6th International Conference on Nanotechnologies and Biomedical Engineering: Proceedings of ICNBME-2023, September 20–23, 2023, Chisinau, Moldova - ... in Medicine (IFMBE Proceedings, 91)

Preface
Organization
Plenary Speakers, Abstracts
	Genes, Cells and Discovery in Basic Science and Disease
	Tetrapods and Aeromaterials for Antiviral and Antibacterial Treatment and Therapy
	Single-Crystal Diamond Radiation Detector
	Strategic Integration of Electrospinning and Additive Processing for Smart and Sustainable Nanostructures
	Superconducting Order Parameter in Inhomogeneous Superconductors
	Rehabilitation Using a Data Glove for Moving the Paralyzed Fingers
	Importance of Training Healthcare Professionals in Medical Technology
	Nanocomposites and Polymer Thin Films: From Gas Phase Synthesis to Functional Applications
	3D Nanoarchitectures—A Novel Class of Materials: Perspective for Sustainable Development
	Engineering Heterostructured Nanomaterials for Nanoelectronic and Biomedical Applications
	Brain-Like Artificial Neural Network Based on Superconducting Neurons and Synapses
	Evaluation of Health Technology in Republic Moldova
	New Areas of Research and Applications for GaN
	Manifestations of Unconventional Pairing Symmetry in Superconducting Hybrids
	Perspective of Electronics at Atomic Scale—2D SnS—A Ferroelectric for Low-Power Applications
	Contents
Nanotechnologies and Nanomaterials
Properties of Vacuum-Evaporated CH3NH3PbCl3−xIx Perovskite Layers
	1 Introduction
	2 Experimental Details
	3 Results and Discussion
	4 Conclusions
	References
Functional Capabilities of Two-Barrier Semiconductor Structures
	1 Introduction
	2 Two-Barrier Structures
		2.1 Cadmium Telluride-Based Structure
		2.2 Silicon-Based Structure
	3 Functional Capabilities of Two-Barrier Cadmium Telluride-Based Structures
		3.1 The Injection Amplification of the Photocurrent
		3.2 Mechanism of the Photosensitivity of Diodes at Forward Bias
		3.3 Possibility of the Creation of Injection Detectors of Ionizing Radiation
		3.4 Mechanism of Free Carrier Generation When Irradiated by High Energy Photons
		3.5 Characteristics and Parameters Under X-ray Irradiation
	4 Functional Capabilities of Two-Barrier Silicon-Based Structures
		4.1 High Photosensitivity of Photodetectors
		4.2 Mechanism of High Photosensitivity
	5 Conclusions
	References
Gamma Radiation Sensitization of ZnO/Al2O3 Sensors Based on Nanoheterostructures
	1 Introduction
	2 Experimental Section
		2.1 Technology of ZnO/Al2O3 Heterostructures
		2.2 Irradiation Process
	3 Results and Discussion
	4 Conclusions
	References
Electrical Properties of the (Copper, Dysprosium)-Containing Complex Compound
	1 Introduction
	2 Methods
	3 Results of an Experimental Study
	4 Conclusions
	References
Morphological and Sensing Properties of the ZnO-Zn2SnO4 Ternary Phase Nanorod Arrays
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
		3.1 SEM and EDX Characterization
		3.2 XPS Results
		3.3 XRD Characterization
		3.4 Raman Characterization
		3.5 Gas Sensing Properties of the Sn-Doped ZnO-Zn2SnO4 Nanorod Arrays and Nanostructures
	4 Conclusions
	References
Characterization of Films Prepared by Aerosol Spray Deposition in the (MgO)x(In2O3)(1−x) System
	1 Introduction
	2 (MgO)x(In2O3)(1−x) Films Preparation
	3 Study of Morphological and Chemical Composition
