Innovations in Biomedical Engineering (Lecture Notes in Networks and Systems, 409)

Contents
Experimental Research in Biomedical Engineering
Furniture for Elderly People
	1 Introduction
		1.1 Purpose of the Work
		1.2 Methodology
	2 Analysis of the Problem
		2.1 Overview of the Solutions
	3 Project
		3.1 Conceptual Work
		3.2 The Evolution of the Project
	4 Conclusion
	References
Thermal Stabiliser of Knee Joint
	1 Introduction
	2 Materials and Methods
	3 Results of Investigations
	4 Android System Application
	5 Discussion
	6 Summary
	References
MONITORING HELMET—The Use of Thermal Imaging to Monitor the Epidemic Threat Caused by the Corona Virus
	1 Introduction
	2 Temperature Measurement
	3 Materials and Research Methodology
	4 Research Results
	5 Conclusions
	References
Electronic Stethoscope as a Tool Supporting Physician\'s Work During the Covid-19 Pandemic
	1 Introduction
	2 Available Types of Stethoscopes
	3 Description of Wireless Stethoscope Under Consideration
	4 Summary
	References
The Epidemiological Analysis of the Atlantoaxial Joint Instability in Children and Youth with Down Syndrome Attending Special Facilities in Upper Silesia (Poland) Based on the Special Olympics Radiological Examination
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Trends in Development of Balance Dysfunctionalities Rehabilitation Equipment Using Virtual Reality—A Literature Review
	1 Introduction
	2 Methodology
		2.1 Search Strategy
		2.2 Search Strategy
		2.3 Review Process
	3 Results
	4 Discussion
	5 Summary
	References
Biomechanical Assessment of Selected Motion and Cognitive Exercises in the ``Neuroforma\'\' Rehabilitation System
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Thermovision-Based Human Body Temperature Measurement Supported  by Vision System
	1 Introduction
	2 Methodology
		2.1 Selecting the Measurement Area
		2.2 Test Stand
		2.3 Face Recognition and Temperature Measurement Algorithm
		2.4 Implementation to Nazca BMS
	3 Results
	4 Discussion
	References
Critical Analysis of Recreational Activities as a Method to Reduce Obesity
	1 Introduction
	2 Motivation and Description of the Problem
	3 Basic Medical and Biomechanical Problems of Obesity - Literature Review
	4 Body Mass Reduction Methods
		4.1 Critical Introspection of the Effects of Excessive Physical Activity in the Obese Patients
		4.2 Physical Activity as Motivating and Rehabilitating Factor
		4.3 Conclusions and Findings
	References
Assessment of the Time of Electromechanical Muscle Response to a Given Rhythmic Sound Stimulus
	1 Introduction
		1.1 Total Response Time - TRT
		1.2 Electromechanical Delay Time - EMD
		1.3 Rhythmic Auditory Stimulation
		1.4 Aim of the Study
	2 Methodology
	3 Results
	4 Conclusion
	References
Is the Coronavirus Pandemic Going to `Kill\' the Physical Activity of Young People?
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Therapeutic Use of TMS in Psychiatric Disorders
	1 Introduction
	2 Terapeutic Use TMS
		2.1 Depression
	3 Conclusion
	References
Influence of Back Muscle Activation in Pathological Posture Assessment Based on Thermal Imaging
	1 Introduction
	2 Materials and Methods
		2.1 Thermal Images
		2.2 Data Acquisition
		2.3 ROI Descriptors
		2.4 Statistical Data Analysis
		2.5 Data Classification
	3 Results
		3.1 Statistical Data Analysis
		3.2 Data Classification
	4 Discussion and Conclusion
	References
Body Postures During Sitting in Different Positions
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Engineering of Biomaterials
Adhesion of Staphylococcus Aureus on Various Biomaterial Surfaces
	1 Introduction
	2 Materials and Methods
		2.1 Potentiodynamic Test
		2.2 Impedance Test
		2.3 Testing the Adhesion of Microorganisms to the Surface
	3 Results and Discussion
		3.1 Potentiodynamic Test
		3.2 Impedance Test
		3.3 Testing the Adhesion of Microorganisms to the Surface
	4 Conclusions
	References
Developing the Technology for the Production of Personalized Polylactide Plates for Bone Assemblies Reinforced with Glass Fiber
	1 Introduction
	2 Materials
		2.1 Samples
		2.2 Manufacturing Technology
	3 Methods
		3.1 Tensile Test
		3.2 Bending Test (Three-Point)
	4 Results
		4.1 Tensile Test
		4.2 Bending Test (Three-Point)
	5 Discussion
	6 Conclusions
	References
Determination of the Breaking Force of Surgical Threads with the Use of a Testing Machine
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	References
Study of Physical Properties of Additively Manufactured and Post-processed 3D Porous Structures Intended for Implants
	1 Introduction
	2 Materials and Methods
		2.1 Determination of Geometry
		2.2 Macroscopic Observations
		2.3 Mass Measurement
		2.4 Structure Porosity Testing Using Gas Pycnometry
		2.5 Compression Test
	3 Results and Discussion
		3.1 Results of Geometry Measures
		3.2 Macroscopic Observations
		3.3 Results of Mass Measurements
		3.4 Structure Porosity Testing Using Gas Pycnometry
		3.5 Results of the Static Compression Test
	4 Conclusion
	References
Impact of 3D Printing Materials on Bone Phantom Features
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusions
