Microcomputer Application in Process Control. Selected Papers from the IFAC Symposium, Istanbul, Turkey, 22–25 July 1986

Content: 
IFAC PROCEEDINGS SERIES, Page ii
Front Matter, Page iii
Copyright, Page iv
IFAC SYMPOSIUM ON MICROCOMPUTER APPLICATION IN PROCESS CONTROL, Page v
PREFACE, Page vii, A.F. KONAR, E. ADALI
TRENDS IN INSTRUMENTATION AND CONTROL, Pages 1-3, M. Thoma
FAST ALGORITHMS AND ARCHITECTURES FOR SIGNAL/IMAGE PROCESSING AND UNDERSTANDING IN INTELLIGENT AUTOMATION SYSTEMS, Pages 5-11, O. Ersoy
FAILURE DETECTION AND ISOLATION IN COMPLEX PROCESS PLANTS A SURVEY, Pages 13-23, J. Gertler
EDUCATION FOR MICROPROCESSOR APPLICATION IN CONTROL, Pages 25-31, W. Schaufelberger, H. Good, A. Itten
METHODOLOGY FOR LARGE-SCALE PROCESS CONTROL SYSTEM DESIGN, Pages 33-45, A.F. Konar
THE THREE WAVES OF AUTOMATIC CONTROL, Pages 47-52, M. Cuénod
ENERGY MANAGEMENT FOR PROCESS INDUSTRY: HOW MUCH CONTROL IS NEEDED, Pages 53-57, A. Kaya, M.A. Keyes
A MICROPROCESSOR-BASED MODEL REFERENCE ADAPTIVE CONTROL SYSTEM FOR HYDROELECTRIC GENERATING SET, Pages 59-62, Wang Bailin
ADAPTIVE ROBUST SPEED REGULATOR FOR HYDROELECTRIC GENERATING SET, Pages 63-65, Wang Hong
NEW CONTROL ALGORITHMS BASED ON THE SLIDING MODE CONTROL METHODOLOGY, Pages 67-71, S.Z. Sarptürk, O. Kaynak
A GENERATIVE MODEL FOR ASYNCHRONOUS FINITE-VALUED TIME SIGNALS AS APPLIED TO COMPUTER-BASED PROCESS CONTROL, Pages 73-76, S.Y. Kwankam, M.E. Kaliski, A.T. Miller
ASSEMBLER GENERATED BINARY TEST SIGNALS FOR PROCESS IDENTIFICATION, Pages 77-82, I.A. Henderson, A.A. Ibrahim, J. McGhee, D. Sankowski
A MULTIPROCESSOR ARCHITECTURE AND ITS APPLICATION TO ADAPTIVE CONTROL, Pages 83-88, F. Cesarini, G. Soda, G. Zappa
MICROPROCESSOR IMPLEMENTED SUB-OPTIMUM SMITH CONTROLLERS FOR TEMPERATURE CONTROL, Pages 89-93, C. Batur, J. Braun
USING EXPERT SYSTEMS TO TROUBLESHOOT MICROPROCESSOR-BASED CONTROL SYSTEMS: AN EXPECTATION-BASED APPROACH, Pages 95-98, P. Schaefer, H.A. Guvenir
AN ASSOCIATIVE MEMORY BASED LEARNING CONTROL SCHEME WITH PI-CONTROLLER FOR SISO-NONLINEAR PROCESSES, Pages 99-105, E. Ersü, S. Wienand
APPLICATION OF MODERN NUMERICAL CONTROL TO AN INDUSTRIAL ROTARY CEMENT KILN, Pages 107-112, J.-D. Marcuard, A. Meister
SOFTWARE DEVELOPMENT AND ON LINE TESTS OF A MICROPROCESSOR BASED AUTOMATIC START UP SYSTEM FOR A FLUIDIZED BED LIGNITE COMBUSTOR, Pages 113-116, H. Midoğlu, E. Tulunay
COST-OPTIMIZED ENERGY CONSUMPTION IN SEWAGE TREATMENT PLANTS ON-LINE CONTROLLED BY DISTRIBUTED MICROPROCESSOR SYSTEMS, Pages 117-122, G. Flotho
DISTRIBUTED MICROPROCESSOR-BASED CONTROL SYSTEMS FOR FLUE GAS CLEANING, Pages 123-129, W. Latzel, H. Kahle
