Ti-Cu Amorphous Powders....Pages 200-205
Status and Trends in the Production of Clean Metal Powder....Pages 206-211
The Slip Line Method of Sintered Powder Materials under Condition of Axial Symmetry....Pages 212-217
Selection of Carboxylates as Dispersant for Alumina in Slip Casting....Pages 218-223
Metal Injection Molding....Pages 224-229
Characterization of CIP Formed Powder Compacts....Pages 230-236
Excess Energy Stored in Fine Particle System and Material Transport by Diffusion as its Relaxation Process....Pages 237-242
Sintering of Nacl Powders....Pages 243-248
Pressure-Sintering Of Ultrafine Metal Powders....Pages 249-254
Sintering of Plated Iron Powders....Pages 255-260
Solid-State Sintering as a High Temperature Deformation Process....Pages 261-266
Variables Controlling Sinterability Of Oxide Ceramics....Pages 267-272
Interface Migration During Sintering Induced by Coherency Strain....Pages 273-278
Packing of Planar Particles....Pages 279-284
A Critical Assessment of Computer Simulation and Numerical Modelling in Sintering Studies....Pages 285-290
Some Contributions of Electron Theory of Sintering in Real Systems....Pages 291-296
High Temperature Vaporization from Lithium Silicates....Pages 297-302
Control Over β-Dicalcium Silicate and Discussion on its Phase Transformation Mechanism....Pages 303-308
Determination of Complete Orientation Distribution Function in Hexagonal Metal by the Zero-Range Method With Optimal Zero-Range....Pages 309-314
New Understanding of Densificaticn Process....Pages 315-321
Re-Examination of the Intermediate and Final Stages of Sintering Controlled by Diffusion....Pages 322-327
Sintering and Grain Growth in Tetragonal and Cubic Zirconia....Pages 328-333
Sintering of Aggregated MGO Powders....Pages 334-339
Grain Boundary Energy in MgO Bicrystals....Pages 340-345
Sintering of Narrow Size Distribution Alumina....Pages 346-351
A Novel Firing Concept to Ceramics Sintering....Pages 352-356
Effect of A12Ti05 Decomposition on the Microstructure and Mechanical Properties of Ti02-Added Alumina Ceramics....Pages 357-362
Influence of Additives on Discontinuous Grain Growth During Liquid Phase Sintering of Barium Titanate....Pages 363-368
Sintering of Yttrium Aluminum Garnet....Pages 369-374
Anisotropy in the Dimensional Change of Metal Powder Compacts During Sintering....Pages 375-380
Texture and Its Control in Carbons....Pages 381-386
Structure Parameters for Gas Transport Through Metallurgical Sintered Materials in the Course of Reactions....Pages 387-392
The Relation between Sinterability and Initial Packing Density in The Loosely Sintered Cu-Sphere Compact....Pages 393-398
Fabrication, Forming, and Firing of Thoria and Thoria-Urania Fuel Pellets....Pages 399-404
Fabrication and Characterization of Sintered Synroc Crystalline Ceramics....Pages 405-410
In SITU Experiments of Sintering Process by High Voltage Electron Microscopy....Pages 411-416
Oxide-Oxide Interfaces : HREM Observations and Modelling....Pages 417-422
In-Situ Analysis Of Sintering Reactions Of Iron Ore Fines By A “Dynamic Sem”....Pages 423-428
Structure of Alumina/Niobium Diffusion-Bonded Interface....Pages 429-434
High-Resolution Electron Microscope Study on Crystal Structure of Interlayer in Sintered Fe/FeO Compact....Pages 435-440
Sintering of ZrC-Al2O3 Composites....Pages 441-446
An Update on the Theory of Liquid Phase Sintering....Pages 447-452
