Advances in Engineering Research and Application

Front Matter ....Pages i-xxi
 A Combination of Finite Impulse Response Neural Networks, ARIMA and Principal Component Analysis for Forex Market Prediction  (Hà Gia Sơn)....Pages 1-10
 A Magnetic Wheeled Robot for Steel Bridge Inspection  (Anh Q. Pham, Hung M. La, Kien T. La, Minh T. Nguyen)....Pages 11-17
 A New Refined Forecasting Model Based on the High - Order Time-Variant Fuzzy Relationship Groups and Particle Swam Optimization  (Nghiem Van Tinh)....Pages 18-34
 A Novel Determination of Boundaries of Cable Forces for Cable-Driven Parallel Robots with Frequency Constraint by Using Differential Evolution Algorithm  (Sy Nguyen-Van, Kwan-Woong Gwak)....Pages 35-46
 A Prediction Method of Dynamic Cutting Forces and Machine-Tool Vibrations When Milling by Using Ball-End Mill Cutter  (Nhu-Tung Nguyen, Yung-Chou Kao, Hoang Tien Dung, Do Duc Trung)....Pages 47-54
 A Solution to Adjust Kinetic of Industrial Robots Based on Alternative Trajectories  (Thang Nguyen Huu, Khanh Duong Quoc, Thuy Le Thi Thu, Long Pham Thanh)....Pages 55-65
 Calculation of Optimum Gear Ratios of Mechanical Driven Systems Using Worm-Helical Gearbox and Chain Drive  (Le Hong Ky, Tran Thi Hong, Nguyen Van Cuong, Luu Anh Tung, Nguyen Thanh Tu, Hoang Thi Tham et al.)....Pages 66-75
 A Study on Determination of Optimum Gear Ratios of a Two-Stage Worm Gearbox  (Luu Anh Tung, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, Nguyen Thanh Tu, Le Xuan Hung et al.)....Pages 76-84
 A Study on Determining Optimum Gear Ratios of Mechanical Driven Systems Using Two-Step Helical Gearbox with First Step Double Gear Sets and Chain Drive  (Nguyen Khac Tuan, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, Nguyen Thanh Tu, Luu Anh Tung et al.)....Pages 85-93
 A Study on Electroless Copper Plating on Poly (Methyl Methacrylate) Through Organic Covalent Grafting  (Ly Viet Anh, Ngoc Pi Vu)....Pages 94-99
 A Vision-Based Method of Reverse Engineering for 2D CNC Machining  (Huu-Cuong Nguyen, Phuoc-Loc Nguyen)....Pages 100-106
 An Analysis of Lung Sound from Electronic Stethoscope with Spectrogram  (Trinh Quang Duc, Nguyen Van Son, Nguyen Hoai Giang, Dao Huy Du, Ha Ngoc Thu)....Pages 107-113
 An Experimental Investigation of the Cutting Forces Coefficients in Flat-End Mill Processes  (Nhu-Tung Nguyen, Anh-Tuan Do, Gia Thinh Bui)....Pages 114-120
 A Study on Optimization of Manufacturing Time in External Cylindrical Grinding  (Luu Anh Tung, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, T. Muthuramalingam, Nguyen Huu Phan et al.)....Pages 121-129
 Applying Matrix Factorization for Predicting Click Through Rate on Advertizing in Apps on Mobile Devices  (Quang H. Nguyen, Tuan-Dung Cao)....Pages 130-137
 Approximate Response of a Non-linear Vibration Isolation System Subjected to Harmonic Excitation  (Gun-Myung Lee)....Pages 138-143
 Automatic Optical Inspection for Magnetic Particle Detection of Forging Defects  (Quang-Cherng Hsu, Rui-Hong Ni, Jhan-Hong Ye, Ngoc-Vu Ngo)....Pages 144-154
 Calculating Optimum Gear Ratios of Mechanical Drive Systems Using Two-Stage Helical Gearbox with Second-Stage Double Gear Sets and Chain Drive for Minimum Gearbox Length  (Nguyen Thi Hong Cam, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, Luu Anh Tung, Nguyen Thanh Tu et al.)....Pages 155-163
 Calculating Effects of Dressing Parameters on Surface Roughness in Surface Grinding  (Do Duc Trung, Nguyen Hong Son, Tran Thi Hong, Nguyen Van Cuong, Ngoc Pi Vu)....Pages 164-169
 Calculation of Optimum Gear Ratios of Mechanical Driven Systems Using Two-Stage Helical Gearbox with First Stage Double Gear Sets and Chain Drive  (Le Xuan Hung, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, Nguyen Thanh Tu, Nguyen Thi Hong Cam et al.)....Pages 170-178
