Metallurgical Coatings and Thin Films 1992

Content: 
Front Matter, Page iii
Copyright, Page iv
Preface, Page v, BRUCE D. SARTWELL, GARY E. McGUIRE, SIEGFRIED HOFMANN
Publication schedule, Page vii
COMMITTEES, Pages xv-xix
EXHIBITORS, Page xx
Effect of substrate composition on the oxidation behavior of platinum-aluminized nickel-base superalloys, Pages 1-7, H.M. Tawancy, N.M. Abbas, T.N. Rhys-Jones
Microstructural development in aluminide diffusion coatings on nickel-base superalloy single crystals, Pages 8-12, W.F. Gale, J.E. King
Increasing high temperature oxidation and corrosion resistance of graphite and carbon-fiber-reinforced carbon by deposition of a low pressure chemically vapor-deposited silicon carbide coating, Pages 13-18, Jakob H. Scheiffarth, Brian J. Wagner, Karl Brennfleck, Wolf Huettner
Vacuum plasma sprayed alumina–titania coatings, Pages 19-24, D.J. Varacalle Jr., H. Herman, G.A. Bancke, W.L. Riggs II
Erosive wear of CVD ceramic coatings exposed to particulate flow, Pages 25-31, V. Shanov, W. Tabakoff, M. Metwally
The influence of erodent characteristics on the erosion of selected coatings at ambient and elevated temperature, Pages 32-38, Patrick N. Walsh, Robert C. Tucker Jr.
Evaluation of plasma sprayed abradable coatings, Pages 39-44, Z. Mutasim, L. Hsu, E. Wong
Thermomechanical behavior and phase relationships of plasma-sprayed zirconia coatings, Pages 45-52, Marcus P. Borom, Curtis A. Johnson
Thermal properties and microstructure of two thermal barrier coatings, Pages 53-57, Thomas A. Taylor
Compositionally graded thermal barrier coatings for high temperature aero gas turbine components, Pages 58-63, F. Jamarani, M. Korotkin, R.V. Lang, M.F. Ouellette, K.L. Yan, R.W. Bertram, V.R. Parameswaran
The effect of residual stress on martensitic transformation in plasma-sprayed ZrO2 (8 wt.%Y2O3) coatings, Pages 64-69, J.D. Lee, H.Y. Ra, K.T. Hong, S.K. Hur
Acoustic emission study of failure mechanisms in TiC thermal barrier coatings, Pages 70-76, F. Bordeaux, C. Moreau, R. G. Saint Jacques
TiN films as microlaminate reinforcements in aluminum matrix composites, Pages 77-83, J.H. Givens, J.M. Rigsbee
Microstructure and resistance to cracking of modified Al−Si and Al−Cr diffusion coatings on ŻS6K nickel-based superalloys, Pages 84-90, L. Swadźba, A. Maciejny, B. Formanek, J. Biedroń
Low pressure r.f. plasma jet—a new tool for surface processing, Pages 91-95, L. Bárdoš, S. Berg
The use of ion effects on the surface in deposition and etching of thin films and coatings, Pages 96-101, G. Kuznetsov, V. Delian
A new technique for testing the impact load of thin films: the coating impact test, Pages 102-107, O. Knotek, B. Bosserhoff, A. Schrey, T. Leyendecker, O. Lemmer, S. Esser
Corrosion studies with hard coating–substrate systems, Pages 108-114, Hermann A. Jehn, Manfred E. Baumgärtner
Preparation and characterization of V–N films deposited by reactive triode magnetron sputtering, Pages 115-120, G. Farges, E. Beauprez, D. Degout
Recent progress in the study of physically vapour-deposited coatings produced by means of highly ionized plasmas, Pages 121-130, L.M.M. Stals, C. Quaeyhaegens, M. Van Stappen
Sputter erosion amplification, Pages 131-135, S. Berg, A.M. Barklund, C. Nender, I.V. Katardjiev, H. Barankova
The deposition of thin films by filtered arc evaporation, Pages 136-142, P.J. Martin, R.P. Netterfield, A. Bendavid, T.J. Kinder
Planar magnetron-sputtering system with obliquely facing targets, Pages 143-147, Kikuo Tominaga, Hiroshi Imai, Yasuhiko Sueyoshi, Masaki Shirai
Deposition of ternary hard compounds with a graded composition by the use of a hybrid source ion-plating technique, Pages 148-153, H. Freller, H.-P. Lorenz, P. Schack
X-ray elastic constants and residual stress of textured titanium nitride coating, Pages 154-159, J.A. Sue
