Applications and Non-metals. Advances in Research on The Strength and Fracture of Materials

Content: 
TITLES IN THIS SERIES, Page ii
Dedication, Page iii
Front Matter, Page v
Copyright, Page vi
Foreword, Page xv, B.L. Averbach
Foreword, Page xvi, Roy W. Nichols
Preface, Pages xvii-xx
Acknowledgements, Page xxi
International Congress on Fracture, Pages xxii-xxv
Fourth International Conference on Fracture, Pages xxvi-xxvii
Standard Nomenclature List, Pages xxviii-xxxi
Conversion Units, Page xxxii
THE ROLE OF ACOUSTIC EMISSION IN FRACTURE TOUGHNESS TESTING, Pages 525-530, M.A. Hamstad, A.K. Mukherjee
THE RELATION BETWEEN STATIC AND DYNAMIC FRACTURE TOUGHNESS OF STRUCTURAL STEELS, Pages 531-539, B. Vlach, J. Man, M. Holzmann, Z. Bílek
EXPERIMENTAL CORRELATIONS BETWEEN DYNAMICAL TOUGHNESS CHARACTERISTICS OF PRESTRAINED PRESSURE VESSEL STEELS, Pages 541-547, V. Safta, A. Bernath, T. Moisă
ON THE DYNAMIC FRACTURE TOUGHNESS DETERMINATION BY INSTRUMENTED IMPACT TESTS, Pages 549-553, R. Arone
THE ROLE OF NDT IN THE FRACTURE MECHANICS EVALUATION, Pages 555-563, L.K.L. Tu, B.B. Seth
CHARTING THE FRACTURE TOUGHNESS CHARACTERISTICS OF CASTINGS USING THE DOUBLE TORSION METHOD, Pages 565-572, C.W. Ten Haagen, J.T. Berry
DIRECT MEASUREMENT OF PLASTIC ZONES IN SIDE GROOVED FRACTURE TOUGHNESS SPECIMENS, Pages 573-581, S. Nunomura, Y. Higo, K. Seto
A FRACTOGRAPHIC STUDY ON EVALUATION OF FRACTURE TOUGHNESS, Pages 583-592, H. Kobayashi, K. Hirano, H. Nakamura, H. Nakazawa
THE INFLUENCE OF SPECIMEN CONFIGURATION ON YIELD ZONE FORMATION AND FRACTURE RESISTANCE, Pages 593-600, N.J. Adams, H.G. Munro, B.K. Neale
METHODS OF EXPERIMENTAL DETERMINATION OF STRESS-INTENSITY FACTORS OF SIMPLIFIED GEOMETRIES OF STRUCTURAL PARTS, Pages 601-608, W. Seidl
DEVELOPMENT OF A C-SHAPED FATIGUE SPECIMEN, Pages 609-615, B. Mukherjee
THE EFFECT OF STRIKING VELOCITY ON PERFORATION ENERGY FOR MILD STEEL PLATES, Pages 617-620, S. Maj, C.J. Osborn
DETERMINATION OF CRITICAL STRESS-INTENSITY FACTORS UNDER MIXED MODE LOADING CONDITIONS BY SHADOW-OPTICS, Pages 621-626, U. Seidelmann, U. Soltész, H. Kordisch
FRACTURE MECHANICS OF TIDAL FLEXURE CRACKS IN FLOATING ICE SHELVES, Pages 627-631, R.A. Smith
PRESSURE VESSEL STRENGTH ANALYSIS BY THERMAL SHOCK, Pages 633-637, Y.F. Balandin, I.V. Gorynin, G.P. Karzov
STRENGTH OF WELDED THICK WALLED NON-HEAT TREATED STRUCTURAL ELEMENTS, Pages 639-645, I.R. Krjanin, G.S. Vasilchenko, P.F. Koshelev, S.E. Sinadsky
A CRACK NEAR DOUBLY RIVETED STIFFENERS, Pages 647-656, Wang Ke-Jen, D.J. Cartwright
TEST AND ANALYSIS OF CRACKED LUG, Pages 657-664, A.F. Liu, H.P. Kan
FRACTOGRAPHIC ANALYSIS OF SHEAR FRACTURE OF A FORGED STEEL AXLE SPINDLE, Pages 665-673, D.K. Felbeck
FRACTURE TOUGHNESS AND FATIGUE CRACK PROPAGATION BEHAVIOUR OF SEVERAL CAST STEELS FOR STRUCTURAL COMPONENTS OF HYDRO-TURBINES, Pages 675-682, K. Takai, K. Matsumoto, M. Yamashita, M. Morita
INVESTIGATION OF THE FRACTURE TOUGHNESS OF CONSTRUCTIONAL STEELS IN CYCLIC LOADING, Pages 683-686, V.T. Troshchenko, V.V. Pokrovsky, A.V. Prokopenko
