Recent Trends in Mechanical Engineering : Select Proceedings of ICIME 2020

Front Matter ....Pages i-xii
 Analysis of Hybrid Green Fuel Blended with Diesel as Fuel for Conventional Engine  (N. S. Senthur, S. Shafquath ibn sulthan, H. Ram Ganesh, K. Arun)....Pages 1-12
 Experimental Investigation of Direct Evaporative Cooler with Sisal, Hemp, and Abaca Cooling Pad Material  (Manojkumar Udgire)....Pages 13-24
 Mitigation of Carbon Dioxide Gas from a DI Diesel Engine Fuelled with Honge Biodiesel for Agriculture  (K. Muralidharan, K. Senthil Kumar, K. Shanmugavel, S. Lakshmana Kumar, S. Rajkumar)....Pages 25-36
 Reduction of Greenhouse Gases from a Coated Diesel Engine Fuelled with Honge Biodiesel for Sustainable Environment  (K. Muralidharan, V. L. Raja, S. Lakshmana Kumar, K. Shanmugavel, R. Dhanasekaran)....Pages 37-46
 Thermal Barrier Coating on IC Engines; A Review  (Anoop. R. Chattarki, K. G. Basavakumar)....Pages 47-68
 Modeling and Analysis of Compression Ignition Engine Performance and Emissions of Biodiesel  (V. Nageswar Reddy, G. Sreenivasarao, K. Thirupati Reddy)....Pages 69-78
 Simulation of Performance of Boiler System for a Bagasse Unit Using LabVIEW  (Mahesh G. Emmi, Aravindrao M. Yadwad, Vinay V. Kuppast, B. S. Talikoti, M. Sampanna)....Pages 79-83
 Experimental Investigation of Performance, Emission and Combustion Characteristics of a Di-diesel Engine Fuelled with Aqueous Cerium Oxide and Aqueous Aluminium Oxide Nanoparticle Additives  (P. Ravichandra Ganesh, K. Hemachandra Reddy, J. M. Babu, M. Sarath Chandra)....Pages 85-96
 Emission Characteristics of CSOME in CRDI Diesel Engine with Multiple Injection Strategy  (Ramesh Babu Nallamothu, Anantha Kamal Nallamothu, Seshu Kishan Nallamothu)....Pages 97-108
 Impact of Process Parameters on Peak Temperature Inside the Workpiece During Friction Stir Welding of AA5083 Aluminum Alloys  (M. Shiva Chander, M. Ramakrishna, B. Durgaprasad)....Pages 109-119
 Optimization of Friction Welding Process Parameters for Weldment of Aluminium–Copper Electrical Connector  (Balkeshwar Singh, Worku Mamuye, Moera Gutu Jiru)....Pages 121-138
 A Study on Effect of Cutting Fluids on Surface Roughness of EN 8 Steel Turning Using Taguchi Method  (V. Kumar, P. Surendernath, K. Amarnath)....Pages 139-149
 Study on Mechanical Behavior of Friction Stir Welded Nylon-6 Sheets  (Santosh K. Sahu, Kamal Pal, Susmita Das, Avisek Tripathy)....Pages 151-160
 Optimization and Characterization Study on Deposition of Aluminium 6063 Over IS 2062 Low Carbon Steel by Friction Surfacing  (Dillip Kumar Sahoo, Bhulok Sundar Mohanty, A. Jaswanth, D. Abhinay Varma)....Pages 161-175
 Determination of Bending Force and Bend Angle of Sheet Metal Welds  (R. Uday Kumar)....Pages 177-183
 A Novel Approach for Reducing Delamination During Drilling of CFRP by Response Surface Methodology (RSM) Integrated with the Taguchi Method  (Tarakeswar Barik, Sourav Kumar Jena, Avisek Tripathy, Kamal Pal, Suchismita Parida)....Pages 185-197
 Application of MCDM Methods for Process Parameter Optimization in Turning Process—A Review  (Ch. Divya, L. Suvarna Raju, B. Singaravel)....Pages 199-207
 Effect of Hybridization, Influence of Surface Modification on the Properties and Optimization of bio fiber Composites  (G. Venkatesha Prasanna, M. Nikhil, A. Sai Kiran)....Pages 209-218
