Proceedings of the 36th International MATADOR Conference

Front Matter....Pages i-xix
Front Matter....Pages 1-1
Robust Control Strategy of Fluid Dispensing Process for Solid Freeform Fabrication of Tissue Engineered Hydrogel Scaffold....Pages 3-7
An innovative approach for the fabrication of highly conductive nanocomposites with different carbon....Pages 9-13
Analysis of local field enhancement including tip interaction for the application to nano-manipulation using FDTD calculations....Pages 15-18
Front Matter....Pages 19-19
Numerical Simulation of the Four Roll Bending Process....Pages 21-24
Investigation on the Process Parameters and Process Window of Three-Roll-Push-Bending....Pages 25-28
Casting of Aluminium Alloy Strip by Improved Single-Roll Caster....Pages 29-32
Casting of Al-Si-SiC p composite alloy strip by a vertical type twin roll caster....Pages 33-36
Casting of aluminium alloy clad strip using a vertical type tandem twin roll caster....Pages 37-40
Micro-forming of aluminum alloy by cold rolling....Pages 41-44
Rapid shape measurement of micro deep drawing parts by means of digital holographic contouring....Pages 45-48
Fracture Limits of Metal Foils in Micro Forming....Pages 49-52
A theoretical model for the velocity field of the extrusion of shaped sections taking into account the variation of the axial component....Pages 53-57
A theoretical model for the material flow for the forward extrusion of complicated and non-symmetric sections....Pages 59-62
An Optimization Algorithm for Improving Combined Multi-Stage Deep-Drawing and Ironing Processes of Axisymmetric Components. Analysis and Experimentation....Pages 63-66
Nanofinishing Process for 3D Freeform Surfaces Using Ball End MR Finishing Tool....Pages 67-70
Pressure Distribution in Cold Rolling of Turbo-engine Thin Compressor Blades....Pages 71-74
Determination of the duty cycle in thermoset pultrusion....Pages 75-78
Development of New Press-Forming Process for a Screw-Threaded Fuel Filler Pipe....Pages 79-82
Roller Hemming: A New Simulation Model for the Automotive Industry....Pages 83-86
Control of the uniformity of direct electrical heating for Rotational Moulding....Pages 87-90
Front Matter....Pages 91-91
High Efficiency Deep Grinding, an Application with conventional wheels....Pages 93-96
Detection of High and Low Temperature in the Grinding Zone using Laser Irradiation Technique....Pages 97-100
Investigation of Influences of Wheel Speed on Root Geometrical Dimension of Gas Turbine Blade....Pages 101-104
Ultra-fine Finishing of Metallic surfaces with Ice Bonded Abrasive Polishing Process....Pages 105-108
Plane surface grinding with application of Minimum Quantity Lubrication (MQL)....Pages 109-112
Study of the Behavior of Air Flow around a Grinding Wheel under the Application of Pneumatic Barrier....Pages 113-116
Front Matter....Pages 117-117
A cutting plane algorithm for solving single machine scheduling problems with uncertain sequence-dependent setup times....Pages 119-122
A Knowledge-Based Engineering System for Assembly Sequence Planning....Pages 123-126
Product Family Modeling and Optimization Driven by Customer Requirements....Pages 127-130
Transparency in Production by Monitoring the Condition of Molds, Dies and Machines....Pages 131-134
Simulation Modelling of Product-Service Systems: the Missing Link....Pages 135-138
RFID Deployment at an Airport: A Simulation Study....Pages 139-142
Front Matter....Pages 143-143
Failure knowledge based decision-making in product quality....Pages 145-148
Predicting the End-Of-Life of Defence Electronic Systems at the Conceptual Design Stage....Pages 149-152
Design of Multi-Span Microfixturing Cell for Parallel Assembly of Microparts Using Electrothermally Actuated Microclamps....Pages 153-156
An Evaluation Method Based on Multiple Quality Characteristics for CNC Machining Center using Fuzzy Matter Element....Pages 157-160
Design of a Meso-scale 3-axis Milling with Nanometer Accuracy....Pages 161-164
A Novel Concept to Design Machine Tool Structures using Multifunctional Materials....Pages 165-168
Design Synthesis of a three legged SPS Parallel Manipulator....Pages 169-173
Piezo-Metal-Composites as Smart Structures....Pages 175-178
Front Matter....Pages 143-143
A Methodology for Engineering Design Change Management Using Modelling and Problem Solving Techniques....Pages 179-182
Modeling and Analysis of the strength of Adhesively Bond CFRP-Aluminium T-joints....Pages 183-186
Front Matter....Pages 187-187
Modelling of Machine Tapping with Straight Flute Taps....Pages 189-192
High Speed MQL Drilling of Titanium Alloy using Synthetic Ester and Palm Oil....Pages 193-196
