Supercollider 4

Front Matter....Pages i-xxvi
Opening Remarks, International Industrial Symposium on the Superconducting Super Collider....Pages 1-4
An Assessment of the SSC Impact on the Training and Employment Needs of North Central Texas....Pages 5-12
Building Blocks of the Universe....Pages 13-20
SSC Education: Science to Capture the Imagination....Pages 21-24
Summary of the Performance of Superconducting Cable Produced for the Accelerator System String Test Program....Pages 25-32
Development of NbTi Superconductor for the SSC by Sumitomo Electric Industries....Pages 33-39
A Novel Approach to Make Fine Filament Superconductors....Pages 41-47
Recent Results in Developing NbTi Fine Filament Superconductors....Pages 49-56
Recent Results in Manufacturing Niobium Titanium Superconductor for the SSC Project....Pages 57-67
GIS/FIS Development for the SSC....Pages 69-77
Successful NEPA Compliance at the Superconducting Super Collider Laboratory: A Case Study....Pages 79-83
Archaeology of the Superconducting Super Collider....Pages 85-92
Protection of Prehistoric and Historic Properties at the Superconducting Super Collider....Pages 93-98
Use of Pesticides at the SSC: Approval, Reporting, and Monitoring Requirements....Pages 99-105
Medical Surveillance of Employee Health at the Superconducting Super Collider Laboratory....Pages 107-111
Review of SSC Dipole Magnet Mechanics and Quench Performance....Pages 113-136
A Summary of SSC Dipole Magnet Field Quality Measurements....Pages 137-149
The Engineering Development of an Actively Controlled Precise MUON Chamber for the SDC Detector....Pages 151-158
Mechanical Considerations for a SDC Central Straw Tracker for the SSCL....Pages 159-166
An Engineering Design Study of Detector Deformation Limits in the SSC SDC-Detector....Pages 167-174
The Prototyping and Evaluation of Remote Alignment Monitoring Schemes for SDC Muon System Supermodules....Pages 175-181
Mechanical Design and Finite Element Analysis of the SDC Central Calorimeter....Pages 183-190
Design and Construction of the SSCL Magnet Test Laboratory Cryogenic Systems....Pages 191-198
Commissioning and Acceptance Tests of the High Efficient 6kW Helium Refrigerator for the LEP 200 Project at CERN....Pages 199-206
84 K Nitrogen System for the SSC....Pages 207-217
Materials and Processes Selection for SSC Collider Dipole Magnets....Pages 219-224
Utilization of Gamma Ray Inspection System for Tomographic Imaging and Dimensional Analysis of Complete Model Magnet Cold Masses and Collared Coil Sections....Pages 225-233
Thermal Performance of Various Multilayer Insulation Systems Below 80K....Pages 235-242
A Proposed IR Quad for the SSC....Pages 243-250
Magnetic Field Measurements of Fermilab/General Dynamics Built Full Scale SSC Collider Dipole Magnets....Pages 251-258
SSC Collider Quadrupole Cold Mass Design and Development....Pages 259-266
The Effect of Vacuum Gas Pressures and Species on Internal Heat Leak in the SSCL Magnet Design....Pages 267-274
Sextupole Corrector Coil Manufacture Using the Direct Wire Fabrication Process....Pages 275-279
Support System Design Options for Accommodating Cqm Cold Mass Thermal Contraction....Pages 281-288
Design and Construction Experience with Collet end Clamps for 50 mm Aperture SSC Collider Dipoles....Pages 289-296
A Cryogenic Support Post for SSC Quadrupole Magnets....Pages 297-303
Transient Thermal and Stress Analysis of a CQM Cold Mass....Pages 305-312
Structural Dynamic Analysis of the SSC 40 mm Collider Dipole Magnet Under Transportation Loads....Pages 313-320
Analytical Study of the Thermal Insulation System in the Interconnect Region of the SSC Collider Magnets....Pages 321-325
High-Accuracy, Two-Dimensional Magnetic Field Multipole Calculations for Accelerator Magnets....Pages 327-334
Magnetic Optimization of the HEB Dipole Magnet end Section....Pages 335-342
Transient Cooldown Stresses in Superconducting Collider Dipole Magnet....Pages 343-350
Stress Relaxation in SSC 50mm Dipole Coils....Pages 351-357
Theoretical Methods for Creep and Stress Relaxation Studies of SSC Coil....Pages 359-364
Quench Performance of Fermilab/General Dynamics Built Full Length SSC Collider Dipole Magnets....Pages 365-372
SSC Dipole Magnet Manufacturing Facility Implementation....Pages 373-380
Electrodeposition of Copper on the Internal Walls of Colliders in Beam Tubes....Pages 381-389
Pressure Relief Radial Passages for SSC....Pages 391-394
Overview of a Robotic System for Azimuthal Dimensions of SSC Dipole Coils....Pages 395-402
Overview and Statistical Failure Analyses of the Electrical Insulation System for the SSC Long Dipole Magnets from an Industrialization Point of View....Pages 403-409