 Review on Processing and Characterization of Duplex Stainless Steels  (Rayappa Shrinivas Mahale, V. Shamanth, P. C. Sharath)....Pages 219-229
 Prediction of Wear Characteristics of Polymer Composites by ANN Modified by GA  (V. L. Raja, K. Muralidharan, R. Dhanasekaran)....Pages 231-237
 Experimental Investigation of Mohair Fibrous Composite Material on Mechanical Properties  (K. Amarnath, R. Venumadhav, E. Sreedhar)....Pages 239-246
 FE Analysis of Superplastic Forming Complex Shapes in Aluminum-Coated Magnesium Alloys  (J. Kandasamy)....Pages 247-259
 Failure Analysis of GFRP Composite Reinforced with Semimetals for Marine Applications  (Pala Srinivasa Reddy, Inkulu Anil Kumar, Satuluri Srikiran, Dannana Suresh)....Pages 261-280
 Mechanical Behavior in Tungsten Carbide-Reinforced Aluminum Composites  (Yamuzala Sai Ratnakar, Allu Venkata Pradeep)....Pages 281-294
 Simulation of Bridge Deck Made-Up of Fibre Reinforced Polymer Composites Reinforced with ZrO2  (I. Anil Kumar, P. Srinivasa Reddy, M. Balajee, R. Jagadeesh Kumar)....Pages 295-309
 Friction and Wear Characteristics of Austenitic Stainless Steel Against Ceramic Disc  (V. Sumalatha, P. Ravinder Reddy, A. Krishnaiah, G. S. Reddy)....Pages 311-320
 Fiber Surface Treatment and Quantity, Impact on the Performance of Biocomposites  (Gowdagiri Venkatesha Prasanna, A. Nikhil Nihar, G. Lokesh, N. Naga Sai)....Pages 321-331
 Compressive and Impact Behavior of Nanoscale Hybrid Composite Materials  (Mohd. Minhajuddin Saif, Dasari V. Ravi Shankar, Mohd. Manzoor Husain)....Pages 333-340
 Study of Mechanical Properties of Coconut Coir Fiber-Reinforced Polymer Composites  (Gondi Konda Reddy, H. Madhusudhana Reddy)....Pages 341-351
 Processing and Characterization of 6061 Aluminium Alloy with Nickel (Ni) and Zirconium (Zr)  (S. Arun Kumar, R. Raman Goud)....Pages 353-361
 Static Structural Analysis of Hybrid Honeycomb Structures Using FEA  (A. Chandrashekhar, Himam Saheb Shaik, S. Ranjan Mishra, Tushar Srivastava, M. L. Pavan Kishore)....Pages 363-375
 Design and Random Vibrational Analysis of Horizontal Impact Hammer Crusher  (S. Naveen, P. Praveen Kumar Reddy, S. L. N. Reddy)....Pages 377-385
 Fault Diagnosis of Unbalanced Multirotor System  (V. Hariharan, G. Rajeshkumar, K. A. Ibrahim Sheriff)....Pages 387-396
 Robust Design of Deterministically Synthesized Four-Bar Mechanism  (Sanjay Matekar, Ajay Fulambarkar)....Pages 397-405
 Analysis of Various Cooling Mechanisms for Plastic Gears Using Decision Tree Algorithms  (Sam Cherian, Abu Bakr Azam, Lokavarapu Bhaskara Rao)....Pages 407-418
 Design and Analysis of Sedan Car B-Pillar Outer Panel Using Abirbara with S-Glass Fiber Hybrid Composites  (Ramesh Babu Nallamothu, Melkamu Yigrem Yihunie)....Pages 419-432
 Design and Analysis of Shock Absorber  (N. Ankitha, M. R. S. Rupa Sri)....Pages 433-444
 Design and Optimization of a Two-Stage Gearbox Using GearTrax  (Kalyan Sekhar, Pradyumna Dharmadhikari, Shreyash Panchal, Lokavarapu Bhaskara Rao)....Pages 445-477
 Analysis of Composite Leaf Springs Using Finite Element Method  (S. Geetha Satya Sai, Venigalla Sailesh, S. K. Mobin, T. Subash Chandra Bose, Y. Sai Krishna, P. Phani Prasanthi)....Pages 479-488
