Novel Approaches to Improving High Temperature Corrosion Resistance

Content: 
Front matter, Pages i-ii
Copyright, Page iv
Contributor Contact Details, Pages xvii-xxvi
European Federation of Corrosion (EFC) publications: Series introduction, Pages xxvii-xxviii, P. McIntyre, B.A. Rickinson, J.P. Berge, G. Kreysa
Volumes in the EFC series, Pages xxix-xxxiii
1 - Design strategies for oxidation-resistant intermetallic and advanced metallic alloys, Pages 3-18, Michael P. Brady, Peter F. Tortorelli, Karren L. More, E. Andrew Payzant, Beth L. Armstrong, Hua-Tay Lin, Michael J. Lance, Feng Huang, Mark L. Weaver
2 - Alloying with copper to reduce metal dusting rates, Pages 19-35, J. Zhang, D.M.I Cole, D.J. Young
3 - Performance of candidate gas turbine abradeable seal materials in high temperature combustion atmospheres, Pages 36-64, N.J. Simms, J.F. Norton, G. McColvin
4 - Two calculations concerning the critical aluminium content in Fe-20Cr-5Al alloys, Pages 65-79, G. Strehl, G. Borchardt, P. Beaven, B. Lesage
5 - The different role of alloy grain boundaries on the oxidation mechanisms of Cr-containing steels and Ni-base alloys at high temperatures, Pages 80-92, V.B. Trindade, U. Krupp, P.H. E.-G. Wagenhuber, S. Yang, H-J. Christ
6 - Improving metal dusting resistance of Ni-X alloys by an addition of Cu, Pages 93-109, Y. Nishiyama, K. Moriguchi, N. Otsuka, T. Kudo
7 - Effects of minor additions and impurities on oxidation behaviour of FeCrAl alloys in the development of novel surface coatings compositions (SMILER), Pages 113-128, V. Kochubey, H. Al-Badairy, G. Tatlock, J. Le-Coze, D. Naumenko, W.J. Quadakkers
8 - Lifetime extension of FeCrAIRE alloys in air. Potential role of enhanced Al reservoir and surface pre-treatment (SMILER), Pages 129-160, J.R. Nicholls, M.J. Bennett, N.J. Simms, H. Hattendorf, D. Britton, A.J. Smith, W.J. Quadakkers, D. Naumenko, V. Kochubey, R. Fordham, R. Bachorczyk, D. Goossens
9 - Effect of gas composition and contaminants on the lifetime of surface-treated FeCrAlRE alloys (SMILER), Pages 161-175, G.J. Tatlock, H. Al-Badairy, R. Bachorczyk-Nagy, R. Fordham
10 - Development of novel diffusion coatings for 9–12% Cr ferritic-martensitic steels (SUNASPO), Pages 176-192, V. Rohr, M. Schütze, E. Fortuna, D.N. Tsipas, A. Milewska, F.J. Pérez
11 - Steam oxidation and its potential effects on creep strength of power station materials (SUNASPO), Pages 193-209, M. Schütze, V. Rohr, L. Nieto Hierro, P.J. Ennis, W.J. Quadakkers
12 - The erosion-corrosion resistance of uncoated and aluminized 12% chromium ferritic steels under fluidized-bed conditions at elevated temperature (SUNASPO), Pages 210-235, E. Huttunen-Saarivirta, S. Kalidakis, F.H. Stott, V. Rohr, M. Schütze
13 - Silicon surface treatment via CVD of inner surface of steel pipes, Pages 236-248, K. Berreth, K. Maile, A. Lyutovich
14 - Performance of thermal barrier coatings on γ-TiAl, Pages 249-263, R. Braun, C. Leyens, M. Fröhlich
15 - Looking for surface treatments with potential industrial use in high temperature oxidation conditions, Pages 264-275, G. Bonnet, J.M. Brossard, J. Balmain
16 - Reliable assessment of high temperature oxidation resistance by the development of a comprehensive code of practice for thermocycling oxidation testing (COTEST), Pages 279-296, M. Schütze, M. Malessa
17 - Variation in cyclic oxidation testing practice and data: The European situation before COTEST, Pages 297-311, S. Osgerby, R. Pettersson
18 - Designing experiments for maximum information from cyclic oxidation tests and their statistical analysis using half normal plots (COTEST), Pages 312-333, S.Y. Coleman, J.R. Nicholls
19 - Influence of cycling parameter variation on thermal cyclic oxidation testing of high temperature materials (COTEST), Pages 334-362, M. Schütze, M. Malessa, S.Y. Coleman, L. Niewolak, W.J. Quadakkers
20 - Rapid cyclic oxidation tests, using joule heating of wire and foil materials (COTEST), Pages 363-383, J.R. Nicholls, T. Rose, R. Hojda
21 - Thermo-mechanical fatigue – the route to standardisation (TMF-STANDARD), Pages 384-399, T. Beck, P. Hähner, H.-J. Kühn, C. Rae, E.E. Affeldt, H. Andersson, A. Köster, M. Marchionni
22 - Oxidation behaviour of Fe-Cr-Al alloys during resistance and furnace heating, Pages 400-414, H. Echsler, H. Hattendorf, L. Singheiser, W.J. Quadakkers
23 - Service conditions and their influence on the oxide scale formation on metallic high temperature alloys for the application in innovative combustion processes, Pages 415-427, G. Teneva-Kosseva, H. Köhne, H. Ackermann, M. Spähn, S. Richter, J. Mayer
24 - Reducing superheater corrosion in wood-fired boilers, Pages 428-444, P.J. Henderson, C. Andersson, H. Kassman, J. Högberg, P. Szakálos, R. Pettersson
25 - Hot erosion wear and carburization in petrochemical furnaces, Pages 445-473, R.L. Deuis, A.M. Brown, S. Petrone
26 - High temperature corrosion of structural materials under gas-cooled reactor helium, Pages 474-490, C. Cabet, A. Terlain, P. Lett, L. Guétaz, J.-M. Gentzbittel
27 - Geometry effects on the oxide scale integrity during oxidation of the Ni-base superalloy CMSX-4 under isothermal and thermal cycling conditions, Pages 491-500, R. Orosz, H.-J. Christ, U. Krupp
28 - What are the right test conditions for the simulation of high temperature alkali corrosion in biomass combustion?, Pages 501-513, T. Blomberg
29 - Optimisation of in-service performance of boiler steels by modelling high-temperature corrosion (OPTICORR), Pages 517-532, L. Heikinheimo, D. Baxter, K. Hack, M. Spiegel, M. Hämäläinen, U. Krupp, M. Arponen
30 - Influence of gas phase composition on the kinetics of chloride melt induced corrosion of pure iron (OPTICORR), Pages 533-549, A. Ruh, M. Spiegel
31 - Development of toolboxes for the modelling of hot corrosion of heat exchanger components (OPTICORR), Pages 550-567, K. Hack, T. Jantzen
32 - Computer-based simulation of inward oxide scale growth on Cr-containing steels at high temperatures (OPTICORR), Pages 568-581, U. Krupp, V.B. Trindade, P. Schmidt, S. Yang, H.-J. Christ, U. Buschmann, W. Wiechert
33 - High temperature oxidation of γ-NiCrAl modelling and experiments, Pages 582-598, T.J. Niidam, N.M. Van Der Pers, W.G. Sloof
Index, Pages 599-617