Proceedings of ICDMC 2019: Design, Materials, Cryogenics, and Constructions

Front Matter ....Pages i-xv
 Numerical Investigation on Amphibious UAV Using Turbulent Models for Drag Reduction  (P. Gokul Raj, Balasubramanian Esakki, P. Vikram, Lung-Jieh Yang)....Pages 1-8
 Design and Simulation of Self-balancing Robot Using Reaction Sphere  (M. Vignesh, A. S. Praveen)....Pages 9-16
 Topology Optimization and Modal Analysis of Nanosatellite Structure  (K. J. Vinay Kumar, K. Sesha Sai CharanTej, Nabin Kumar Jana, Diva Sharma, Balasubramanian Esakki)....Pages 17-29
 Experimental Investigation of Twin Elliptic Orifice Using High Speed Jet Facility  (S. Parameshwari, Pradeep Kumar, S. Thanigaiarasu, E. Rathakrishnan)....Pages 31-39
 Study of Nox Treatment with Selective Catalytic Reduction and Diesel Exhaust Fluid with Emphasis on Importance of Mixer in Flow  (Ibraheem Raza Khan, Y. Lethwala, Aayush Chawla, S. Jaichandar)....Pages 41-49
 Advancements in Automotive Applications of Fuel Cells—A Comprehensive Review  (Newel Francis Thomas, Rishabh Jain, Nishanth Sharma, S. Jaichandar)....Pages 51-64
 Energy Generation from Piezoelectric Material in Automobile  (Aman Akotkar, Anand Kumar Sinsh, S. Jaichandar)....Pages 65-70
 Evaluation of Microalgae Biodiesel Blend Along with DTBP as an Ignition Enhancer on Diesel Engine Attributes  (A. Gurusamy, V. Gnanamoorthi, P. Purushothaman, P. Mebin Samuel, A. A. Muhammad Irfan)....Pages 71-82
 Experimental Investigation on the Emission Level of a Single Cylinder Petrol Engine with Manifolds of Different Geometry  (K. Raja, Amala Justus Selvam, P. L. Rupesh)....Pages 83-89
 Experimental Analysis of Hevea Brasiliensis Methyl Ester Diesel Blend with Antioxidant Additive in a Di-diesel Engine  (A. A. Muhammad Irfan, Sivanandi Periyasamy, A. Gurusamy)....Pages 91-100
 Recent Application and Preservation of Bamboo as Sustainable Material  (Amol Ashok Kamble, Suppiah Subramaniam)....Pages 101-111
 Development of Eco-friendly Alkaline Activated Concrete  (Dhavamani Doss Sakthidoss, Thirugnanasambandam Senniappan)....Pages 113-127
 Design Optimization of Suspension and Steering Systems for Commercial Vehicles  (V. Vijaykumar, P. Anand)....Pages 129-142
 Experimental Study on Vibration Control of Transportation Trailers Used for Spacecraft  (Nandikolla Diwakar, S. Balaguru)....Pages 143-151
 Thermo Mechanical Analysis of Multipass Butt-Welded Joints by Finite Element Method  (T. Raja, P. Anand, M. Sundarraj, M. Karthick, A. Kannappan)....Pages 153-164
 Effect of Aspect Ratio on the Buckling Load of Stiffened Circular Plates  (V. Lakshmi Shireen Banu, Veeredhi Vasudeva Rao)....Pages 165-177
 Experimental Study on Tyre Dynamics and Properties of Heavy Load Transporting Vehicle  (S. Balaguru, J. Venkataramana)....Pages 179-190
 Analytical Modeling and FEM Simulation of the Collapse Voltage of an Angular Ring Metallization-Based MEMS Ultrasonic Transducer  (Reshmi Maity, N. P. Maity, Shonkho Suvro, K. Guha, K. Srinivasa Rao, K. Girija Sravani et al.)....Pages 191-198
 Study of 3D Hexagonal Membrane Structure for MEMS-Based Ultrasonic Transducer Using Finite Element Method  (Reshmi Maity, N. P. Maity, K. Guha, K. Srinivasa Rao, K. Girija Sravani, S. Baishya)....Pages 199-209
