Advances in Design, Simulation and Manufacturing IV Proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-202, June 8–, 202, Lviv, Ukraine – Volume : Manufacturing and Materials Engineering 978303077780, 978303077797

Preface
Organization
	Steering Committee
	General Chair
	Co-chair
	Members
	Program Committee
	Invited External Reviewers
	DSMIE Team
Contents
Product Design and Manufacturing Processes
Ensuring the Technological Parameters of Cast Block Crankcase of Automobile’s Diesel Engine
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
The Contact Pressure in Drawing Parts Without Clamping the Workpiece Flange
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Complex Recognition Approach for Cutting Part of Cutters in Finishing Turning
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Fractal Analysis of Structural and Phase Changes in the Metal of Welded Steam Pipe Joints
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Research of the Spindle Units for Multioperational Lathes in the APM WinMachine Environment
	1 Introduction
	2 Literature Review
	3 Research Methodology
		3.1 Determination of the Spindle-Tooling Structure Stiffness
		3.2 Finding the Optimal Ratio of Spindle and Cantilever Sizes
	4 Result
	5 Conclusion
	References
Technological Inheritability of Product Material Using the Criterion of Technological Damageability
	1 Introduction
	2 Literature Review
	3 Research Methodology
		3.1 Methods of Research
		3.2 Experimental Researches Planning
	4 Results
	5 Conclusions
	References
Wear Characteristics of Carbon and Tool Steels Hardened by Combined Laser-Ultrasonic Surface Treatment
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
		4.1 Surface Roughness
		4.2 Surface Hardness
		4.3 Wear
	5 Conclusions
	References
Rational Design Solution Based on Mathematical Modeling of an Interference Fit
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
		4.1 Conditions for Ensuring Strength and Existence of Fits Depending on Geometric Parameters in Integrated Modeling
		4.2 Mathematical Modeling of the Area of Existence of Fits Depending on Geometric Parameters Integrated Modeling
	5 Conclusions
	References
Design and Engineering Assurance for the Customized Implants Production Using Additive Technologies
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
		4.1 Engineering Support for Collecting Initial Information
		4.2 Formation of Virtual and Full-Scale Model of an Anatomical Object
		4.3 Surgical Planning Using Full-Scale Models of Anatomical Objects Made Using AT
		4.4 Design of a Customized Implant
		4.5 Regular and Stochastic Structures in Customized Implants
		4.6 Engineering Verification of the Customized Implant Design
		4.7 Choice Specifics and Application of Technologies
		4.8 Quality Control of Customized Implants
		4.9 Implementation of Engineering Support System in the Manufacture of Customized Implants of the Acetabular Component Based on Additive Technologies
	5 Conclusions
	References
The Dynamic Model of the Automatic Clamping Mechanism with a Rotating Input Link
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
The Optimal Conditions for Adding Strain to the Deformation Zone During the Expansion of Automobile Pipe Adapters
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Diamond Spark Grinding of Hard Alloys Using Solid Lubricants
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Technological Parameters of Hole Shaping in the Cones Rolling-Cutter Row of Roller Cone Bits
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Design Calculation of Automatic Rotary Motion Electrohydraulic Drive for Technological Equipment
	1 Introduction
	2 Literature Review
	3 Research Methodology
		3.1 Construction of the Settlement and Principal Scheme for Hydraulic Drive
		3.2 Choice of the Working Fluid and the Nominal Working Pressure
		3.3 Determination of the Working Volume and Choice of the Hydraulic Motor
		3.4 Choice the Pump
		3.5 Determination of the Parameters for Mathematical Model of Hydraulic Drive Power Unit
		3.6 Assessment of the Static Characteristics for Hydraulic Drive
		3.7 Synthesis of the Automatic Control System
	4 Results
	5 Conclusions
	References
Optimization of the Interelectrode Gap in Electrical Discharge Grinding with Changing Electrode Polarity
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Determination of Radial Displacement Coefficient for Designing of Thread Joint of Thin-Walled Shells
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Solutions for Industry 4.0
Investments in Blockchain Information Management Systems Based on Business Angels’ Criteria
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Agile Project Management Based on Data Analysis for Information Management Systems
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Optimization Work with a Digital Human Model
	1 Introduction
	2 Literature Review
		2.1 Ergonomic Analysis
		2.2 Software for Ergonomic Simulation
		2.3 Time Analysis
	3 Research Methodology
		3.1 Description of Analyzed Workplace
		3.2 Measurement of Current Workplace
		3.3 Outputs of Analyzes
	4 Results
	5 Conclusion
	References
The Implementation of Industry 4.0 Supported by Service Robots in Production Processes