 Calculation of Optimum Gear Ratios of Two-Step Worm Gearbox  (Nguyen Manh Cuong, Hoang Thi Tham, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, Nguyen Thanh Tu et al.)....Pages 179-188
 Calibration of a Laser-Plane Sensor in 5-Axis Machine Tool  (Nguyen Duy Minh Phan, Yann Quinsat, Claire Lartigue)....Pages 189-195
 Classifying 3D Models Based on Transcending Local Features  (Nguyen Van Tao, Nong Thi Hoa)....Pages 196-201
 Control Parallel Robots Driven by DC Motors Using Fuzzy Sliding Mode Controller and Optimizing Parameters by Genetic Algorithm  (Vu Duc Vuong, Nguyen Quang Hoang, Nguyen Tien Duy)....Pages 202-214
 Design a Temperature Control System Using Halogen Lamp  (Nam H. Nguyen, Tung X. Vu, Cuong K. Pham, Hai V. Bui, Du H. Dao)....Pages 215-219
 Design Axial Flux Permanent Magnet Machine for In-Wheel of Electric Vehicle  (Nguyen Manh Hung, Do Manh Cuong, Do Nguyen Hung, Dao Huy Du)....Pages 220-228
 Detection and Diagnosis Gray Spots on Tea Leaves Using Computer Vision and Multi-layer Perceptron  (Pham Thanh Binh, Tang Cam Nhung, Dao Huy Du)....Pages 229-237
 Determining Optimal Gear Ratios of Mechanical Drive Systems Using Two-Stage Helical Gearbox with Second-Stage Double Gear Sets and Chain Drive for Minimal System Cross Section Area  (Nguyen Thanh Tu, Le Hong Ky, Tran Thi Hong, Nguyen Van Cuong, Luu Anh Tung, Bui Thanh Hien et al.)....Pages 238-248
 Determining Optimum Gear Ratios of Mechanical Driven Systems Using Three Stage Bevel Helical Gearbox and Chain Drive  (Tran Thi Phuong Thao, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, Nguyen Thanh Tu, Le Xuan Hung et al.)....Pages 249-261
 Development of a Backlight Imaging System to Investigate Liquid Breakup in Near-Field Swirl Atomizer  (Phuong X. Pham, Nam V. T. Pham, Lap D. Vu, Kien T. Nguyen, Thin V. Pham, Vu H. Nguyen et al.)....Pages 262-267
 Dynamic Stiffness Formulation for Vibration of FGM Stepped Annular Plates of Varying Thickness with Non-homogenous Material  (Le Quang Vinh, Nguyen Dong Anh, Nguyen Manh Cuong)....Pages 268-280
 Effects of Suspension Design Parameters of a Semi-trailer Truck on Vehicle Ride Comfort and Road Surface Friendliness  (Le Van Quynh, Bui Van Cuong, Le Xuan Long, Do Van Quan)....Pages 281-289
 Effects of the Die Inlet Angle and Axial Feed on Rotary Swaged Ti-6Al-4V Alloy Rods  (Dinh Xuan Ta, Van Thao Le, Van Canh Nguyen)....Pages 290-295
 Effects of the Tube Diameter on the Mechanical Properties of Black Phosphorene Nanotubes  (Van-Trang Nguyen, Minh-Quy Le, Danh-Truong Nguyen)....Pages 296-302
 Evaluation Motion Comfort of Sleeper Coach, the Type of Vehicle Is Manufactured and Assembled at Vietnam, Effect of Random Road Profile Based on Standard ISO 8608  (Truong Manh Nguyen, Lap Duc Vu, QuangThanh Nguyen)....Pages 303-309
 Control and Optimize Black Tea Fermentation Using Computer Vision and Optimal Control Algorithm  (Pham Thanh Binh, Dao Huy Du, Tang Cam Nhung)....Pages 310-319
 Experimental Study of Micro Vibration of the Ring Gear in Internal Gear Motor and Pump Under Unstable Working Condition  (Trong Hoa Pham, Dinh Tu Nguyen, Thanh Cong Nguyen, Juergen Weber, Lutz Müller)....Pages 320-327
 Experimental Study on Effects of Process Parameters on Superplastic Deformation Ability of 7075 Aluminium Alloy Using Taguchi Method  (Nguyen Manh Tien, Nguyen Truong An, Tran Duc Hoan, Lai Dang Giang, Le Trong Tan)....Pages 328-334
 Exploiting CP in BICM-ID OFDM System  (Tran Anh Thang)....Pages 335-341
 Fabrication of Polymeric Micro Structures Using Improved Hot Embossing Technique  (Pham Hong Phuc, Dao Viet Dzung)....Pages 342-348