Estimation of minimum chip thickness for multi-phase steel using acoustic emission signals....Pages 197-200
Extension of a Simple Predictive Model for Orthogonal Cutting to Include Flow below the Cutting Edge....Pages 201-204
Drilling Carbon Fiber Reinforced Plastics with Diamond Coated Carbide Cutting Tools....Pages 205-208
Research on 3D Groove for Cutting Heat Distribution of Coated Carbide Milling Inserts....Pages 209-212
In-Process Monitoring and Prediction of Surface Roughness on CNC Turning by using Response Surface Analysis....Pages 213-216
Influence of Edge Bevelling on Burr Formation in Face Milling of an Aluminium Alloy....Pages 217-221
Experimental Investigations on Drilling of Woven CFRP Epoxy Laminates: The Effect of Pilot-hole or Drill Chisel Edge on Delamination....Pages 223-226
Modelling of hard turning: effect of tool geometry on cutting force....Pages 227-230
Selection of optimal process parameters for gear hobbing under cold air minimum quantity lubrication cutting environment....Pages 231-234
The Formation of Adiabatic Shear Bands as a result of Cryogenic CNC Machining of Elastomers....Pages 235-238
Analysis of process parameters in the micromachining of Ti-6Al-4V alloy....Pages 239-242
Tool Orientation Effects on the Geometry of 5-axis Ball-end Milling....Pages 243-246
On deposition and characterisation of MoS x -Ti multilayer coating and performance evaluation in dry turning of aluminium alloy and steel....Pages 247-250
Novel Developments in Cutting and Grinding of Preheated Billets....Pages 251-254
Investigation of the Cutting Forces and Tool Wear in Laser Assisted Milling of Ti6Al4V Alloy....Pages 255-258
Numerical Techniques for CAM Strategies for Machining of Mould and Die....Pages 259-263
Front Matter....Pages 265-265
Net Shape Laser Butt Welding of Mild Steel Sheets....Pages 267-270
Humping Modelling in Deep Penetration Laser Welding....Pages 271-274
Keyholing or Conduction – Prediction of Laser Penetration Depth....Pages 275-278
Dual Focus Nd:YAG Laser Welding of Titanium Alloys....Pages 279-282
Product design for welding....Pages 283-286
Studies on the Effect of Process Parameters on the Shear Performance of Joints of Aluminium Alloy Produced by Adhesive Joining, Spot Welding and Weld-Bonding....Pages 287-292
Influence of Electron Beam Local Annealing on the Residual Stresses for the joints with Electron Beam Welding of near α titanium alloy....Pages 293-296
Similar and Dissimilar Welding of Ductile Cast Iron....Pages 297-302
Front Matter....Pages 303-303
Recognition of Contact States in Robotized Assembly Using Qualitative Wavelet Based Features and Support Vector Machines....Pages 305-308
Linear Axes Performance Check on a Five-Axis Machine Tool by Probing an Uncalibrated Artefact....Pages 309-312
A Holistic Approach to Quantifying and Controlling the Accuracy, Performance and Availability of Machine Tools....Pages 313-316
Development of a Small 3-axis Angular Sensor for Real-time Abbé Error Compensation on Numerically Controlled Machine Tools....Pages 317-321
Micro-scale co-ordinate metrology at the National Physical Laboratory....Pages 323-326
Coating Thickness Measurement....Pages 327-330
Digital Alignment of a reconstructed Hologram for Measurement of Deterioration of Tools....Pages 331-334
Implementation of decision rules for CMM sampling in a KBE system....Pages 335-338
Machine Vision System for Inline Inspection in Carbide Insert Production....Pages 339-342
Assembly Tolerance Analysis including Flatness: Using Virtual Mating Plane....Pages 343-346
Inspection of defects in CFRP-Foam Layered structure composite plates of aerospace materials using lock-in thermography....Pages 347-353
Image Processing Methods for Online Measurement in Radial-Axial Ring Rolling....Pages 355-358
Front Matter....Pages 303-303
Cognitive Production Metrology: A new concept for flexibly attending the inspection requirements of small series production....Pages 359-362
The Metrology Enhanced Tooling for Aerospace (META) Framework....Pages 363-366
Front Matter....Pages 367-367
Application of 3D Printing for the Rapid Tooling of Thermoforming Moulds....Pages 369-372
Printing Characteristics and Performance of Polymer Thick Film Inks for Direct Write Applications....Pages 373-376
Effect of work piece volume on statistically controlled rapid casting solution of aluminum alloys using three dimensional printing....Pages 377-380
Using Additive Manufacturing Effectively: A CAD Tool to Support Decision Making....Pages 381-384
Dynamic strength and fracture toughness analysis of beam melted parts....Pages 385-388
