5th International Conference on Nanotechnologies and Biomedical Engineering: Proceedings of ICNBME-2021, November 3-5, 2021, Chisinau, Moldova (IFMBE Proceedings, 87)

Preface
Organization
	Organizers
	In Collaboration with
	Sponsored by
	Committees
	Conference Chairs
	International Advisory Committee
	International Program Committee
	Organizing Committee
	Reviewers List
	Plenary Speakers, Abstracts
Applying the Negligible Mass of Graphene Aeromaterials: Repeatable Air Explosions and Instant Sterilization
	References
Terahertz Spectroscopy as an Effective Tool of Experimental Nanophysics
	References
Spin-Dependent Phenomena in Semiconductor Micro-and Nanoparticles for Biomedical Applications
	References
3D-Printed Sensors of Nanostructured Semiconducting Oxides
	References
Semiconductor and Plasmonic Nanoparticles for Biomedical Applications
	References
Clinical Engineering: Invaluable Contribution in Modern Hospital Management
Improving Lifestyle of Elderly Through Wearable Devices and IoMT
Understanding the Structure of Gels Using X-ray Scattering Methods
Surface Modifications of Biomedical Devices
Management of Medical Technologies for Ensuring the Safety, Efficiency, and Quality of Medical Services
	References
Contents
Nanotechnologies and Nanomaterials
Influence of Double Feedback on Stationary States of Quantum Dots Lasers
	1 Introduction
	2 Setup, Model and Equations
	3 Numerical Results and Discussions
	4 Conclusions
	References
Quantum Photon Conversion via Coherently Driven Permanent Dipole Systems
	1 Introduction
	2 Analytical Framework
	3 Results and Discussion
	4 Summary
	References
Electrical Characterization of Individual Boron Nitride Nanowall Structures
	1 Introduction
	2 Experimental Conditions
	3 Results and Discussions
	4 Conclusions
	References
Tunable Ferromagnetic Nanomaterials for 6G Technology: Fundamentals and Prospects
	1 Introduction
	2 Materials and Methods
		2.1 Synthesis and Characterization
		2.2 Terahertz-Infrared Spectroscopy
	3 Epsilon Iron Oxide
	4 M-Type Hexaferrites
		4.1 SrFe12O19Double Cation Substitution: (Ca and Al)
		4.2 SrFe12O19Single Cation Substitution: (Ga)
		4.3 (Ba/Pb)Fe12O19Single Crystals
	5 Conclusions
	References
Aerosol Spray Deposited Wurtzite ZnMgO Alloy Films with MgO Nanocrystalline Inclusions
	1 Introduction
	2 Thin Films Preparation of Zn1-XMgXO
	3 Study of Morphologycal Properties
	4 Study of Bandgap and X-ray Diffraction Pattern
	5 Conclusions
	References
Phase Transition in Laser Irradiated TiO2Thin Films
	1 Introduction
	2 Film Fabrication
	3 Results and Discussions
		3.1 Surface Morphology
		3.2 Structural Properties
	4 Conclusions
	References
Comparative Analysis of Iron Oxide Nanoparticle’s (Fe3O4) Cytotoxicity Synthesized by Chemical and Biogenic Methods
	1 Introduction
	2 Materials and Methods
		2.1 Plant Extracts Preparation
		2.2 Determination of Extracts Antiradical Activity
		2.3 Biogenic Synthesis of Iron Oxide NPs
		2.4 Chemical Synthesis of Iron Oxide NPs
		2.5 Iron Oxide NPs Antibacterial Properties
		2.6 Effect of Iron Oxide NPs on E. Coli Growth
		2.7 Samples Cytotoxic Activity Determination Using RBC Test
	3 Results and Discussion
	4 Conclusions
	References
Relaxation Parameters of Cu/substrate Type Coated Systems Under Nanoindentation
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Controlling the Degree of Hydrophilicity/Hydrophobicity of Semiconductor Surfaces via Porosification and Metal Deposition
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Conclusions
	References
Variation of Acoustic Properties with Material Parameters in Layered Nanocomposites
	1 Introduction
	2 The Secular Equation
	3 Spectral Lines in the Parametric Space
