Technological Advancements in Construction: Selected Papers

Contents
Content of Radionuclides in Soils of the Voronezh Region
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Discussion
	5 Conclusion
	References
Shading System Design and Solar Gains Control for Buildings Passive Energy-Efficiency Improvement
	1 Introduction
	2 Materials and Methods
		2.1 Building Description
		2.2 Building Site Climatic Conditions
	3 Results and Discussion
		3.1 Block 1 South Facing Façade Shading Design
		3.2 Block 2 South-West Facing Façade Shading Design
		3.3 Tunnel South-West Facing Façade Shading Design
		3.4 Daylight Performance Verification
	4 Conclusion
	References
Features of Determining the Entrepreneur’ Profit in the Agricultural Land Cadastral Valuation Under Buildings and Structures
	1 Introduction
	2 Methods and Materials
	3 Results and Discussion
	4 Conclusion
	References
Forecasting of Thermal Regime in an Oil Mine
	1 Introduction
	2 Methods
	3 Discussion of Results
	4 Conclusion
	References
Influence of Forced Cooling Criteria on the Pressure Distribution Inside the Curved Ventilation Ducts of the Brake Disc
	1 Introduction
	2 Materials and Methods
	3 Conclusion
	References
Modeling the Clustering of Dispersed Systems Using Dynamic Models
	1 Introduction
	2 Research Methods and Principles
	3 The Main Results
	4 Discussion
	5 Conclusions
	References
Substantiation of the Method for Calculating Soil Deformation Modulus
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	References
Neural Network Model for Quality Indicators Assessment: Case of Paper Manufacturing Industry
	1 Introduction
	2 Generation of the Data
	3 Results
	4 Discussion and Conclusion
	References
Design of “Green” Roofs of Extensive Type in Various Climatic Zones of Russia
	1 Introduction
	2 Materials and Methods of Research
	3 Results and Discussion
	4 Conclusion
	References
Results of Measuring the Thermal Concrete Properties by the Impulse Method
	1 Introduction
	2 Theoretical Justification
	3 Description of Experimental Studies
	4 Conclusions
	References
The Development of Polymer Fire-Resistant Thermal Insulation Coating Filled with Anthropogenic Waste
	1 Introduction
	2 Materials and Research Methods
	3 Results and Discussion
	References
Seismic Vulnerability of Individual Housing: Case Study
	1 Introduction
	2 Main Part
	3 Conclusion
	References
Strength and Deformability of the Dome of the Mausoleum of Khoja Ahmed Yasawi
	1 Introduction
	2 Method and Subject of Research
		2.1 Geotechnical Conditions of the Construction Site
		2.2 Object of Study
	3 Results
		3.1 Inspection Results
		3.2 Analytical Assessment
	4 Discussion
	5 Conclusion
	References
Simulation Modeling Using Neural Networks to Control Complex Technical Systems
	1 Introduction
	2 Methods for Managing Complex Technical Systems
	3 Development of a Combined Neural Network Method and Models for Operational Control of Complex Technical Systems
	4 Conclusion
	References
Assessment of the Vulnerability of Architectural Monuments to Dangerous Natural Processes
	1 Introduction
	2 Materials and Methods
		2.1 Analysis of the Main Dangerous Natural Processes on the Territory of the Republic of Tatarstan
		2.2 Analysis of the Vulnerability of Architectural Monuments and Historical Territories of the Republic of Tatarstan to Dangerous Natural Processes
		2.3 Methods for Developing a Rational Solution Aimed at Increasing the Resistance of Architectural Monuments and Historical Territories to Dangerous Exogenous Processes
	3 Results
	4 Discussion
	5 Conclusions
	References
Complex Assessment the Construction Works Quality Using BIM Technologies
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Risk Identification and Assessment in the Design of Concrete Mixes
	1 Introduction
	2 Methods and Materials
	3 Results
	4 Discussion and Conclusion
	References
Anisotropic Characteristics of Single Jointed Rock Mass Under Uniaxial Compression
	1 Introduction
		1.1 Sample Design
		1.2 Test Scheme
	2 Analysis of Anisotropy of Stratified Rock Mass
		2.1 Characteristics of Stress–Strain Curve
		2.2 Peak Strength
		2.3 Failure Characteristic Analysis
	3 Analysis of Mechanical Effect of Joint Surface
	4 Conclusion
	References
Real Estate Public Management Quality Assessment
	1 Introduction
	2 Methodology and Methods
		2.1 REO Public Management Quality Indicators
		2.2 REO Public Management Quality Indicators
	3 Results
	4 Discussion
	5 Conclusion
	References
Tuning the PID Controller According to the Criterion of the Maximum Phase Margin
	1 Introduction
	2 Methods
	3 Statement and Solution of the Problem
	4 Calculation of the Controller Parameters for the Object of the Electric Generator Air Cooling System
	5 Conclusions
	References
Detailing the Impact Structure of the Participants of the Complex Transport Service
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Reproducibility of the Properties of Foamed Ceramics by the Processability Factor Method
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Optimized Chemical Composition of Concrete Used in Waterproof Objects
	1 Introduction
	2 Methods
	3 Results and Discussion
		3.1 Cement Content with Water/Cement Ratio = Const, OК ≠ Const
		3.2 Influence of Sand Content in Aggregate Mixes
	4 Conclusions
	References
Modelling of Ultrasonic Wave Propagation Through the Border of Two Mediums
	1 Introduction
	2 Methods
	3 Results and Discussion
	4 Conclusions
	References
Clustering Methods and Time Parameterization in the Management of Port Cargo Flows
	1 Introduction
		1.1 Literature Review
		1.2 Prospect for Further Research in the Field of Multimodal Freight Transportation Management
