Lubricants and Lubrication: Proceedings of the 21th leeds-Lyon Symposium on Tribology

Content: 
Edited by
Page iii

Copyright page
Page iv

Introduction
Pages v-vii
Duncan Dowson, Chris Taylor, Tom Childs

In Memorium Professor Maurice GODET 1930-1993
Pages 3-6
Gérard Dalmaz

Effect of automotive technology and environmental factors on lubricant requirements Original Research Article
Pages 7-11
T.W. Bates

Environmental Impact of Lubricants Original Research Article
Pages 15-23
R.C. Coy, Y. Michopoulos, J.P.T. Wilkinson

Comparative analysis of the lubricating power between a pure mineral oil and biodegradable oils of the same mean iso grade Original Research Article
Pages 25-30
A. Kabuya, J.L. Bozet

Transition Phenomena of Lubricating Oils and Greases in a Low Temperature Range Examined by a Torsional Braid Analysis Original Research Article
Pages 31-44
S. Sasanuma, K. Matsubara

Friction Regimes in the Lubricants Solid-State Regime Original Research Article
Pages 45-51
D.J. Schipper, O. Maathuis

Granular Lubrication; a Simple Model and Trends Original Research Article
Pages 53-62
A.A. Lubrecht, Y. Berthier

The Role of Synovial Fluid in Joint Lubrication Original Research Article
Pages 65-69
K. Ikeuchi

The effect of stationary loading on the friction and boundary lubrication of articular cartilage in the mixed lubrication regime Original Research Article
Pages 71-83
H. Forster, J. Fisher, D. Dowson, V. Wright

Measurement of lubricating film thickness with thin layers of permeable hydrogels and non-permeable polyurethane under entraining action Original Research Article
Pages 85-91
G. McClure, Z.M. Jin, J. Fisher, B.J. Tighe

Analysis of artificial hip joints as spherical bearings Original Research Article
Pages 93-98
M. Kothari, J.F. Booker, D.L. Bartel

Lubrication in metal forming Original Research Article
Pages 101-112
W.R.D. Wilson

Reappraisal of hydrodynamic lubrication in metal rolling process Original Research Article
Pages 113-117
A.M.A. El-Butsh, T.H.C. Childs, O.A.M. Mokhtar, R. El-Badrawy

Wear and Corrosion in the Forming of Beverage Cans Original Research Article
Pages 119-127
S. Mischler, E.A. Rosset, D. Landolt, G. Brackenbury

The Influence of Interface Material-Lubricant Combinations on Automotive Gearbox Synchronizer Performance Original Research Article
Pages 131-141
J.F. Maston, D.C. Barton

Effects of Oil Feed Temperature on the Performance of an Elliptical Bore Bearing Original Research Article
Pages 143-151
M.-T. Ma, C.M. Taylor

Brittle-Ductile Transitions in High Density Polyethylene Films Original Research Article
Pages 153-160
B.J. Briscoe, P.S. Thomas

Visualisation of starved grease and fluid lubricant films Original Research Article
Pages 161-166
P.M. Cann, H.A. Spikes

“Recent Developments in High-Pressure Rheology of Lubricants” Original Research Article
Pages 169-187
Scott Bair

Static and Dynamic Compressibility of Lubricants Under High Pressures Original Research Article
Pages 189-198
P. Vergne

High Pressure Viscosity and Shear Response of Oil using the Rotating Optical Micro-Viscometer Original Research Article
Pages 199-205
P.L. Wong, S. Lingard, A. Cameron

Optimisation of the Rheological Behaviour of Thickened Liquid Lubricants for Spacecraft Applications Original Research Article
Pages 207-216
P. Prat, P. Vergne, M. Pochard, J. Sicre

Elastohydrodynamic lubrication of real surfaces Original Research Article
Pages 219-227
R.W. Snidle, H.P. Evans

Thermal and non-Newtonian analysis of EHD line contacts Original Research Article
Pages 229-247
J. Seabra, A. Sottomayor, A. Campos, L. Ferreira

Starved Film Thickness: a Qualitative Explanation Original Research Article
Pages 249-257
F. Chevalier, A.A. Lubrecht, P.M.E. Cann, F. Colin, G. Dalmaz

Numerical Simulation of Waviness in A Circular Ehl Contact, Under Rolling/Sliding Original Research Article
Pages 259-272
C.H. Venner, A.A. Lubrecht

A New Method of Compensating the Compressibility in an Air Bearing Original Research Article
Pages 275-281
Tsuyoshi Ohsumi, Ken Ikeuchi

Optimization of air compliant thrust bearings Original Research Article
Pages 283-289
I. Iordanoff, P. Hermel, P. Stefan

Developments of Aerodynamic Foil Bearings for Small High-speed Rotor Original Research Article
Pages 291-299
K. Hayashi, K. Hirasata

A Tribological Approach to Determine the Friction and Wear Properties of New Environmentally Benign Diesel Fuels in Conjunction with Wear Mechanisms in Critical Parts of Diesel Injection Equipment Original Research Article
Pages 303-326
K. Meyer, U. Stolz, P. Rehbein