	4 Conclusions
	References
Structural Characterization of Some As-S-Sb-Te Nanostructured Materials
	1 Introduction
	2 Experimental
	3 Results and Discussions
		3.1 XRF Results
		3.2 X-ray Diffraction Patterns and SEM Investgations
		3.3 Optical and Photoelectric Properties
	4 Conclusions
	References
Photoluminescence Properties of Eu(TTA)3(Ph3PO)2
	1 Introduction
	2 Synthesis of Coordinating Compound Eu(TTA)3(Ph3PO)2
	3 Photoluminescence Spectra and Discussion
	4 Conclusions
	References
Characteristics of Surface-Barrier Structures on Zinc Diarsenide with Hole Conductivity
	1 Introduction
	2 General Results
	3 Conclusions
	References
Nanomodification of the Activated Concrete Mixture in Magnetofluidized Layer
	1 Introduction
	2 Installation and Research Methods
	3 Results and Discussion
	4 Conclusion
	References
Highly Conductive ZnO Thin Films Deposited Using CVT Ceramics as Magnetron Targets
	1 Introduction
	2 Experiment
	3 Experimental Results
		3.1 CVT Ceramics ZnO Doped with Ga, Al and In
		3.2 Characterization of ZnO Thin Films Doped with Ga and Al
	4 Conclusions
	References
Direct Surface Patterning Using Carbazole-Based Azopolymer
	1 Introduction
	2 Experimental Results and Discussion
		2.1 Gratings Recording
	3 Conclusions
	References
Biomedical Instrumentation and Signal Processing
Low Power Constant Current Driver for Implantable Electrostimulator of the Lower Esophageal Sphincter
	1 Introduction
	2 Design Review and Implementation
		2.1 Literature search
		2.2 Combined Driver with Op Amp and Digital Potentiometer
		2.3 Op Amp V-I Converter
		2.4 Proposed Output Driver Design
		2.5 Output Driver Testing and Implementation
	3 Discussion
	References
Optoelectronic Devices for Blood Testing
	1 Introduction
	2 Main Part
		2.1 The Main Goals
		2.2 Theoretical Foundations
		2.3 Obtaining Speckle Patterns
		2.4 Non-invasive Analysis
		2.5 Image Analysis
		2.6 Checking the Correctness of the Results
	3 Conclusions
	References
Smartphone-Based Pupillometer with Chromatic Stimuli to Screen Neuro-Ophthalmological Diseases
	1 Introduction
	2 Methods
		2.1 Study Participants
		2.2 Smartphone-Based Pupillometry System
		2.3 Pupillary Data Processing
		2.4 Chromatic Pupillometry Protocols
	3 Results
	4 Discussion
	5 Conclusions
	References
The Anisotropy of Light Propagation in Biological Tissues
	1 Introduction
	2 Experimental Procedure
	3 Results and Discussion
	4 Conclusions
	References
Cathodoluminescent UV Sources for Air Disinfection Applications
	1 Introduction
	2 Results
	3 Conclusions
	References
A MEMS-INS/GPS Positioning Device for Urban Life Mobility Improvement
	1 Introduction
	2 Difficulty Elements of the Positioning Problem
	3 Proposed Solutions for Data Processing
		3.1 First Stage in INS/GPS Data Fusion
		3.2 Second Stage in INS/GPS Data Fusion
	4 Hardware Structure
	5 Results of the System Testing and Conclusions
	References
In Vitro Analysis of Enamel Surfaces with Scanning Electron Microscope After Orthodontic Stripping Reduction Using Various Instruments
	1 Introduction
	2 Materials and Methods
		2.1 Preparation of Dental Surfaces
		2.2 Morphological Analysis with Scanning Electron Microscopy
	3 Results and Disscusions
	4 Conclusions
	References
Selective Ammonia Detection by Field Effect Gas Sensor as an Instrumentation Basis for HP-Infection Primary Diagnosis
	1 Motivation
	2 Measurement
	3 Conclusions
	References
Identifying the Level of Ionizing Radiation Using a Device Implemented on the Arduino Development Board
	1 Introduction
	2 Device Design and Realization
	3 Measurements on the Source of Americium 241. Device Calibration
	4 Conclusions
	References