Mechanism of Liquid Phase Sintering in Fe-Cu, Cu-Ag and High Speed Steel....Pages 453-458
Effect of Entrapped and External Gas Pressure on Densification During Liquid Phase Sintering....Pages 459-464
Effect of Binder Composition on Sintering of Tungsten Based Heavy Alloys....Pages 465-470
Special Sintering of Tungsten and Tungsten Carbide by Using a Ni-P Alloy....Pages 471-474
The Sintering of Nd-Fe-B Magnets....Pages 475-480
Sintering of Zircon in the Presence of Liquid Phase....Pages 481-486
Plasma Sintering of Ceramics....Pages 487-492
Plasma Sintering....Pages 493-498
Potentiality of High Pressure Combustion Sintering to Produce Ceramic Based Multi-Phase Components....Pages 499-504
Self Propagating Reaction Sintering of TiNi Alloy....Pages 505-510
Application of Synthesis Process by a Self-Propagating Reaction....Pages 511-516
Reactivity of Powders During the Combustion Synthesis of Metallic and Ceramic Phases....Pages 517-522
The Key Point of Shock Processing for Advanced Materials....Pages 523-527
Preparation of Diamond Sintered Compact by Reaction Sintering....Pages 528-533
Synthesis of Sintered Diamond with High Hardness and its Properties....Pages 534-539
Reaction Analysis of the Combustion Syntheses of Transition Metal Nitrides....Pages 540-544
Self-Propagating High-Temperature Synthesis of Intermetallic Compounds....Pages 545-550
The Structure and Properties of Metals Sintered by the Method of Electric Contact Heating....Pages 551-556
Isodynamic Compaction of Titanium Powder....Pages 557-562
The Behaviour of Rapidly Solidified Steel Powders Under the Action of Shock Wave....Pages 563-568
Dynamic Pre-Heating of P/M Al-Si-X Alloy Prior to Hot Forming....Pages 569-574
Creep Behaviour of Dispersion-Hardened Al-4%Mg Alloy by Mechanical Alloying....Pages 575-581
High Performance P/M Al Alloys....Pages 581-586
Effect of Heat Treatment on the Sintered Ti-Fe Alloys....Pages 587-592
Processing and Characteristics of P/M-Shape Memory Alloys....Pages 593-598
Superplastic Forming of Zn-Al Pre-Alloy Powder....Pages 599-604
Rapidly-Quenched Intermetallic Compounds, TiAl and Al3Ti....Pages 605-610
Preparation and Properties of Dispersion Strengthened Cu-A12O3 Powder using Al-alkoxide....Pages 611-616
Mechanical Alloying of Ni-Base Superalloy....Pages 617-622
Fabrication of Solid State Amorphized Metallic Powders by Mechanical Alloying....Pages 623-628
Fabrication Technologies and Properties of P/M Superalloys and Ti Alloys....Pages 629-634
High-Field Superconductivity Of Si-(Pb,Bi) Alloys Prepared by Mechanical Alloying of Elemental Powders....Pages 635-640
Vacuum Hot Pressing of the Iron-Base High Alloyed Powders....Pages 641-646
Preparation of Particle-Dispersion-Strengthened Copper by the Application of Mechanical Alloying....Pages 647-652
Trends in Advanced P/M Alloys....Pages 653-658
Properties of High Iron Carbon Powders....Pages 659-664
Influence of Molybdenum on Properties and Microstructure of Sintered Alloyed Steels....Pages 665-670
Effect of Dispersion and Coating of Rare Earth Oxide Particles on the Oxidation of Sintered Heat Resisting Alloys....Pages 671-676
Corrosion Test Methods Study for P/M Austenitic Stainless Steels....Pages 677-682
New Amorphous Cu-V-(Si OR Ge) Alloys Prepared by Mechanical Alloying of Elemental Powders....Pages 683-688
Mechanical Properties of ODS Thin Sheet from Mechanically Alloyed Cu-Al2O3 Powder....Pages 689-694
Characteristics of Composite-Type Alloy Steel Powders Containing Ni, Cu and Mo....Pages 695-700