	2 Development of Clustering Methods and Time Parametrization in the Management of Cargo Flows of Port Transport Systems
		2.1 Updating Clustering Methods in Multimodal Cargo Flow Management
	3 Time Parameterization Method in Multimodal Cargo Flow Management
	4 Results
	References
High Speed Transport Systems for Urban Agglomerations
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion and Conclusions
	References
On Some Properties of the Blow-Up Solutions of a Nonlinear Parabolic System Non-divergent Form with Cross-Diffusion
	1 Introduction
	2 Preliminaries
	3 Approximate Self-similarity for the Nonlinear System of Equations
		3.1 The Case of Fast Diffusion
		3.2 The Case of Slow Diffusion
	4 Main Results
	5 Computational Experiment
		5.1 The Case of Slow Diffusion  2 pi >0,( i = 1,2 )
		5.2 The Case of Fast Diffusion  pi <0,( i = 1,2 )
	6 Conclusions
	References
Block Matrix for Three-Factor Analysis of Machinery Failures
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Conclusion
	References
Research on Load-Bearing Constructions Behavior During Pit Excavation Under «Slurry Wall» Protection
	1 Introduction
	2 Model Description
	3 Calculation Results
	4 Conclusion
	References
Assessment of Stress-Deformed State of Armocement Two-Layer Elements
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Estimation Residual Resource of Unreinforced Stone Structures by Changing the Parameters Masonry
	1 Introduction
	2 Methods
	3 Results and Discussion
		3.1 Calculation of Centrally Compressed Members
		3.2 Calculation of Eccentrically Compressed Members
		3.3 Oblique Eccentric Compression
		3.4 Crushing (Local Compression)
		3.5 Bending Elements
		3.6 Centrally Stretched Elements
		3.7 Shear
	4 Conclusions
	References
Importance of Solar in Aeration of High-Rise Buildings in Cities of Southern Countries with Hot Climatic Condition
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	5 Conclusions
	6 Recommendations
	References
Effectiveness of the Use of Instrumental Measuring Tools for Cadastral Surveying
	1 Introduction
	2 Materials and Methods
	3 Analysis of the Use of Tacheometers in Cadastral Surveying
	4 Results and Discussion
	5 Conclusions
	References
Tensoresistor-Based Microfluidics and Telemetric Strain-Gauge Lens-Less Detectors as Specialized Labs-on-a-Chip for Soil Mechanics and Foundation Monitoring
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	References
An Approach to Assessing Construction Enterprise Intellectual Capital in the Digital Age
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Automatic Defect Recognition in Glass Rod Production Using Machine Vision and Deep Learning
	1 Introduction
	2 Methods of Forming Descriptors
	3 Recognition of Glass Rod Defects Using Deep Belief Neural Networks
	4 Results
	5 Conclusions
	References
Automation of Cargo Correspondences in Railway-Water Communication
	1 Introduction
	2 Material and Methods
	3 Results
	4 Conclusions
	References
Solving Differential Equations by Means of Mathematical Simulation in Simulink App of Matlab Software Package
	1 Introduction
	2 Overview of Theory
	3 Materials and Methods
	4 Research Results
	5 Discussion
	6 Conclusion
	References
Information and Intelligent Models in the Management of Transport and Logistics Systems
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusion
	References
A Review of the Earthquake Caused Damage on Reinforced Concrete and Masonry Buildings in Turkey
	1 Introduction
	2 Characteristics of the Earthquakes
	3 Damages Caused by Earthqukes
	4 Conclusion
	References
Identification of Defective Supports by Visual and Instrument Aids in the Operating Environment of a Railway Power Supply Division
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Concrete Hydraulic Curing Under Different Moisture Conditions
	1 Introduction
	2 Normal Conditions
	3 Hydraulic Setting
	4 Methods
	5 Results and Discussion
	6 Conclusions
	References
Parametric Model of Cement Soil
	1 Introduction
	2 Materials and Methods
	3 Results and Conclusions
	References
Construction of Diagnostic Algorithms for Complex Systems
	1 Introduction
	2 Methods and Tools for Diagnostics of Complex Systems
	3 Mathematical Model
	4 Investigation of System Defects
	5 Conclusions
	References
Determination of the Convergence of the Behavior of a Full-Scale Model of a Tower Crane with a Real Object
	1 Introduction
	2 Materials and Equipment
	3 Analysis of Simulation Results and Experimental Data
	4 Conclusion
	References
Modeling of Parameters of Laser Surfacing Zones and Determination of Tribotechnical Properties of Coatings Obtained by Laser Additive Technologies
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusion
	References
Determination of Tribotechnical Characteristics of Modified Aluminum Alloys
	1 Introduction
	2 Materials and Methods of Research
	3 Results
	4 Conclusions
	References
Obtaining a Coating with Increased Adhesive and Cohesive Strength for High-Speed Flame Spraying for a Pair of Materials Coating-Substrate Metal–Metal
	1 Introduction
	2 Materials and Equipment
	3 Analysis of Simulation Results and Experimental Data
	4 Conclusion
	References
Study of the Compressive Strength of Concrete with Polypropylene Microfiber
	1 Introduction
	2 Methods
	3 Results and Discussion
		3.1 Test No 1
		3.2 Test No 2
	4 Conclusions
	References
Methodology for Assessing the Response Parameters of Multi-storey Buildings with Non-linear Dynamic Vibration Dampers in Case of Seismic Impacts
	1 Introduction
	2 Patterns and Calculation Methods
	3 Methodology for Computational and Theoretical Studies
	4 Performance Criteria for the Use of DVD for a Discrete Model
	5 Calculation Agenda
	6 Results and Conclusions
	References
Author Index