Analysis of Mechatronic Devices or Systems that Identify the Biomechanical Parameters of the Lower Limb
	1 Introduction
	2 Devices for Biomechanical Measurement of Forces, Pressures
		2.1 Kistler Plate
		2.2 Footscan
		2.3 XSens- MVN System
	3 Multicriteria Analysis of Mechatronic Devices or Systems: Kistler, Footscan and Xsens MVN
	4 Conclusions
	References
Minimally Invasive, Fully Implantable Left Ventricular Assist Device: Concept, Design, and Early Prototyping
	1 Introduction
	2 Materials and Methods
	3 Results
		3.1 Concept
		3.2 Mathematical Modeling of the Pump
		3.3 Turbomachinery Design
		3.4 Design
		3.5 Early Prototyping
	4 Discussions
	5 Conclusions
	References
Near-Threshold Electron Emission Spectroscopy to Characterize Nanoobjects for Biomedical Applications
	1 Introduction
	2 Fundamentals
	3 Applications
	4 Conclusion
	References
A Less Traditional Approach to Biomedical Signal Processing for Sepsis Prediction
	1 Introduction
	2 Materials and Methods
		2.1 Data
		2.2 Main Steps of Data Preprocessing
		2.3 BDM as the “Core” Technique for Data Processing
		2.4 Data Processing Flow
		2.5 Machine Learning Stage
	3 Results
		3.1 ML System Creation
		3.2 ML System Performance
		3.3 Incorporation of the ML-System into an Application for Clinical Use
	4 Conclusions
	References
Influence of Change in Cardiac State on Probable Properties of Rhythmograms
	1 Introduction
	2 Analysis of the Probable Properties of the Rhythmogram for Different Cardiac States
		2.1 Cumulative Analysis of the Rhythmogram
		2.2 ANOVA of the Numerical Characteristics of the Rhythmogram
	3 Conclusions
	References
A Brain-Computer Interface for Controlling a Mobile Assistive Device by Using the NeuroSky EEG Headset and Raspberry Pi
	1 Introduction
	2 Hardware System – Neurosky and Raspberry Pi
	3 Software System – Python Application
	4 Results
	5 Conclusions
	References
4-Quadrant Interpretation of the Speed Spot Plot Asymmetry for Arrhythmia Detection
	1 Introduction
	2 Methods
	3 Asymmetry Analysis by 4-Quadrants of Speed Spot Graph
	4 Conclusions
	References
Internet of Things (IoT) in Monitoring Physiological Parameters
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusions
	References
Developing of Algorithms for Improving Accuracy of Search for Biomarkers Within Results of the Computed Tomography
	1 Introduction
	2 Materials and Methodology
	3 Improving Software Accuracy
	4 Results and Discussion
	5 The Conclusion
	References
Excitations in Condensed Matter
Switching of Magnetic and Polarizability Characteristics of Dinuclear [CrCo] Complexes via Intramolecular Electron Transfer
	1 Introduction
	2 Results and Discussion
	3 Conclusions
	References
Electron Transfer Phenomenon in the Dinuclear {Fe(µ-CN)Co} Complex: Interaction of Molecular Modes with Phonons
	1 Introduction
	2 Model
	3 Analysis of the Experimental Data
	References
Spin Crossover in Trinuclear and Protonated Tetranuclear Iron(II) Complexes: DFT Modelling
	1 Introduction
	2 Computational Details
	3 Results and Discussion
	4 Conclusions
	References
New Ground State of Dipolar Lattice of D2O@Beryl
	1 Introduction
	2 Experimental Details
	3 Results and Discussion
	4 Conclusions
	References
Excitonic States in Brillouin Zone Center of GaSe Layered Crystals
	1 Introduction
	2 Experimental Methods
	3 Experimental Results and Discussions
	4 Conclusions
	References
Population Dynamics in a Modulated Optomechanical Setup
	1 Introduction
	2 The Model
	3 Results and Discussions
	4 Conclusions
	References
Dynamics of Atomic-Molecular Conversion of Alkali Metal Isotopes at Ultralow Temperatures
	References
Photoinduced Anisotropy in Azopolymer Studied by Spectroscopic and Polarimetric Parameters
