Networked Control Systems for Connected and Automated Vehicles: Volume 1

Contents
The Analysis of the Cargo Base and Development of Measures to Increase the Competitiveness of Freight Railway Transportation
	1 Introduction
	2 Materials and Methods
	3 Results
		3.1 The Quality System of Customer Service
		3.2 SWOT Analysis
		3.3 Electronic Document Management System
		3.4 Electronic Trading Platform “Freight Transportation”
	4 Discussion
	5 Conclusions
	References
Operational Management Model of Air Carrier’s Cargo Flows as a Smart Logistics Tool for Sustainable Development
	1 Introduction
	2 Methodology
	3 Results and Discussion
	4 Conclusion
	References
Experimental Determination of Asynchronous Traction Drive Energy Efficiency Indicators Under Varying Load
	1 Introduction
	2 Methods
	3 The Test Bench
	4 Results
		4.1 Voltage and Current at the Input to the Converter
		4.2 Three-Phase Voltage and Current at the Motor Input
		4.3 Power and Efficiency in Continuous Operation
		4.4 The Electromagnetic Torque and Efficiency
	5 Tests of the Traction Drive Under Variable Load
	6 Determination of the Electric Locomotive Efficiency When Working with Variable Load
	7 Conclusion
	References
Efficiency of the Project for the Production of the Modernized Switched Reluctance Motor
	1 Introduction
	2 Materials and Research Methods
	3 Results
	4 Consideration
	5 Conclusion
	References
Simulation Modeling of the Influence of the Volume of the Pneumohydroaccumulator in the Pressure Line on the Characteristics of Double-Sided Hydraulic Impact Device
	1 Introduction
	2 Methods
	3 Conclusions
	References
Improving the Efficiency of Electric Rolling Stock Operation Due to the Analysis of Data from Computer Vision Systems
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	References
Study of a Device for Calibrating of Indicating Gages Using Machine Vision
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Relation of the SYM, ASYM Indices of the Ring Current Magnetic Field to Auroral Indices
	1 Introduction
	2 Materials and Method
	3 Results and Discussion
	4 Conclusion
	References
Real-Time 3D Surround View System for Vehicle Based on Panoramic Stitching Image
	1 Introduction
	2 Materials and Methods
		2.1 Camera Model
		2.2 Camera Auto-Calibration Process
		2.3 Image Blending
		2.4 Photometric Alignment
	3 Results
	4 Conclusion
	References
Control of the Sand Feeding System Operation as a Reserve for Improving the Adhesion Properties of the Traction Rolling Stock
	1 Introduction
		1.1 Modes of Loading of Locomotives by Adhesion
		1.2 Generalized Indicators of Wheel Slip for Locomotives
	2 Methods
	3 Results
	4 Conclusion
	References
Electronic Technical Process System at Transport Engineering Enterprises, Increasing Efficiency and Occupational Safety
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Main Directions for Improving the Operational Work of the North Caucasian Traffic Control Directorate
	1 Introduction
	2 Materials and Methods
		2.1 Analysis of the Freight Trains Movement Schedule Fulfillment
		2.2 Analysis of the Speed of Delivery of Cargo Shipments
		2.3 Operation of Marshalling and Major Precinct Stations
		2.4 Analysis of the Locomotive Crews Working Time of Freight Traffic
		2.5 Prospective Lengthened Arms for Servicing Trains by Locomotive Crews
	3 Results and Discussion
	4 Conclusions
	References
Determination of Energy Consumption for Train Traction
	1 Introduction
	2 Materials and Methods
	3 Modeling Results
	4 Discussion 
	References
Diversification of Operating Companies Services by Railway
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusion
	References
Acoustic Properties of Gear Grinding Machines Used in Transport Engineering Enterprises
	1 Introduction
	2 Materials and Methods of Research
	3 Results
	References
Assessment of Occupational Risks in the Selection of Noise Reduction Measures in the Transport Industry
	1 Introduction
	2 Research Methodology
	3 Results
	4 Conclusions
	References
Analysis of the Influence of the Technical and Economic Characteristics of Innovative Isothermal Rail Cars on the Their Life Cycle Costing
	1 Introduction
	2 Methods and Materials
	3 Results
	4 Conclusion
	References
Application of Statistical Analysis in Applied Research
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusions
	References
Branding Without a Price Premium: Low-Cost Chains of Production and Transportation of Products as an Anti-crisis Imperative for Differentiating Product Supply in a Low Demand Environment
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Determination of the Stress-Strain State of Highly Flexible Rods Under Various Boundary Conditions
	1 Introduction
	2 Problem Statement
	3 Research Methods