Lower Temperature Sintering of Iron-Tin-Copper Compact....Pages 701-706
Sintering of 434L Ferritic Stainless Steel-A12O3 Particulate Composites....Pages 707-712
Mechanical Properties and Densification Mechanism of a High Strength Sintered Steel....Pages 713-718
Hot Isostatic Pressing of Metallic and Ceramic Powders....Pages 719-724
Analysis of Hot Isostatic Pressing Alumina as a Model Material....Pages 725-730
Microstructural Development During Sintering and Hipping of Some Multicomponent Systems....Pages 731-736
Numerical Simulation of the Densification Behavior of Metal Powder During Hot Isostatic Pressing....Pages 737-742
Sintering in isostatically hot pressed materials....Pages 743-748
Recent Progress in Cip and Hip Systems....Pages 749-754
Hip Technology at Nippon Kokan....Pages 755-760
Sinter-Hip Furnaces - Sintering and Compacting in a Combined Cycle....Pages 761-766
Corrosion- & Wear-Resistant Bimetallic Cylinder for Injection Molding Produced by the HIP Process....Pages 767-772
HIP of Zn2TiO4 Prepared by Coprecipitation Method....Pages 773-778
R-Curve Behavior of Ceramic Materials....Pages 779-784
Flaw-Size and Flaw-Orientation Distributions of Structural Ceramics....Pages 785-790
Proof Testing by Thermal Shock....Pages 791-795
Deformation Mechanisms in Various Forms of Sic and the Implications of these Results Regarding Densification in B-Containing Material....Pages 796-801
Characterization of Creep in the Pressureless Sintered Alumina, Chromia-Alumina and Molybdenum-Alumina....Pages 802-806
Creep and Creep Cavitation in Polycrystalline Mg0: Effect of Intergranular Second Phase....Pages 807-812
Strength and Thermal Conductivity of Highly Porous Sintered Compacts....Pages 813-818
Acoustic Emissions from Whisker Reinforced Glass Composites with Special Reference to Microcracking....Pages 819-824
Ultrasonic Spectroscopic Analysis for Pore Structure in Cu-Sintered Compact....Pages 825-830
Ultrasonic Evaluation of Pore Fraction and Mean Grain Diameter in Fe and Fe-Cu Sintered Compacts....Pages 831-836
Thermal Expansion of Cordierite Ceramics-Effects of Doping with Alkali and Heat Treatments....Pages 837-842
Evaluation of Impact Fracture Properties at Elevated Temperatures by Instrumented Charpy Test....Pages 843-847
Cyclic Fatigue Test of Fine Ceramics by using Piezostack....Pages 848-853
Thermally Stimulated Exoelectron Emission from Aluminum Nitride Ceramic....Pages 854-859
Preparation of High-Performance PTCR Materials using a New Sintering Procedure....Pages 860-865
Microstructure and Humidity Sensitive Characteristics of TiO2-Nb2O5 Sintered Specimens....Pages 866-871
Slag Infitration into Zircon Brick and its Effect on the Local Erosion of Joints of Ladle Lining....Pages 872-877
Liquid Phase Sintering and Dielectric Properties of SrTiO3 Ceramics....Pages 878-883
Low Temperature Sintering of Lead-Based Piezoelectric Ceramics with Transient Liquid Phase....Pages 884-889
Preparation of the Translucent Sr1-xBaxNb2O6 Ceramics....Pages 890-895
Grain Size Dependence of Actuator Characteristics in Electrostrictive PLZT....Pages 896-901
Monomorph Actuator....Pages 902-907
Chemical Vapor Deposition of Aluminum Nitride....Pages 908-913
The Thermal Conductivity of Sintered A1N-YF3 System....Pages 914-919
Sinterability of Aluminum Nitride....Pages 920-925
Post Fabrication Processing of Silicon Nitride Based Ceramics....Pages 926-931