Testing high temperature lubricity of waterbased and synthetic hydraulic fluids Original Research Article
Pages 327-334
Eldar Onsøyen

Local Surface Strains in Asperity Contacts: Their Influence on Lubricated Wear. Original Research Article
Pages 335-341
Y. Yang, A.A. Torrance

Validation of a Piston Ring-Pack Lubrication Model that Includes Realistic Lubricant Rheology Original Research Article
Pages 345-354
R.I. Taylor, M.A. Brown, D.M. Thompson

Analysis of Friction in a Modern Automotive Piston Ring Pack Original Research Article
Pages 355-365
C.D. Radcliffe, D. Dowson

Effects of Bore Out-of-Roundness on the Predicted Performance of Piston Rings in Internal Combustion Engines Original Research Article
Pages 367-379
M.-T. Ma, I. Sherrington, E.H. Smith

Lubricated Sliding-A Review of Chemical and Physical Effects Original Research Article
Pages 383-398
Kenneth C. Ludema

The direct observation of the anti-wear action of ZDDP Original Research Article
Pages 399-408
J.S. Sheasby, T.A. Caughlin

Frictional properties of organomolybdenum compounds in the presence of ZDTPs under sliding conditions Original Research Article
Pages 409-422
M. Muraki, H. Wada

Investigation of Interactions Between Antiwear and Dispersant Additives and Their Effect on Surface Activity of Zddp Original Research Article
Pages 423-432
H. Mansuy, P. Beccat, Y. Huiban, T. Palermo, B. Desbat

Angular Contact Ball Bearing Dynamics, an Experimental and Theoretical Investigation Original Research Article
Pages 435-443
JJ Chapman

Air Cooled Bearings for Use with High Speed Electric Motors Original Research Article
Pages 445-453
J.E.L. Simmons, D. Horner

Starvation and Cavitation Effects in Finite Grooved Journal Bearing Original Research Article
Pages 455-464
B. Vincent, P. Maspeyrot, J. Frěne

Friction of adsorbed layers of poly-isoprene between two cobalt surfaces Original Research Article
Pages 467-477
J.-M. Georges, A. Tonck, D. Mazuyer, J.-L. Loubet, E. Georges

Behaviour of lubricants in the mixed elastohydrodynamic regime Original Research Article
Pages 479-485
G. Guangteng, H.A. Spikes

Visual Observation of the Process of Scuffing Original Research Article
Pages 487-494
J.C. Enthoven, H.A. Spikes

Measurement of Elastohydrodynamic Film Formation in Rolling Contacts at Very High Pressures Original Research Article
Pages 497-502
M Smeeth, P.M. Cann, H.A. Spikes

The Friction and Lubrication of elastomers Original Research Article
Pages 503-511
A. Arvanitaki, B.J. Briscoe, M.J. Adams, S.A. Johnson

A mass conserving modal analysis for elastohydrodynamic lubrication Original Research Article
Pages 513-523
S. Boedo, J.F. Booker, M.J. Wilkie

Transient EHD Lubrication of Concentrated Line Contacts — Part 1: Steady-State and Pure Squeeze Cases Original Research Article
Pages 525-543
Harry van Leeuwen, Gerard Haagh, Peter van Bavel

A General Approximate Solution For Film Thickness For a Lubricated Elastic Cylindrical Line Contact Involving a Compliant Layer On a Rigid Substrate Under Entraining Motion Original Research Article
Pages 547-554
Z.M. Jin, D. Dowson, J. Fisher

Pressure Spikes in EHL Original Research Article
Pages 555-564
J.A. Greenwood, G.E. Morales-Espejel

Impact elastohydrodynamics Original Research Article
Pages 565-582
D. Dowson, D. Wang

Performance Measurements of A Self Contained Ring-Oiled Bearing Original Research Article
Pages 585-593
D. Dowson, A.O. Mian, C.M. Taylor

Influence of the geometrical structure of porous sleeves on some tribological parameters of porous bearings Original Research Article
Pages 595-603
K. Cieślicki, K. Krzemiński

Comparisons Between Algebraic Nonlinear Turbulence Models. Application to Seals Analysis Original Research Article
Pages 605-614
M. Arghir, V. Lucas, J. Frěne

The Influence of Boundary Films on Lubricant Anti-Scuff Performance Original Research Article
Pages 617-633
D. Cooper, A.J. Moore

Sliding Friction and Wear of Ceramic/Ceramic Couples Lubricated with Hexadecane Original Research Article
Pages 635-658
G. Bartelt

Study of tribochemical film formation using x-ray absorption and photoelectron spectroscopies Original Research Article
Pages 659-669
M. Kasrai, M. Puller, M. Scaini, Z. Yin, R.W. Brunner, G.M. Bancroft, M.E. Fleet, K. Fyfe, K.H. Tan

Written Discussion - Contributions
Pages 671-687

List of Delegates
Pages 689-696