	4 Study of X-ray Diffraction Pattern
	5 Study of Photosensitivity of Films
	6 Conclusions
	References
Nanocomposite Films Based on Photosensitive Azopolymer with Gold Nanoparticles: Synthesis, Film Deposition, Diffractive Optical Elements Recording and Characterization
	1 Introduction
	2 Materials and Methods
		2.1 Azopolymer Synthesis and Thin Film of Nanocomposites Based on Azopolymer with Au NPs Preparation
		2.2 Transmittance
		2.3 Grating Recording Process with Polarization Holography
	3 Results and Discussion
	4 Conclusions
	References
MOF-Coated 3D-Printed ZnO Tetrapods as a Two-in-One Sensor for H2 Sensing and UV Detection
	1 Introduction
	2 Materials and Methods
		2.1 Synthesis and Characterization
	3 Results and Discussion
		3.1 SEM Characterization
		3.2 XRD Characterization of t-ZnO@ZIF-8
		3.3 Sensing Properties of MOF-Coated 3D-Printed ZnO Tetrapods
	4 Conclusions
	References
A Nanosized Heteronuclear {Fe18Tb6} Coordination Wheel Based on Pivalate and Triethanolamine Ligands
	1 Introduction
	2 Experimental Section
		2.1 Materials and Instruments
		2.2 Synthesis of [Fe18Tb6(piv)12(Htea)18(tea)6(N3)6]·n(Solvent) (1)
		2.3 X-ray Crystallographic Analysis
	3 Results and Discussions
	4 Conclusions
	References
Organic Nanostructured Crystals for Thermoelectric Cooling in Medical Applications
	1 Introduction
	2 Crystals of TTT2I3 and TTT(TCNQ)2
	3 Charge Transport in TTT2I3 and TTT(TCNQ)2 Crystals
	4 A Thermoelectric Module made of TTT2I3 and TTT(TCNQ)2 Crystals
	5 Conclusions
	References
General Nature of Serration Effect in Crystals and Other Materials Under Indentation
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Conclusions
	References
Trends in Evolution of the Energy Band Structure of Chalcopyrite CuBIIIXVI2 Compounds with Variation of the B and X Compositions
	1 Introduction
	2 Methods and Materials
	3 Results
	4 Discussions
	5 Conclusions
	References
Optical and Photoelectric Properties of Cadmium Diarsenide and Surface-Barrier Structures Based on It
	1 Introduction
	2 General Results
	3 Conclusions
	References
Preliminary Study on Silver Nanoparticle Synthesis Through Chemical and Biological Methods
	1 Introduction
	2 Experimental
		2.1 Materials
		2.2 Synthesis
		2.3 Investigation Methods
	3 Results and Discussion
		3.1 AgNPs Synthesized by Chemical Method
		3.2 AgNPs Resulted from Biological Method
	4 Conclusions
	References
Advanced Nanotechnology-Based Approaches to Waste Water Purification from Organic Pollutants
	1 Introduction
	2 Experimental
		2.1 Materials and Methods
		2.2 Characterization of Adsorption-Structural Properties and Crystal Structure of NTD Samples
		2.3 Photocatalytic Activity of NTD
		2.4 Phenol Adsorption on NTD
		2.5 Photodegradation of Phenol by the NTD Photocatalyst Under UV Irradiation
	3 Conclusions
	References
Micro-Raman Analysis of Some As-S-S-Te Nanostructured Semiconductors
	1 Intorduction
	2 Expiremental
	3 Results and Discussion
	4 Conclusions
	References
Optical Properties and Photoinduced Anisotropy of PEPC-co-SY3 Nanocomposite
	1 Introduction
	2 Material and Methods
		2.1 Thin Film Preparation and Thickness Measure
		2.2 Spectroscopic and Polarimetric Analysis of Samples
	3 Results and Discussions
		3.1 UV/Vis Spectroscopy
		3.2 Polarimetry
	4 Conclusions
	References
Ground and Excited States of Excitons in GaSe Single Crystals
