Advances in Production Management Systems. Towards Smart and Digital Manufacturing: IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 – September 3, 2020, Proceedings, Part II

Front Matter ....Pages i-xxxi
Front Matter ....Pages 1-1
 Facilitating Operator Participation in Continuous Improvement: An Investigation of Organizational Factors  (Eirin Lodgaard, Silje Helene Aschehoug, Daryl Powell)....Pages 3-10
 Improving the Safety of Using Didactic Setups by Applying Augmented Reality  (Srdjan Tegeltija, Vule Reljić, Ivana àenk, Laslo Tarjan, Branislav Tejić)....Pages 11-18
 Production Management as-a-Service: A Softbot Approach  (Brunno Abner, Ricardo J. Rabelo, Saulo P. Zambiasi, David Romero)....Pages 19-30
 Knowledge Strategies for Organization 4.0 – A Workforce Centric Approach  (Magnus Bjerkne Gerdin, Åsa Fast-Berglund, Dan Li, Adam Palmquist)....Pages 31-36
 Challenges for the Operator 3.0 Addressed Through the Enabling Technologies of the Operator 4.0  (Malin Tarrar, Peter Thorvald, Åsa Fast-Berglund, David Romero)....Pages 37-45
 Agent- and Skill-Based Process Interoperability for Socio-Technical Production Systems-of-Systems  (Åsa Fast-Berglund, David Romero, Magnus Åkerman, Björn Hodig, Andreas Pichler)....Pages 46-54
Front Matter ....Pages 55-55
 Challenges in Data Life Cycle Management for Sustainable Cyber-Physical Production Systems  (Mélanie Despeisse, Ebru Turanoglu Bekar)....Pages 57-65
 Explainable AI in Manufacturing: A Predictive Maintenance Case Study  (Bahrudin Hrnjica, Selver Softic)....Pages 66-73
 Retrofit Concept for Textile Production  (Felix Franke, Susanne Franke, Ralph Riedel)....Pages 74-82
 Organizational Enablers for Digitalization in Norwegian Industry  (Lars Harald Lied, Maria Flavia Mogos, Daryl John Powell)....Pages 83-90
 Concept of PLM Application Integration with VR and AR Techniques  (Jan Duda, Sylwester Oleszek)....Pages 91-99
 The Big Potential of Big Data in Manufacturing: Evidence from Emerging Economies  (Marko Pavlović, Uglješa Marjanović, Slavko Rakić, Nemanja Tasić, Bojan Lalić)....Pages 100-107
 A Conceptual Model for Deploying Digitalization in SMEs Through Capability Building  (Zuhara Chavez, Jannicke Baalsrud Hauge, Monica Bellgran)....Pages 108-116
 The Potential of Game Development Platforms for Digital Twins and Virtual Labs  (Ali Abdallah, Matthias Primas, Ioan Turcin, Udo Traussnigg)....Pages 117-121
 The Application of ICT Solutions in Manufacturing Companies in Serbia  (Danijela Ciric, Teodora Lolic, Danijela Gracanin, Darko Stefanovic, Bojan Lalic)....Pages 122-129
 Achieving Business Model Innovation with the Personalized Product Business Model Radar Template  (Egon Lüftenegger)....Pages 130-137
 Integrating Electronic Components into 3D Printed Parts to Develop a Digital Manufacturing Approach  (Ioan Turcin, Ali Abdallah, Manfred Pauritsch, Cosmin Cosma, Nicolae Balc)....Pages 138-145
 Digital Transformation and Its Potential Effects on Future Management: Insights from an ETO Context  (Antoni Vike Danielsen)....Pages 146-153
 Applying Contextualization for Data-Driven Transformation in Manufacturing  (Sonika Gogineni, Kai Lindow, Jonas Nickel, Rainer Stark)....Pages 154-161
Front Matter ....Pages 163-163
 Smart Contract-Based Blockchain Solution to Reduce Supply Chain Risks  (Fabian Dietrich, Ali Turgut, Daniel Palm, Louis Louw)....Pages 165-173
 Towards Sustainability: The Manufacturers’ Perspective  (Olena Klymenko, Lise Lillebrygfjeld Halse, Bjørn Jæger)....Pages 174-181
Front Matter ....Pages 183-183
 Smart Factory Competitiveness Based on Real Time Monitoring and Quality Predictive Model Applied to Multi-stages Production Lines  (Nicola Gramegna, Fabrizio Greggio, Franco Bonollo)....Pages 185-196
 A New Application of Coordination Contracts for Supplier Selection in a Cloud Environment  (Reza Tavakkoli-Moghaddam, Mohammad Alipour-Vaezi, Zahra Mohammad-Nazari)....Pages 197-205
