Vehicle, mechanical and electrical engineering

Vehicle, Mechanical and Electrical Engineering
	Preface, Committees and Sponsors
	Table of Contents
	Chapter 1: Vehicle Engineering and Design
	Reverse Optimization Algorithm of CVT‘s Energy Economy
	Hybrid Mobile Power Supply Using PEMFC and Lithium Battery
	The Research and Design on the Electric Vehicles’ Centrifugal Automatic Transmission
	Design on a Collision Warning and Vehicle-Headlights Intelligent Switching System
	Study on the Closed-Loop Control Strategy of Voltage for Pure Electric Vehicle in Limp Mode
	Performance Analysis of a Pure Electric Light Off-Road Vehicle Based on the Cruise
	FSAE Race Car Engine Options on the Impact of Vehicle Design
	Based on CATIA Car Side Welding Fixture Design and Research
	Chapter 2: Traffic and Transport Engineering, Vechicle and Road Safety
	Effects of Traffic Calming Measures on Vehicle Speed Control and Road Safety
	Violation Behavior Analysis of Pedestrian and Non-Motorized Vehicle
	The Study of Traffic Rules Based on Cellular Automata Traffic Wave Model
	The Overall Structure of IOV and the Research of the Unsolved Key Technology of IOV in Intelligent Transportation System
	Vehicle Routing Problem Based on Heuristic Artificial Fish School Algorithm
	An Improved Cellular Automaton Model of Traffic Regulations and the Effect of Deceleration Probability
	Smoke Management System Design for Airport Terminal
	Chapter 3: Mechanical and Dynamical Principles and Design, Machinery and Manufacturing Engineering
	Influence of Guide Vane Wrap Angle Key Design Parameters on Hydraulic Performance of Nuclear Reactor Coolant Pump
	Numerical Investigation on the Flow in Tip Clearance of the Last Three Stages of Industrial Steam Turbine
	A Simplified Model of Semi-Open Impeller Stage and Analysis of its Effects on the Transient Flow
	Dynamic Analysis and Optimization of Pivot Points of Telescopic Jib Based on Genetic Algorithm
	Development of Testing Machine for Measuring Unsteady State EHL Film under Heavy Load
	Finite Element Analysis of Z-Shaped Pipe in the Directly Buried Heat-Supply Pipeline with Large Diameter
	Multiple Weibull Statistical Model of Random Censored Data of NC Machine Tools and Optimal Estimation of Parameters
	Controllable of Underwater Towing Tension Passive Compensation Device Design Research
	Engineered-Based Machining Parameters Analysis for Aircraft Structural Parts
	Parametric Design of Deep Groove Ball Bearing Based on Pro/Program and Family Table
	Parameter Study of Opposite Tape-Spring Flexure Hinge
	Research on the Methods for Common-Rail Pipe Holes Abrasive Flow Machining
	Intermediate Slabs and Optimization in Forging Process of Balance Elbow by FEM
	Analysis of Hydroelectric Unit’s Upper Bracket Based on Test and FEM
	The Optimization Method of Tailor Welded Blank Forming Process Based on Numerical Simulation
	Research on Gear Mesh Misalignments under the System Deformation
	Applying Multi-Objective Particle Swarm Optimization to Maintenance Scheduling for CNC Machine Tools
	On the Axisymmetrical Dissemination of Glycerine Driven by Shock Wave
	Static Stiffness Analysis of High Stiffness Rotary Hinge Locking Mechanism for SAR Antenna
	Research on the Variable Ratio Gear Modeling and Transmission Ratio Test Method of Rack and Pinion Variable Ratio Steering Gear
	Calculative Method for Critical Condition of Fire Liftoff Caused by Man-Made Interfering Jet Flow
	Trajectory Reconstruction Using Paper Target Experiment Based on UKF
	Performance Analysis of a Novel Compression Refrigeration System
	Numerical Study of Flow and Heat Transfer of Heat Exchanger with Louver Baffles
	Control and Analysis on Shot Peening Process to Aeropropeller Pitch Change Knob
	A New PANS Model for Unsteady Separated Flow Simulations
	FSAE Racing Gear Selection and Shifting Agencies Choose to Discuss the Impact of Car Drivers