	4 Discussion of the Results
	5 Conclusion
	References
Contact Stress of Two Cylinders
	1 Introduction
	2 Discussion
	3 Contact Surface Stresses
		3.1 Stresses from Normal Pressure
		3.2 Full Slip Stresses
	4 Stresses in the Presence of Areas of Sticking and Sliding
		4.1 Sticking Zone Stress (xgec)
		4.2 Sliding Zone Stress (xlec)
	5 Conclusion
	References
Operating Surface Damage as a Cause of the Destruction of Wheelset Bandages
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusions
	References
Peculiarities of the Influence of the Rolling Modes of the Axle of Wheel Pairs on the Degree of Their Surface Hardening
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Parts Restoring Methods
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusion
	References
Improving the Reliability of the Brake and Unloading Lines of Motor Dump Cars Due to the Improvement of Individual Elements of the Tipping Cylinders
	1 Introduction
	2 Methods, Analysis and Results
	3 Conclusion
	References
Thermal and Stress–Strain State of the Diesel Locomotive Asynchronous Motor
	1 Introduction
	2 Methods
	3 Analysis of the Stress–Strain State of an Induction Motor Bearing
	4 Results
	5 Conclusion
	References
Influence of Reversible Microdeformations of the Contactless Brake Disk Surface on the Thermal State of Disk Brake Members During Braking
	1 Introduction
	2 Goal
	3 Research Methods
	4 The Research Results and Their Discussion
	5 Conclusions
	References
Control of Internal Mechanical Stress in Rails Using the Acoustoelastic Effect
	1 Introduction
	2 Methodology for Testing
	3 Results
	4 Discussion
	References
Simulation Modeling of the Technological Process for Grinding Rails in the Track by Rail Grinding Trains
	1 Introduction
	2 Research Methods
	3 Research Results
	4 Results Discussion
	References
Improvement of Hydromechanization Technology for Earthmoving Works
	1 Introduction
	2 Research Methods
	3 Research Results
	4 Results Discussion
	5 Conclusions
	References
Models of Working Time Losses for Hydraulic Transport Systems
	1 Introduction
	2 Research Methods
	3 Research Results
	4 Results Discussion
	5 Conclusions
	References
Turn Contact Device for Low-Maintenance Rail Fastening
	1 Introduction
	2 Research Method
	3 Research Results
	4 Conclusions
	References
Experimental Assessment of the Railway Bridges’ Metal Spans Bearing Elements Stress State
	1 Introduction
	2 Research Methods
	3 Research Results
	4 Results Discussion
	5 Conclusion
	References
Assessing the Effectiveness of Rail Grinding Trains
	1 Introduction
	2 Research Methods
	3 Research Results
	4 Results Discussion
	References
Accelerometer Signal Classification Algorithms Based on Mel-Frequency Cepstrum and Fully Connected Neural Network
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	References
Mathematical Modeling of Snow Particles Transportation by Air Stream
	1 Introduction
	2 Research Methodology
	3 Results
	4 Conclusion
	References
Organization of Material Resources Supply in Transport Construction
	1 Introduction
	2 Research Methods
	3 Results Discussion
	References
Methodology for Calculating the Required Number of Reserve Elements to Ensure the Required Machinery Fleets’ Serviceability
	1 Introduction
	2 Research Methods
	3 Research Results
	4 Conclusion
	References
Physical Modeling of Snow-Air Flow
	1 Introduction
	2 Research Methods
	3 Results
	4 Conclusion
	References
Study of Dynamic Temperature Loads for Power Plant Elements
	1 Introduction
	2 Research Methods
	3 Research Results
	4 Results Discussion
	References
Processes of Noise Generation of Gear Hobbing Machines at Transport Engineering Enterprises
	1 Introduction
	2 Materials and Methods of Research
	3 Results
	4 Results
	References
Simulation Modelling of Car Movement on Sorting Tracks
	1 Introduction
	2 Research Methods
	3 Research Results
	4 Conclusions
	References
Simulation Model of Retarder Stopper on the End of Classification Tracks
	1 Introduction
	2 Purpose
	3 Methodology
	4 Results and Discussion
	5 Conclusion
	References
Developing a Decision Support System for the Electric Locomotive Driver to Eliminate Malfunctions En Route
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusions
	References
Health Protection of Employees of an Electric Locomotive Repair Enterprise
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Analysis of the Parameters of Digitalization of Business Processes in the Construction and Transport Industry
	1 Introduction
	2 Methods and Materials
	3 Results and Discussions
	4 Conclusion
	References
Marketing of Territories in the System of Tasks of Managing the Sustainable Development of the Regional Economy and Transport Network
	1 Introduction