 Workforce Assignment with a Different Skill Level for Automotive Parts Assembly Lines  (Hyungjoon Yang, Je-Hun Lee, Hyun-Jung Kim)....Pages 206-212
 A Framework of Data-Driven Dynamic Optimisation for Smart Production Logistics  (Sichao Liu, Lihui Wang, Xi Vincent Wang, Magnus Wiktorsson)....Pages 213-221
 Decentralized Industrial IoT Data Management Based on Blockchain and IPFS  (Xiaochen Zheng, Jinzhi Lu, Shengjing Sun, Dimitris Kiritsis)....Pages 222-229
 Integrated Platform and Digital Twin Application for Global Automotive Part Suppliers  (Jinho Yang, Sangho Lee, Yong-Shin Kang, Sang Do Noh, Sung Soo Choi, Bo Ra Jung et al.)....Pages 230-237
 Analyzing the Characteristics of Digital Twin and Discrete Event Simulation in Cyber Physical Systems  (Erik Flores-García, Goo-Young Kim, Jinho Yang, Magnus Wiktorsson, Sang Do Noh)....Pages 238-244
 Streaming Analytics in Edge-Cloud Environment for Logistics Processes  (Moritz von Stietencron, Marco Lewandowski, Katerina Lepenioti, Alexandros Bousdekis, Karl Hribernik, Dimitris Apostolou et al.)....Pages 245-253
 An Improvement in Master Surgical Scheduling Using Artificial Neural Network and Fuzzy Programming Approach  (Ahmad Ghasemkhani, Reza Tavakkoli-Moghaddam, Mahdi Hamid, Mehdi Mahmoodjanloo)....Pages 254-262
 SKOS Tool: A Tool for Creating Knowledge Graphs to Support Semantic Text Classification  (Farhad Ameri, Reid Yoder, Kimia Zandbiglari)....Pages 263-271
Front Matter ....Pages 273-273
 The Successful Commercialization of a Digital Twin in an Industrial Product Service System  (Oliver Stoll, Shaun West, Paolo Gaiardelli, David Harrison, Fintan J. Corcoran)....Pages 275-282
 Using Service Dominant Logic to Assess the Value Co-creation of Smart Services  (Oliver Stoll, Shuan West, Cosimo Barbieri)....Pages 283-290
 Engineering of Data-Driven Service Systems for Smart Living: Application and Challenges  (Henrik Kortum, Laura Sophie Gravemeier, Novica Zarvic, Thomas Feld, Oliver Thomas)....Pages 291-298
 The Role of Service Business Models in the Manufacturing of Transition Economies  (Slavko Rakic, Nenad Simeunovic, Nenad Medic, Marko Pavlovic, Ugljesa Marjanovic)....Pages 299-306
 System Architecture Analysis with Network Index in MBSE Approach -Application to Smart Interactive Service with Digital Health Modeling-  (Toshiya Kaihara, Nobutada Fujii, Daisuke Kokuryo, Mizuki Harada)....Pages 307-313
 The Data-Driven Product-Service Systems Design and Delivery (4DPSS) Methodology  (Roberto Sala, Alessandro Bertoni, Fabiana Pirola, Giuditta Pezzotta)....Pages 314-321
 Data-Driven Maintenance Delivery Framework: Test in an Italian Company  (Roberto Sala, Fabiana Pirola, Giuditta Pezzotta)....Pages 322-329
 Towards a Comparative Data Value Assessment Framework for Smart Product Service Systems  (Lennard Holst, Volker Stich, Günther Schuh, Jana Frank)....Pages 330-337
 Impact of Platform Openness on Ecosystems and Value Streams in Platform-Based PSS Exemplified Using RAMI 4.0  (Michela Zambetti, Till Blüher, Giuditta Pezzotta, Konrad Exner, Roberto Pinto, Rainer Stark)....Pages 338-346
 Industry 4.0 Data-Related Technologies and Servitization: A Systematic Literature Review  (Michela Zambetti, Roberto Pinto, Giuditta Pezzotta)....Pages 347-360
 A Framework to Support Value Co-creation in PSS Development  (Martha Orellano, Xavier Boucher, Gilles Neubert, Anne Coulon)....Pages 361-368
Front Matter ....Pages 369-369
 Utilizing Lean Thinking as a Means to Digital Transformation in Service Organizations  (F. P. Santhiapillai, R. M. Chandima Ratnayake)....Pages 371-378
 On the Need of Functional Priority and Failure Risk Assessment to Optimize Human Resource Allocation in Public Service Organizations  (F. P. Santhiapillai, R. M. Chandima Ratnayake)....Pages 379-386