FAULT-TOLERANT MICROCOMPUTER CONTROL OF A HEAT EXCHANGER NETWORK, Pages 131-136, R.A. Martini, A. Cinar
MICROCOMPUTER APPLICATION IN LARGE POWER PLANTS, Pages 137-142, B. Bachmann, H. Cvetko, M. Schurtenberger
MICROCOMPUTER AND COMPUTER APPLICATIONS IN THE HYDRO-ELECTRIC POWER PLANTS KARAKAYA AND ATATURK, Pages 143-149, M. Cuénod, H. Regli, M. Schurtenberger
THE APPLICATION OF INTEL 8080 MICROCOMPUTER SYSTEM TO MEASUREMENT AND CONTROL OF ENERGY AND POWER OF STEAM, Pages 151-155, R. Zarzycki
SPEED CONTROL OF KAPLAN TURBINE BY USING MICROPROCESSOR, Pages 157-161, B.T. Akgün, A.E. Harmanci, M.K. Sarioğlu, M. Güleç
REAL TIME CONTROL OF THE POWER PROVIDED BY TWO AEROGENERATORS FROM A SINGLE SPECIALIZED PROCESSOR, Pages 163-166, C. Kraif, S. Billo, P. Rouan, L. Protin
A CENTRALIZED AGRICULTURAL IRRIGATION SYSTEM, Pages 167-171, A.F. Çalikoğlu, G. Tanyeri, O. Arkut
MULTIPROCESSOR CONTROLLED ROBOTS, Pages 173-178, D. Naunin Cevik, K. Cevik, H.-C. Reuss
MULTI-MICROCOMPUTER ROBOT CONTROL SYSTEM USING A SPECIAL ROBOTARITHMETIC- PROCESSOR FOR ADVANCED APPLICATIONS OF ROBOT MANIPULATORS, Pages 179-184, K. Rathgeber, M. Schnell
EXTERNAL CONTROL AND GRAPHICS SIMULATION OF A TRACKING ROBOT, Pages 185-190, M.B. Zaremba, W.J. Bock
OPTICAL PROXIMITY SENSOR SYSTEMS FOR INTELLIGENT ROBOT HANDS, Pages 191-196, E. Ersü, G. Kegel
DEVELOPMENT OF A CONTROL SYSTEM FOR A FILM PROCESSING DEVICE AND TECHNOLOGY TRANSFER TO AN INDUSTRIAL COMPANY, Pages 197-201, M. Ardac, B. Schürmann, H. Rake
SUBSTANTIAL IMPROVEMENTS OF THE PERFORMANCE OF AXIAL WINDERS BY ADAPTIVE STATE SPACE CONTROL, Pages 203-208, W. Höger, D. Schröder
FAULT-TOLERANT MICROPROCESSOR-BASED CONTROL SYSTEM FOR MULTIPLE LIFT INSTALLATIONS, Pages 209-213, J. Duato
DISTRIBUTED CONTROL SYSTEM FOR MACHINES IN MANUFACTURING, Pages 215-218, G. Haidegger, G. Csurgai, L. Frittmann, L. Revesz
SELF-TUNING CROSS PROFILE CONTROL FOR A PAPER MACHINE, Pages 219-224, A. Gräser, W. Neddermeyer
THE EXPERIMENTAL CLASSIFICATIONS OF THE LINEAR MODELS OF THE LATHE CUTTING MECHANISMS, Pages 225-230, N. Olgac, G. Zhao, J. Guttermuth
ADAPTIVE TRACKING ALGORITHMS AND THEIR APPLICATION TO A MACHINE-TOOL, Pages 231-236, P. Hulliger, Ch. Kohler
MODELLING AND ANALYSIS OF A STEPPER MOTOR DRIVEN FEED-DRIVE SYSTEM OF A CNC LATHE, Pages 237-241, B.E. Platin, B. Çelik
FAST POSITION CONTROL WITH MICROPROCESSOR FOR MACHINE TOOLS, Pages 243-247, U. Kunz, W. Oberschelp
PANTOGRAPH WITH MICROCOMPUTER, Pages 249-252, E. Adali
A LANGUAGE FOR CNC, Pages 253-259, E. Adali, F. Tunali
AUTHOR INDEX, Page 261
SUBJECT INDEX, Pages 263-264
IFAC Publications, Published and Forthcoming volumes, Pages ibc1-ibc2