Recent Trends in Industrial and Production Engineering: Select Proceedings of ICAST 2020

Preface
Acknowledgements
Contents
About the Editors
A Comparative Analysis of Different Techniques of Thermal Barrier Coating
	1 Introduction
	2 Various Techniques of Coating
		2.1 Atmospheric Plasma Spraying Technique (APS)
		2.2 Electron Beam-Physical Vapor Deposition (EB-PVD)
		2.3 High Velocity Oxygen Fuel (HVOF)
		2.4 Kinetic Spray Coatings
		2.5 Comparison Between the Techniques of Coating
	3 Conclusion
	References
A Review on Post Additive Manufacturing Techniques to Improve Product Quality
	1 Introduction
	2 Temperature Effect on 3D-Printed Parts
	3 Reason of Porosity and Affective Measures
	4 Surface Roughness Affects and Measures
	5 Warping
	6 Quality Methods
	7 Crack Detection in 3D-Printing Process
	8 Material Selection
	9 Conclusion
	References
A Review on Various Types of Burr Formation in Drilling
	1 Introduction
	2 Results and Discussions
	3 Conclusions
	References
Application of 5s Methodology in a Small-Scale Enterprise: Case Study
	1 Introduction
	2 5s Implementation
		2.1 Seiri (Sort)
		2.2 Seiton (Set)
		2.3 Seiso (Shine)
		2.4 Seiketsu (Standardizing)
		2.5 Shitsuke (Sustain)
	3 Conclusions
	References
Availability Analysis of Shoe Manufacturing Unit Using Petri Nets
	1 Introduction
	2 Petri Nets
	3 System Description
		3.1 Assumptions for the Modelling
	4 Petri Net-Based System Modelling
		4.1 Representation of Dynamic Behaviour of the System
		4.2 Performance Analysis of the System
	5 Conclusion
	References
Delamination Detection and Evaluation in Composite Laminates Using Guided Ultrasonic Waves
	1 Introduction
	2 Experimental Details
		2.1 Materials
		2.2 Methods
	3 Results and Discussions
		3.1 Delamination of Varying Extent (Length)
		3.2 Delamination Defects at Different Depths
	4 Conclusions
	References
Development of a Systematic Framework to Optimize the Production Process in Shop Floor Management
	1 Introduction
	2 Research Objective
	3 Research Methodology
	4 Research Gap
	5 Industry Description
	6 Results and Discussion
	7 Conclusions
	References
Effect of Process Parameters on Machining of D2 Steel Using Taguchi Method
	1 Introduction
		1.1 Taguchi Technique
		1.2 Work Materials
		1.3 Electrode Material
		1.4 Experimental Details
	2 Results and Discussions
		2.1 Plot for S/N Ratio
		2.2 Surface Micro-structure of the EDMed Surface
	3 Conclusions
	References
Experimental Investigation of Water Absorptions and Charpy Test of Epoxy Composite Immersed in Different Aqueous Medium
	1 Introduction
	2 Materials
		2.1 Fabrication Procedure of Test Specimens
		2.2 Procedure of Moisture Absorption Testing and Evaluation
		2.3 Charpy Test Characterization on Fabricated Sample
	3 Results and Discussion
		3.1 Water Absorption Test
		3.2 Charpy Test Results
	4 Conclusion
	References
Four Wheeler’s Health Monitoring by Sound Level Measurement: A Case Study
	1 Introduction
	2 Description of Selected Vehicles
	3 Test Results with Discussion
	4 Conclusion
	References
Green Manufacturing a Modern Era for Indian Manufacturing Industries: A Review
	1 Introduction
	2 Literature Review
	3 Conclusion
	References
Investigation of Fused Deposition Modeling (FDM) Process Parameters Influencing the Additively Manufactured Part Characteristics: A Review Paper
	1 Introduction
		1.1 Methods and Materials
		1.2 FDM Process
	2 FDM Process Parameters Affecting the Characteristics of 3D Printed Parts
		2.1 FDM Process Parameters
		2.2 Mechanical Properties of FDM Printed Parts
		2.3 Part Quality Characteristics
	3 Results and Discussions
	4 Conclusions
	References
Investigation of Manual Material Tasks Performed by Workers in North Indian Manufacturing Industries
	1 Introduction
	2 Material and Methods
	3 Results and Discussion
	4 Conclusions
	References
Investigation of Tribological Properties of Stir Cast Hybrid Aluminum Composites
	1 Introduction
	2 Materials and Method
	3 Results and Discussion
		3.1 Wear Test Results
		3.2 Wear Results Discussion
	4 Conclusion
	References
Investigations of Wear Behavior of Journal Bearing Materials
