In-situ Studies with Photons, Neutrons and Electrons Scattering

In-situ Studies with Photons, Neutrons and Electrons
Scattering
Preface
Contents
1 In Situ Study of Phase Transformation in Steel During Welding
2 In Situ Studies of Phase Transformation and Residual Stresses in LTT Alloys During Welding Using Synchrotron Radiation
3 In Situ Scanning Electron Microscopy High Temperature Deformation Experiments to Study Ductility Dip Cracking of Ni--Cr--Fe Alloys
4 Grain Nucleation and Growth of Individual Austenite and Ferrite Grains Studied by 3DXRD Microscopy at the ESRF
5 Direct Analysis of Solidification-Mode During Welding for the Assessment of Hot-Cracking
6 In Situ Synchrotron Study of Inclusions in the Weld Pool for the Assessment of Nucleation Potency of Acicular Ferrite
7 Characterization of Solid State Phase Transformation in Continuously Heated and Cooled Ferritic Weld Metal
8 In Situ Determination of Phase Transformations and Structural Changes During Non-Equilibrium Material Processing
9 In Situ Phase Transformation Studies on a Transformation Induced Plasticity Steel Under Simulated Weld Thermal Cycles Using Synchrotron Diffraction
10 Imaging Fast Processes in Liquid Metal Foams and Semi-Solid Alloys Using Synchrotron Radioscopy with Spatio-Temporal Micro-Resolution
11 In Situ Measurements for Structural Integrity: An Engineer’s Perspective
12 In Situ Neutron Diffraction During Thermo-Mechanically Controlled Process for Low Alloy Steels
13 Influence of Plastic Deformation on the Residual Stress Distribution and Fatigue Behaviour of High Strength Steels Welds
Epilogue