	1 Introduction
	2 Experimental Procedure
		2.1 Obtaining Azopolymer Thin Films
		2.2 Polarimetric Measurement
	3 Results and Discussions
		3.1 Spectroscopic Investigation of Azopolymer Films
		3.2 Polarimetric Investigations of Dependence of Exposure Angle and Chromophore Concentration
	4 Conclusions
	References
Molecular, Cellular and Tissue Engineering
The Isolation of Fibroblasts by Volumetric Regulation Cycles
	1 Introduction
	2 Materials and Methods
		2.1 Tissue Sample Harvest for Explant Preparation
		2.2 The Fibroblasts Isolation by Cycles of Volumetric Regulation
		2.3 The Fibroblasts Identification
	3 Results
	4 Discussion
	5 Conclusions
	References
The Cartilaginous Tissue Regeneration on Weight Bearing and Non-weight Bearing Surfaces of the Knee
	1 Introduction
	2 Materials and Methods
		2.1 The Graft Obtaining for Combination with the MSC
		2.2 Isolation and Culture of Autologous MSC
		2.3 Combination of MSC with Collagen Sponges
		2.4 The Fibrin Glue Obtaining
		2.5 Transplantation of Collagen Sponges Combined with Autologous MSC
		2.6 The Control Group
		2.7 The Results Evaluation
	3 Results
	4 Discussions
	5 Conclusions
	References
Composite Scaffolds with Inclusion of Magnetite Nanoparticles for Bone Tissue Engineering
	1 Introduction
	2 Materials and Methods
		2.1 Materials
		2.2 Scaffolds Preparation
		2.3 Morphology and Chemical Structure
		2.4 Mechanical Properties
		2.5 In Vitro Behavior
	3 Results and Discussions
		3.1 Morphology, Chemical Structure and Composition
		3.2 Mechanical Properties
		3.3 In Vitro Behavior
	4 Conclusions
	References
Evaluation of Ultrasound Application for the Decellularization of Small Caliber Vessels
	1 Introduction
	2 Materials and Methods
		2.1 Decellularization System
		2.2 Histological Analysis
	3 Results
	4 Discussion
	5 Conclusions
	References
Mimicking In VivoTissue Microenvironment for In VitroTesting – Hydrogels for Cell Encapsulation
	1 Introduction
	2 Materials and Methods
		2.1 Materials
		2.2 Methods
	3 Results and Discussions
		3.1 Hydrogel Formation
		3.2 Cell Encapsulation
	4 Conclusions
	References
New Hydrogels Based on Methacrylated Collagen and Hyaluronic Acid for Soft Tissue Engineering
	1 Introduction
	2 Materials and Methods
		2.1 Materials
		2.2 Preparation of Hydrogels
		2.3 Structural and Morphological Characterization
		2.4 Swelling Properties, Bioadhesion and in Vitro Degradability
		2.5 In Vitro Cytotoxicity Tests
	3 Results and Discussions
		3.1 Hydrogel Structure and Morphology
		3.2 Swelling Characteristics, Bioadhesion and in Vitro Degradability
		3.3 In vitro citocompatibility
	4 Conclusions
	References
Zinc Oxide and Gallium Nitride Nanoparticles Application in Biomedicine: A Review
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Cellular Lifesaving Flexible Device
	1 Introduction
	2 Design of the Wearable Device
	3 LTE Flexible Antenna
	4 Operation
	5 Conclusions
	References
Assessment of Gold Nanoparticles Uptake in Tissues of Female Mice and Their Offspring Using Neutron Activation Analysis
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Modern Devices and Tools for the Cornee Collection and Processing. Synthesis of Literature
	1 Introduction
	2 Materials and Methods
	3 Discussion
	4 Conclusions
	References
Techniques of Dental Pulp Decellularization
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Innovation, Development and Interdisciplinary Research
Breathing Pattern in Subjects with Borderline Personality Disorder in Pain Test
	1 Introduction
	2 Subjects and Methods
	3 Results and Discussions
	4 Conclusions
	References
Cathodoluminescence and X-Ray Luminescence of ZnIn2S4and CdGa2S4Single Crystals