	2 Methods and Methods
	3 Results and Discussions
	4 Summary
	References
Selection of a Supplier of Building Materials for the Construction of Transport Infrastructure Facilities
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Discussion
	5 Summary
	References
Assessment of Innovation Trends and Determination of the Development Trajectory of a Large Russian Enterprise
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Summary
	References
Resource-Saving Building Structures for Individual Housing and Transport Infrastructure Construction
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Conclusion
	References
Applying Linear Modeling to Optimize the Operation of Berths During Loading and Unloading Operations
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Conclusion
	References
Russian-Chinese Innovation Cooperation in Science and Technology
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Summary
	References
Problems of the Production of Forensic Construction and Technical Expertise
	1 Introduction
	2 Methods and Materials
	3 Results and Discussions
	4 Summary
	References
Risk Factor Calculation Methods in Economic Efficiency Assessment of Transport Investment Projects
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Summary
	References
Innovative Activity and Labor Productivity Growth in the Industry of Transport, Construction and Energy
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Summary
	References
Determination of the Nature of the Participation of Non-profit Organizations in Strengthening Human Capital and Economic Space
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Summary
	References
Mathematical Modeling the H2SO4-Catalyzed Alkylation of Isobutane with Olefins
	1 Introduction
	2 Materials and Methods
	3 Experiments
	4 Conclusion
	References
Modelling of Blockchain Technology in the Electoral Process
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusion
	References
Design of Information System for Educational Organization
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Expert System MARCS for the Formation of Organization’s Personnel Reserve Based on Neural Networks
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Website Spoofing as Technology of Cyber Attacks on the Computer Systems
	1 Introduction
	2 Methods
	3 Results and Discussion
	References
User Data Protection in Computer Networks
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Asymtotics of Solutions of a Boundary Value Problem for the Hyperbolic Equation
	1 Introduction
	2 Materials, Methods and Auxiliary Statements
	3 Results
	4 Conclusion
	References
Mivar’s Approach to Detailed Description of Knowledge for the Academic Subject “Rocket and Space Manufacturing Technologies”
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	References
Management of Educational Programs at the University Based on Mivar Expert Systems
	1 Introduction
	2 Methods
		2.1 Mivar Expert Systems for Education Management
		2.2 The Issue of Creating Mivar Networks of the Curriculum
		2.3 Formation of the Mivar Model of the Curriculum
	3 Results
	4 Discussion
	References
Risk Assessment in the Office of Reception of Measuring Instruments
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	References
Determination of Locomotive Traction Efficiency on the Section of Marokand-Kattakurgan of Uzbek Railway
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusions
	References
Research of Surface and Near – Surface Region Diffusion Doped Silicon by Manganese
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Modern Directions of Development Health and Safety Systems in the Transport Sector
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Method for Calculating the Criteria of the Boundary Layer of the Air Flow Washing the Working Surfaces of the Disc-Shoe Brake Mechanism
	1 Introduction
	2 Materials and Research Results
	3 Conclusion
	References
Automation of Monitoring of Unauthorized Buildings
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Computer Optimization of ANN Hyperparameters for Retrospective Information Processing
	1 Introduction
	2 Materials and Methods
	3 Results
		3.1 Building an Automated Hyperparameter Optimization Program
		3.2 Visualization of the Results of Optimization of ANN Parameters Using “Tuner.Search”
	4 Discussion
	5 Conclusions
	References
Development of Multimodal and Intermodal Transportation in the Russian Federation
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Project Data Management Based on the Digital Project of Construction Organization
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
The Influence of the Design Parameters and Technological Factors on Functional Properties of the Spiral Joints of the Parts