An additive method for photopatterning of metals on flexible substrates....Pages 389-392
Front Matter....Pages 393-393
An investigation of the EREE-based low carbon manufacturing on CNC machine....Pages 395-399
Reduced Energy Consumption by Adapted Process Chains....Pages 401-404
Model-Based Predictive Consumption of Compressed Air for Electro-Pneumatic Systems....Pages 405-408
Schottky Solar Cells Based on Graphene and Silicon....Pages 409-411
Variation of Engineer Performance and Emissions Using Ethanol Blends....Pages 413-416
Front Matter....Pages 417-417
EDM performance is affected by the white layer....Pages 419-423
Development of a hybrid method for electrically dressing metal-bonded diamond grinding wheels....Pages 425-428
Robust Parameter Design and Multi-Objective Optimization of Electro-Discharge Diamond Face Grinding of HSS....Pages 429-433
Analysis of Non-limiting Current Resistance and Isopulse Power Supply for WEDM....Pages 435-438
Some Aspects of Surface Integrity Study of Electro Discharge Machined Inconel 718....Pages 439-444
Front Matter....Pages 445-445
Advances in Direct Metal Deposition....Pages 447-450
Effect of processing parameters in manufacturing of 3D parts through laser direct metal deposition....Pages 451-454
Front Matter....Pages 445-445
A numerical investigation of powder heating in coaxial laser metal deposition....Pages 455-458
Laser cladding of NiCr-WC metal matrix composites: dependence on the matrix composition....Pages 459-462
Front Matter....Pages 463-463
Wettability analysis of CO 2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF)....Pages 465-468
Fast parallel diffractive multi-beam laser surface micro-structuring....Pages 469-472
Effect of different processing parameters of Ti: Sapphire femtosecond laser on human dental dentine....Pages 473-476
Forming microchannels on a glass substrate by CO 2 laser....Pages 477-480
Influence of pressure on aluminium plasma expansion produced by a nanosecond laser pulse: a numerical study....Pages 481-484
Front Matter....Pages 485-485
Consolidation behaviour and microstructure characteristics of pure aluminium and alloy powders following Selective Laser Melting processing....Pages 487-490
Influence of distortion on part accuracy of Indirect Metal Selective Laser Sintering....Pages 491-494
Surface Roughness Studies in Selective Laser Sintering of Glass filled Polyamide....Pages 495-499
Front Matter....Pages 501-501
Finite Element Modelling of the Laser Forming of AISI 1010 Steel....Pages 503-507
The effect of laser beam geometries on laser forming of sheet metal....Pages 509-512
Towards Controlled 3D Laser Forming....Pages 513-516
Front Matter....Pages 517-517
Fracture Toughness Modifications By Means of CO 2 Laser Beam Surface Processing of a Silicon Nitride Engineering Ceramic....Pages 519-522
Surface oxygen diffusion hardening of TA2 pure titanium by pulsed Nd: YAG laser under different gas atmosphere....Pages 523-526
Investigation on the Key Techniques of Confined Medium and Coating Layer for Laser Shock Processing on Aeroengine Blade....Pages 527-530
Improvement of Corrosion Performance of HVOF MMC Coatings by Laser Surface Treatment....Pages 531-534
Numerical and Experimental Studies on the Laser Melting of Steel Plate Surfaces....Pages 535-538
Analysis of temperature distribution during fibre laser surface treatment of a zirconia engineering ceramic....Pages 539-542
Front Matter....Pages 543-543
WC Nano powder cold planting via laser shock peening onto aluminium/magnesium alloy surfaces....Pages 545-548
Front Matter....Pages 543-543
Femtosecond laser induced two-photon polymerization of dielectric-loaded surface plasmon-polariton nanowaveguides....Pages 549-552
Real-time control of polarization in ultra-short pulse laser micro-processing....Pages 553-556
Front Matter....Pages 557-557
Laser Inertial Fusion-based Energy (LIFE) - Developing Manufacturing Technology for low cost and high volume fusion fuel is critical to our future energy needs....Pages 559-568
Initial Strategies for 3D RAP Processing of Optical Surfaces Based on a Temperature Adaptation Approach....Pages 569-572
Wireless & Powerless Laser Welding Monitoring System....Pages 573-576
System Design for Laser Assisted Milling of Complex Parts....Pages 577-580
Direct Laser Writing System of Mask for Integrated Photonics Devices....Pages 581-584
Front Matter....Pages 585-585
Direct Laser Welding for Al- Li Alloy Plate without the Cleaning of Surface Film....Pages 587-590
Characteristics of keyhole and molten pool during laser welding of TC4 Ti-alloy....Pages 591-594
Typical Joint Defects in Laser Welding of Aluminium-Lithium Alloy....Pages 595-598