A Precise Technique for Manufacturing Correction Coil....Pages 411-417
A Design for a High Voltage Magnet Coil Ringer Test Set....Pages 419-425
Evolution of the CDM Design....Pages 427-433
Mechanical Behavior of Fermilab/General Dynamics Built 15M SSC Collider Dipoles....Pages 435-442
Quench Performance of Six Similar 17 m-Long, 40 mm-Aperture SSC Model Dipoles....Pages 443-449
Quench Plateau, Coil Cure Temperature, and Copper-to-Superconductor Ratio in Recent 1.8 m SSC Model Dipoles....Pages 451-452
Conceptual Design of the SSC Cryogenic Transfer Lines....Pages 453-460
Automating the Strain Gauge Data Acquisition of Dipole Magnets During Keying and Skinning....Pages 461-466
Magnetic Measurement Instrumentation Developments at the SSC....Pages 467-474
Design and Use of a Mechanical Gage for Measuring Alignment of Critical Features of String Test Magnets....Pages 475-481
Performance of the Magcool-Subcooler Cryogenic System After 50 mm SSC Dipole Quenches....Pages 483-490
A Statistical Rationale for Establishing Process Quality Control Limits Using Fixed Sample Size, for Critical Current Verification of SSC Superconducting Wire....Pages 491-498
Quality System Design and Development for SSC Superconductor Cable....Pages 499-504
Alternative Alignment Applications for the Collider Dipole Magnet: Capability Indices....Pages 505-512
Application of a B&W Developed Computer Aided Pictorial Process Planning System to CQMS for Manufacturing Process Control....Pages 513-516
Construction Experience with Fermilab-Built Full-Length 50mm SSC Dipoles....Pages 517-526
Results from the Fermilab 1.5 M Model Magnet Program....Pages 527-534
Construction and Test Results from 15 m-Long, 50 mm Aperture SSC Collider Dipole Models....Pages 535-549
Results from a Partial Lifetime Test of a 40-mm-Aperture, 17-m-Long SSC Model Dipole....Pages 551-558
Construction and Test Results from 1.8 M-Long, 50 Mm Aperture SSC Model Collider Dipoles....Pages 559-573
Two-Dimensional Magnetic Analysis of the SDC Muon Toroid....Pages 575-582
A New Concept of Multiplexed Optical Transmission Readout Scheme for a Silicon Strip Detector....Pages 583-590
The Design of the Cerenkov Counter for the SDC Detector....Pages 591-602
Silicon-Based Tracking System: Mechanical Engineering and Design....Pages 603-610
The Solenoidal Detector Collaboration Silicon Detector System....Pages 611-618
Effects of Mounting Methods on Temperature Sensor Accuracy Below 10K....Pages 619-626
High Efficiency, High Reliability, Improved Oil Injected Helium Screw Compressor....Pages 627-634
Thermal Optimization of the Helium-Cooled Power Leads for the SSC....Pages 635-642
Development of an Ultra Low Heat Leak Cryogenic Valve for the SSC Tunnel Spool Pieces....Pages 643-649
Conceptual Design of a Superconducting Mhd Propulsion System....Pages 651-659
Raw Materials and Early Monofilament Analysis from the Vendor Qualification Program....Pages 661-668
Cable Keystone Angle Optimization for 40-Mm SSC Quadrupole Magnet Development....Pages 669-676
Eddy Current Inspection of Superconducting Cable During Manufacturing....Pages 677-684
Cold Weld Analysis in SSC Strand and Cable....Pages 685-693
Results of AC Loss Measurements on SSC Conductors....Pages 695-701
Temperature Dependence of the Critical Current Density in SSC-Type Superconducting Wires....Pages 703-709
SSCL Quality Program Overview....Pages 711-715
SSCL Magnet Systems Quality Program Implementation for Laboratory and Industry....Pages 717-722
Total Quality: a Proven Approach for Magnet Manufacture....Pages 723-729
DC Dielectric Breakdown Tests of Liquid Helium at Temperatures 1.8K to 4.2K....Pages 731-738
Testing and Performance of High Temperature Superconducting Current Leads....Pages 739-746
SSC 50 mm Collider Dipole Cryostat Single Tube Support Post Conceptual Design and Analysis....Pages 747-755
Welding Vision System for SSC 50mm Yoke-Skinning Production....Pages 757-763
Axial Variations in the Magnetic Field of Superconducting Dipoles....Pages 765-772
Correcting Field Harmonics After Design in Superconducting Magnets....Pages 773-780
Barium Fluoride Crystal Calorimeter for GEM....Pages 781-800
Radiation Damage in Large Barium Fluoride Crystals....Pages 801-808
Radiation Damage of Rare Earth Ions Doped Barium Fluoride Crystals....Pages 809-815
Improved Process for Manufacture of Radiation Hard N-Channel JFETs for Detector Electronics....Pages 817-824
Overview of SSC Accelerator Requirements....Pages 825-831
The SSC Linac: Status of Design and Procurement Activities....Pages 833-839
