Tribology for Energy Conservation, Proceedings of the 24th Leeds-Lyon Symposium on Tribology

Content: 
Introduction
Pages v-vii

A role for tribology in life cycle design Original Research Article
Pages 3-9
Roland Clift

Fuel economy improvement by engine and gear oils Original Research Article
Pages 13-24
Wilfried J. Bartz

Engine oil fuel efficiency — Practical issues Original Research Article
Pages 25-33
Stefan Korcek

Some challenges to tribology posed by energy efficient technology Original Research Article
Pages 35-47
HA Spikes

Nanorheology of poly isoprene solutions confined between two solid surfaces Original Research Article
Pages 51-62
J-M. Georges, S. Millot, A. Tonck, R.C. Coy, A.G. Schlijper, B.P. Williamson

Boundary conditions in fractionated lubrication Original Research Article
Pages 63-74
M.-H. Meurisse

Thermal degradation of greases and the effect on lubrication performance Original Research Article
Pages 75-83
S. Hurley, P.M. Cann, H.A. Spikes

Wear due to debris particles in rolling bearing contacts Original Research Article
Pages 87-93
R.W. Hamilton, R.S. Sayles, E. Ioannides

Wear behaviour of synchronisers in relation to a duty parameter Original Research Article
Pages 95-102
T. Lösche, E.-G. Paland, G. Poll

Preliminary study of the tribological performance of surface coatings under different slide-to-roll ratios and lubricated condition Original Research Article
Pages 103-113
C.W. Chan, Lawrence K.Y. Li, Jaffee H.W. Siu, George T.Y. Wan

Four great challenges confronting our understanding and modeling of sliding friction Original Research Article
Pages 117-128
Peter J. Blau

Observations of frictional behaviour of MoS2 and dependence on surface roughness orientation Original Research Article
Pages 129-137
I Lee-Prudhoe, MS Starkey, RS Sayles

Role of mechanical properties in the friction and transfer behavior of anisotropic PET base films Original Research Article
Pages 139-149
C. Blondet, M. Brendlé

Physical characterization of the antiwear performance of phosphate coatings.Application to engine tappets Original Research Article
Pages 151-160
G. Monteil, G. Meunier, C. Roques-Carmes

Developments of fretting sliding criteria to quantify the local friction coefficient evolution under partial slip condition Original Research Article
Pages 161-172
S. Fouvry, Ph. Kapsa, L. Vincent

Analysis of mixed lubrication of dynamically loaded journal bearings including non-Newtonian effects and mass conserving cavitation Original Research Article
Pages 175-186
Chao Zhang, zhiming zhang, Zugan Qiu

Spring-Supported thrust bearings for hydroelectric generators: Influence of oil viscosity on power loss Original Research Article
Pages 187-194
J.H. Ferguson, J.H. Yuan, J.B. Medley

Shock absorption by oil films applicable to bearing and seal parts of hydraulic equipment Original Research Article
Pages 195-204
Toshiharu Kazama, Atsushi Yamaguchi

Optimization of oil flow rate and oil film temperature rise in high speed hydrodynamic journal bearings Original Research Article
Pages 205-210
Hiromu Hashimoto

Tilting pad thrust bearing tests - influence of oil flow rate on power loss and temperatures Original Research Article
Pages 211-217
Willis W. Gardner

Elastohydrodynamic lubricant film shape - comparison between experimental and theoretical results Original Research Article
Pages 221-232
I. Křupka, M. Hartl, J. Čermák, M. Liška

The evolution of lubricant film defects in the starved regime Original Research Article
Pages 233-242
F. Chevalier, A.A. Lubrecht, P.M.E. Cann, G. Dalmaz

Starvation in ball bearing lubricated by oil and air lubrication system Original Research Article
Pages 243-252
F. Itoigawa, T. Nakamura, T. Matsubara

Starved elastohydrodynamic lubrication of the rib-roller end contact in tapered roller bearings: Film thickness, traction and moments Original Research Article
Pages 253-263
F. Colin, F. Chevalier, J.-P. Chaomleffel, J. de Mul, G. Dalmaz

Specifying surface roughness for spur and helical gears Original Research Article
Pages 267-274
W Scott, DJ Hargreaves

Experimental studies of dynamic sliding wear for PEHL contacts Original Research Article
Pages 275-280
W. Wang, P.L. Wong