 Intelligent Fixture Layout Design for End Milling Process Using Artificial Neural Networks  (F. Michael Thomas Rex, D. Ravindran, A. Andrews, Lenin Nagarajan)....Pages 211-225
 Design and Analysis of an Agriculture Solar Panel Support Structure with Tilting Mechanisms  (V. Aghilesh, P. Manigandan, Suresh Reddy, K. Raja sekar, N. Shunmugavelu)....Pages 227-235
 Design and Fabrication of Ocean Water Pumping and Storage System  (M. Muthukannan, S. Anantha Krishnan, Ajay Pratap Kushwaha)....Pages 237-251
 Influence of Cylindrical Threaded Tool Pin Profile on the Mechanical and Metallurgical Properties of FSW of ZE42 Magnesium Alloy  (A. K. Darwins, M. Satheesh, G. Ramanan)....Pages 253-262
 Free Vibration and Buckling Analysis of FG-CNT Plates  (Lenin Nagarajan, I. Mohammed Irfan)....Pages 263-275
 The Role of Processing Temperature in Equal Channel Angular Extrusion: Microstructure Mechanical Properties and Corrosion Resistance  (Gajanan M. Naik, S. Narendranath, S. S. Satheesh Kumar)....Pages 277-285
 Reciprocating Wear Studies of Inconel 718 and Mod.9Cr–1Mo Ferritic Steel by Surface Profilometric Characterization   (K. Adityan, N. L. Parthasarathi, P. Ashoka Varthanan, R. Priya, Utpal Borah)....Pages 287-301
 High-Temperature Sliding Wear Characterization Studies of AISI 316 L(N) by Surface Profilometry  (N. Aruldev, N. L. Parthasarathi, B. Rajasekaran, Utpal Borah)....Pages 303-320
 A Review on Mechanical Properties of Medium Density Fiberboard Prepared from Different Fiber Materials  (N. Pugazhenthi, P. Anand)....Pages 321-333
 Investigation of Wear Behavior of Rapid Solidified Al–Si Alloys  (N. D. K. Malleswararao, I. N. Niranjan Kumar)....Pages 335-341
 Investigation of Compressive Properties of Hybrid Aloe vera/Silica Nanoparticles Composite  (R. Giridharan, S. J. Anirudh, S. Anirudh, M. P. Jenarthanan)....Pages 343-347
 A Study on Investigation of Tensile Properties of Aloe vera Fiber Reinforced Epoxy Composites  (R. Giridharan, N. Anerudh, M. M. Mithun Srivan, M. P. Jenarthanan)....Pages 349-355
 Experimental Investigation on Drilling of Kenaf-Banana Fiber-Reinforced Hybrid Fibre-Reinforced Polymer Composites  (K. M. Alagappan, S. Vijayaraghavan, R. Giridharan, M. P. Jenarthanan)....Pages 357-366
 Material Modeling of Particle Reinforced in Metal Matrix Composite  (M. Sundarraj, R. Varatharajan)....Pages 367-377
 Fatigue Crack Growth Behavior of a Nickel-Base Super Alloy Inconel 718 Under Spectrum Loads  (Sharanagouda G. Malipatil, Anuradha N. Majila, Chandru D. Fernando, C. M. Manjunatha)....Pages 379-386
 Mechanical and Metallurgical Properties of Hybrid Composite Material  (V. Karthi, K. Marimuthu, G. Boopathy, N. Ramanan)....Pages 387-392
 Mechanical Characterization of Prosopis Juliflora Fiber-Reinforced Polymer Composites  (J. Mohamed Yazzir, R. Prabu, S. Bharath, A. Anbu Raj)....Pages 393-400
 Characterization of Free Vibration Damping Properties in Hybrid Composites  (M. Dinesh, R. Asokan, S. Vignesh, Kommana Tarun Kumar, Nallamilli Sampath Kumar Reddy)....Pages 401-410
 Effect of Wire EDM Process Parameters on Machining of Aluminium Matrix Composites (356/Fly Ash)  (J. Udaya Prakash, S. Ananth, S. Jebarose Juliyana, P. John Paul)....Pages 411-419
 Genetic Algorithm and Particle Swarm Optimization in Minimizing MakeSpan Time in Job Shop Scheduling  (K. R. Anil Kumar, Edwin Raja Das)....Pages 421-432