	Modeling and Simulation of a New Type Intelligent Gas Pressure Regulator
	Calculation on Fracture Parameter of Model I Crack Tip Based on ANSYS
	Three-Dimensional Numerical Simulation of the Flow around Two Side-by-Side Cylinders of Different Diameters
	Chapter 4: System Modeling and Algorithms for Intelligent Automation and Control Systems
	Particle Swarm Optimization of PIλDμ Control of Heating Furnace Temperature Control System
	Self-Scheduled and Robust Control for Tilt Rotor Aircraft
	Mathematical Model of Obstacle Avoidance Shortest Time Path for Robot
	Synchronization Control of Chaotic Systems with Different Orders
	Research on Carrier-Attacker Control before Launching Air-Ground Guidance Weapons
	Control of Channel Power Compensation Based on Genetic Algorithm to Impairment Aware in Optical Network
	Study on Parametric Reverse Modeling
	Chaos Synchronization of Systems via Accelerated Factors
	Cooperative Output Regulation for a Class of Nonlinear Uncertain Multi-Agent Systems Using the Backstepping Method
	Simulation of Valve Position Feedback Mechanism Based on Pro/E and ADAMS
	Study on Single-Phase Grid-Connected Inverter Based on PI Control
	Intelligent Control of Time-Delayed System
	Applying LESO for Disturbance Rejection of Space Station
	Developing Fuzzy Control Irrigate System Based on PLC
	Greenhouse Moisture and Temperature Fuzzy Control System and PLC Program Design
	Anti-Synchronization Control of the Complex Lu System
	The Design of the Tiny-Skin Transplanter’s Pneumatic Control System
	An Improved Purging Control Algorithm for Small Power PEMFC
	The Research of Stamping Springback Compensation Algorithm Based on the Improved Fourier Transform
	Design and Simulation about Linkage of Caterpillar Beach Cleaner’s Graps
	Research on Big Data Consistency Algorithm of Multi-Sensor Fusion
	The Research of Loyalty Model Based on the PN (Petri Net) Algorithm
	The Research of Rapid Construction Method of Kinematics Coordinate System from a Kind of Mobile Robot
	Study on the Energy Management System of Electric Vehicle Charging Station Based on Multi-Agent System
	Research on Drive Control and Safety Management Strategy for Electric Vehicle
	Study on Control Strategy for Electric Starting up of Pure Electric Vehicle
	Study on the Control Strategy of Slope Starting for Pure Electric Vehicle
	Research on the Design and Manufacture of Steam Cleaning Machine Based on PLC
	The Design Method for Sequence Function Chart in Drilling Machine Control System
	The Control Design of the Chain Magazine Test Bench
	Design of Foil-Making Machine Based on Motion Controller
	Optimization Research on the Circuit Breaker Instantaneous Characteristic Experiment Based on Neural Network
	Analysis on Composite Action Control Strategy of Separate Meter-In Separate Meter-Out Control System
	A Design and Implementation for the Auto-Booting of Baseband Board with ARM, DSP and FPGA
	Chapter 5: System Test, Diagnosis, Detection and Monitoring, Instrumentation and Measurement, Optimization and Algorithms, Numerical Methods and Simulation
	Reliability Evaluation for Distribution System Considering the Access of Distributed Generations
	Transformer Fault Diagnosis Based on Online Sequential Extreme Learning Machine
	Analysis of a Nonlinear System with a Random Parameter
	The Research on Flow Calculation Method of the Ball Solenoid Valve
	Reflection Plane Precision Measuring Methods Research of Shipborne Measurement and Control Antenna
	Echo Doppler Fidelity’s Verification of Radar Simulator
	About Several Kinds of Probe on the Impact of Different Failure Modes on Inspection Speed Analysis
	Design of Light Moisture Tester and its Application in Tiefa Coal Industry Group
	Numerical Analysis of Buried Heating Branch Junctions
	Fault Prediction of Pitch Actuator for Wind Turbines
	Vivid Algorithm of Scene Simulation for URAV
	A New INS/VNS Integrated Navigation Model for Planetary Rovers