	1 Introduction
	2 Methods and Materials
	3 Results and Discussions
	4 Conclusions
	References
New Characteristics of Blue Self-pulsating InGaN Lasers
	1 Intorduction
	2 Laser Structure and Equations
	3 Results and Discussion
	4 Conclusions
	References
Parametric Anomaly of the Phonon Spectrum of a Thin Free-Standing Membrane
	1 Intorduction
	2 A Parametric Anomaly of the Single Layer Spectrum
	3 Conclusions
	References
Photoluminescence and Cathodoluminescence of Layered ZnIn2S4 and Zn2In2S5 Compounds Thermally Processed in Sulfur Vapor and Vacuum
	1 Introduction
	2 Experimental Method
	3 Experimental Results
	4 Conclusions
	References
ZnO Microtetrapods Covered by Au Nanodots as a Platform for the Preparation of Complex Micro-nano-structures
	1 Introduction
	2 Methods and Materials
	3 Results and Discussions
		3.1 Morphology Investigation of the As-Grown ZnO Tetrapods
		3.2 Photoluminescence Study of the As-Grown ZnO Tetrapods
		3.3 Estimation of the Electrical Conductivity of ZnO Tetrapods via Electrochemical Deposition
	4 Conclusions
	References
Synthesis Technology for CdSe/CdTe Heterojunctions and Characterization of Their Photoelectric Properties
	1 Introduction
	2 Experimental
	3 Experimental Results
	4 Conclusions
	References
Illumination-Dependent Photovoltaic Parameters of CdS/ZnTe Solar Cells
	1 Introduction
	2 Experimental Details
	3 Results and Discussion
		3.1 The Correlation Between Technological Regime and Photovoltaic Parameters of the Solar Cells
		3.2 The Influence of the Back Contact on the Short Current Density and Open Circuit Voltage
		3.3 Influence of the ZnTe Deposition Time on the Photovoltaic Parameter
		3.4 The Influence of the Illumination on the Photovoltaic Parameters
	4 Conclusions
	References
Fine Dispersion and Intensification of Heat Transfer at Boiling in Electric Field on the Modified Surfaces
	1 Introduction
	2 Methodical Support of the Experiment
	3 Results and Discussion
	4 Conclusions
	References
Photodetector Based on β-Ga2O3 Nanowires on GaSxSe1-X Solid Solution Substrate
	1 Introduction
	2 Experiment Methodology and Sample Preparation
	3 Experimental Results and Discussion
		3.1 Crystal Structure
		3.2 Microscopic Studies
		3.3 Elemental Composition
		3.4 Raman Spectroscopy
		3.5 Photoresponsive Properties
	4 Conclusions
	References
Aero-Materials Based on Wide-Band-Gap Semiconductor Compounds for Multifunctional Applications: A Review
	1 Introduction
	2 Liquid Marbles
		2.1 Aero-GaN Self-Assembled Liquid Marbles
		2.2 Aero-GaN Self-Propelled Liquid Marbles
	3 Wide-Bandgap Semiconductor Aero-Nanomaterials
	4 Conclusions
	References
Technological Features of Creating Hole Structures on the Base of MoS2 and the Electrochemical Behavior of MXene/Holey MoS2 Hybrids in Oxygen Reduction Reactions
	1 Introduction
	2 Materials and Methods
		2.1 Chemicals
		2.2 Synthesis of Layered MoS2 and Holey MoS2
		2.3 Synthesis of V-MXene
		2.4 Characterization of the Catalysts
	3 Results and Discussions
	4 Conclusions
	References
The Water-Soluble Zinc Phthalocyanine Substituted with Sulfur-Containing Groups
	1 Introduction
	2 Experimental Details
		2.1 Synthesis of Substituted Zinc Phthalocyanines
		2.2 Materials and Methods
	3 Results and Discussions
		3.1 UV-Vis and Fluorescence Analysis
		3.2 Triplet Lifetimes and Quantum Yields
	4 Conclusions