Examination of residual stress, morphology and mechanical properties of sputtered TiN films, Pages 160-166, F. Höhl, H.-R. Stock, P. Mayr
Effect of process parameters on the residual stresses and the wear behavior of aluminum nitride physical vapor deposition coatings, Pages 167-172, G. Kleer, R. Kassner, E.-M. Meyer, M.G. Schinker, W. Doell
Residual stress in ion-assisted coatings, Pages 173-179, S.J. Bull, A.M. Jones, A.R. McCabe
On the residual stress and picostructure of titanium nitride films I: Implantation with argon or krypton, Pages 180-185, A.J. Perry, V. Valvoda, D. Rafaja, D.L. Williamson, B.D. Sartwell
Microstructural study of the κ-Al2O3 → α-Al2O3 transformation in CVD κ-Al2O3, Pages 186-192, J. Skogsmo, M. Halvarsson, S. Vuorinen
Deposition of multilayer hard coatings using kinetically controlled chemical vapour deposition processes, Pages 193-197, K. Bartsch, A. Leonhardt, E. Wolf
Reactor design for chemical vapor deposition of tungsten carbide coatings, Pages 198-203, Diwakar Garg, C. Michael Kelly
Assessment of tetra-alkylchromium compounds for low temperature organo-metallic chemical vapour deposition of Cr-based coatings, Pages 204-210, F. Maury, F. Ossola, F. Schuster
Fundamental aspects of film nucleation and growth in chemical vapor deposition, Pages 211-218, William A. Tiller
Chemical vapor deposition in fluidized bed reactors, Pages 219-223, A. Sanjurjo, K. Lau, B. Wood
Coatings for corrosion protection of steel used in reinforced concrete, Pages 224-228, A. Sanjurjo, Samson Hettiarachchi, K.H. Lau, Philip Cox, Bernard Wood
Low pressure chemical vapor deposition of massive Si1−xGex gradient crystals and applications in short-wavelength diffraction, Pages 229-233, R. Madar, E. Mastromatteo, A. Magerl, K.-D. Liss, C. Bernard
Aluminum and alumina coatings on copper by chemical vapor deposition in fluidized bed reactors, Pages 234-240, K.H. Lau, A. Sanjurjo, B.J. Wood
Multicomponent and multilayer physically vapour deposited coatings for cutting tools, Pages 241-248, O. Knotek, F. Löffler, G. Krämer
Arc-evaporated Ti–V–N thin films, Pages 249-254, O. Knotek, W. Burgmer, C. Stoessel
Ti–B–N coatings deposited by magnetron arc evaporation, Pages 255-260, M. Tamura, H. Kubo
Crystal structure of molybdenum nitride films made by reactive cathodic arc evaporation, Pages 261-265, A.J. Perry, A.W. Baouchi, J.H. Petersen, S.D. Pozder
Microstructural and tribological study of triode magnetron sputtered V–C coatings: influence of partial pressure of reactive gas, Pages 266-272, M.C. Sainte-Catherine, G. Farges
Decorative properties and chemical composition of hard coatings, Pages 273-278, Georg Reiners, Harald Hantsche, Hermann A. Jehn, Uwe Kopacz, Andreas Rack
Interface study of physically vapour-deposited TiN coatings on plasma-nitrided tool steel surfaces with Auger electron spectroscopy, resonant nuclear reaction analysis and Rutherford backscattering spectroscopy, Pages 279-286, C. Quaeyhaegens, M. Van Stappen, L.M. Stals, F. Bodart, G. Terwagne, R. Vlaeminck
Growth and properties of hard coatings prepared by physical vapor deposition methods, Pages 287-296, Stanislav Kadlec, Jindřich Musil, Jiří Vyskočil
The coating of internal surfaces by PVD techniques, Pages 297-302, J.A. Sheward
High resistivity AlOx thin films deposited by a novel two-step sputtering process, Pages 303-307, S. Tokumaru, M. Hashimoto
Sputtered yttria partially stabilized zirconia layers applied to thin film heat fluxmeters, Pages 308-314, J.C. Godefroy, M. Cléry, C. Diot, P. Kayser, C. Gageant
Impurities in ion plated chromium films, Pages 315-319, J.H. Hsieh, R.F. Hochman
Sputtered silver and Cr–C films for applications as interconnect materials, Pages 320-323, N. Maréchal, Y. Pauleau, S. Païdassi
