Fatigue and Fracture Mechanics, Volume 35:

Content:
 Front Matter 
• Overview 
• Table of Contents 
•Part I. Sedlow Lecture 1. Trends in High Temperature Structural Integrity Assessment 
•Part II. Creep Assessment 2. European Code of Practice for Creep Crack Initiation and Growth Testing of Industrially Relevant Specimens 
 3. Creep Crack Growth Predictions in Component Using a Damage Based Approach 
 4. Modelling the Redistribution of Residual Stresses at Elevated Temperature in Components 
•Part III. Creep Modeling 5. Probabilistic Analysis of the Creep Crack Growth Rate of Type 316LN Stainless Steel by the Monte Carlo Simulation 
 6. Mechanistic Studies of High-Temperature Crack Initiation in Single Crystal Materials 
 7. Creep Crack Growth Analysis of Welded Joints for High Cr Heat Resisting Steel 
 8. Prediction of Scatter in Creep Crack Growth Data from Creep Failure Strain Properties 
 9. Analysis of Creep Crack Initiation and Growth in Different Geometries for 316H and Carbon Manganese Steels 
•Part IV. Fatigue Damage and Analysis 10. Fatigue Strength in Presence of Inhomogeneities: Influence of Constraint 
 11. Detection of Crack Initiation by Observations of Free Surface Condition 
 12. Volumetric and Surface Positron Annihilation Studies of Fatigue Damage Accumulation in a Steel Alloy 
 13. Elasto-Viscoplastic Behavior of the Ferritic Stainless Steel AISI 441-EN 1.4509 from Room Temperature to 850°C 
 14. Life Prediction of Fretting Fatigue of Ti-6Al-4V 
 15. Verification of Analytical Models in a Fracture Mechanics Based Approach to Modeling Fretting Fatigue 
 16. The Effect of Large Strain Cycling on the Fatigue Strength of Welded Joint 
 17. A Robust Structural Stress Parameter for Evaluation of Multiaxial Fatigue of Weldments 
•Part V. Fatigue Crack Growth 18. Observations on Photo-Emission and the Process Zone of a Fatigue Crack 
 19. Simulation on the Decrease in Threshold Stress Intensity Factor (SIF) Range due to High Maximum SIF 
 20. Anomalous Fatigue Crack Growth Data Generated Using the ASTM Standards 
 21. Development of a Circumferentially Throughwall Cracked Tube Specimen for Fatigue Crack Growth Rate Tests 
•Part VI. Environmental Fracture 22. Effect of Microstructure on Pit-to-Crack Transition of 7075-T6 Aluminum Alloy 
 23. The Role of Applied Potential on Environment-Assisted Cracking of Zirconium Alloys 
•Part VII. Fracture Mechanics Analysis 24. Elastic T-Stress Solutions of Embedded Elliptical Cracks Subjected to Uniaxial and Biaxial Loadings 
 25. Asymptotic Stress Fields for Thermomechanically Loaded Cracks in FGMs 
 26. Experimental Evaluation of the J or C* Parameter for a Range of Cracked Geometries 
•Part VIII. Fracture Toughness and Constraint 27. An Experimental and Numerical Study of the Fracture Strength of Welded Structural Hollow Section X-Joints 
 28. Constraint Corrected J-R- Curve and its Application to Fracture Assessment for X80 Pipelines 
 29. Use of Miniaturized Compact Tension Specimens for Fracture Toughness Measurements in the Upper Shelf Regime 
 30. An Investigation of Specimen Geometry Effects on the Fracture Behavior of a Polytetrafluoroethylene Polymer 
 31. Surface Roughness, Quasi-Static Fracture, and Cyclic Fatigue Effects on GFRP- and CFRP-Concrete Bonded Interfaces 
•Part IX. Ductile-Brittle Transition 32. Temperature Dependence and Variability of Fracture Toughness in the Transition Regime for A508 Grade 4N Pressure Vessel Steel 
 33. Application of the Reference Temperature to the Evaluation of Cleavage Fracture in HSLA-100 Steel 
 34. Prediction of the Shape of the KJ Ductile-to-Brittle Transition Temperature Curve for Ferritic Pressure Vessel Steels Using the Material's Resistance to Crack Extension KJ versus Δa Curve 
•Part X. Dynamic Fracture 35. Finite Element Simulation of Dynamic Crack Propagation for Complex Geometries without Remeshing 
 36. Analysis of Dynamic Fracture and Crack Arrest of an HSLA Steel in an SE(T) Specimen 
 37. Application of the Normalization Method to Dynamic Fracture Toughness Testing of Alloy 718 
 Author Index 
 Subject Index