Electromagnetic Reverberation Chambers: Recent advances and innovative applications (Electromagnetic Waves)

Contents
About the editor
Introduction | Guillaume Andrieu
	I.1 Motivation and goal
	I.2 Organization
	I.3 Usage
	References
1. Performance of reverberation chambers using the “well-stirred condition method” | Guillaume Andrieu
	1.1 The well-stirred condition method
	1.2 Detailed analysis of the method performance
	1.3 Examples of parametric analysis
	1.4 An alternative calibration procedure
	1.5 Conclusion
	References
2. Review of the stirring techniques proposed in the literature – performance assessment of the most common ones using the well-stirred condition method | Guillaume Andrieu
	2.1 Mechanical stirring techniques
	2.2 Source signal stirring techniques
	2.3 Source position stirring techniques
	2.4 Other mode stirring techniques
	2.5 Conclusion
	References
3. Frequency and time-domain performance assessment of vibrating intrinsic reverberation chambers | Guillaume Andrieu
	3.1 Description of the VIRC used
	3.2 Frequency-domain characterization
	3.3 Time-domain characterization
	3.4 Conclusion
	References
4. Probabilistic model about the influence of the number of stirring conditions considered during a radiated susceptibility test | Guillaume Andrieu
	4.1 About RS tests in RC
	4.2 Description of the probabilistic model
	4.3 Overtesting
	4.4 Determination of the minimum susceptibility level of the EUT (after a successful test)
	4.5 Conclusion
	References
5. Over-the-air testing of wireless devices in heavily loaded reverberation chambers | Kate A. Remley, Chih-MingWang and Robert D. Horansky
	5.1 Chamber characterization for OTA tests
	5.2 Over-the-air tests for radiated power and receiver sensitivity
	5.3 Replicating specific multipath channels for OTA test
	5.4 Uncertainty in OTA measurements with heavily loaded reverberation chambers
	5.5 Conclusion
	5.6 Acknowledgments
	References
6. From material absorption to dosimetry for exposure of animals in reverberation chambers | Philippe Besnier
	6.1 Losses and Q-factor
	6.2 The average absorption effective area of an object in a RC
	6.3 Dosimetry for animals
	6.4 Discussion
	References
7. Characterization of antenna efficiency in reverberation chambers | Wei Xue and Xiaoming Chen
	7.1 Antenna radiation efficiency measurement methods
	7.2 Statistical analysis of antenna efficiency measurement uncertainty
	7.3 Conclusion
	References
8. Characterization of antenna radiation pattern in reverberating enclosures | Guillaume Andrieu
	8.1 K-factor method
	8.2 Doppler spectrum method
	8.3 Time-gating method
	8.4 Comparison of the methods
	References
9. Radar cross-section estimation in reverberation chambers | Philippe Besnier
	9.1 Definition of radar cross section and the radar equation
	9.2 Radar cross-section measurements
	9.3 Scattered cross section and antenna patterns in reverberation chambers
	9.4 Theory of radar cross-section pattern measurements in reverberation chambers
	9.5 Validation on simple targets
	9.6 Discussion
	References
Conclusion | Guillaume Andrieu
	C.1 OTA test for new protocols
	C.2 “Anechoic” measurements
	C.3 Chaotic cavities
	C.4 VIRCs
	C.5 Future EMC strategy in the transportation industries
Index