	1 Introduction
	2 Cathodoluminescence of Zinc Thioindate and Cadmium Thiogallate. Experimental Results and Discussion
	3 X-Ray Luminescence of Zinc Thioindate and Cadmium Thiogallate
	4 Conclusions
	References
Molecular Modeling of the Interaction of Taxifolin with Quorum Sensing Regulator LasR of Pseudomonas aeruginosa
	1 Introduction
	2 Methods
		2.1 Protein Model and Ligand Molecule
		2.2 Clustering Metrics
		2.3 Ligand Docking Using Multiple Docking Programs
		2.4 Molecular Dynamics Simulations Using the Centroid Docked Poses
	3 Results
		3.1 Docking of Taxifolin with LasR
		3.2 Binding Modes of Taxifolin with LasR by MD Simulations
		3.3 Binding Modes in the LBD
		3.4 Binding Modes in the “Bridge” DBD
	4 Conclusions
	References
Investigation of Dynamical Properties of a Laser with Incorporated DBR Section Under the Influence of External Optical Feedback
	1 Introduction
	2 Setup, Model and Equations
	3 Results and Discussions
	4 Conclusions
	References
Preclinical Stage of Building a Machine Learning System for Sepsis Prediction: A Comparative Study of Four Algorithms
	1 Introduction
	2 Matherials and Methods
		2.1 Data
		2.2 Data Preprocessing
		2.3 Machine Learning
	3 Results
		3.1 ML Algorithms Performance
		3.2 Incorporation of the ML-System Based on GBM Algorithm into an Application for Clinical Use
	4 Conclusions
	References
Impact of the Covid-19 Pandemic on the Use of Microsoft 365 and Learning Outcomes at the Technical University of Moldova
	1 Introduction
	2 Materials and Methods
		2.1 TUM-Digital Portrait
		2.2 The Purpose of the Research
		2.3 Theoretical Framework and Exploratory Procedures
	3 Results and Discussion
	4 Conclusions
	References
Nanotechnology and Nonproliferation
	1 Introduction
	2 Current Status
	3 Conclusions
	References
Sorbents Obtained from Cellulose-Containing Waste for Water Purification
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Measuring and Information System for Monitoring Microwave Contamination of Urban Environment
	1 Introduction
	2 System Prototype Implementation
	3 System Prototype Testing
	4 Conclusions
	References
The Effects of Terahertz Radiation on the Development of Biological Organisms I: Wheat Seeds
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Microbiological Decontamination of Air and Surfaces Due to Nanosecond Discharges
	1 Optimization of Microbiological Decontamination
	2 Non-equilibrium (“Cold”) Oxygen Plasma - The Optimal Means for Microbiological Decontamination of Air and Surfaces
	3 Optimal Methods and Devices for Generation and Application of Non-equilibrium Oxygen Plasma
	4 Conclusions
	References
Biomedical Devices and Sensors
PEG-Ylated Phenothiazine Derivatives. Synthesis and Antitumor Activity
	1 Introduction
	2 Results and Discussions
	3 Compliance with Ethical Requirements
	4 Conclusion
	References
Analysis of Melanin Properties in Radio-Frequency Range Based on Distribution of Relaxation Times
	1 Introduction
	2 Samples Preparation
	3 Experimental Setup
	4 Data Processing
	5 Result and Discussion
	6 Conclusions
	References
Nanostructuring of Protein Systems by Electroactivation
	1 Introduction
	2 Materials and Methods
	3 Experimental
	4 Conclusions
	References
Silver Nanoparticles as Stimulators in Biotechnology of Porphyridium cruentum
	1 Introduction
	2 Material and Methods
	3 Results and Discussions
	4 Conclusions
	References
Study the Effect of UVC Radiation on Specific Regions of the SARS-CoV-2 Coronavirus Genome Encoding the Synthesis of Structural Proteins
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Organic Crystals of p- Type TTT2I3and n- Type TTT(TCNQ)2as Prospective Thermoelectric Materials for Biomedical Sensors