	Optimum Sensor Array for Passive Localization from Time Differences of Arrival
	Smoke Detection Alarm System Based on NRF401 and FPGA
	Road Flatness Detection Using Permutation Entropy (PE)
	Analysis of Natural Pollution Deposit on Optic Sensor for Monitoring of Insulator Contamination
	Comprehensive Evaluation of the Designing Scheme of AUV Platform Performance by AHP Method
	Data Prediction Algorithm in Wireless Sensor Networks for Oil and Gas Pipeline Monitoring
	The Research on Central Monitoring System for Wind Farm
	Ultrasonic Transceiver-Based Structural Deformation Monitoring with Location Ability
	Lunar Soft - Landing Trajectory of Mechanics Optimization Based on the Improved Ant Colony Algorithm
	Chaos Research of Asymmetric System Based on Melnikov Method
	The Design and Experiment of Levelness-Adjustable Clamping Device for Cable Gland
	Large-Scale Virtual Simulation of the Solar System Based on Java3D
	The Effect of Different Optimization Methods on Robustness for Robust Optimization Design
	Modeling and Simulation Research of Lidar Tomography Imaging
	Researching on Characteristics of Rayleigh Waves
	Evaluation Framework and Method of the Intelligent Behaviors of Unmanned Ground Vehicles Based on AHP Scheme
	Fracture Research on Preheating Installation of Directly Buried Heating Return Water Pipe with Large Diameter
	The Electric Monitoring System Application Based on ZigBee Wireless Technology
	Research on Magnetometer Positioning Technology Based on a Variable Magnetic Source
	A Method of Order Determination for ARX and ARMA Models Based on Nonnegative Garrote
	Research on Jamming Resource Scheduling Based on Multi-Target and Fuzzy Multi-Stage
	The Design and Implementation of a Certain Type of Information Machine Simulator Based on ARM
	PSO Based Feature Extraction Method for Analog Circuits Fault Information
	A Precision Resistance Generator for the Calibration of RTD-Based Temperature Instruments
	Research on Identification of Induction Motor Parameters Based on Nameplate Data
	Research on Wireless Temperature Measurement System for Electrical Equipment
	The Design of Mobile Phone Multimeter Based on the Android Platform
	Application of the Bat Algorithm to Optimize the BP Neural Network
	An Algorithm to Find the First K Spanning Trees with Minimum Weights
	The Multi-Site Joint Operation Method Based on Discharge Gate Ant Colony Algorithm
	A Novel and Improved Apriori Algorithm
	Algorithm for Computing Attribute Reduction Based on Radix Sort of Optimized Linked List Structure
	Chapter 6: Electrical and Electronic Technology, Power System Engineering
	Impact of DLC on Distribution System Reliability
	Doherty Power Amplifier with Dynamic Power Dividing Network for Enhanced Efficiency
	The Design of the Minimum CPU System of TMS320VC54x
	Research on Simulation of Electronic-Protection Circuit of Chopper Cascade Speed Control System
	A Kind of Electric-Corona-Prevent Paint
	Research on High-Power, High-Speed Laser Modulation and Enlarge Experiment
	PV Grid-Connected Inverter Islanding Detection Algorithm Improvements
	Summary of Research Status of Active Power Filter
	Based on Class D Amplifier Magnetic Resonance Wireless Transmission Technology
	Application Research of Electrical Automation Technology for Power Plant
	Research on the Key Factors of Mis-Operations and Correct Operations of the Residual Current Operated Protective Device
	Research and Application of UPS-CAN Protocol in Parallel System
	Selective Harmonic Elimination PWM Technique with Walsh Functions for Nine-Level Cascade Inverter
	An Active Equalization Technique Based on Flyback Converter Topology
	Development and Research of MEMS
	Capacitive Touch Sensing Principle and Application in the Car
	Microcomputer Interface Experimental System Design
	The Model of Estimating MTL Crosstalk in Inhomogeneous Medium