 Design of Gears Using Aluminium 6061-T6 Alloy for Formula SAE Steering System  (Arnav Gupta, V. P. Yashvanth, Lokavarapu Bhaskara Rao)....Pages 489-505
 Design and Analysis of Helical Teeth Harmonic Drive  (Sekar Anand, Arunachalam Dharmalingam Srikeshav, Baskar Sharran, Lokavarapu Bhaskara Rao)....Pages 507-519
 Design and Analysis of Permanent Magnetic Gears  (Kolape Poonam Gujaba, Sharmila Parashar, Lokavarapu Bhaskara Rao)....Pages 521-530
 Design and Analysis of Swing Arm Using Carbon Fiber Composite by Using Creo 2.0 and ANSYS  (Pidaparthy Maheshbabu, R. Ramkumar, Dasari Ajay)....Pages 531-544
 Comparison of Kinematic Analysis of Robot Made of Conventional Theo Jansen Mechanism, Modified Theo Jansen Mechanism of PLA and Modified Theo Jansen Mechanism of Mild Steel  (Keval Bhavsar, Pranav Darji, Dharmik Gohel, Jitendra Modi, Umang Parmar)....Pages 545-559
 Modeling of a Warfield Autonomous Robot with GPS and Digital Compass  (P. V. Prasad Reddy, S. Madhava Reddy, D. L. Tejaswini)....Pages 561-574
 Analysis of Enterprise Model Using System Dynamics: A Case of Production–Inventory System  (P. S. R. K. Nageswara Rao, P. Usha Sri, K. Vizayakumar)....Pages 575-585
 Comparative Analysis of Small and Large Capacity Sized On-grid, Rooftop Solar PV Systems - An LCA Approach  (N. Leela Prasad, M. Shreyas, P. Usha Sri)....Pages 587-597
 Automated Real-Time Software Based Forecasting of Climate Change Using Chlorophyll Content on Agriculture  (K. Sujatha, K. S. Thivya, S. Elakkiya, V. Srividhya, NPG. Bhavani, Bhuvaneshwari Nagarajan)....Pages 599-606
 Studies on Drop Test of a Helmeted Head Form with and Without Chinstrap Using LS-Dyna  (Madipalli Manisha, Suresh Lonka, R. Dhanasekaran, S. Sreenatha Reddy)....Pages 607-620
 Design and Implementation of SEPIC Converter Based Nine-Level MLI Fed IM with PI, FLC, and ANN Controller  (S. Karthikeyan, K. Lakshmi, S. Gobhinath)....Pages 621-631
 Preparation and Experimental Evaluation of Membrane Electrode Assembly of Proton Exchange Membrane Fuel Cell  (Syed Aslam, Md. Masood, Sudheer Prem Kumar)....Pages 633-640
 Relative Importance Analysis of Factors Influencing Sea Port Service Quality  (S. Hemalatha, Lingaraju Dumpala, B. Balakrishna)....Pages 641-649
 Photovoltaic/Thermal (PV/T) System Performance Effects Using Conventional/Modern Cooling Techniques with and Without PCM  (D. Kameswara Rao, K. Sudhakar Reddy, V. V. Subba Rao)....Pages 651-665
 Studies on Emergency Alert for Women with Smart Dollar  (R. Dhanasekaran, S. Sreenatha Reddy, Mohammed Sirajuddin, Harisaiteja Nanaboina, I. Jahnavi)....Pages 667-673
 A Comparative Analysis of Multi-criteria Decision-Making Techniques to Optimize the Process Parameters in Electro Discharge Machine  (J. Anitha, Raja Das)....Pages 675-686
 Studies on Customized Compression Bandage Materials for Healing Injured Part  (S. Sreenatha Reddy, R. Dhanasekaran, M. Srihari, Sirgiripet Sai Kiran, S. Kalyan, T. Anvesh Kumar)....Pages 687-694
 Investigation on Effect of Industrial Waste on Tribological Properties of Polymer Composites  (V. L. Raja, K. Muralidharan, S. Lakshman Kumar, K. Shanmugavel)....Pages 695-703
 Computational Analysis of Concentrating Solar Boiler Uses with and Without Graphene Coating  (Mohammad Arif Hussain, S. Nagakalyan, M. Prakashbabu)....Pages 705-712