	1 Introduction
	2 Methods
		2.1 Determination Design Parameters SFPJ
		2.2 Simulated SFPJ by the Finite Element Method
	3 Results
		3.1 The Influence of Design Parameters on the Nominal Area of SFPJ
		3.2 Distribution of Equivalent Stresses Along the Spiral Section of the Joint
	4 Discussion
	5 Conclusion
	References
Efficiency of the Application of Information Technologies in the Interests of Economic Security with the Use of Stochastic Modeling
	1 Introduction
	2 Methods
	3 Results
	4 Conclusion
	References
On the Problems of Algorithmization of Automated Decision Support
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Digital Transformation of the Transport Complex in Russia
	1 Introduction
	2 Materials and Methods
	3 Results
		3.1 Digital Transformation of the Transport Complex
	4 Conclusions
	5 Discussion
	References
Theoretical and Experimental Study of the Vehicle’s Dynamics Equipped with the Mechanical Stepless Transmission
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Principles of Integration of Dynamic Case Based Reasoning for Transportation Systems
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Effect of Laser Hardening on Operational Properties of Single-Carbide Hard Alloys
	1 Introduction
	2 Problem Statement
	3 Material and Methods of Research
	4 Experimental Research Results
	5 Conclusion
	References
Integrated Approach to Assessing the Impact of Traffic Flows on the Environment
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Analysis of Sources of Acoustic Radiation for Circular Saws
	1 Introduction
	2 Materials and Methods of Research
	3 Conclusion
	References
Information Technologies in Monitoring of Urbanized Territories in the Western Russian Arctic Sector
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Modeling the Behavior of Aluminum in the Metal-Water System by the Method of Multidimensional State Diagrams
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Modeling the Effect of the Chemical Properties of Aqueous Solutions in the Construction of Multidimensional Phase Diagrams
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Influence of Moisture Content of Loamy Soil on Shear Resistance Parameters
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Proposals to Refine the Model for Assessing the Quality of Software Products
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Principles of Mathematical Modeling of Wagon Flows Distribution in the Portside Transport and Technological System
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Development of Measures for Road Traffic Managing and Improving Its Safety
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	References
The Use of Chrysotile Asbestos in Concrete to Solve Economic Problems of Transport Infrastructure
	1 Introduction
	2 Methods
	3 Results and Discussion
	4 Conclusion
	References
Features of Application of Progressive Methods of Predictive Modeling for Solving Transport Tasks
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Development of Resilience in the Context of Ensuring the Psychological Safety of Future Transportation Workers
	1 Introduction
	2 Results
	3 Conclusion
	References
Simulation Results for Optimization of Load of Flexible Threads Rotating on a Rotor
	1 Introduction
	2 Research Methods
	3 Results
	4 Conclusion
	References
Determination of the Temperature Range of Heating the Vehicle Body at the Door Fixing Points
	1 Introduction
	2 Materials and Equipment
	3 Simulation Results and Experimental Data
	4 Conclusion
	References
Problems of Implementation and Use of BIM Technology in the Construction of Transport Infrastructure in Russia
	1 Introduction
	2 Main Part
	3 Results and Discussions
	4 Conclusion
	References
The Use of Alloys with Thermoelastic Phase Transformations in the Design of Automobile Hinges to Improve Post-accident Safety
	1 Introduction
	2 Materials and Equipment
	3 Results and Experimental Data
	4 Conclusion
	References
The Efficiency of Application of Triangular Bending Finite Elements for Plate Calculation Using the Classical Mixed-Type Approach to the Finite-Element Method
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusions
	References
Practical Application of Drones and Psychology of Their Sales in Russia
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussions
	5 Conclusion
	References
Experimental Studies of the Effect of Heat Treatment on the Properties of Welded Assemblies of Working Bodies of Road Construction Machines
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Application of Thermal Cycling Treatment of Steels 09G2S and 30mnb5 to Increase the Strength of the Working Bodies of Road Construction Machines