FRACTURE TOUGHNESS OF TURBINE ROTOR SHAFT AND VALIDITY CRITERION FOR KIC, Pages 687-697, K. Ikeda, M. Aoki, H. Kikuchi, U. Schieferstein, C. Berger
PREDICTION OF FAIL-SAFE STRENGTH OF REALISTIC STIFFENED SKIN AIRCRAFT STRUCTURES, Pages 699-704, H. Vlieger
INITIATION COD AS A FRACTURE CRITERION FOR ZR-2.5% Nb PRESSURE TUBE ALLOY, Pages 705-711, L.A. Simpson
A STUDY OF CONDITIONS LEADING TO FRAGMENTATION ON FAILURE OF ZIRCONIUM ALLOY PRESSURE TUBES, Pages 713-721, B.W. Pickles, E.R. Johnson, H. Cocks
CRACK NUCLEATION IN 316 STAINLESS STEEL FUEL CLADDING, Pages 723-731, D. Lee, R.A. Rand, G.G. Trantina
FRACTURE MECHANICAL ASPECTS OF ABRASIVE FRICTION, WEAR, AND CHIP FORMATION OF A γ-Fe-Ni-Al STEEL, Pages 733-739, K-H. Zum Gahr
FRACTURE STRENGTH OF A NOTCHED BEAM WHEN A SMALL FATIGUE CRACK EMANATES FROM THE NOTCH ROOT, Pages 741-749, A. Mubeen, S.N. Bandyopadhyay
ON THE DETERMINATION OF THE CRACK ARREST- TOUGHNESS, Pages 751-756, J.F. Kalthoff, J. Beinert, S. Winkler, J. Blauel
INITIATION OF CRACKS AT DELAYED FRACTURE OF A HIGH STRENGTH STEEL, Pages 757-764, M. Nagumo
BRITTLE FRACTURE DESIGN OF STRUCTURES, Pages 765-772, Yu.N. Rabotnov, G.S. Vasilchenko, P.F. Koshelev, G.N. Merinov
FRACTURE PROCESSES AND FRACTURE TOUGHNESS IN POWDER FORGED STEELS, Pages 773-780, R.M. Pilliar, W.J. Bratina, R.A. Blackwell
INCREASING THE FRACTURE TOUGHNESS OF 18 NI-MARAGING STEEL WELD METAL, Pages 781-789, K. Seifert, H. -D. Steffens
FRACTURE TOUGHNESS OF THERMALLY FATIGUED MATERIAL, Pages 791-799, N.G. Ohlson
ON THE INFLUENCE OF LOW-CYCLE DAMAGE ON FRACTURE TOUGHNESS, Pages 801-807, K. Kálna
TOUGHNESS - POROSITY PHENOMENA, Pages 809-818, R.E. Cooper
FRACTURE BEHAVIOUR OF NODULAR GRAPHITE IRON AT LOW TEMPERATURES, Pages 819-827, J. Pirs, A.H. Shabaik
LOW-TEMPERATURE FATIGUE CRACK PROPAGATION, Pages 829-837, W.W. Gerberich, N. Moody
FRACTURE OF STRUCTURAL ALLOYS AT TEMPERATURES APPROACHING ABSOLUTE ZERO, Pages 839-845, R.L. Tobler
FRACTURE AND TOUGHNESS OF BCC IRON ALLOYS AT CRYOGENIC TEMPERATURE, Pages 847-852, K. Ishikawa, K. Tsuya
A CRITERION FOR STRENGTH OF STRUCTURAL MATERIALS IN COMPLEX STRESS STATE AT LOW TEMPERATURES, Pages 853-856, G.S. Pisarenko, A.A. Lebedyev
FATIGUE FRACTURE TOUGHNESS AND FATIGUE CRACK PROPAGATION IN 5.5% Ni STEEL AT LOW TEMPERATURE, Pages 857-864, T. Kawasaki, T. Yokobori, Y. Sawaki, S. Nakanishi, H. Izumi
FRACTURE MECHANISMS IN Si-Al-O-N CERAMICS, Pages 867-874, M.H. Lewis, G. Smith
THE MEASUREMENT OF KIC AND SUBCRITICAL CRACK PROPAGATION RATES IN HOT PRESSED SiC AND Si3N4, Pages 875-882, J.L. Henshall, D.J. Rowcliffe, J.W. Edington
THE EVALUATION OF CRACK RESISTANCE AND CRACK VELOCITY FROM CONTROLLED FRACTURE EXPERIMENTS OF CERAMIC BEND SPECIMENS, Pages 883-891, F.W. Kleinlein, H. Hübner
DEPENDENCE OF LIFETIME PREDICTIONS ON THE FORM OF THE CRACK PROPAGATION EQUATION, Pages 893-901, S.M. Wiederhorn
ENGINEERING DESIGN AND FATIGUE FAILURE OF FUSED SILICA FIBRES, Pages 903-908, J.E. Ritter Jr.
