Characterization of Minerals, Metals, and Materials 2017

Front Matter....Pages i-xxix
Front Matter....Pages 1-1
Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites....Pages 3-9
Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique....Pages 11-19
Izod Impact Test in Polyester Matrix Composites Reinforced with Blanket of the Malva and Jute Fibers....Pages 21-25
Tensile Behavior of Epoxy Matrix Composites Reinforced with Eucalyptus Fibers....Pages 27-31
The Dimensional Characterization of Jute Fabric Strips for Reinforcement in Composite Polymeric....Pages 33-40
Izod Toughness Behavior of Continuous Palf Fibers Reinforced Polyester Matrix Composites....Pages 41-47
Mechanical, Thermal, Morphology and Barrier Properties of Flexible Film Based on Polyethylene-Ethylene Vinyl Alcohol Blend Reinforced with Graphene Oxide....Pages 49-57
Radiation Effects on Crosslinking of Butyl Rubber Compounds....Pages 59-66
Front Matter....Pages 67-67
Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer....Pages 69-83
Aging Behaviour in Ni0.5CoxMn2.5−xO4 (x = 0.5, 0.8 and 1.1) Thermistors....Pages 85-89
Adsorption of Lead from Aqueous Solutions to Bentonite and Composite....Pages 91-100
Front Matter....Pages 101-101
Characterization of Low-Zinc Electric Arc Furnace Dust....Pages 103-109
Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method....Pages 111-119
Electrical and Microstructural Investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 Temperature Sensors....Pages 121-129
Front Matter....Pages 131-138
Enhanced Physical Properties of Thin Film Nanocomposites....Pages 139-144
A Study on the Size and Type of Inclusions in Si–Mn Combined Deoxidated Low Carbon Steel Strip....Pages 145-145
Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-Powder Composites....Pages 147-160
Front Matter....Pages 161-169
Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101....Pages 171-178
Front Matter....Pages 179-179
Front Matter....Pages 181-190
Synthesis of TiN Nano-Composite Powder by High-Energy Ball Milling of TiH2 Under Nitrogen Atmosphere....Pages 179-179
Application of AFM in Morphology Determination of Powder Material....Pages 191-199
Effects of Thermal Processing on Closed-Cell Aluminium Foams....Pages 201-201
Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams Under Drop Weight Impact....Pages 203-208
Deformation Mechanisms of Closed Cell-Aluminium Foams During Drop Weight Impact....Pages 209-216
Front Matter....Pages 217-224
Industrial Use of Brazilian Bentonite Modified by Mild Acid Attack....Pages 225-232
Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation....Pages 233-239
Ore Dressing and Technological Characterization of Palygorskite from Piauí/Brazil for Application as Adsorbent of Heavy Metals....Pages 241-241
Technological Characterization of Waste from Gold Mining Dam....Pages 243-250
Synthesis and Characterization of Sodalite and Cancrinite from Kaolin....Pages 251-259
Front Matter....Pages 261-267
Effect of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter....Pages 269-278
Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis....Pages 279-288
Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO–CO2 Atmospheres....Pages 289-289
Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors....Pages 291-299
Important Factors to Consider in FIB Milling of Crystalline Materials....Pages 301-310
Front Matter....Pages 311-319
Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl Media....Pages 321-328
Effect of Bromide Ions on the Pitting Corrosion of Hafnium in Anhydrous t-Butanol and Acetonitrile....Pages 329-336
Compression Behaviour of Semi-closed Die Forged AZ80 Extrusion....Pages 337-337
Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique....Pages 339-348
Front Matter....Pages 349-360
Development of a New Recycling Process of PGM from Metal-Supported Catalyst Using Complex Oxide....Pages 361-369
Front Matter....Pages 371-376
High Thermal Conducting Composites Using Percolation Theory....Pages 377-377
Sorption Characteristics of Low Density Polyethylene/Kola Nut Composite....Pages 379-382
Residual Stress Analysis Within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction....Pages 383-383
Tensile Behavior of Epoxy Matrix Composites Reinforced with Pure Ramie Fabric....Pages 385-392
Hemp Fiber Density Using the Pycnometry Technique....Pages 393-404
Preparation and Characterization of Clay Exfoliation and Vegetal Fibre on Properties of Recycled Low Density Polyethylene....Pages 405-413
Front Matter....Pages 415-421
Estimation of Dislocation Density in Metals from Hardness Measurements....Pages 423-428