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Intelligent Numerical Control of Profile Grinding
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Choice of Carrier Behavior Strategy According to Industry 4.0
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Autonomous Data-Driven Integration into ERP Systems
	1 Introduction
	2 Literature Review
	3 Research Methodology
		3.1 BPMN
		3.2 UML
		3.3 Integration
	4 Results
	5 Conclusions
	References
Three Dimensional Technology Radar Model to Evaluate Emerging Industry 4.0 Technologies
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
		4.1 Step 1 - Technology Identification
		4.2 Step 2 - Technology Selection
		4.3 Step 3 – Technology Assessment
		4.4 Step 4 – Technology Radar
		4.5 Step 5 – Technology Review
		4.6 Discussion and Limitations
	5 Conclusions
	References
Applicability of Traditional Project Closeout Approaches in Agile Developed IT Projects
	1 Introduction
	2 Literature Review
		2.1 Project Management Institute
		2.2 International Project Management Association
		2.3 CAMMP
	3 Research Methodology
		3.1 Development of Hypothesis Based on Literature Research
		3.2 Survey Structure
	4 Results
		4.1 Representability of Survey Participants
		4.2 Project Closeout Success and Satisfaction
		4.3 Need of Project Management Framework Adaption in Agile Developed IT Projects
		4.4 Limitations
	5 Conclusions
	References
Reliability of Road Transport Means as a Factor Affecting the Risk of Failure – The Transport Problem Case Study
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
An Intelligent Scheduling System Architecture for Manufacturing Systems Based on I4.0 Requirements
	1 Introduction
	2 Literature Review
		2.1 Integrated Networked Process Planning and Scheduling System
		2.2 Decision System for Setups Scheduling Based on Multivariate Data Analysis
		2.3 Hybrid System to Support Scheduling in Distributed Environments
		2.4 I4.0 Oriented Scheduling System Based on Dynamic Selection of Dispatching Rules and the Kano Model
		2.5 Hybrid Scheduling System Based on Multi-agents and Meta-heuristics
		2.6 Scheduling System Based on Self-organized Negotiation Mechanism and Collective Intelligence
		2.7 Road Anomaly Detection System
	3 Research Methodology
		3.1 Main I4.0 Oriented DSS Characteristics
		3.2 Proposed Architecture
	4 Results
		4.1 Validation of the Importance of the Main I4.0 Oriented Characteristics
		4.2 Comparative Analysis of the Proposed Architecture with Similar Ones
	5 Conclusion
	References
A New Approach for the Evaluation of Internal Logistics Processes and Their Readiness for the Industry 4.0 Concept
	1 Introduction
	2 Literature Review
		2.1 Internal Logistics and Evaluation According to the Logistics Audit
		2.2 Models of Readiness for the Industry 4.0 Concept
		2.3 Findings
	3 Research Methodology
		3.1 Description of Methodology and Its Main Parameters
		3.2 Determining Readiness Levels
		3.3 Determination of Dimensions and Subdimensions
		3.4 System of Evaluation and Determination of the Level of Internal Logistics
	4 Results
	5 Conclusions
	References
ICT for Engineering Education
Mobile Application for Test Control of Knowledge Among Mechanical Engineering Students
	1 Introduction
	2 Literature Review
		2.1 Technologies for the Application of Mobile Devices in the Educational Process
		2.2 Features of Mobile Devices Use in the Classes of the Engineering Disciplines
	3 Research Methodology
	4 Results
		4.1 Application Interface
		4.2 Carrying Out the Test Control
	5 Conclusions
	References
Institutional Aspects of Integrated Quality Assurance of Engineering Study Programs at HEI Using ICT
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
An Android Application for Explaining Form Deviations Using 3D Models
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
In-campus Way of the Insight Transfer Technology
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusion
	References
Information and Communication Technology Tools for Enhancing Engineering Students’ Creativity
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Numerical Simulation and Experimental Studies
Development of Optimum Thin-Walled Parts Milling Parameters Calculation Technique
	1 Introduction
	2 Literature Review
	3 Research Methodology
		3.1 Model of Thin-Walled Part Deflection
		3.2 Finite Element Machining Analysis
	4 Results
		4.1 Algorithmic Representation of the Developed Solution
		4.2 Development and General Interface of the Calculation Program
	5 Conclusion
	References
Measurement of Contact Pressure for Conical Honing
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusion
	References
Simulation Methodology of Diamond Burnishing
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
		4.1 Results of Diamond Burnishing Simulation
		4.2 Results of Ultrasonic Diamond Burnishing Simulation
	5 Conclusions
	References
Optimal Milling Conditions for Complex Shaped Thin-Walled Components
	1 Introduction
	2 Literature Review
	3 Research Methodology
		3.1 Experimental Setup
		3.2 Theoretical Explanation, Initial Experiments
	4 Results
	5 Conclusions
	References