GRAIN SIZE AND FRACTURE TOUGHNESS OF ALUMINA, Pages 909-912, P.L. Pratt
FAILURE PREDICTION OF FINITE FLAWED CERAMIC PLATES UNDER COMBINED STRESSES, Pages 913-919, E.M. Lenoe, D. Neal
BRITTLE FRACTURE AND SUBCRITICAL CRACK GROWTH IN A CERAMIC STRUCTURE, Pages 921-927, G.G. Trantina
ABOUT THE PROCESS ZONE SURROUNDING THE CRACK TIP IN CERAMICS, Pages 929-932, F.E. Buresch
FRACTURE MIRROR FORMATION IN SINGLE CRYSTAL ALUMINA, Pages 933-939, A.I.A. Abdel-Latif, R.E. Tressler, R.C. Bradt
CRACK SHAPE STUDY IN A BRITTLE, NON-BONDED, PARTICULATE COMPOSITE, Pages 941-948, D.J. Green, P.S. Nicholson, J.D. Embury
BRITTLE FRACTURE UNDER BIAXIAL NORMAL STRESS, Pages 949-957, M.C. Shaw, R. Komanduri
BRANCHING OF HERTZ CRACKS, Pages 959-964, H.P. Kirchner, R.M. Gruver
MEASUREMENT OF FAST CRACK PROPAGATION IN GLASS UNDER DYNAMIC LOADING, Pages 965-969, W. Döll, M.G. Schinker, G.W. Weidmann
THE PROPAGATION AND BIFURCATION OF CRACKS IN QUARTZ, Pages 971-978, A. Ball, B.W. Payne
ORIGINS OF ACOUSTIC EMISSION IN THE FRACTURE OF GLASS PLATES, Pages 979-984, J.S. Nadeau
SPONTANEOUS FRACTURE OF TEMPERED GLASS, Pages 985-992, C.C. Hsiao
STRESS CORROSION CHARACTERISTICS OF TOUGHENED GLASSES AND CERAMICS, Pages 993-999, J.T. Hagan, M.V. Swain, J.E. Field
EFFECT OF NOTCH ROOT RADIUS ON THE FRACTURE BEHAVIOUR OF MONOCRYSTALLINE SILICON, Pages 1001-1005, R.J. Myers, B.M. Hillberry
ON HYDROGEN INDUCED FRACTURE OF PORCELAIN ENAMEL LAYERS, Pages 1007-1014, Y. Ishikawa, M. Zen, O. Nishida
FRACTURE OF PARTICULATE COMPOSITES BASED ON POLYMETHYLMETHACRYLATE, Pages 1015-1023, P.W.R. Beaumont, V. Jolliffe, D. Gore
BOND FRACTURE STRENGTH IN CERAMIC-TO-METAL JOINTS, Pages 1025-1029, R. Pabst, G. Elssner
FRACTURE RESISTANCE OF ADHESIVELY-BONDED 7075-T6 ALUMINUM ALLOY LAMINATES, Pages 1031-1037, J.A. Alic
EFFECT OF INTERFACE ROUGHNESS ON CRACKING OF ANODIC OXIDE FILM ON ALUMINUM, Pages 1039-1045, K.K. Chawla, M. Metzger
THERMAL FRACTURE IN COMPOUND MATERIALS, Pages 1047-1054, K. Herrmann, A. Fleck
STRESS DISTRIBUTION IN A CRACKED BIMATERIAL PLATE, Pages 1055-1058, T.S. Cook, D.M. Tracey
STRENGTH CRITERIA FOR FIBRE-REINFORCED PLASTICS, Pages 1059-1065, Yu.N. Rabotnov, A.N. Polilov
THE EFFECT OF THE INTERFACE ON THE FRACTURE CHARACTERISTICS OF INVESTMENT CAST GRAPHITE FIBER REINFORCED Sn-Pb ALLOY, Pages 1067-1071, A. Miyase, K. Piekarski
AN ANALYTICAL R-CURVE EXPRESSION OF A BRITTLE MATRIX COMPOSITE CONTAINING DISCONTINUOUS FIBRES, Pages 1073-1078, J.C. Lenain