	References
Porous Structure and Surface Chemistry of Biomorphous Composite Derived from Carbonized Yucca Covered by Thin Film of Chitosan and Its Application to Remove Hazardous Substances
	1 Introduction
	2 Material and Methods
		2.1 Preparation of Monolithic Supports and Composites
		2.2 The Microscopic Studies
		2.3 The Densitometric and Ultrasonic Measurements
		2.4 The Measurements of Surface Area and Pore Size Distribution
		2.5 The Surface Chemistry Studies
		2.6 The Adsorption Activity Studies
	3 Results and Discussion
		3.1 Characterization of the Porous Structure
		3.2 Determination of Functional Groups
		3.3 Adsorption Properties
	4 Conclusion
	References
Novel Hemocompatible Thiol-yne Based Photopolymers Obtained by the Advanced Stereolithography (SLA) Processing with Strongly Improved Surface Smoothness by a Novel Exposition Approach for Anti-aliasing
	1 Introduction
	2 Materials and Methods
		2.1 Material Synthesis
		2.2 Mechanical Properties
		2.3 Haemocompatibility
		2.4 Cytotoxicity-Lactate Dehydrogenase (LDH) Study
	3 Results
		3.1 Mechanical Properties
		3.2 Haemocompatibility
		3.3 Cytotoxicity Measured on Basis of the Lactate Dehydrogenase LDH
	4 Discussion and Summary
	References
Evaluation of the Physicochemical Properties of Passive Layers Produced on NiTi Alloys for Use in the Cardiovascular System
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Research on the Influence of Anodic Oxidation Parameters on the Corrosion Resistance of Titanium Alloys
	1 Introduction
	2 Material and Methods
		2.1 Material
		2.2 Potentiodynamic Studies
		2.3 Surface Roughness
		2.4 Macroscopic Observations
	3 Results
		3.1 Potentiodynamic Studies
		3.2 Surface Roughness
		3.3 Macroscopic Observations
	4 Conclusion
	References
Flexural Modulus of Synthetic Femur Polyurethane Foam Bone Components Based on Three-Point Bending Tests
	1 Introduction
	2 Materials and Methods
		2.1 Beam Samples
		2.2 Testing Procedure
		2.3 Elastic Flexural Modulus Identification
	3 Results and Validation
	4 Discussion
	References
Informatics and Modelling in Biomedical Engineering
The Application for Reading Comprehension and Reading Speed Test
	1 Introduction
	2 Material and Methods
		2.1 Experiment Setup
		2.2 Signal Processing
		2.3 Software
	3 Results
		3.1 Performance Measures of the Algorithm
		3.2 Application Performance
	4 Conclusion and Discussion
	References
Numerical Investigations of Mechanical Properties of Head Protection Systems Against the Effects of Dynamic Loads
	1 Introduction
	2 Materials and Methods
		2.1 Model Development and Materials
		2.2 Simulation Conditions
	3 Results and analysis
	4 Conclusions
	References
Influence of the Reorientation Function on Brodmann Areas Detection Efficiency
	1 Introduction
	2 Material and Methods
		2.1 Subjects and FMRI Data Acquisition
		2.2 Data Analysis
	3 Results and Discussion
	4 Conclusion
	References
Comparison and Evaluation of Models for Predicting Immunogenicity of Viral Antigens of the pMHC Complex from Murine Models
	1 Introduction
	2 Material and Method
		2.1 Data Preparation and Processing
		2.2 Machine Learning Prediction Model
		2.3 Training and Validation of Prediction Model
	3 Result
	4 Conclusion
	References
Finite Element Analysis of Lumbar Disc Implant, in Aspect of Treating Degenerative Changes in Spine
	1 Introduction
	2 Designing Custom Made Implant
		2.1 Boundary Conditions
		2.2 Results of Numerical Experiment
		2.3 Optimization
	3 Conclusion
	References
Controlling of the Upper Limb Prosthesis Using Camera and Artificial Neural Networks
	1 Introdution
	2 Methods
		2.1 Applied Grasp Subset
		2.2 Image Databse
		2.3 Image Preprocessing
	3 Results
	4 Conclusions
	References
Lateral Tibial Condyle Fracture Stabilization—A Numerical Analysis
	1 Introduction
	2 Materials and Methods
	3 Results
		3.1 Stress Distribution
		3.2 Displacement Distribution
	4 Discussion
	5 Conclusion
	References
Extreme Compression of the Electrocardiographic Signals Using Matching Persuit
	1 Introduction
		1.1 Diagnostics via ECG
		1.2 Wireless ECG Monitoring
		1.3 Objective
	2 Description of the Implemented Method
		2.1 Signal Compression Using Matching Pursuit
		2.2 Dictionary Created Using Dictionary Learning Technique
		2.3 Convert to Byte Array
	3 Experimental Results and Discussion
	4 Conclusions
	References
Experimental Study the Blood Flows in a Transparent Models of a Blood Vessels with Bifurcation—Preliminary Report
	1 Introduction
	2 Laboratory Stand Construction
	3 Results
	4 Summary
	References
ARM-200 - Upper Limb Rehabilitation Robot
	1 Introduction
	2 Mechanical Design of the Robot
	3 Robot Control System
	4 Conclusions
	References
523767_1_En_35_Chapter_OnlinePDF.pdf
	35 Correction to: Porous Structure and Surface Chemistry of Biomorphous Composite Derived from Carbonized Yucca Covered by Thin Film of Chitosan and Its Application to Remove Hazardous Substances
		Correction to: Chapter 20 in: M. Gzik et al. (eds.): Innovations in Biomedical Engineering, Lecture Notes in Networks and Systems 409, https://doi.org/10.1007/978-3-030-99112-8_20