	References
Effect of Particle Size and Roughness on Contact Angle of ZnTe Thin Films
	1 Introduction
	2 Experimental Details
	3 Results and Discussions
		3.1 X-Ray Diffraction Analysis
		3.2 Particle Size and Contact Angle
		3.3 The Relation Between Roughness and Contact Angle
	4 Conclusions
	References
Patterning Nanoelectronic Devices Using Field Emission Scanning Electron Microscope
	1 Introduction
	2 Nano-fabrication of Nanotransistors on 2D Materials
	3 Conclusions
	References
Controlling Hydrophobic/Hydrophilic Properties of ZnO Microtetrapods Structures by Means of Thermal Treatment
	1 Introduction
	2 Methods and Materials
	3 Results and Discussions
		3.1 Morphology Study of the ZnO Microtetrapods
		3.2 XRD Measurements
		3.3 Photoluminescence Study
		3.4 Contact Angle Measurements
	4 Conclusions
	References
Quantum Oscillations in Topological Insulator Bi2Te2Se Microwires Contacted with Superconducting In2Bi Leads
	1 Introduction
	2 Samples and Experimental Details
	3 Results and Discussions
	4 Conclusions
	References
Biomaterials for Medical Applications
Design and Simulation of a Biocompatible Prosthesis Ti-15Mo-XTa Alloy: An Analysis of Mechanical Integrity Using Finite Element Modeling
	1 Introduction
	2 Experimental
	3 Result and Discussion
	4 Conclusions
	References
Modification of Acrylic Paint by Acetamide to Be Antibacterial Used for Medical Applications
	1 Introduction
	2 Materials and Method
		2.1 Materials
		2.2 Preparation of Bacterial Suspension
		2.3 Preparation of Acetamide for Minimum Inhibitory Concentration (MIC)
		2.4 Preparation of Acrylic/Acetamide Solutions for Agar Well Diffusion Method
		2.5 Determination the Antimicrobial Activity of Acetamide by MIC Method
		2.6 Determination the Antimicrobial Activity of Acrylic/Acetamide by Well Diffusion
	3 Result and Discussion
		3.1 Minimum Inhibitory Concentration (MIC) of Acetamide
		3.2 Agar Well Diffusion Method for Acrylic/Acetamide Composites
		3.3 Fourier Transforms Infrared (FTIR) Spectroscopy
		3.4 Swelling Studies
		3.5 Wettability
		3.6 Tensile Test and Young Modulus.
	4 Conclusions
	References
Interaction Between Thin Layers of Polysaccharides Studied by Quartz Crystal Microbalance with Dissipation (QCM-D)
	1 Introduction
	2 Experimental Section
		2.1 Materials
		2.2 Pullulan Oxidation
		2.3 Sensors Cleaning, Preparation of Cellulose Films and Adsorption Studies
		2.4 NMR Determinations
		2.5 QCM-D Measurements
	3 Results and Discussion
	4 Conclusions
	References
The Critical Size Bone Defects - In-Vivo Experimental Method of the Treatment with the Decellularized Vascularized Bone Allografts
	1 Introduction
	2 Methods
		2.1 General Aspects
		2.2 Operative Procedure
		2.3 Statistical Methods
	3 Results
	4 Discussions
	5 Conclusions
	References
Antigenic and Biodegradable Characteristics of the Extracellular Matrices from the Pig Dermis
	1 Introduction
	2 Materials and Methods
		2.1 Skin Preparation
		2.2 Separation Method
		2.3 Decellularization Method
		2.4 Morphological Assessment
		2.5 Spectrophotometric Method
		2.6 In Vitro Degradation of Dermal Grafts
		2.7 Water Absorption Test
		2.8 Scanning Electron Microscopy (SEM)
	3 Results and Discussions
		3.1 Histological and Antigenic Analysis
		3.2 In Vitro Degradation of the Dermal Grafts
		3.3 Water Absorption Test
		3.4 Scanning Electron Microscopy