Study of Dynamic and Power Parameters of the Screw Workpieces with a Curved Profile Turning
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Effect of Abrasive Finishing on the Electrical Parameters of S-B and Rectangular Waveguides
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Prediction the Durability of Hobs Based on Contact and Friction Analysis on the Faces for Cutting Teeth and Edges During Hobbing
	1 Introduction
	2 Literature Review
	3 Research Methodology
		3.1 Methods for Determining the Actual Geometric Parameters of the Hob Cutter and Their Effect on Contact Loading and Friction
		3.2 Method of Calculating the Friction Load on the Rake Face of the Hob’s Teeth, Taking into Account the Kinematic Angles
	4 Results
	5 Conclusions
	References
Modelling of the Effect of Slide Burnishing on the Surface Roughness of 42CrMo4 Steel Shafts
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Analytical Modelling of Crack Formation Potential in Thermomechanical Processing of Materials
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
The Influence of Grinding Modes on the Quality of the Surface Layer
	1 Introduction
	2 Literature Review
		2.1 Structure of Investigation of Energy-Power Parameters of Machining Processes
	3 Research Methodology
	4 Results
		4.1 Investigation of Power-Strength Parameters of Grinding Process
		4.2 Recommendations for Technological Modes of Processing Appointment
	5 Conclusions
	References
Improvement of the Gear Shaping Effectiveness for Bimetal Gears of Internal Gearing with a Friction Coating
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Penetration Depth of the Critical Temperature into the Workpiece Material During Grinding
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Justification of Technological Possibilities for Reducing Surface Roughness During Abrasive Processing
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Geometric Modeling of Lathe Cutters for Turning High-Precision Stainless Steel Tapered Threads
	1 Introduction
	2 Literature Review
		2.1 The Geometry of a Regular Threading Tool
	3 Research Methodology
	4 Results
		4.1 The Cutter-Model with Back Rake Angle 12°
	5 Conclusions
	References
Interaction of Flexural and Torsional Shapes Vibrations in Fine Boring with Cantilever Boring Bars
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusion
	References
Heat Flows Affected on the Wheelhead of a Cylindrical Grinding Machine
	1 Introduction
	2 Literature Review
	3 Research Methodology
		3.1 The Balance Equation of Heat Flows Acting on the Grinding Wheelhead
		3.2 Determination of Heat Quantity Released in the Spindle Bearings
		3.3 Determination of Heat Quantity Released in the Guide Ways
		3.4 Determination of Heat Quantity Released by the Airflow, Removed by the Ventilation System of the Grinding Wheel Drive Electric Motor
		3.5 Determination of Heat Quantity Released by the Airflow from the Ventilation Effect from the Rotating Grinding Wheel
	4 Results
	5 Conclusions
	References
Simulation Research of Machining-Induced Surface Layer Operational Characteristics
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
An Experimental and Statistical Investigation on Cutting Forces in Turning of AISI 304 Stainless Steel Under Dry, MQL and Nanofluid MQL Conditions
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Advanced Materials
Strengthening of the NKV Type Centrifugal Pump’s Shaft by Chemical-Thermocycling Treatment
	1 Introduction
		1.1 Purpose and Operating Conditions of the Shaft of Centrifugal Pump
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
The Influence of Synthesis Modes on Operational Properties of Oxide Ceramic Coatings on Aluminum Alloys
	1 Introduction
	2 Literature Review
	3 Researches Methodology
	4 Results
	5 Conclusions
	References
Optimal Design of Composite Shelled Sandwich Structures with a Honeycomb Filler
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Preparation and Characterization of a Biocomposite Based on Casein and Cellulose
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Advanced Technologies of Manufacturing Readily Removable Cores for Obtaining High-Quality Castings
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
The Use of Ion Bombardment Modeling as a Component of the Structural Engineering of Nanoperiodic Composite Structures
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
		4.1 Modeling of Processes and Structural-Phase State of Nanocomposites of the TiN/MoN System
		4.2 Modeling of Implantation Processes, Structure, and Properties of MoN/(TiZrAlVNbCr)N Composites
	5 Conclusions
	References
Powder Technology and Software Tools for Microstructure Control of AlCu2 Samples
	1 Introduction
	2 Literature Review
	3 Researches Methodology
	4 Results
		4.1 Formation of Structurally Inhomogeneous Materials
	5 Conclusions
	References
Rational Choice of a Material for Orthopedic Insoles Based on the Mechanical Characteristics and Practical Application Purposes
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Structure and Properties of Surface Bandage Shelves for the Gas Turbine Engine’s Blades
	1 Introduction
	2 Literature Review
	3 Research Methodology
	4 Results
	5 Conclusions
	References
Author Index