 Assessing the Value of Process Improvement Suggestions  (Torbjørn H. Netland, Hajime Mizuyama, Rafael Lorenz)....Pages 387-395
 On the Necessity for Identifying Waste in Knowledge Work Dominated Projects: A Case Study from Oil & Gas-Related Product Development Projects  (F. P. Santhiapillai, R. M. Chandima Ratnayake)....Pages 396-405
 Lean Thinking: From the Shop Floor to an Organizational Culture  (Paulo Amaro, Anabela C. Alves, Rui M. Sousa)....Pages 406-414
Front Matter ....Pages 415-415
 A Learning Roadmap for Digital Lean Manufacturing  (Anja Bottinga Solheim, Daryl John Powell)....Pages 417-424
 Investigating the Challenges and Opportunities for Production Planning and Control in Digital Lean Manufacturing  (Daryl Powell, Eirin Lodgaard, Heidi Dreyer)....Pages 425-431
 New Forms of Gemba Walks and Their Digital Tools in the Digital Lean Manufacturing World  (David Romero, Paolo Gaiardelli, Thorsten Wuest, Daryl Powell, Matthias Thürer)....Pages 432-440
Front Matter ....Pages 441-441
 A Computational Method for Identifying the Optimum Buffer Size in the Era of Zero Defect Manufacturing  (Foivos Psarommatis, Ali Boujemaoui, Dimitris Kiritsis)....Pages 443-450
 A Bi-objective Scheduling Model for Additive Manufacturing with Multiple Materials and Sequence-Dependent Setup Time  (Reza Tavakkoli-Moghaddam, Shadi Shirazian, Behdin Vahedi-Nouri)....Pages 451-459
 Dynamic Distributed Job-Shop Scheduling Problem Consisting of Reconfigurable Machine Tools  (Mehdi Mahmoodjanloo, Reza Tavakkoli-Moghaddam, Armand Baboli, Ali Bozorgi-Amiri)....Pages 460-468
 Towards a Non-disruptive System for Dynamic Orchestration of the Shop Floor  (Milan Pisarić, Vladimir Dimitrieski, Marko Vještica, Goran Krajoski)....Pages 469-476
 Assembly Process Design: Performance Evaluation Under Ergonomics Consideration Using Several Robot Collaboration Modes  (Anthony Quenehen, Stephane Thiery, Nathalie Klement, Lionel Roucoules, Olivier Gibaru)....Pages 477-484
 A Method of Distributed Production Management for Highly-Distributed Flexible Job Shops  (Daiki Yasuda, Eiji Morinaga, Hidefumi Wakamatsu)....Pages 485-492
 A Digital Twin Modular Framework for Reconfigurable Manufacturing Systems  (Hichem Haddou Benderbal, Abdelkrim R. Yelles-Chaouche, Alexandre Dolgui)....Pages 493-500
 Reconfigurable Digitalized and Servitized Production Systems: Requirements and Challenges  (Magdalena Paul, Audrey Cerqueus, Daniel Schneider, Hichem Haddou Benderbal, Xavier Boucher, Damien Lamy et al.)....Pages 501-508
 The Impact of Dynamic Tasks Assignment in Paced Mixed-Model Assembly Line with Moving Workers  (S. Ehsan Hashemi-Petroodi, Simon Thevenin, Sergey Kovalev, Alexandre Dolgui)....Pages 509-517
 Balancing and Configuration Planning of RMS to Minimize Energy Cost  (Audrey Cerqueus, Paolo Gianessi, Damien Lamy, Xavier Delorme)....Pages 518-526
Front Matter ....Pages 527-527
 Factors Affecting Shipyard Operations and Logistics: A Framework and Comparison of Shipbuilding Approaches  (Jo Wessel Strandhagen, Yongkuk Jeong, Jong Hun Woo, Marco Semini, Magnus Wiktorsson, Jan Ola Strandhagen et al.)....Pages 529-537
 Using the Smartphone as an Augmented Reality Device in ETO Industry  (Niklas Jahn, Axel Friedewald, Hermann Lödding)....Pages 538-546
 Exploring the Path Towards Construction 4.0: Collaborative Networks and Enterprise Architecture Views  (Ovidiu Noran, David Romero, Sorin Burchiu)....Pages 547-556
 The Potential for Purchasing Function to Enhance Circular Economy Business Models for ETO Production  (Deodat Mwesiumo, Nina Pereira Kvadsheim, Bella Belerivana Nujen)....Pages 557-564
 Planning Procurement Activities in ETO Projects  (Kristina Kjersem, Marte Giskeødegård)....Pages 565-572
 Maturity Model for Successful Cost Transformation in ETO Companies  (Johann Gregori, Ralph Riedel)....Pages 573-580
 Backlog Oriented Bottleneck Management – Practical Guide for Production Managers  (Roman Ungern-Sternberg, Christian Fries, Hans-Hermann Wiendahl)....Pages 581-589