Influence of Powder Characteristics on Some Processing Steps of Silicon Nitride Ceramics....Pages 932-937
Grain Boundary Phases of Sintered Silicon Nitride....Pages 938-943
Effect of Impurities on Sintering of Silicon Nitride....Pages 944-949
Kinetic Investigation of Nitriding and Postsintering of Si/Si3N4 Systems....Pages 950-955
The Effects of Sintering Conditions on High Temperarture Properties of Sintered Si3N4 Body....Pages 956-961
On the α→ß Transformation of Sintered Silicon Nitride using Ultra Fine Particles as Additives....Pages 962-967
Effect of Heat Treatment on the Fracture of Silicon Nitride....Pages 968-973
Tensile Strength Properties of Sintered Silicon Nitride....Pages 974-979
Densification and Phase Transformation during Sintering of Silicon Nitride Ceramics....Pages 980-985
Anisotropic Grain Growth During Final Stage Sintering of Silicon Nitride Ceramics....Pages 986-991
Grain Boundaries in SiC with no Additives....Pages 992-997
Microstructure and its Control in Reaction-Sintered Silicon Carbide....Pages 998-1003
Sintering Behavior and Properties of SiC-TiC Ceramic Composites....Pages 1004-1009
Tensile Strength Properties of Sintered Silicon Carbide....Pages 1010-1015
Sintering of Silicon Carbide....Pages 1016-1021
Non-Oxide Ceramics Sintering by a New Process Thermite Reaction Assisted Sintering & Synthesis Under High Pressure (THP) Process —....Pages 1022-1027
Preparation of α-Sialon Powders from Alkoxide-Derived Oxides....Pages 1028-1033
Two-Phase β′-α′ Sialon Ceramics....Pages 1034-1039
Mechanical Properties of Hot-Pressed Silicon Oxynitride Ceramics....Pages 1040-1045
Formation and Properties of Oxynitride Glasses in the System Zr-Y-Si-Al-O-N....Pages 1046-1051
Sinterability and Mechanical Properties of Sialon Materials with Different Amounts of Yttria....Pages 1052-1057
Hydrothermal Corrosion of Sialon Ceramics....Pages 1058-1063
Sintering of Magnesia Partially Stabilized Zirconia (Mg-PSZ)....Pages 1064-1069
Fabrication, Testing, Evaluation, and Applications of Zirconia Ceramics....Pages 1070-1075
Environment Effect on Phase Stability in Y-TZP Ceramics....Pages 1076-1081
Sintering of Ternary Zirconia Ceramics....Pages 1082-1087
Low-Temperature Sintering of Y-TZP and Y-TZP-AL2O3 Composites with Transition Metal Oxide Additives....Pages 1088-1093
Evolution of Microstructure in Yttria Partially-Stabilized Zirconia....Pages 1094-1099
Thermal Shock Resistance of ZrO2 Based Materials....Pages 1100-1105
Effect of Environmental Gas on Tetragonal to Monoclinic Transformation in Y-TZP....Pages 1106-1111
Improvement of Resistance to Thermal Degradation of Mg-PSZ....Pages 1112-1117
Grinding of Sintered Zirconia....Pages 1118-1123
The Fabrication and Application of Sintering Materials for Energy Conversion Technique....Pages 1124-1129
Powder Metallurgical Fabrication of the Thermal-Stress Relief Type of Functionally Gradient Materials....Pages 1130-1135
Low-Temperature Sintering of Mn-Zn Ferrites....Pages 1136-1141
Fe-50%Co Sintered Alloy....Pages 1142-1148
CeDidymium-Fe-B Permanent Magnets Prepared by Liquid Phase Sintering....Pages 1149-1154
The Sintering of Soft Magnetic Fe-Si Powder Materials with FeS Liquid Phase....Pages 1155-1160
A New Proposition of the Chemically Heterogeneous Sintered Soft Magnetic Materials, Theory and Practice....Pages 1161-1166
The Calculation and the Measurement of the Distribution of Eddy Currents in Chemically Heterogeneous Sintered Soft Magnetic Materials....Pages 1167-1172
