Advances in Solid Oxide Fuel Cells and Electronic Ceramics II: Ceramic Engineering and Science Proceedings Volume 37, Issue 3

Content: Advances in Solid Oxide Fuel Cells and Electronic Ceramics II
 Contents
 Preface
 Introduction
 Solid Oxide Fuel Cells
 DEVELOPMENT OF SOFC TECHNOLOGY AT TAIWAN INSTITUTE OF NUCLEAR ENERGY RESEARCH
 ABSTRACT
 INTRODUCTION
 MEA DEVELOPMENT
 HIGH-TEMPERATURE SEALS DEVELOPMENT
 STACK DEVELOPMENT
 SYSTEM DEVELOPMENT
 CONCLUSION
 ACKNOWLEDGMENT
 REFERENCES
 DEVELOPMENT OF PLASMA SPRAYED PROTECTIVE LSM COATING IN INER
 ABSTRACT
 INTRODUCTION
 EXPERIMENTAL
 RESULTS AND DISCUSSION
 CONCLUSION
 REFERENCES. PRODUCTION AND CO-SINTERING AT 950°C OF PLANAR HALF CELLS WITH CuOGDC CERMET SUPPORTING ANODE AND Li2O-DOPED GDC ELECTROLYTEABSTRACT
 INTRODUCTION
 EXPERIMENTAL PROCEDURE
 RESULTS AND DISCUSSION
 CONCLUSIONS
 ACKNOWLEDGMENT
 REFERENCES
 SINTERING PROPERTIES OF TiC-Ni-Mo CERMET USING NANOSIZED TiC POWDERS
 ABSTRACT
 INTRODUCTION
 EXPERIMENTAL PROCESS
 RESULT AND DISCUSSION
 Carbon Coated Precursor Analysis
 Analysis of Synthesized TiC
 Sintering Properties of TiC-Ni-Mo
 Mechanical Properties of TiC-Ni-Mo
 Electrical Conductivity and Oxidation Properties
 CONCLUSION
 ACKNOWLEDGEMENT
 REFERENCES. ELECTRICAL AND MECHANICAL PROPERTIES OF PHLOGOPITE MICA/BaO-Al2O3-B2O3-SiO2-BASED GLASS SEALANTS FOR SOLID OXIDE FUEL CELLABSTRACT
 INTRODUCTION
 EXPERIMENTAL
 Materials and hybrid sealants preparation
 CTE measurement
 Microstructure observation
 High-temperature viscosity and mechanical strength measurement
 Area specific resistance measurement
 High-temperature leak test
 RESULTS AND DISSCUSION
 CONCLUSIONS
 ACKNOWLEDGMENT
 REFERENCES
 DIRECT UTILIZATION OF ETHANOL IN SOLID OXIDE FUEL CELLS: PREPARATION AND CHARACTERIZATION OF CeO2-Al2O3 BASED ANODES
 ABSTRACT
 1. INTRODUCTION. 2. MATERIALS AND METHODS3. RESULTS AND DISCUSSION
 3.1 Material Characterization
 3.2 Anode Characterization
 3.3 Anode Electrochemical Performance and Proposed Reaction Mechanisms
 4. CONCLUSION
 ACKNOWLEDGEMENTS
 REFERENCES
 CORROSION STUDY OF CERIA PROTECTIVE LAYER DEPOSITED BY SPRAY PYROLYSIS ON STEEL INTERCONNECTS
 ABSTRACT
 INTRODUCTION
 EXPERIMENTAL
 RESULTS AND DISCUSSION
 CONCLUSIONS
 ACKNOWLEDGMENTS
 REFERENCES
 SYNTHESIS OF Sr2MgMoO6 BY ATMOSPHERE-CONTROLLED CALCINATION METHOD AND CHARACTERIZATION FOR SOLID OXIDE FUEL CELLS
 ABSTRACT
 INTRODUCTION
 MATERIALS AND METHODS. Material preparationCharacterization
 RESULTS AND DISCUSSION
 CONCLUSIONS
 ACKNOWLEDGMENTS
 REFERENCES
 PHASE INTERACTION AND DISTRIBUTION IN MIXED IONIC ELECTRONIC CONDUCTING CERIA-SPINEL COMPOSITES
 ABSTRACT
 INTRODUCTION
 EXPERIMENTAL
 RESULTS AND DISCUSSION
 Microstructure analysis
 Electrical Conductivity
 Permeation Measurements
 Phase interaction study
 GDC-FCO cathode testing
 CONCLUSIONS
 ACKNOWLEDGEMENTS
 REFERENCES
 INTERFACE-MATCHING FOR BARIUM STRONTIUM FERRATE-CERIA BY DROP-COATING BUFFER LAYER
 ABSTRACT
 INTRODUCTION
 EXPERIMENTAL
 RESULTS AND DISCUSSION
 CONCLUSIONS.