 Fault Detection for Rotating Machines in Non-stationary Operations Using Order Tracking and Cepstrum  (Nguyen Phong Dien, Nguyen Trong Du)....Pages 349-356
 FEM Simulation for a MEMS Vibratory Tuning Fork Gyroscope  (Vu Van The, Tran Quang Dung, Do Thi Kim Lien)....Pages 357-365
 Finite Element Analysis of the Lithium Diffusion in the Silicon Copper Nano-pillar  (Huu-Tu Nguyen, Van-Trang Nguyen, Minh-Quy Le)....Pages 366-372
 FPGA Implementation of Optimal PN_Sequences by Time_Multiplexing Technique  (Nguyen Van Son, Le Chi Quynh, Tran Vu Kien, Dao Huy Du, Dang Khanh Hoa)....Pages 373-380
 Handling Forecasting Problems Based on Two-Factor High-Order Fuzzy Time Series and Particle Swarm Optimization  (Nghiem Van Tinh, Nguyen Tien Duy)....Pages 381-393
 Heat Transfer Model and Critical Driving Frequency of Electrothermal V-Shaped Actuators  (Dzung Tien Nguyen, Kien Trung Hoang, Phuc Hong Pham)....Pages 394-405
 Identification of Gear Fault Signal Based on Adaptive EMD Feature Extraction and Optimal GA-LSSVM Classification Model  (VietHung Nguyen, TienDung Hoang, VanTrong Thai, QuocTuan Nguyen, XuanChung Nguyen)....Pages 406-418
 Identification of Machining Conditions in the Hard Milling of Hardened SKD 61 Steel  (Huu-That Nguyen, The-Vinh Do, Nguyen-Anh-Vu Le)....Pages 419-425
 Influence of Cutting Conditions on the Surface Roughness When Hole Turning Heat-Treated SKD11 Steel  (Nguyen Hong Son, Hoang Xuan Thinh, Nhu-Tung Nguyen, Do Duc Trung)....Pages 426-435
 Influence of Lubricant Parameters on Surface Roughness of Workpiece When Grinding SKD11 Steel  (Hoang Tien Dung, Do Duc Trung, Nguyen Van Thien, Le Hong Ky, Kitikhammoune Sonpheth)....Pages 436-447
 Investigations of Defects in Inverted Organic Solar Cells  (Jordan Goilard, Kai Xue, Cédric Renaud, P. Y. Chen, Sheng-Hsiung Yang, Thien-Phap Nguyen)....Pages 448-454
 Kinematic Analysis of a Resonant Flexible-Wing Nano Air Vehicle Using a Bond Graph Approach  (Le Anh Doan, Thanh Nghi Ngo, Nhu Thanh Vo, Phuoc Vinh Dang)....Pages 455-461
 Manufacturing Cost of Robot Structures with Tolerance Calculated on the View of Kinetic Response and that of Technology  (Thang Nguyen Huu, Khanh Duong Quoc, Thuy Le Thi Thu, Long Pham Thanh)....Pages 462-470
 Microstructure and Permeability of Anisotropic Open-Cell Foams  (Van Hai Trinh)....Pages 471-476
 Multiexciton Properties in CdSe Core and CdSe/CdSe1-xSx Tetrapod Nanostructures Under Pulse Wave Optical Pumping  (Nguyen Thi Luyen, Nguyen Xuan Ca, Pham Minh Tan)....Pages 477-486
 Multi-response Optimization of WEDM Process Parameters of Inconel 718 Alloy Using TGRA Method  (T. Muthuramalingam, L. Ganesh Babu, K. Sridharan, T. Geethapriyan, K. P. Srinivasan)....Pages 487-492
 Multi-responses Optimization of Process Parameters in Die-Sinking EDM Process on SKD11 Steel Using PSI Based Taguchi Method  (Nguyen Huu Phan, Nguyen Van Duc, Pham Van Bong, T. Muthuramalingam, Ngoc Pi Vu, Le Xuan Hung)....Pages 493-499
 New Vibration Model to Analyze the Correlation of Components in the Washing Machine Suspension System  (Nguyen Thi Hoa, Ngo Nhu Khoa, Nguyen Thi Bich Ngoc)....Pages 500-511
 Nonlinear Backstepping-Sliding Mode Control of Electro-Hydraulic Systems  (Tung Lam Nguyen, Hong Quang Nguyen, Manh Cuong Nguyen, Van Manh Tran, Danh Huy Nguyen, Anh Duc Nguyen)....Pages 512-519
 Nonlinear Design of Adaptive Controllers for Bilateral Teleoperation Systems with Variable Time Delays  (Dang Ngoc Trung, Dao Phuong Nam, Do Trung Hai)....Pages 520-533
 Optimal Planning Model for Grid-Connected Micro-grids Considering Uncertainties of Renewable Sources, Loads and Electrical Price  (Vu Van Thang, Nguyen Hien Trung)....Pages 534-545