Microstructural Design of Wear Resistant Ceramic Systems for Cutting Tool Applications....Pages 1173-1178
Densification Mechanism Of TiB2-TaB2-CoB Based Ceramics....Pages 1179-1184
Pressureless Sintering of Alumina-Titanium Carbide Composites for Cutting Tool Applications....Pages 1185-1190
Ceramic Grinding by Sintered Cast Iron Bonded Diamond Grinding Wheel....Pages 1191-1196
Coated Cemented Carbide Cutting Tools....Pages 1197-1202
Microstructure and Mechanical Properties of Titanium-Carbonitride Base Cermets....Pages 1203-1208
Sintered Diamond Composite with a Tantalum Foil Barrier....Pages 1209-1214
Titanium-Carbonitride-Based Hard Alloys for Cutting Tools....Pages 1215-1220
The Microstructure and Properties of Sintered Mo2FeB2 Base Hard Alloys....Pages 1221-1226
Pressureless Sintering and Mechanical Properties of TiB2 Compacts....Pages 1227-1229
Characterization of Fine Hydroxyapatite Powders Synthesized Under Hydrothermal Conditions....Pages 1230-1233
Apatite Porous Ceramics Prepared by the Hydration and Hardening Method....Pages 1234-1238
Solid-State Reactions and Sintering of Zr02-Added Hydroxyapatite Ceramics....Pages 1239-1244
Effect of Ca/P Ratio upon Microstructure and Sinterability of Calcium Hydroxyapatite....Pages 1245-1250
Sintering Characteristics and Mechanical Property of Hydroxyapatite....Pages 1251-1256
Preparation and Sintering of Hydroxyapatite Ceramics....Pages 1257-1262
Influence of Whisker Volume Fraction on the Mechanical Properties of SiC Whisker Reinforced 6061 Aluminum Alloy Composites....Pages 1263-1268
Fabrication of Fiber Reinforced Silicon Carbide Composites....Pages 1269-1274
Crack Propagation Studies in a Whisker-Glass Composite....Pages 1275-1280
Microstructure and Mechanical Properties of Sic-Whisker/Y-TZP Composite....Pages 1281-1286
Crystallinity and Orientation of SiC Coated on Carbon Fiber....Pages 1287-1295
Solid State Bonding of SiC to Nb....Pages 1296-1301
Solid State Reaction between Alumina and Iron....Pages 1302-1307
Nitride and Carbide Formation onto Ceramics by Molten Salt Dipping Method....Pages 1308-1313
Characteristics of the Alumina-Niobium Solid State Bonding Interface....Pages 1314-1319
Reactivity of Sintered SiC with Metals....Pages 1320-1325
Silicon Carbide-Nickel Interfacial Reaction and Structure....Pages 1326-1331
Microstructure and Critical Current Densities of Superconducting Ceramics....Pages 1332-1337
Fabrication of High-Tc Superconducting Ba2Y1Cu3O7-0 Ceramics by a Partial Oxalate Method and Evaluation of the Materials....Pages 1338-1343
Preparation and Chemical Properties in High-TC Superconducting (Y,Sc)-Ba-Cu-O Ceramics....Pages 1344-1349
Superconductivity and Irradiation Effects in Ln-Ba-Cu Oxide Superconductors....Pages 1350-1355
Oxygen Nonstoichiometry of High-Tc Superconducting Oxides....Pages 1356-1361
Effect of Microstructure on the Jc of YBa2Cu3O7-x Bulk Materials....Pages 1362-1367
Thin Film Processes for Fine Ceramics....Pages 1368-1372
Tape Casting of YBa2Cu3O7-x Superconductor....Pages 1373-1378
Processing And Critical Current Densities of Oxide Superconductors....Pages 1379-1384
Calcination, Milling And Pressing of Sinterable YBa2Cu3O7-σ Powders from Mixed Oxides and Carbonates....Pages 1385-1390
Effects of Sintering Atmosphere on Critical Current Density in The Y-Ba-Cu-O System....Pages 1391-1396
Back Matter....Pages 1397-1402
....Pages 1403-1408