	4 Conclusions
	References
Effectiveness of Tissue Engineering in Obtaining the Extracellular Composite Vascularized Bone Matrix
	1 Introduction
	2 Material and Methods
	3 Results
	4 Discussions
	5 Conclusions
	References
Effect of Gold Nanoparticles Functionalized by Arthrospira Platensis on Rats
	1 Introduction
	2 Materials and Methods
		2.1 Nanoparticles
		2.2 Cyanobacterial Strain
		2.3 Functionalization of AuNPs with Arthrospira platensis Biomass
		2.4 Experimental Design
		2.5 Quantitative Analysis of Gold Content in Animal Tissues
		2.6 Blood Hematology and Biochemistry
	3 Results
		3.1 Accumulation of AuNPs in Animal Organs Following Administration of AuNPs and After a Period of Clearance
		3.2 Change of Hematological Parameters in Animals Administrated with AuNPs
		3.3 Change of Biochemical Parameters in Animals Administrated with AuNPs
		3.4 The Efficiency of the Clearance Period for Normalization of Hematological and Biochemical Indicators
	4 Discussion
	5 Conclusions
	References
The Significance of Computed Tomography in Diagnosing Pediatric Tuberculosis
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Mechanical Characterization of Decellularized Blood Vessels: A Valuable Tool to Provide Comprehensive Information About the Scaffold
	1 Introduction
	2 Material and Methods
		2.1 Tissue Harvesting and Preparation
		2.2 Decellularization
		2.3 Mechanical Testing. Suture Retention Strength
		2.4 Statistical Analysis
	3 Results
		3.1 Decellularization Efficiency
		3.2 Analysis of Scaffold Biomechanical Properties
	4 Discussions
	5 Conclusions
	References
Comparative Assessment of In Vitro Effects on the Human Lymphocytes in Tuberculosis Patients of the Zinc Oxide Nanoparticles Biofunctionalized by Sulfated Polysaccharides from Spirulina
	1 Introduction
	2 Materials and Methods
		2.1 Materials
		2.2 Experimental Design
		2.3 Blood Hematology and Biochemistry
		2.4 Statistical Analysis
	3 Results
		3.1 Assessment of the Demographics, Radiological and Laboratory Data of Pulmonary TB Patients
		3.2 Changes of Hematological Parameters Under the Influence of the ZnONPs SPS and SPS
		3.3 Changes of Biochemical Parameters Under the Influence of the ZnONPs SPS
	4 Discussion
	5 Conclusions
	References
Synthesis and Characterization of Self-assembled Hydrogels Based on Amphiphilic Derivates of Chitosan and Gelatin
	1 Introduction
	2 Materials and Methods
		2.1 Materials
		2.2 Methods
	3 Results and Discussions
		3.1 Synthesis of Self-assembled Hydrogels
		3.2 FTIR-ATR Spectrocopy
		3.3 Swelling Characteristics and Elastic Modulus
		3.4 In Vitro Cytotoxicity Study and Cell Morphology Evaluation
	4 Conclusions
	References
Ionic Crosslinked Biopolymer-Ceramic Beads for Bone Tissue Engineering
	1 Introduction
	2 Materials and Methods
		2.1 Materials
		2.2 Beads Preparation and Characterization
	3 Results and Discussions
	4 Conclusions
	References
Composites Based on Biopolymers and Ag Nanoparticles as Potential Wound Dressing Materials
	1 Introduction
	2 Materials and Methods
		2.1 Materials
		2.2 Nanoparticles Preparation and Characterization
		2.3 Scaffolds Preparation
		2.4 Scaffolds Characterization
	3 Results and Discussions
		3.1 Nanoparticles Preparation and Characteristics
	4 Conclusions
	References
Synthesis and Study of Dextran:Zinc Aminomethylphthalocyanine Copolymers for Medicinal Applications