 Optimization of Exchanged Grinding Wheel Diameter for Minimum Cost in External Grinding  (Nguyen Anh Tuan, Le Hong Ky, Tran Thi Hong, Nguyen Van Cuong, Luu Anh Tung, Nguyen Thanh Tu et al.)....Pages 546-556
 Optimization of Manufacturing Time in Internal Grinding  (Le Xuan Hung, Le Hong Ky, Tran Thi Hong, Nguyen Van Cuong, Do Duc Trung, Nguyen Huu Phan et al.)....Pages 557-565
 Optimization of Manufacturing Time in Surface Grinding  (Luu Anh Tung, Tran Thi Hong, Nguyen Van Cuong, Le Hong Ky, T. Muthuramalingam, Do Duc Trung et al.)....Pages 566-574
 Optimization of the Infrared Assisted Heat Pump Drying Operation of White Leg Shrimp Using Particle Swarm Optimization  (Thi Thom Hoang, Thi-Nguyen Nguyen, Nhu Chinh Le)....Pages 575-581
 Parameter Optimization of Pseudo-Rigid-Body 3R Model for Modeling Large Deflection of Compliant Mechanisms  (Thi Thanh Nga Nguyen, David Schoenen, Mathias Hüsing, Burkhard Corves)....Pages 582-588
 Pigeon-Inspired Optimization for Node Location in Wireless Sensor Network  (Trong-The Nguyen, Jeng-Shyang Pan, Thi-Kien Dao, Tien-Wen Sung, Truong-Giang Ngo)....Pages 589-598
 Pneumatically-Driven Micropump Using Active Check-Valve for Liquid Transportation  (Gia Thinh Bui, Nhu-Tung Nguyen, Jr-Lung Lin)....Pages 599-606
 Prediction of Surface Roughness in Turning with Diamond Insert  (Do Duc Trung, Nguyen Nhu Tung, Nguyen Hong Son, Tran Thi Hong, Nguyen Van Cuong, Vu Nhu Nguyet et al.)....Pages 607-612
 Research on Determining the Limited Roll Angle of Vehicle  (Anh Nguyen Tuan, Binh Hoang Thang)....Pages 613-619
 Research on Dynamic Modelling for Hydraulic Power Automotive Steering Systems with Nonlinear Friction  (Nguyen Xuan Tuan, Huyen T. Dinh, Nguyen Van Bang)....Pages 620-627
 Robust Model Predictive Control Based Kinematic Controller for Nonholonomic Wheeled Mobile Robotic Systems  (Dao Phuong Nam, Nguyen Hong Quang, Dao Cu Hung Phi, Tran Nam Anh, Dinh Lam Bao)....Pages 628-635
 Scanning Noise Evaluation Based on 3D Mesh Model  (Nguyen Duy Minh Phan)....Pages 636-641
 Simulation Vibration in the Automotive Powertrain  (Thanh Quang Nguyen)....Pages 642-647
 Sliding Mode Control for a Pneumatic Servo System with Friction Compensation  (Xuan Bo Tran, Van Lai Nguyen, Nam Chung Nguyen, Duc Thinh Pham, Van Lanh Phan)....Pages 648-656
 Smooth and Time Optimal Trajectory Planning for Industrial Robot Using a Single Polynomial  (Minh-Tuan Nguyen, Jin-Huang Huang)....Pages 657-663
 State of Charge Estimation for Lithium-Ion Battery Using Sigma-Point Kalman Filters Based on the Second Order Equivalent Circuit Model  (Nguyen Vinh Thuy, Nguyen Van Chi)....Pages 664-678
 Strain Effect on Hysteresis Loop of PbTiO3 Bulk  (Do Van Truong, Tran The Quang, Nguyen Hoang Linh, Nguyen Van Hoi, Vuong Van Thanh)....Pages 679-685
 Studying an Active Anti-roll Bar Control System for Tractor-Semi Trailer Vehicles  (Van Tan Vu, Duc Tien Bui)....Pages 686-692
 Studying Effect of Adding Buffer Gases to TRIES Gas on the Electron Transport Coefficients  (Pham Xuan Hien, Phan Thi Tuoi, Tang Cam Nhung, Do Anh Tuan)....Pages 693-703
 Taguchi Based Process Parameters Optimization in Vibration Assisted Die Sinking Electrical Discharge Machining  (Huu Phan Nguyen, Tien Long Banh, T. Muthuramalingam, Ngoc Pi Vu, Quang Dung Le, Le Xuan Hung et al.)....Pages 704-709
 The Research and Calculation for the Selection of Motor and Battery for Five Seat Passenger Car When Replacing Engine by an Electric Motor  (Nguyen Huy Truong)....Pages 710-719
 Vibroacoustic Response of a Finite Simply Supported Double-Composite Plate Filled with an Air Cavity  (Pham Ngoc Thanh, Tran Ich Thinh)....Pages 720-732
Back Matter ....Pages 733-735