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Modeling the Varieties of Territorial Diffusion of Innovations
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussions
	5 Conclusion
	References
Estimation of the Intensity Model Coefficient of the Emerging Breaking Radiation
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	References
Statistical Models for Intruder Detection in a Distributed Automated System
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	References
Control of Electric Devices of Electric Rolling Stock Using Microprocessor Means
	1 Introduction
	2 Methods
	3 Implementation of the Electrical Apparatus Control Subsystem Using Ethernet Technology
	4 Results
	5 Conclusions
	References
Practical Design of an Automated Cloud-Based Housing Community Management System
	1 Introduction
	2 Methodology
	3 Research
		3.1 Statistical Expectation Matrix
		3.2 Implementation of Expectations: Design and Development
		3.3 Realizing Expectations: Measuring Compliance with Expectations
	4 Conclusions
	References
Algorithms and Software for Detecting and Identifying Small-Sized Objects on Stereoscopic Images of Transport Systems Infrastructure
	1 Introduction
	2 Methods
		2.1 Methods and Algorithms of Calibration of a Stereo Camera
		2.2 Approaches for Building Stereo Images
	3 Results and Discussion
	4 Conclusion
	References
Organization Problems and Development Prospects of Parking Systems
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Digital Learning Tools and Devices for the Implementation of an Electronic Educational Resource
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Improving the Efficiency of Vehicle Operation by Defining the Organizational and Methodological Parameters of the Spare Parts Incoming Inspection System
	1 Introduction
	2 Method of Forecasting
	3 Experimental Research
	4 Conclusion
	References
System Approach to Digitalization of High-Tech Enterprises
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusions
	References
Model and Methods for Detecting Undetected Errors Using a Signature Analyzer
	1 Introduction
	2 Evaluation of the Reliability of Control of the Signature Analysis Method
	3 Analysis of Simulation Results
	4 Conclusion
	References
Strength Characteristics of Steel Structures for Marine Transport in Fire Conditions
	1 Introduction
	2 Methods
		2.1 Experimental Study of Bulkhead and Deck Structures
		2.2 Simulation of Bulkhead and Deck Structures
	3 Results and Discussion
		3.1 Results of Fire Experiments of Bulkhead and Deck Structures and Their Simulation
		3.2 Discussion
	4 Conclusions
	References
Innovation and IT Technologies as the Main Element of a Dynamic Business Model
	1 Introduction
	2 Innovation as a Core Element of a Dynamic Business Model
	3 Results of Using the Model
	4 Conclusion
	References
Multi-criteria Synthesis of Composites Using an Integrated Complex for Mathematical Modeling of Composite Materials
	1 Introduction
	2 Research Methods and Principles
	3 The Main Results
	4 Discussion
	5 Conclusions
	References
Multi-criteria Optimization Level of Customer Satisfaction by Minimizing Time Costs
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusions
	References
Solving Electrical Engineering Problems Using Mathematical Simulation
	1 Introduction
	2 Methods and Techniques
	3 Research Results
		3.1 Model of a Complex Electrical Circuit
		3.2 DC Motor Model
	4 Conclusion
	References
Approaches to the Task of Searching for Anomalies on the Conveyor Line Using Neural Networks
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	References
Autonomous Energy Systems of Maritime Structures with Semiconductor Converters and Filter-Compensating Devices
	1 Introduction
	2 Methods
		2.1 Cruise Ships
		2.2 Bulk Carriers
		2.3 Vessel Support
	3 Results
	4 Discussion
	5 Conclusions
	References
Research of Technological Parameters of Crankshaft with Journals Rebuilt by Steel Half-Ring Installation
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Maintenance (Repair) Cycle Variation Coefficient as an Indicator of the Need for Managerial Influence on the MRO Processes in Transport and Enterprises
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Efficiency of the LIFT-SLAB Method with Floor-By-Floor Arrangement of Columns
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion and Conclusions
	References
Determining the Nature of Particle Motion on the Blades of a Horizontal Drum of a Mobile Trailer
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusion
	References
Providing the Reliability of the Technological Process for Processing with a Ball-Rod Hardener During Experimental Studies
	1 Introduction
	2 Methods
	3 Results and Discussion
	4 Conclusion