	1 Introduction
	2 Physical Model of the Crystal
	3 Transport Properties
	4 Numerical Modeling of the Results
	5 Conclusions
	References
Use of Fractional-Quadratic Approximation Invariant of Nonlinear Characteristic of Magnetoelectric Sensor
	1 Introduction
	2 Convenient Approximation Nonlinear Characteristic
	3 Device Diagram
	4 Example of Calculation
	5 Conclusion
	References
Involvement of Contact and Surface Phenomena in Nanolayered Amorphous Te Films for Toxic Gas Detection at Room Temperature
	1 Introduction
	2 Experimental
	3 Results
		3.1 Morphology and Design Details
		3.2 Gas Sensing Characterization
	4 Model
	5 Conclusions
	References
Biomedical Sensors Based on Micro- and Nanotechnology
	1 Introduction
	2 Characterization of Sensors for Biomedical Research
		2.1 Classification and General Characteristics of Sensors
		2.2 Characteristics of the Main Types of ΜBMS
		2.3 Typical ΜBMS Designs and Technologies
	3 Discussion and Conclusions
	References
Biomaterials for Medical Applications
Mechanical Interactions in Interpenetrating Composites
	1 Introduction
	2 Experimental
	3 Results and Discussion
	4 Conclusions
	References
Imino-Chitosan Hydrogels - Promising Biomaterials for CandidaInfections’ Treatment
	1 Introduction
	2 Materials and Methods
		2.1 Materials
		2.2 Methods
	3 Results and Discussions
		3.1 FTIR and NMR Spectroscopy
		3.2 Wide Angle X-ray Diffraction
		3.3 Scanning Electron Microscopy
		3.4 The Viscoelastic Behavior of the Hydrogels
		3.5 The Evaluation of the Antifungal Activity of the Hydrogels
	4 Conclusions
	References
Aqueous Cations and Excess of Translational Vibrations as the Evidences of Charge Transport in Biomaterials
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
		3.1 Spectral Signatures of Aqueous Cations and Water
		3.2 Speculations on Charge Transport Mechanisms
	4 Conclusions
	References
GaN Ultrathin Membrane for SERS Detection of Rhodamine B
	1 Introduction
	2 Results and Discussion
		2.1 Fabrication of GaN Membranes
		2.2 SEM and TEM Analysis of the Membranes
		2.3 XPS Analysis
		2.4 Raman and SERS Measurements
	3 Conclusions
	References
Wettability of Highly Conductive ZnO:Ga:Cl CVT Ceramics with Various Ga Content
	1 Introduction
	2 Experiment
	3 Experimental Results
		3.1 General Characterization of Ceramics
		3.2 Wettability of ZnO Ceramics
	4 Conclusions
	References
Antimicrobial Properties of a New Polymeric Material for Medical Purposes Under Conditions of Low-Intensity Current Without External Power Supplies
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Coordination Compounds of Cu(II), Ni(II) Based on Ethyl 4-Benzoate Thiosemicarbazons Derivatives of Salicyl Aldehyde. Antimicrobial and Antifungal Properties
	1 Introduction
	2 Experimental Section
		2.1 Synthesis of Thiosemicarbazones
		2.2 Materials and Methods
		2.3 Results
		2.4 Discussion
	3 Conclusions
	References
Investigation of the Effect of Adding Tantalum on the Microstructure and Mechanical Properties of Biomedical Ti-15Mo Alloy
	1 Introduction
	2 Experimental
		2.1 Materials
		2.2 Preparation of Sample
		2.3 Characterization of the Prepared Specimens
	3 Result and Discussions
	4 Conclusions
	References
Health Informatics, e-Health and Telemedicine
Assessment of Cyber Security Maturity for Critical Domains in Republic of Moldova
	1 Introduction
	2 Assessment of Cyber Security Maturity in Moldova
	3 Conclusions
	References
Features of Telemedicine Technology for Monitoring of Patients with Atopic Dermatitis
	1 Introduction
	2 Using of Additional Histogram Features to Improve the Quality of Image Analysis