	1 Introduction
	2 Experimental Details
		2.1 Synthesis of Substituted Zinc Phthalocyanines
		2.2 Materials and Methods
	3 Results and Discussion
		3.1 FTIR Analysis of ZnAMPc:Dextran Copolymers
		3.2 Optical Absorption of Mono-Aminomethyl ZnPc:Dextran Copolymers
	4 Conclusions
	References
Effects of Nickel, Molybdenum, and Cobalt Nanoparticles on Photosynthetic Pigments Content in Cyanobacterium Arthrospira Platensis
	1 Introduction
	2 Materials and Methods
		2.1 Nanoparticles
		2.2 Cyanobacterial Strain
		2.3 Experimental Procedures
		2.4 Analytical Methods
	3 Results
		3.1 Chlorophyl Content in Spirulina Biomass Grown in the Presence of Ni, Mo, and Co Nanoparticles
		3.2 Change of β-Carotene Content in Spirulina Biomass Under Spirulina Cultivation in the Presence of Ni, Mo, and Co Nanoparticles
		3.3 Change of Phycobiliprotein Content in Biomass Under Spirulina Cultivation in the Presence of Ni, Mo, and Co Nanoparticles
	4 Discussion
	5 Conclusions
	References
Preservation of Microorganisms of Biotechnological Interest Involving Fe2O3, Fe2ZnO4, and ZnO Nanoparticles
	1 Introduction
	2 Material and Methods
		2.1 Study Objects
		2.2 Lyophilization
		2.3 Rehydration of Lyophilized Cultures
		2.4 Determination of Antimicrobial Activity
	3 Results and Discussion
	4 Conclusions
	References
Clinical and Cost Effectiveness of Telerehabilitation System in Balance Disorder Patients
	1 Introduction
	2 Methods
		2.1 Study Design
		2.2 Clinical Evaluation
		2.3 Cost Effectiveness Analysis
		2.4 Statistical Analysis
	3 Results
		3.1 Clinical Effectiveness
		3.2 Cost Analysis
	4 Discussion
	5 Conclusions
	References
Innovation, Development, and Interdisciplinary Research
Design of the Hardware Subsystem of a Proposed Autonomous Drone
	1 Introduction
	2 Theoretical Considerations Regarding System Design
	3 Subsystem Assembly
	4 Conclusions
	References
Thyroid Hormones Interpretation in Children with Juvenile Idiopathic Arthritis
	1 Introduction
	2 Material and Methods
	3 Results and Discussions
	4 Conclusions
	References
Nanotechnology, Counterproliferation and Proliferation
	1 Introduction
	2 Nanoengineering and Counterproliferation
		2.1 Nanoengineering and Civil Security
		2.2 Nanoengineering and Military Security
	3 Nanoengineering and Proliferation
		3.1 Methods and Principles of Proliferation Contributions
		3.2 Nanotechnologies and Nuclear WMD
	4 Conclusions
	References
Nutritional Quality of Bread and Bakery Products
	1 Introduction
	2 Materials and Methods
		2.1 Selection of Food Products
		2.2 Selection of Nutrients
		2.3 The Evaluation
	3 Results and Discussion
		3.1 General Nutritional Characteristics of Bread and Bakery Products
		3.2 Nutritional Quality of Bread and Bakery Products According to Nutritional and Health Claims
		3.3 Discussions
	4 Conclusions
	References
The Recovery of Alpha-Lactalbumin at the Electroactivation of Whey
	1 Introduction
	2 Methods and Materials
	3 Results and Discussion
	4 Conclusions
	References
Influence of CYP2C19*2 Polymorphism on Clinical Outcomes in Moldova’s Patients Treated with Clopidogrel After Percutaneous Coronary Intervention
	1 Introduction
	2 Material and Methods
	3 Results
	4 Disscusion
	5 Conclusions
	References
Antibacterial Activity of “Green” Silver Nanoparticles (AgNPs) in Combination with Benzylpenicillin and Kanamycin