“Bi-Gaussian” representation of worn surface topography in elastic contact problems Original Research Article
Pages 281-290
S.E. Leefe

Effects of surface topography and running-in upon rolling contact fatigue life -evaluation by plasticity index- Original Research Article
Pages 291-299
A. Nakajima, T. Mawatari

Effect of surface roughness on friction loss between cam and follower Original Research Article
Pages 301-308
T. Nakahara, M. Yamaji, K. Kyogoku

Energy conservation through surface engineering Original Research Article
Pages 311-318
PA Dearnley, H Weiss

Energy saving through extended component life Original Research Article
Pages 319-325
Mervin H. Jones

The impact on tribological issues of energy conservation in metal forming operations Original Research Article
Pages 327-333
J.H. Beynon

Modelling of friction in the simulation of metal machining Original Research Article
Pages 337-346
T.H.C. Childs, M.H. Dirikolu, K. Maekawa

Optimisation of wall friction in food processing Original Research Article
Pages 347-356
M.J. Adams, B.J. Briscoe, G. Corfield, C.J. Lawrence, X. Weert

Behaviour of diamond coatings on cutting tools Original Research Article
Pages 357-363
J. Rousseau, D. Paulmier, T. Mathia, T. Le Huu, H. Zaidi, F. Govin, J.F. Larose

The characterisation of die friction as a means to reduce component machining and attain near-net shape form Original Research Article
Pages 365-369
N. Özkan, B.J. Briscoe, I. Aydin

Tribologists and the “greening” of materials technology Original Research Article
Pages 373-378
J. Larsen-Basse

Analysis of the fretting behaviour of a glass/epoxy interface Original Research Article
Pages 379-387
M. Kharrat, A. Krichen, A. Chateauminois

Methodology of characterisation of the raceway/lubricant/ball contacts submitted to vibrations and degraded by false brinelling Original Research Article
Pages 389-398
C. Barthou, B. Vannes, D. Girodin, M. Pierantoni, E. Sauger

Influence of the nature and size of solid particles on the indentation features in EHL contacts Original Research Article
Pages 399-409
Fabrice Ville, Daniel Nelias

Relationship between acoustic emission source position and spalling position in radial rolling bearings Original Research Article
Pages 413-422
T. Yoshioka, H. Mano

Real-time condition monitoring of mechanical face seal Original Research Article
Pages 423-430
Min Zou, Itzhak Green

Wear debris analysis for condition monitoring of gears Original Research Article
Pages 431-442
J. Sugimura, M. Takesue, Y. Yamamoto

Condition based maintenance — the benefits of counting the cost Original Research Article
Pages 443-452
B.S. Rajan, B.J. Roylance

The effect of the viscosity-pressure behaviour of lubricants on the film thickness in elastohydrodynamically lubricated line contacts Original Research Article
Pages 455-464
D.J. Schipper, W.E. ten Napel

Elastohydrodynamic friction behavior of polyalphaolefin blends Original Research Article
Pages 465-475
A. LaFountain, G.J. Johnston, H.A. Spikes

Preliminary investigation of the influence of temperature on the limiting shear strength of lubricant films using a sliding wedge test Original Research Article
Pages 477-486
E.M. Kopalinsky, P.L.B. Oxley, C. Greenhill

A tribological study of roller follower valve trains. Part 1: A theoretical study with a numerical lubrication model considering possible sliding Original Research Article
Pages 489-499
F. Ji, C.M. Taylor

A sensitivity analysis of the influences of the design and operational parameters on frictional losses of ring packs in an internal combustion engine Original Research Article
Pages 501-514
Ming-Tang Ma

AES investigation of the transfer and chemical behaviour of MoS2 in rolling contacts Original Research Article
Pages 515-524
S. Debaud, S. Mischler, G. Gugler

Wet friction materials for continuous slip torque converter clutch — Fuel economy improvement of passenger cars equipped with automatic transmission — Original Research Article
Pages 527-533
Y. Kamada, N. Wang, T. Kotanigawa, J. Kawabata, M. Araki, K. Mukaida

The reduction of friction in axially non-cylindrical journal bearings using grooved bearing shells Original Research Article
Pages 535-541
Hassan E. Rasheed

Written discussion — Contributions
Pages 545-563

List of delegates
Pages 567-576