	3 Experimental Estimation of Reducing the Error of Diagnostic Decision Making When Adding Additional Diagnostic Parameters
	4 Conclusions
	References
Python Implementation for Brain-Computer Interface Research by Acquiring and Processing the NeuroSky EEG Data for Classifying Multiple Voluntary Eye-Blinks
	1 Introduction
	2 Hardware and Software
		2.1 Hardware System – NeuroSky Mindwave Mobile Headset
		2.2 Software System – Python Implementation Based on Raw EEG Data Acquisition, Processing, and ANN Classification
	3 Python-Based Customized Scripts for Enabling Multiple Voluntary Eye-Blinks Classification
		3.1 Raw EEG Signal Acquisition and EEG Training Dataset Generation
		3.2 Artificial Neural Networks Based Classification of Multiple Voluntary Eye-Blinks
	4 Results and Discussions
	5 Conclusions
	References
Low-Cost Telemedicine Platform for Monitoring Patients Suspected of Being Infected with SAR-COV-2
	1 Introduction
	2 Design and Implementation of the Telemedicine Platform
		2.1 Description of Hardware Elements
		2.2 Realization of the Low-Cost Platform
		2.3 Testing the Low-Cost Telemedicine Platform
	3 Conclusions
	References
Providing Remote Monitoring of CVD in Specialized Medical and Diagnostic Complexes
	1 Introduction
	2 Features of Remote Diagnostics of CVD
		2.1 Tele-ECG
		2.2 24-Hour Blood Pressure Monitoring
		2.3 Laboratory and Diagnostic Tests
	3 Conclusions
	References
Object Locating System by Phone Tracking
	1 Introduction
	2 Localisation Methods
	3 Object Locating System by Phone Tracking
	4 Results
	5 Conclusions
	References
What Do Family Doctors Think About Patient Safety Culture in the Republic of Moldova?
	1 Introduction
	2 Material and Methods
		2.1 The Medical Office Survey of Patient Safety Culture (MOSOPSC)
		2.2 The Survey Participants
		2.3 Data Analysis
	3 Results
	4 Discussion
	5 Conclusion
	References
Clinical-Epidemiological Characteristics of Children Hospitalized with COVID - 19 in the Republic of Moldova
	1 Introduction
	2 Materials and Methods
	3 Results
	References
Clinical Engineering, Health Technology Management and Assessment
Biomedical Engineering and Occupational Therapy Approach in Technologies for Enhancement Human Labor and Defense Abilities
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Implementation of a Medical Equipment Inventory at a Regional Healthcare System in Greece
	1 Introduction
	2 Materials and Methods
		2.1 Background
		2.2 Medical Equipment Data Recording
		2.3 Data Entry in a MEMS
		2.4 System Capabilities and User Training
	3 Results
	4 Discussion
	5 Conclusions
	References
Endowment with Medical Devices and Their Conformity Assessment as Key Elements for Improving Access to High Quality Medical Services
	1 Introduction
	2 COVID-19 Pandemic, a Precondition for Endowment with Medical Devices
	3 Guaranteeing the Quality of Medical Services by Periodical Assessment of Medical Device Conformity
	4 Conclusions
	References
The Impact of Positive Blood Alcohol Content on Outcomes of Trauma Patients
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	References
Non-invasive Monitoring of Pulse Rate and Desaturation Events with Oximeter in Copd Patients with Cardiovascular Comorbidities
	1 Background
	2 The Aim
	3 Methods
	4 Results and Discussions
	5 Compliance with Ethical Requirements
		5.1 Statement of Informed Consent
		5.2 Statement of Human and Animal Rights
	6 Conclusion
	References
Deep Learning Methods for Tumor Segmentation and Detection in X-Ray Breast Imaging
	1 Introduction
	2 Methods
	3 Results
		3.1 Hidden Markov Model
		3.2 Resnet-34
		3.3 Deep Belief Network and Gaussian Mixture Model
		3.4 Faster RCNN
	4 Conclusion
	5 Future Work
	References
Author Index