Front Matter....Pages 429-437
Interfacial Strength Characterization in a High-Modulus Low-Density Steel-Based Fe-TiB2 Composite....Pages 439-439
Front Matter....Pages 441-449
Leaching of Copper–Cobalt Tailings from Democratic Republic of Congo....Pages 451-451
Optimum Operating Conditions and Characterisation of Lignin Extracted from Palm Fruit Bunch....Pages 453-460
Selection on the Process of Enriching Gold by Smelting from Refractory Gold Ores....Pages 461-461
Selection on the Process for Removing and Recovering Antimony from Antimonial Refractory Gold Ores....Pages 463-469
Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings....Pages 471-480
Characterization of Spent Printed Circuit Boards from Computers....Pages 481-488
Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte....Pages 489-498
Front Matter....Pages 499-506
Addition of Cellulose Nanofibers in Reactive Powder Concrete....Pages 507-514
Advanced Ion Column Solution for Low Ion Damage Characterization and Ultra-Fine Process....Pages 515-525
Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise....Pages 527-527
Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal....Pages 529-535
Front Matter....Pages 537-544
Characteristics of Stamp Charging Coke and Top Charging Coke....Pages 545-551
Mechanical Properties and Behavior of Additive Manufactured Stainless Steel 316L....Pages 553-560
Characterization of Mercury Jarosite....Pages 527-527
Characterization of Steel Production Dust and Their Use in Structural Ceramics....Pages 561-566
Charpy Toughness Behavior of Jute Fabric Reinforced Polyester Matrix Composites....Pages 567-575
Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo, Mexico....Pages 577-583
Contribution to the β Relaxation Study of the HDPE, LDPE and LLDPE....Pages 585-592
Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES....Pages 593-600
Effects of Wet Grinding on the Structure and Granularity of Biological Origin Aragonite and Its Polymorphic Transformation into Calcite....Pages 601-606
Evaluation of Ballistic Armor Behavior with Epoxy Composite Reinforced with Malva Fibers....Pages 607-615
Evaluation of the Pozzolanic Activity of Residue From the Paper Industry....Pages 617-626
Evaluation of the Properties of the Adhesive Mortar in the Fresh State with Addition of Glass Waste....Pages 627-635
Experimental Evaluation of the Influence of Mortar’s Mechanical Properties on the Behavior of Clay Masonry....Pages 637-645
Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method....Pages 647-655
Polymer Blend Based on Recycled Polyethylene and Ethylene Vinyl Acetate Copolymers Reinforced with Natural Fibers from Agricultural Wastes....Pages 657-662
Preliminary Study of the Effect of Stirring Rate, Temperature and Oxygen Pressure on the Leach Rate of Copper Powder, Generated by Grinding of Printed Circuit Boards of Computer....Pages 663-670
Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles....Pages 671-679
Production of Concrete Interlocking Blocks with Partial Replacement of Sand in Bulk by Waste Glass Machined....Pages 681-688
Reactive Powder Concrete Production with the Addition of Granite Processing Waste....Pages 689-697
Front Matter....Pages 699-707
Research on the Reason of the Different Type of Chloride Forming in the Process of Blast Furnace Ironmaking....Pages 709-718
Stress and Deformation Analysis of Hot Blast Stove Piping System....Pages 719-727
Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell....Pages 729-735
Study of Calcined Mixtures from Industrial Residues for Production of Agglomerates....Pages 527-527
Study of Synergistic Effect of Light Stabilizer Additive, Conventional and Nanoparticles, Applied to Polyethylene Films Submitted to Ultraviolet Radiation....Pages 737-745
Study of the Effect of Surface Liquid Flow During Column Flotation of Mining Tailing of the Dos Carlos Dam....Pages 747-756
Study on Bending Test on Concrete Structural Use Crumb Rubber as Substitute in Fine Aggregate....Pages 757-765
Texture Analysis and Anisotropic Properties of a Rolled CuZn36 Brass Alloy....Pages 767-775
The Influence of Titanium Content on the Sinter Ore Phase Structure and the Crack....Pages 777-785
The Use of Network Simplex Method for Planning the Incorporation of Recycled Paper Mill Sludge in Manufacturing of Ceramic Bodies....Pages 787-798
Use of Alkaline Solid Wastes from Kraft Pulp and Paper Mills, Dregs and Grits in Cement Production....Pages 799-807
Wood-to-Concrete Joints Using Steel Connectors: Experimental Evaluation....Pages 809-814
Back Matter....Pages 815-822
....Pages 823-831