Advances in Cryogenic Engineering Materials : Volume 46, Part A

Front Matter....Pages i-xxiv
High Voltage in Superconducting Power Equipment — Prospects and Limits....Pages 1-20
Conditions for Increasing Low Temperature Plasticity of Fe-Cr-Ni Alloys During Martensite Transformation....Pages 21-28
Dependence of the Temperature of the Martensitic Transformation Onset upon the Yield Strength of Austenite....Pages 29-32
Local Fracture Toughness Evaluation of 316LN Plate at Cryogenic Temperature....Pages 33-40
Finite Element Analysis and Notch Tensile Testing for Determining The Cryogenic Fracture Toughness of Structural Alloys....Pages 41-48
Fatigue Properties of Weld Joints of Stainless Steels and Aluminum Alloy at Cryogenic Temperatures....Pages 49-56
Hydrogen Effects on 22-13-5 Austenitic Steel at Low Temperatures....Pages 57-63
Prestressing Concepts and Related Materials Qualifications for The ATLAS Barrel Toroid Coil....Pages 65-72
Mechanical Properties of a Boron Added Superalloy at 4K and Magnetic Effect....Pages 73-80
Fracture and Tensile Properties of Boron Added Ni-Base Superalloy at 7 and 4.2 K, and the Effect of 13 Tesla Field....Pages 81-88
New Cryogenic Processing for the Development of High Strength Copper Wire for Magnet Applications....Pages 89-96
Temperature Dependence of Unstable Plastic Flow and Multi-Necking in ELI Ti-5Al-2.5Sn Alloy....Pages 97-103
Superlight Alloy Al-Cu-Li-Low Temperature (293-20K) Mechanical Properties and Fracture Mechanisms....Pages 105-111
Super Light Alloy Al-Cu-Li-Fatigue Crack Growth Resistance at Temperatures 293 and 77K....Pages 113-118
Influence of Sliding Directions on Frictional Properties of GFRPs and DFRPs....Pages 119-126
Frictional Properties on Surfaces of High Strength Polymer Fiber Reinforced Plastics....Pages 127-133
Mechanical Strength, Swelling and Weight Loss of Inorganic Fusion Magnet Insulation Systems Following Reactor Irradiation....Pages 135-141
Insulation Systems for NB 3 SN Accelerator Magnet Coils Fabricated by the “Wind and React” Technique....Pages 143-150
Mechanical and Thermal Properties of Unreinforced and Reinforced Polyphenylenes at Cryogenic Temperatures....Pages 151-157
Fracture of Fiber-Metal Laminate GLARE 2....Pages 159-166
Cryomechanics and Short-Beam Interlaminar Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates....Pages 167-174
Reactor Irradiation Effects on the Fatigue Behavior of CTD-112P at 77 K in Tension and Interlaminar Shear....Pages 175-180
Influence of the Test Geometry on the Fatigue Behavior of Fiber Reinforced Plastics in Tension and Interlaminar Shear at RT and 77 K....Pages 181-187
Viscoelastic Behaviour of Unidirectional Fibre Composites at Low Temperatures....Pages 189-196
Radiation Resistant Epoxy for Resin Transfer Molding Fabrication of Cryogenic Electrical Insulation....Pages 197-204
Study of Bisphenol-F Epoxy Resin System for Impregnation of Superconducting Magnets....Pages 205-210
Swelling and Elastic Moduli of Irradiated Resin Systems....Pages 211-218
Tribological Properties of Resins at Cryogenic Temperatures....Pages 219-226
Development of a New Resin System for the U.S. ITER Central Solenoid Model Coil....Pages 227-234
The Work of Fracture of Epoxide Resins at Temperatures to 4K....Pages 235-242
Low Temperature Adhesive Bond Strength of Electrical Insulation Films....Pages 243-250
Low-Temperature Deformation and Fracture Behaviour of Epoxide Resins....Pages 251-257
Microstructure and Toughening of Ce-TZP Ceramics at Low Temperatures....Pages 259-266
Wrappable Ceramic Insulation for Superconducting Magnets....Pages 267-273
Cryogenic Behavior of Piezoelectric Bimorph Actuators....Pages 275-282
Heat Flow Measurements on LHC Components....Pages 283-290
MgO-ZrO 2 Insulation Coatings on Ag/AgMg Sheathed Bi-2212 Superconducting Tapes By Sol-Gel Technique....Pages 291-296
Surface Flashover of Fiberglass Reinforced Epoxy Composite Insulation in Vacuum at Liquid Nitrogen and Room Temperatures using Power Frequency AC and Lightning Impulse Waveforms....Pages 297-304
Development of High Performance Composite for Cryogenic use....Pages 305-311
Thermal Conductivity of 34-700 Carbon Fiber Composites at Cryogenic Temperatures....Pages 313-320
Measurement of The Thermal Properties of Epoxied Titanium Contacts at Cryogenic Temperatures....Pages 321-328
Thermal Expansion of Ultra High Strength Fiber and its Fiber Reinforced Plastics....Pages 329-336
Measurements of Thermal Expansion of Nonmetallic Materials at Low Temperature using ESPI....Pages 337-344
The Effect of Nanostructure on the Thermal Behavior of Aerogels....Pages 345-352
Change of Thermal Conductivity of Ti-20V and Ti-15V-3Cr-3Sn-3Al Alloys Below Room Temperature with Isochronal Aging....Pages 353-360
Radiation Stable, Low Viscosity Impregnating Resin Systems for Cryogenic Applications....Pages 361-368
Heat Treatment Effects on the Surface of Insulation Material....Pages 369-374
Expected Lifetime of By-Pass Diodes for the LHC Magnet Protection Subjected to Liquid Helium Temperatures and Irradiation....Pages 375-382
Magnetostriction of Polycrystalline Tb-Dy Alloys at Cryogenic Temperatures....Pages 383-389
Adiabatic Processes in Magnetic Materials....Pages 391-395
Magnetocaloric Effect in GdAl 2 and Nd 2 Fe 17 ....Pages 397-404
Magnetothermal Properties of Dy 5 (Si x Ge 1−x ) 4 Alloys....Pages 405-412
The Order-to-Order Magnetic Phase Transitions in Concentrated Alloys Gd-Y: The Curious Irreversibility....Pages 413-420
Magnetic Regenerator Materials for Sub-2 K Refrigeration....Pages 421-426
Results of VAMAS Activities on Pre-Standardization of Mechanical Properties Evaluation at 4K....Pages 427-434
Determination of the Refractive Index and Thickness of a Transparent Film on Opaque Substrate Via Cryogenic Spectrometric Ellipsometry....Pages 435-442
Status of European Material Testing Program for ITER Model Coils and Full Size Mockups....Pages 443-450
Cryogenic and Aero-Space Structure Materials....Pages 451-458