	References
Express Method of Examination of Construction Units of Buildings and Structures
	1 Introduction
	2 Methods of Research
	3 Results
	4 Discussion
	5 Conclusions
	References
Organizational and Economic Transformation of the Professional Continuing Education System in the Transport Sector
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Digital Tools in Post-pandemic Education: Useful Lessons
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	References
The Use of Siliceous Opal-Cristobalite Rocks in the Construction of Transport Infrastructure Objects
	1 Introduction
	2 Methods and Materials
	3 Results
	4 Discussion
	References
The Development of a Cognitive-Learning Model for the Adaptive Digital Profile on the Basis of E-Portfolio
	1 Introduction
	2 Materials and Methods
		2.1 E-portfolio System
		2.2 Cognitive-Learning Model
	3 Results
	4 Discussion
	5 Conclusion
	References
Reliability Enhancement of the Operation of Main Pipelines in Order to Ensure the Sustainable Development of the Gas Transmission System
	1 Introduction
	2 Methods
		2.1 Analysis of Corrosion Processes in GTS Pipelines
		2.2 Application of Strengthening Technology in Welded Joints
		2.3 Application of Static Corrosion Tests
	3 Results and Discussion
	4 Conclusions
	References
Proposals for the Reconstruction and Development of the Road Network of the City of Shakhty in the Rostov Region
	1 Introduction
	2 Materials and Methods
	3 Conclusions
	References
Integration of BIM and GIS Technologies for Sustainable Development of the Construction Industry
	1 Introduction
	2 Methods and Materials
	3 Results and Discussion
	4 Conclusion
	References
Application of a Mind Mapping-Based Contextual Approach into an Individual Education of Engineers
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion and Recommendation
	References
Determining the Non-stationary Moisture Field of Materials in a Confined Medium
	1 Introduction
	2 Research Methods
	3 Experiment and Calculations
	4 Conclusion
	References
The Effect of the Activation of Aggregates with Bischofite on the Properties of Vibrated Heavy Concrete
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	References
Quality Maintenance of Prefabricated Elements of Reinforced-Concrete Mycelium
	1 Introduction
	2 Materials and Methods
	3 Research Results
	4 Conclusions
	References
The Role of Production Automation in Defect-Free Production
	1 Shoe Product Defects
	2 Analysis of Shoe Product Defects
	3 Conclusion
	References
Effects of Different Traditional Tillage and No Till Options on Soil Hardness
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusions
	References
Innovative Technologies for the Efficient Use of UAN Liquid Fertilizers: Production, Logistics and Application in Case of Lack of Moisture and Global Warming
	1 Introduction
		1.1 Relevance
		1.2 Aim of the Study
	2 Results and Discussion
	3 Conclusions
	References
Analysis of Environmental Monitoring Systems Near Large Transportation Systems
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
BI Application Development and Their Use for Logistics, Transport and Service Companies
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Investigation of Normal Fracture Cracks in an Infinite Elastic Medium
	1 Introduction
	2 Materials and Methods
	3 Results
		3.1 Setting the Boundary Value Problem
		3.2 Solving the Boundary Value Problem (1.1)–(1.8)
		3.3 Analysis of Solutions and Stress Intensity Coefficient KI
	4 Conclusions
	References
Methods for Analyzing Combinations of Wheelset Sizes and Switch Elements
	1 Introduction
	2 Materials and Methods
	3 Results and Conclusions
	References
Curved Turnouts for Curves of Various Radii
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusions
	References
Mathematical Models of the Steering Processes of Wheel Type Transport and Technological Vehicles
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
An Effective Innovative Complex of Sprayer and Multi-injector for Applying Liquid Fertilizers in One Operation and in Complex
	1 Introduction
		1.1 Relevance
		1.2 Aim of the Research
	2 Results and Discussion
	3 Conclusions
	References
Combined Unit with Automated Adjustment of the Grip Width of the Cultivator Paw
	1 Introduction
	2 The Purpose of the Research
	3 Conclusions
	References
Motivation Vectors for Choosing an Individual Educational Route in the Digital Environment
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Development of Arctic Freezing Seas by Marine Engineering Structures
	1 Introduction
	2 Materials and Methods
	3 Results
		3.1 Damage to Hydraulic Engineering Structures
		3.2 Damage to Bridge Piers
		3.3 Ship Accidents in Northern Sea Route
	4 Conclusion
	References