An Updated Overview of the LEB RF System....Pages 841-847
Engineering Design Considerations for the Energy Storage Inductors Used in the LEB Power Supply....Pages 849-857
Measured Control Characteristics of the Half-Cell 40mm Aperture Magnet String....Pages 859-866
The Protection System for the Superconducting Electromagnet Ring of the UNK....Pages 867-872
The Magnet Database System....Pages 873-880
The Quench Detector on Magnetic Modulator for the UNK Quench Protection System....Pages 881-887
Requirements Control System Applied to Collider Dipole Magnet Development....Pages 889-896
A Dynamic Model for Beam Tube Vacuum Effects on the SSC Cryogenic System....Pages 897-904
A Facility Description of the SSCL Magnet Test Laboratory....Pages 905-911
Transportation Studies: 40-mm Collider Dipole Magnets....Pages 913-921
Experiments to Improve Materials for SSC Magnets....Pages 923-930
Subsidence of the Pit Slab at SLC Experimental Hall....Pages 931-938
Development of Fine Filament Superconducting Wires and Cables for Accelerators....Pages 939-942
Development of High Strength Aluminum-Stabilized Superconductor for the SDC Detector....Pages 943-955
Connectivity Among Computer-Aided Engineering Methods, Procedures, and Tools Used in Developing the SSC Collider Magnets....Pages 957-966
Control and Data Acquisition System for the B&W Vertical Dewar Facility....Pages 967-973
Current Oscillations in Superconducting Windings....Pages 975-980
Evaluation of Technology Transfer on Collider Quadrupole Manufacture at LBL....Pages 981-984
Interim Report on Technology Transfer on Collider Quadrupole Manufacture at LBL and SSCL....Pages 985-991
A Circuit Theory Approach to Quantifying Thermal Performance of Cryostat Designs for SSC Dipole Magnets....Pages 993-1000
A Method of Predicting the Reliability of CDM Coil Insulation....Pages 1001-1005
Software Design Philosophy for the SSCL Magnet Test Laboratory....Pages 1007-1014
System Design Overview for the Magnet Test Database System....Pages 1015-1020
Investigation of Azimuthal Stresses Due to Welding and Cooldown....Pages 1021-1024
Design of a Sensitive Calorimeter for Use in AC Loss Measurements....Pages 1025-1029
Temperature Dependence of the Viscoelastic Properties of SSC Coil Insulation (Kapton)....Pages 1031-1037
Measurement of the Elastic Modulus of Kapton Perpendicular to the Plane of the Film at Room and Cryogenic Temperatures....Pages 1039-1045
An Overview of Recent Progress Using Low-Cost and Cost-Effective Composite Materials and Processes to Produce SSC Magnet Coils and Associated Non-Metallic Parts....Pages 1047-1053
Production, Metallurgy, and Utilization of High Manganese Nonmagnetic Steel—Its Development for the SSC Magnet....Pages 1055-1064
Manufacturing and Magnetic Characteristics of High Purity Ultra Low Carbon Magnet Steel for the SSC....Pages 1065-1074
Dipole Magnet Shuttle System....Pages 1075-1080
Current Development of the Superconducting Wires and Cables for SSC in Hitachi Cable, Ltd.....Pages 1081-1087
The Cryogenic System for the MTL Magnet Test Stands....Pages 1089-1096
A Version of the Radiation-Resistant Fast Calorimeter....Pages 1097-1101
High Resolution Method of the Magnetic Axis Localization for Multipole Magnets on the Base of the Garnet Films Technology....Pages 1103-1109
Concept Design of the High-Voltage Transmission System for the Collider Tunnel....Pages 1111-1117
SDC Detector Foundation Requirements....Pages 1119-1125
Engineering the SSC Underground....Pages 1127-1135
Systems Engineering at the Superconducting Super Collider....Pages 1137-1142
Implementing Corrective Actions from the Failure Reporting, Analysis and Corrective Action System (FRACAS) to Achieve Magnet Reliability and Availability Goals....Pages 1143-1148
Risk Management as Applied to Collider Dipole Magnet Development....Pages 1149-1158
Summary of Production Development, Details, and Results for Model Dipoles at SSCL....Pages 1159-1166
Status of the Magnetic Design of the SSC Dipole Magnets....Pages 1167-1176
Alternate Manufacturing Processes and Materials for the SSC Dipole Magnet Coil End Parts....Pages 1177-1185
Manufacturing Concepts for the Collider Quadrupole Collared Coils....Pages 1187-1192
Neural Networks as First Level Triggers in Scintillating Fiber Detectors....Pages 1193-1199
Performance of a Prototype High Pressure Gas Sampling Calorimeter....Pages 1201-1207
Simulated Performance of a Hybrid Tracking System for the SDC Detector at the SSC....Pages 1209-1215
A Novel Photomultiplier Tube for Calorimetry at the SSC....Pages 1217-1224
Back Matter....Pages 1225-1249