THE EFFECT OF PRESSURE AND ENVIRONMENT ON THE FRACTURE AND YIELD OF POLYMERS, Pages 1079-1086, S. Kapur, K. Matsushige, A. Galeski, E. Baer
STRESSES AROUND A POLYMER CRAZE, Pages 1087-1093, C.H. Liu, C.C. Hsiao
INFLUENCE OF THE CONFIGURATION OF CRAZES ON THE FRACTURE OF PMMA, Pages 1095-1098, J. Opfermann, G. Menges
THE EFFECT OF SURFACE FINISH ON THE STRENGTH AND CRAZE RESISTANCE OF POLYMETHYLMETHACRYLATE IN SOME FLUIDS, Pages 1099-1103, D. McCammond, M. Noga
CYCLIC DEFORMATION AND CRAZE GROWTH IN POLYCARBONATE, Pages 1105-1111, P. Beardmore, S. Rabinowitz
FRACTURE TOUGHNESS OF PMMA UNDER BIAXIAL STRESS, Pages 1113-1118, J.C. Radon, P.S. Leevers, L.E. Culver
MORPHOLOGICAL ASPECTS OF CRACK GROWTH IN CRYSTALLINE POLYPROPYLENE, Pages 1119-1126, K. Friedrich
THE EFFECT OF TEMPERATURE ON THE FREQUENCY SENSITIVITY OF FATIGUE CRACK PROPAGATION IN POLYMERS, Pages 1127-1133, M.D. Skibo, R.W. Hertzberg, J.A. Manson
ANISOTROPIC FRACTURE OF A HOT-STRETCHED ACRYLIC THERMOPLASTIC, Pages 1135-1143, Keith Williams
FRACTURE CRITERION FOR SOLID PROPELLANTS, Pages 1145-1151, B. Schaeffer
RESEARCH CRITERIA IN THE DEVELOPMENT OF BIOCOMPATIBLE IMPLANTS FOR PREVENTION OF FRACTURE, Pages 1153-1159, A. Engelhardt, H. Grell, H. Scharbach, D. Kooke
FAILURES OF ORTHOPEDIC FIXATION DEVICES, Pages 1161-1166, D.O. Cox, J. Pirs, C.N.J. Wagner
MECHANICAL FAILURE ON THE MICROSTRUCTURAL LEVEL IN HAVERSIAN BONE, Pages 1167-1172, P. Frasca, R.A. Harper, J.L. Katz
AN EMPIRICAL STRENGTH THEORY FOR COMPACT BONE, Pages 1173-1179, W.C. Hayes, T.M. Wright
TENSILE FRACTURE BEHAVIOUR OF VASCULAR SUBSTITUTES, Pages 1181-1191, A.T. Yokobori Jr, H. Ouchi, T. Yokobori, H. Sasaki
STRENGTH OF BRITTLE MATERIALS IN NONUNIFORM TRIAXIAL COMPRESSION, Pages 1193-1195, I.B. Sokolov, V.A. Logunova
CRACK PROPAGATION IN A TWO-PHASE MATERIAL SUCH AS CONCRETE, Pages 1197-1203, J.W. Zaitsev, F.H. Wittmann
EXISTENCE OF A CRITICAL STRAIN ENERGY RELEASE RATE FOR CONCRETE, Pages 1205-1209, J. Mazars
THE APPLICATION OF FRACTURE MECHANICS TO THE INVESTIGATION OF CRACKING IN MASSIVE CONCRETE CONSTRUCTION ELEMENTS OF DAMS, Pages 1211-1217, A.A. Khrapkov, L.P. Trapesnikov, G.S. Geinats, V.I. Pashchenko, A.P. Pak
CREEP FRACTURE OF CONCRETE IN PRESTRESSED CONCRETE MEMBERS DURING MANUFACTURE, Pages 1219-1222, Yu.V. Zaitsev, E.N. Ščerbakov
Author Index, Pages 1225-1232
SUBJECT INDEX, Pages 1233-1251
CITATION INDEX, Pages 1253-1289