Robotisation Problems Related to the Maintenance of Arctic Equipment
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Interaction of AC Arc with Propane Fraction
	1 Introduction
	2 The Experimental Part
	3 Results and Discussion
	4 Conclusions
	References
Assessment of the Quality of the Results of Construction and Technical Expertise by the Dispersion Analysis Method
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	References
Evaluation of Surface Layers of Tool and Structural Steels After Laser Treatment
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Conclusion
	References
The Organization of Adaptive Control, Forecasting and Management of Electric Power Consumption of Electric Rolling Stock
	1 Introduction
	2 The Object and Methods of the Research
	3 Results
	4 Conclusions
	References
Investigation of the Surface Quality and Tool Wear When Forming the Edges of Wood Materials
	1 Introduction
	2 Materials and Methods
	3 Results and Discussions
	4 Conclusion
	References
Model of Hole Mandrel Process in Tubular Workpieces
	1 Introduction
	2 Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Increasing Durability of Press Stamps by Applying Effective Technological Lubricants and New Steel Grades
	1 Introduction. Source Analysis
	2 Methods and Results
	3 Conclusions
	References
A Comparative Assessment of Gypsum and Magnesite Composites’ Air Resistance Modified by Secondary Resources
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Use of Expanded Clay Concrete for Transportation Construction in the Far North and the Arctic
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	4 Conclusion
	References
Device for Non-destructive Testing Based on the ATmega328p Microcontroller
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusion
	References
Technology of Restoring Degraded Water Objects
	1 Introduction
	2 Materials and Methods of Research
	3 Results and Conclusion
	References
Analytical Overview of Digital Cloud Services
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Module System Developing of Computer-Aided Engineering for Process Technologies with Ball-Shaft Hardener
	1 Introduction
	2 Materials and Methods
	3 Results
	References
Investigation of the Contact Zone Between Cement Stone and Various Types of Aggregates in Concrete
	1 Introduction
	2 Objectives and Methods of Research
	3 Experimental Part
	4 Conclusion
	References
Modelling of Dynamic Characteristics of the Technological System of Mechanical Processing
	1 Introduction
	2 Materials and Methods
	3 Modelling of Natural Frequencies of Vibrations of a Technological System of Machining
	4 Results of the Research
	5 Conclusions
	References
The Basics of Using Spectral Technologies for Diagnostics and Control of Seed Stock during Storage
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	References
Theoretical Foundations of Means and Methods of Information Counteraction to Threats of Information Security Violations in an Open Computer Network of an Online Store
	1 Analysis of the Work of Payment Systems
	2 Threats to Information Resources of the Payment System
	3 Payment System Information Resources to be Protected
	4 Stages of Product Sales in the Online Store
	References
Methods and Means of Information Countermeasures to Threats of Information Security Breaches in an Open Computer Network of an Online Store
	1 Information Countermeasures to Web Vulnerabilities
		1.1 External Software Solutions of Counteraction
		1.2 Countermeasures with Passwords
		1.3 Counteraction with Program Code
		1.4 Information Security Audit Implementation
	2 Protection of Information in the Database
	3 Anti-Fraudulent Transactions
		3.1 Global Filters
		3.2 Local Filters
	References
Application of Blockchain Technologies in Digital Agriculture
	1 Introduction
	2 Materials and Methods
	3 Results
	4 Discussion
	5 Conclusions
	References
Innovative Engineering Developments of Equipment and Vending Machines
	1 Introduction
	2 Materials and Methods
	3 Results and Discussion
	References
A System for Monitoring the Effective Operation of Employee Access to Computer Systems Based on Biometric Authentication
	1 Introduction
	2 Computer and Machine Vision and Computer Training
	3 Software Product Development
		3.1 Software Architecture
		3.2 The Structure of the Software Implementation. Description of the Detection System Training
		3.3 Description of the Program
	4 Conclusion
	References
Analysis of Current Situation with Renewable Energy in Russia
	1 Introduction
	2 The Reasons for the Lag in the Development of Renewable Energy in Russia
	3 Modern Structure of Electric Energy Generation in Russia
	4 State Regulation for Renewable Energy Sources in Russia
	5 Conclusion
	References