	1 Introduction
	2 Experiment Details
	3 Results and Discussions
	4 Conclusions
	References
Metallurgical and Mechanical Behavior of Friction Stir Processed WE43/Nano-SiC Surface Composite
	1 Introduction
	2 Experimentation
		2.1 Materials
		2.2 FSP Setup Used in Study
		2.3 Microstructure Characterization and Phase Composition
		2.4 Mechanical Properties
	3 Result and Discussion
		3.1 Metallurgical Behavior
		3.2 Mechanical Properties
	4 Conclusions
	References
Modal and Static Analysis for Analyzing the Effect of Loading on Crack Propagation Rate Using FEM
	1 Introduction
	2 Mathematical Formulation
		2.1 Deriving Element Stiffness Matrices and Load Vector
		2.2 Solving the Equation and Applying Boundary Conditions or Initial Conditions
		2.3 Assemble the Element Matrices and Vectors
	3 Finite Element Analysis
		3.1 Defining the Problem: Pre-processing
		3.2 Creating Three Dimensional Model
		3.3 Selection of Element Type
		3.4 Defining Material Properties
		3.5 Meshing
		3.6 Loads/boundary Conditions
		3.7 Define Contact and Check Contact Element
		3.8 Post Processing
	4 Result and Discussion
		4.1 Mode Shape Analysis
		4.2 Loading Effect on Crack Propagation
	5 Conclusion
	References
Optimization and Validation of Material Removal Rate During EDM of HSLA Steel
	1 Introduction
	2 Material and Methods
		2.1 Work Material and Experimental Conditions
	3 Design of Experiments
	4 Results and Discussion
	5 Confirmation Run
	6 Conclusions
	References
Parametric Influence on Material Removal Rate of K-90 Alumina Ceramics During Zircon Sand (Abrasives) Jet Assisted Machining
	1 Introduction
	2 Experimental Procedure
	3 Result and Discussion
	4 Conclusion
	References
Recent Development in Friction Stir Welding: An Advancement in Welding Technology
	1 Introduction
	2 Material Used
	3 Temperature Measurement During FSW
		3.1 Thermocouple Used for Measurement
	4 Conclusion
	References
Recent Trends in Weldability and Corrosion Behavior of Low Nickel Stainless Steels
	1 Introduction
	2 Literature Review
		2.1 Literature Search Methodology
		2.2 Weldability of Low Ni-based SS
		2.3 Corrosion Behavior
		2.4 Pre Weld Heat Treatment
	3 Discussion of Study
	4 Conclusion
	References
Reliability Analysis—A Critical Review
	1 Introduction
	2 Literature Review
	3 Discussion and Prospective
	4 Conclusions
	References
Shop Floor Productivity Enhancement Using a Modified Lean Manufacturing Approach
	1 Introduction
	2 Research Objective
	3 Production Description
	4 Implementation of Process Improvement Technique
	5 Results and Discussion
	6 Conclusions
	References
Simulation Model for Productivity, Production and Cost Improvement in an SME
	1 Introduction
	2 Problem Statement
	3 Action Plan for Development of the Simulation Model
	4 Design of the Simulation Model
	5 Results and Discussion
	6 Conclusion and Future Scope
	References
STL Generation from Point Cloud Data with User-Controlled Triangulation for Additive Manufacturing
	1 Introduction
	2 Literature Review
	3 Terminologies
	4 Methodology
	5 Implementation
		5.1 Developed Algorithm
		5.2 STL Generation from Triangulated Mesh
	6 Validation
	7 Conclusion
	References
Sustainable Green Lean Six Sigma Methodology and Application Status: A Perspective Review
	1 Introduction
	2 Integration Model of Green and Lean Six Sigma
	3 Proposed GLS Implementation Framework
	4 Current Status of GLS Implementation
	5 Research Gaps
	6 Conclusion and Future Research Agenda
	References
The Effect of Gating System on Quality of Traditional Rural Metal Castings of India
	1 Introduction
	2 Background
	3 Experimental Methodology
		3.1 Design of Experiment
		3.2 Experimental Procedure
	4 Results and Discussions
		4.1 Mechanical Analysis of Cast Samples
		4.2 Characterization
		4.3 Gradation by TOPSIS
		4.4 Discussions
	5 Conclusion
	References
Tool Wears in Milling of Al/SiCp Composites by Dry and MQL Milling
	1 Introduction
	2 Materials for Experimentation
	3 Experimental Design
	4 Modelling of Tool Wear (Vbmax.)
	5 Analysis of Results and Optimization
	6 Validate Software Results
	7 Conclusion
	References