Structure and mechanical properties of hard W–C coatings deposited by reactive magnetron sputtering, Pages 324-328, Y. Pauleau, Ph. Gouy-Pailler, S. Païdassi
Sputter deposition of decorative coatings based on ZrB2 and ZrB12, Pages 329-334, C. Mitterer, P. Losbichler, W.S.M. Werner, H. Störi, J. Barounig
Ion-beam deposition of Zr–Al multilayers and their structural properties, Pages 335-337, S.B. Qadri, C. Kim, M. Twigg, D. Moon
Fundamental mechanisms of titanium nitride formation by d.c. magnetron sputtering, Pages 338-342, F. Richter, H. Kupfer, H. Giegengack, G. Schaarschmidt, F. Scholze, F. Elstner, G. Hecht
Thin film deposition techniques utilizing the anodic vacuum arc, Pages 343-348, S. Meassick, C. Chan, R. Allen
Working gas pressure and flow effects on reactively sputtered molybdenum oxide thin films, Pages 349-354, A.F. Jankowski, L.R. Schrawyer
Effect of deposition parameters on the formation of cubic BN films deposited by plasma-assisted chemical vapour deposition from non-toxic material, Pages 355-359, M.Z. Karim, D.C. Cameron, M.S.J. Hashmi
Growth and characterization of C–N thin films, Pages 360-364, Ming Y. Chen, X. Lin, V.P. Dravid, Y.W. Chung, M.S. Wong, W.D. Sproul
Increase in nucleation density of diamond film growth by d.c. plasma chemical vapor deposition, Pages 365-367, Yukinobu Hibino, Yasuaki Hayashi
The role of hydrogen in diamond synthesis from carbon dioxide–hydrocarbon gases by microwave plasma chemical vapor deposition, Pages 368-373, Chia-Fu Chen, Tsao-Ming Hong
Synthesis of diamond thin films through a transformation of a catalytically produced diamond precursor phase, Pages 374-379, Baybars Oral, Anders Flodström
The effect of noble gases on the formation of CVD diamond film, Pages 380-386, H.C. Shih, C.P. Sung, W.L. Fan
Crystallite geometry of hot filament chemical vapor deposited diamond, Pages 387-391, W. Brock Alexander, Paul H. Holloway, L. Heatherly, R.E. Clausing
Diamond film growth on cemented tungsten carbides studied by SEM, AES and XPS, Pages 392-396, J.L. Chen, T.H. Huang, F.M. Pan, C.T. Kuo, C.S. Chang, T.S. Lin
Formation of diamond films from low pressure radio frequency induction discharges, Pages 397-402, R.A. Rudder, G.C. Hudson, R.C. Hendry, R.E. Thomas, J.B. Posthill, R.J. Markunas
Diamond coating using multiple flame torches in an atmospheric chamber, Pages 403-407, Masao Murakawa, Sadao Takeuchi
Diamond synthesis in supersonic direct-current arcjet plasma at subtorr pressures, Pages 408-413, Michael H. Loh, Mark A. Cappelli
Investigation of the early stages of diamond film growth by ellipsometric monitoring, Pages 414-417, Yasuaki Hayashi, Yukinobu Hibino
Adhesion and structure of c-BN films produced by ion-beam-assisted deposition, Pages 418-422, N. Yamashita, T. Wada, M. Ogawa, T. Kobayashi, H. Tsukamoto, T. Rokkaku
Effects of surface composition, environment and morphology on friction and wear: an overview, Pages 423-427, Yip-Wah Chung
Friction and wear of diamond and diamondlike carbon coatings, Pages 428-434, Kazuhisa Miyoshi, Richard L.C. Wu, Alan Garscadden
Applications of solid lubricant films in spacecraft, Pages 435-441, M.R. Hilton, P.D. Fleischauer
Aluminum metal matrix composites tailored for antifriction applications, Pages 442-446, S.V. Prasad
Microstructure and tribological behaviour of plasma immersion ion implanted tool steels, Pages 447-452, M. Samandi, A. Pauza, G. Hatziandoniou, H. Yasbandha, R. Hutchings, G.A. Collins, J. Tendys
Performance and wear of carbide coated by physical vapour deposition in interrupted cutting, Pages 453-458, W. König, R. Fritsch
A comparison of the tribological behaviour of several wear-resistant coatings, Pages 459-465, S.E. Franklin, J. Beuger
Study of the relative wear and abrasion resistance of Ti(C,N) and TiN coatings, Pages 466-469, Syamal K. Ghosh, Mark S. Kohler