	1 Introduction
	2 Methods and Materials
		2.1 Biogenic Synthesis and Characterization of AgNPs
		2.2 Bacterial Strain, Cultivation Conditions and Determination of Growth
		2.3 Determination of Colony-Forming Activity by Serial Dilution
		2.4 Generating Growth Curves for Bacteria
		2.5 Statistical Analysis of Results
	3 Results
		3.1 The Effect of AgNPs and Complexes on the Growth of Escherichia coli K-12 by Disk Diffusion Method
		3.2 The Effect of Antibiotics, AgNPs and Their Complexes on the Growth of E. coli Colonies
		3.3 Effect of Silver Nanoparticles and Antibiotics on Bacterial Growth Kinetics
	4 Conclusion
	References
The Impact of Biogenic Silver Nanoparticles on the Enzymatic Antioxidant System of Wistar Rats’ Kidney
	1 Introduction
	2 Methods and Materials
		2.1 Biogenic NPs’ Synthesis and Determination of Their Physicochemical Parameters
		2.2 Experimental Procedures on Animals
		2.3 Determination of Superoxide Dismutase (SOD) Activity
		2.4 Malonic Dialdehyde (MDA) Content Determination
		2.5 Statistical Analysis
	3 Results
		3.1 Total Flavonoid Content and Antiradical Activity in O. araratum Extract
		3.2 HPLC Analysis of O. araratum Extract
		3.3 Green Synthesis of Silver Nanoparticles with Ocimum arartum Extract
		3.4 Effect of Biogenic NPs on the Antioxidant Enzymatic System of Kidney Tissue
		3.5 Study of Lipid Peroxidation Assessment Under the Action of Biogenic AgNPs
	4 Conclusion
	References
The Sentinel Surveillance System of Severe Acute Respiratory Infections Associated with Influenza in Children from Republic of Moldova
	1 Introduction
	2 Material and Methods
	3 Results
	4 Discussions
	5 Conclusions
	References
Neural Circuits-Adjusted Diagnostic Approach to Predict Recurrence of Atrial Fibrillation
	1 Introduction
		1.1 Atrial Fibrillation and Neuronal Circuits
		1.2 Aim of the Study
	2 Prediction of Atrial Fibrillation Recurrences by Pathologically Increased Central Heart Regulation, Visualized on Cardiorhythmograms
		2.1 Material and Methods
		2.2 Methods
		2.3 Results and Discussion
	3 Conclusions
	References
Combination Thermostated Vacuum Gauge
	1 Introduction
	2 Design Features and Specification of the Vacuum Gauge
	3 Conclusions
	References
Predicting Pain Scores Using Personality Trait Facets and Personality Trait Domains Assessed by Personality Inventory for DSM-5
	1 Introduction
	2 Material and Methods
	3 Results
		3.1 Model PAIN Facets 1 min
		3.2 Model PAIN Facets 2 min
		3.3 Model PAIN Facets 3 min
		3.4 Model PAIN Domains 1 min
		3.5 Model PAIN Domains 2 min
		3.6 Model PAIN Domains 3 min
	4 Conclusions
	References
Towards Improved Assistive Inertial Positioning Solutions by Using Finely Tuned Wavelet Functions
	1 Introduction
	2 Methodology
	3 Wavelet Fine-Tuning Method Basic Principle
	4 Experimental Testing of Navigator-Based Wavelet Denoising Improvement and Discussions
	5 Conclusions
	References
Correction to: Towards Improved Assistive Inertial Positioning Solutions by Using Finely Tuned Wavelet Functions
	Correction to: Chapter “Towards Improved Assistive Inertial Positioning Solutions by Using Finely Tuned Wavelet Functions” in: V. Sontea et al. (Eds.): 6th International Conference on Nanotechnologies and Biomedical Engineering, IFMBE Proceedings 91, https://doi.org/10.1007/978-3-031-42775-6_63
Author Index