	Research on Four Water-Filling Power Distribution Schemes in MU-MIMO System
	Design of Electronic Control System for HCCI Optical Engine and Optical Testing
	Chapter 7: Communication for Vehicles and Transportation, Signal Processing
	Discussion on the Technology Application of OFDM in the Ad-Hoc Network of Unmanned Aerial Vehicle (UAV)
	A Novel Anti-Collision Algorithm of Tags in RFID System
	Design Method of an Intermediate Transcoding Structure Based on XML
	An Effective Multiple-Receiver SAS Range Doppler Algorithm Based on the Modified Range History Approximation
	The Study on DFS Algorithm of Unmanned Aerial Vehicle Platform Communications Relay System
	Method of Common View Based on Digital Satellite Television
	Modulation Type Recognition of OFDM Signals Based on EMD
	Network-Coding-Based Mutually Cooperative Transmission in Deep Space Communications
	Research on Near Space Optical Communication Transmitting and Receiving Technology
	Chapter 8: Information Technology and Networks Applications
	Software Defined Networking: A New Trend of Networking
	Integrated Avionics Network Dynamics Analysis
	High Performance Start Node of Edge Ordering for Infrastructure Networks
	The Design of the Power Energy Management System Based on Wireless Sensor Network
	The Applications of Information Visualization in Power Systems
	The Application of Communication Network in Distribution Automation
	The Application of Distribution GIS in Regional Distribution Network
	Multi-Objective Programming Model for Joint Scheduling of Ships in the Complex Water Network
	Research on Energy Saving in Cellular Networks Based on Dynamic Load Balancing
	Application of Process Migration in Intelligent Router Based on BLCR
	Channel Assignment Algorithm in Centralized WLAN
	Integrity and Privacy Preserving Data Aggregation Algorithm for WSNs
	A Study of the Model which Can Improve LEACH Protocol
	Power Control Optimization for Position Tracking in Vehicle Network
	An Optimized Design of Safety Messages’ Communication Sub-Layer in Vehicle Ad-Hoc Network
	Visualizing Interrupts and Replication with Timer
	Chapter 9: Recognition, Video and Image Processing
	An Effective Program Clustering Algorithm for TV Recommendation System
	The Application of Gaussian Mixture Modeling in Traffic Flow Videos
	Research on Locality Preserving Discriminant Projection Algorithm Based on Gabor for Face Expression Recognition
	Design and Algorithm Optimization of P2P Mobile Monitoring Network-Based Facial Recognition System
	Rotation Moment Invariant Feature Extraction Techniques for Image Matching
	The Application of Improved PSO Algorithm in PMMW Image OSTU Threshold Segmentation
	A Robust Line Filter for Automatic X-Ray/CT Image Segmentation
	The Research Based on H.264 Embedded Video Systems of Optimized Compression Algorithm
	Chapter 10: Materials for Vehicles and Transportation, Civil Constructions, Fuel Cells and Energy Materials
	Effect of Ce on Secondary Extrusion Deformation Microstructure of ZM21 Alloy
	Effects of Zn on Microstructure and Mechanical Properties of Mg-6.0Zn-0.6Zr-1.0Y Magnesium Alloys
	Influence of Laminate Scheme on Design of Continuous Fiber Reinforced Composite Turbofan Engine Shaft
	Analysis of Tunnel Running through Bridge Pile Foundation Based on the MIDAS/GTS
	Influences of Ground Reflection on the Elevated Box Bridge Structure Noise
	Acoustic Properties of Magnetorheological Fluids under Magnetic Fields
	Synthesis and Photoelectric Properties of Donor-Acceptor-Donor Molecule Containing Perylene Diimide
	Preparation and Properties of SiO2-P2O5-TiO2 Membrane for Fuel Cell Electrolytes
	Analysis of Resistance of Current Collector in Packing-Type Microbial Fuel Cell
	Vibrating Rechargeable Battery Design Research Based on the Two Kinds of Charging Ways
	Collision Simulation and Analysis of Energy-Absorbing Box for Vehicle
	Keywords Index
	Authors Index