New ways towards better exploitation of physical vapour deposition coatings, Pages 470-475, W. König, D. Kammermeier
Substrate- and interface-related influences on the performance of arc-physical-vapour-deposition-coated cemented carbides in interrupted-cut machining, Pages 476-481, O. Knotek, F. Löffler, G. Krämer
Rolling-contact fatigue and wear resistance of hard coatings on bearing-steel substrates, Pages 482-489, Ali Erdemir
Scuffing behavior of TiN-coated steel rollers under rolling and sliding conditions, Pages 490-495, T.P. Chang, M.E. Graham, W.D. Sproul, H.S. Cheng
Tribological behavior of oil-lubricated TiN-coated steel, Pages 496-501, O.O. Ajayi, A. Erdemir, G.R. Fenske, F.A. Nichols, W.D. Sproul, M. Graham, P.J. Rudnik
Properties of TiN coatings deposited onto hot work steel substrates plasma nitrided at low pressure, Pages 502-507, T. Gredić, M. Zlatanović, N. Popović, Ž. Bogdanov
Effects of nitrogen ion implantation on the mechanical properties of laser-deposited thin films of TiC and TiN on stainless steel, Pages 508-515, A.V. Kulkarni, Nitant Mate, S.M. Kanetkar, S.B. Ogale, B.G. Wagh
Surface modification and wear characteristics of yttria-doped zirconia, Pages 516-520, Dilip Chatterjee, Debasis Majumdar, Syamal Ghosh
Some tribological observations of sliding tungsten carbide coated steel against aluminum, Pages 521-528, A.J. Stavros, J.V. Reid
Erosion and erosion–corrosion behavior of chromized–siliconized steel, Pages 529-535, B.Q. Wang, G.Q. Geng, A.V. Levy
Physical vapour deposition coatings for dental prostheses, Pages 536-540, O. Knotek, F. Löffler, K. Weitkamp
The morphology and mechanical properties of Al2O3, ZrO2 and SiC laser-assisted physically vapour deposited films, Pages 541-547, H. Sung, G. Erkens, J. Funken, A. Voss, O. Lemmer, E.W. Kreutz
Multilayer Ti–Cu sputter films for the Gravity Probe B gyroscope housings, Pages 548-551, P. Zhou, S. Buchman, K. Davis, C. Gray, J.P. Turneaure
Properties of sputter-deposited hydrogenated carbon films as a tribological overcoat used in rigid magnetic disks, Pages 552-556, H.J. Lee, J.K. Lee, R. Zubeck, M. Smallen, D. Hollars
Nanoindentation and microindentation studies of hard carbon on 304 stainless steel, Pages 557-562, Teresa Wright, Trevor F. Page
Tribological properties of hard carbon films: extremely low friction mechanism of amorphous hydrogenated carbon films and amorphous hydrogenated SiC films in vacuum, Pages 563-569, S. Miyake
Tribological properties of hard carbon films produced by the pulsed vacuum arc discharge method, Pages 570-575, H. Ronkainen, J. Likonen, J. Koskinen
Physical and tribological properties of rapid thermal annealed diamond-like carbon films, Pages 576-580, Richard L.C. Wu, Kazuhisa Miyoshi, Rama Vuppuladhadium, Howard E. Jackson
Protective coatings of amorphic diamond on fragile and sensitive substrates, Pages 581-585, T.J. Lee, H. Park, J.H. You, F. Davanloo, C.B. Collins
Industrial sputter coating of large stainless steel sheets, Pages 586-589, D. Hofmann, S. Shiotani
Maskless laser etching of kerfs in ceramic materials for applications in magnetic recording heads slider fabrication, Pages 590-593, Jamal Khan
The in-line arc ion-plating system for high throughput processing of automobile parts, Pages 594-598, H. Tamagaki, K. Tsuji, T. Komuro, F. Kiyota, T. Fujita
Adherent metallization of carbon-fibre-reinforced plastic composites using a combined vacuum/electrochemical deposition process, Pages 599-603, J. Fessmann, D. Mann, G. Kampschulte, F. Leyendecker, T. Bolch, K. Mertz, D. Jonke, F.J. Gammel, M. Meyer, R. Suchentrunk
Development of mass-production-type plasma chemical vapour deposition equipment and its application to various dies, Pages 604-608, Kazuki Kawata
Author Index of Volume 54/55, Pages 609-610
Subject Index of Volume 54/55, Pages 611-617