 Autonomous Risk and Hazard Management System for Smart Cities  (Arivukkarasan Raja, E. Pavithra)....Pages 433-443
 Optimization of Turning Process Parameters in Machining of Heat-Treated Ductile Iron Bar Using TiC/TiCN/Al2O3-Coated Tungsten Carbide Tool  (K. Ramesh, K. Gnanasekaran, S. Prathap Singh, M. Thayumanavan)....Pages 445-453
 Optimization of Drilling Process in Heat-Treated Al–20% SiC Functionally Graded Composite Using Grey Relational Analysis  (K. Vinoth Babu, S. Prathap Singh, S. Marichamy, P. Ganesan, M. Uthayakumar)....Pages 455-464
 Investigation of Defects in Deep Drawn Al1050/SS304 Sandwich Composite by Using Non-destructive Techniques  (Atul S. Takalkar, Lenin Babu Mailan Chinnapandi)....Pages 465-472
 Effect of Overhauling on the Performance of Boiler  (S. Jebarose Juliyana, J. Udaya Prakash, A. Divya Sadhana, K. Karthik)....Pages 473-481
 Thermogravimetric Analysis of Friction Welding of Dissimilar Material  (V. Raja, P. Periyasamy, G. Boopathy, E. Naveen, N. Ramanan)....Pages 483-490
 Experimental and Theoretical Investigation of Interaction Effect on Energy Absorption of Bi-tubular Structures Under Quasi-static Axial Crushing  (K. Vinayagar, A. Senthil Kumar, M. Vel Vignesh, K. Gokulan)....Pages 491-503
 Three-Dimensional FE Model and Temperature Evaluation on AA 2014 Friction Stir Weldments with Steel and Cu-Backing Plates  (Swathi Balaji, K. Balachandar)....Pages 505-513
 Investigations on Interrelations Between Design for X-Guidelines and Product Life cycle Phases—An MDM-Based Approach  (M. Manojkummar, K. E. K. Vimal, Abdul Zubar Hammed, K. Jayakrishna)....Pages 515-523
 Investigation on the Temperature Effect of Friction Welding Process for Dissimilar Materials: Ti-6Al-4V and SS304L with Aluminium Coated  (R. Ramesh Kumar, R. Varatharajan, V. Vinu Vaishak)....Pages 525-533
 Numerical Analysis of Critical Heat Flux for Vertically Upward and Downward Flows in Circular Pipe Sections  (Rajeshwar Sripada, N. Subaschandar, Veeredhi Vasudeva Rao)....Pages 535-544
 Design, Analysis and Fabrication of New Type Duct Air Cooling System for Radiators  (K. Suryakumar, S. Irudayaraj)....Pages 545-560
 An Experimental Augmentation of Gravity-Assisted Concentric-Tube Heat Pipe Induced Heat Exchanger Under the Influence of Methanol and Acetone Working Fluids  (P. Ramkumar, M. Sivasubramanian, P. RajeshKanna, P. Raveendiran)....Pages 561-569
 Investigation on Helical Coiled Tube Heat Exchanger for Parallel and Counter Flow Using CFD Analysis  (P. Saravana Bhavan, J. Selwin Rajadurai)....Pages 571-588
 Design and CFD Analysis of Wickless Heat Pipes Filled with Refrigerants as Working Fluids for HVAC Applications  (B. Sivaramakrishnan, J. Selwin Rajadurai)....Pages 589-606
 A Review on the Enhancement of Heat Exchanging Process Using TiO2 Nanofluids  (M. Armstrong, M. Siva Subramanian, N. Selvapalam)....Pages 607-620
 Modeling of Flow-Induced Vibration Response of Heat Exchanger Tube with Fixed Supports in Cross Flow  (Kore Someshwar Vishwanath, S. Balaguru)....Pages 621-635
 Temperature Regulation of CIS Photovoltaic Module Using Eutectic Salt Hydrate as PCM  (P. Ramanan, K. Kalidasa Murugavel, D. Hari Kishan, G. Suriyanarayanan)....Pages 637-652
 Influence of Nanofluid and Inclination Angle on the Temperature Distribution of the Thermosyphon  (Sidhartha Das, Asis Giri, S. Samanta)....Pages 653-657