 Cross-Functional Coordination Before and After the CODP: An Empirical Study in the Machinery Industry  (Margherita Pero, Violetta G. Cannas)....Pages 590-597
Front Matter ....Pages 599-599
 Short Agri-Food Supply Chains: A Proposal in a Food Bank  (Aguinaldo Eduardo de Souza, João Gilberto Mendes dos Reis, Antonio Carlos Estender, Jorge Luiz Dias Agia, Oduvaldo Vendrametto, Luciana Melo Costa et al.)....Pages 601-608
 Analysis of the New Frontier of Soybean Production in Brazil  (José Alberto de Alencar Luz, João Gilberto Mendes dos Reis, Alexandre Formigoni)....Pages 609-615
 Prediction of Cold Chain Transport Conditions Using Data Mining  (Clayton Gerber Mangini, Nilsa Duarte da Silva Lima, Irenilza de Alencar Nääs)....Pages 616-623
 Environmental Impact Classification of Perishable Cargo Transport Using Data Mining  (Manoel Eulálio Neto, Irenilza de Alencar Nääs, Nilsa Duarte da Silva Lima)....Pages 624-630
 Economic and Environmental Perfomance in Coffee Supply Chains: A Brazilian Case Study  (Paula Ferreira da Cruz Correia, João Gilberto Mendes dos Reis, Rodrigo Carlo Toloi, Fernanda Alves de Araújo, Silvia Helena Bonilla, Jonatas Santos de Souza et al.)....Pages 631-639
 Managing Perishable Multi-product Inventory with Supplier Fill-Rate, Price Reduction and Substitution  (Flemming Max Møller Christensen, Kenn Steger-Jensen, Iskra Dukovska-Popovska)....Pages 640-648
 Digital Technology Enablers for Resilient and Customer Driven Food Value Chains  (Christos Emmanouilidis, Serafim Bakalis)....Pages 649-657
Front Matter ....Pages 659-659
 Human–Robot Hybrid Service System Introduction for Enhancing Labor and Robot Productivity  (Takeshi Shimmura, Ryosuke Ichikari, Takashi Okuma)....Pages 661-669
 Forecasting Customers Visiting Using Machine Learning and Characteristics Analysis with Low Forecasting Accuracy Days  (Takashi Tanizaki, Yuta Hanayama, Takeshi Shimmura)....Pages 670-678
 A Study on Menu Planning Method for Managed Meal -Consideration of the Cost of Ordering Ingredients-  (Kyohei Irie, Nobutada Fujii, Daisuke Kokuryo, Toshiya Kaihara)....Pages 679-685
 Service System Design Considering Employee Satisfaction Through Introducing Service Robots  (Tomomi Nonaka, Takeshi Shimmura, Nobutada Fujii)....Pages 686-692
Front Matter ....Pages 693-693
 Exploring Synergies Between Circular Economy and Asset Management  (Federica Acerbi, Adalberto Polenghi, Irene Roda, Marco Macchi, Marco Taisch)....Pages 695-702
 Information Flows Supporting Circular Economy Adoption in the Manufacturing Sector  (Federica Acerbi, Marco Taisch)....Pages 703-710
 A Conceptual Model of the IT Ecosystem for Asset Management in the Global Manufacturing Context  (Adalberto Polenghi, Irene Roda, Marco Macchi, Alessandro Pozzetti)....Pages 711-719
Front Matter ....Pages 721-721
 Part Selection for Freeform Injection Molding: Framework for Development of a Unique Methodology  (Elham Sharifi, Atanu Chaudhuri, Brian Vejrum Wæhrens, Lasse G. Staal, Saeed D. Farahani)....Pages 723-730
 A Model for Cost-Benefit Analysis of Production Ramp-up Strategies  (Khaled Medini, Antoine Pierné, John Ahmet Erkoyuncu, Christian Cornet)....Pages 731-739
 Key Factors on Utilizing the Production System Design Phase for Increasing Operational Performance  (Md Hasibul Islam, Zuhara Chavez, Seyoum Eshetu Birkie, Monica Bellgran)....Pages 740-748
 Business Model Development for a Dynamic Production Network Platform  (Stefan Wiesner, Larissa Behrens, Jannicke Baalsrud Hauge)....Pages 749-757
 Changeable Closed-Loop Manufacturing Systems: A Case Study of Challenges in Product Take-Back  (Markus Thomas Bockholt, Ann-Louise Andersen, Thomas Ditlev Brunoe, Jesper Hemdrup Kristensen, Michele Colli, Peter Meulengracht Jensen et al.)....Pages 758-766
Back Matter ....Pages 767-772