Mechanics of Structures and Materials XXIV: Proceedings of the 24th Australian Conference on the Mechanics of Structures and Materials (ACMSM24, Perth, Australia, 6-9 December 2016)

Content: VOLUME 1   Keynote submissions   Strength design of high-strength steel beams  M.A. Bradford & X. Liu   Physical, chemical and microbiological processes in the long term corrosion of steel and cast iron infrastructure  R.E. Melchers   Are seismically designed buildings inherently more resistant to progressive collapse?  D.A. Nethercot & C.A. Vidalis   Materials technology research to structural design of geopolymer concrete  J.G. Sanjayan   Maintenance and condition monitoring
 multi-model and hybrid approach to SHM  A. De Stefano   VLFS technology for land creation on the sea  C.M. Wang   General submissions   Reinforced and prestressed concrete structures   Axially loaded three-side restrained reinforced concrete walls: A comparative study  N.M. Ho, M.M. Lima & J.H. Doh   Experimental investigation on the FRP-confined and unconfined concrete containing high rubber content  R. Hassanli & O. Youssf   Effect of steel fibre on thermal behavior of concrete under elevated temperature  X. Liang & C.Q. Wu   Analysis of bridge abutment movement through a case study  M. Rashidi, B. Samali & S. Kempton   Early-age tensile creep and drying shrinkage in GGBFS concrete  I. Khan, A. Castel & R.I. Gilbert   Study of disturbed strain regions for serviceability analysis of cracked RC flexural members  A. Murray, R.I. Gilbert & A. Castel   Image analysis method used in the seismic rehabilitation of squat reinforced concrete shear walls using CFRP sheets  J.E. Woods, D.T. Lau & Y.S. Yang   The effect of different shapes of shear keys at the interface of old and new concretes of jacketed RC column  M.R. Alam, P.K. Sarker, M. Rahman & S.H. Himel   Performance of damaged RC beams repaired and/or strengthened with FRP sheets: An experimental investigation  T. Imjai & R. Garcia   Post-yield bond behavior of reinforcing bars embedded in concrete under axial loading up to fracture  J. Yu, K.H. Tan & N.S. Lim   Eliminating shrinkage in tension stiffening model of concrete beams by the hybrid approach  G. Kaklauskas, P.L. Ng & V. Gribniak   Numerical modelling of cracked RC tension members using stress-transfer approach  G. Kaklauskas, P.L. Ng, R. Jakubovskis & R. Ramanauskas   Finite element modelling of concrete filled steel tubes subjected to static pure bending  A. Karrech, M. Elchalakani & H. Basarir   Experimental study on the tensile and bending creep behavior of cracked UHP-FRCC  T. Nishiwaki, H. Otaki, G. Igarashi, S. Kwon, F. Shaikh & A.P. Fantilli   Screw anchors installed in early age concrete  A. Mohyeddin, E. Gad, R. Khandu, K. Yangdon, J. Lee & M. Ismail   Steel and composite structures   Analysis of demountable steel column-baseplate connections under monotonic loading  D. Li, B. Uy, F. Aslani & V. Patel   Rigorous method for flexural design of reinforced concrete members  Y.F. Wu   Behaviour of load carrying precast concrete sandwich panels under various supporting conditions  E. Hamed   Shear buckling of composite plates on tensionless elastic foundations  J. Dong, X. Ma, J.E. Mills & Y. Zhuge   Asset management of steel bridges  M. Rashidi, B. Samali, A. Azad & H. Hatamian   Bond deterioration between near-surface mounted carbon FRP strips and concrete under moisture conditions  H. Aydin, R.J. Gravina & P. Visintin   Fatigue tests on notched steel beams strengthened with CFRP laminates  Q.Q. Yu & Y.F. Wu   Galvanic corrosion behavior of the welding of stainless steel and carbon steel  Y. Miyazaki & K. Komi   Effects of floor slabs on the structural performance of blind-bolted composite joints  M.K. Hassan, Z. Tao, T.Y. Song & L.H. Han   Simplified numerical modelling of circular concrete-filled steel tubular stub columns  U. Katwal, Z. Tao, M.K. Hassan & W.D. Wang   Analysis of mechanical behaviour of circular concrete filled steel tube columns using high strength concrete  H.D. Phan & H.H. Trinh   Behaviour of composite sandwich beams with different shear span-to-depth ratios  W. Ferdous, A. Manalo & T. Aravinthan   Behavior of pultruded multi-celled GFRP hollow beams with low-strength concrete infill  M. Muttashar, W. Karunasena, A. Manalo & W. Lokuge   Effects of fibre location and density on the flexural toughness in FRC beams  M. Manca, D. Ciancio & P. Dight   Process-induced deformation of composite I-shaped stiffened structures  C. Dong & J. Pitt   Global stability investigation on welded Q460GJ structural steel unrestrained beams under three-point bending tests  B. Yang, G. Xiong, Y. Zhang, S.D. Nie & M. Elchalakani   System transformation scheme and construction control method for self-anchored suspension bridge with steel-concrete composite girder  T.P. Wang, X.Y. Zhou, G.J. He & J. Yi   A comprehensive study on corrosion and hydrogen embrittlement of low carbon steel  L. Li, M. Mahmoodian, C.Q. Li & S.W. Zhou   Structural mechanics, computational mechanics, fracture and damage mechanics   Finite element analysis of the crushing behaviour of aluminium honeycombs under combined compression-shear loads  A.A. Ashab, D. Ruan & G.X. Lu   An adaptive elastic scaled boundary finite element approach for limit analysis of structures  A. Mellati, C. Song, F. Tin-Loi & S. Tangaramvong   Stress intensity factors for inclined cracks in pipes under axial tension and bending  G.Y. Fu, C.Q. Li & W. Yang   Scaled boundary finite element method for exterior acoustic-structure interaction analyses  L. Liu, C. Song, W. Gao & C. Birk   A discrete framework for fracture simulation based on the embedment of strong discontinuities with minimum degrees of freedom  D. Dias-da-Costa & G. Ranzi   Numerical modelling of concrete beams at serviceability conditions with a discrete crack approach and non-iterative solution-finding algorithms  D. Dias-da-Costa, R.N.F. do Carmo & R. Graca-e-Costa   New method to investigate the permeability of stressed concrete  M.D. Wimalasiri, D.J. Robert & C.Q. Li   Unified uncertain stability analysis of structures  W. Gao, D. Wu & F. Tin-Loi   Discrete element modelling of fracture in quasi-brittle materials  N.H.T. Nguyen, H.H. Bui, J. Kodikara, S. Arooran, G.D. Nguyen & P. Jitsangiam   Inelastic analysis of steel concrete composite beams based on a higher order beam theory  A.H. Sheikh, M.A. Uddin & J. Wen   An analytical approach to determine the span and fracture positions of roof strata prior to rock burst  S.T. Ji, C.W. Zhang & K.Z. Zhang   Stress analysis of STL models by octree mesh and scaled boundary finite element method  Y. Liu, A.A. Saputra & C. Song   Effect of corrosion influencing factors of cast iron pipes in clay soil  W.G. Wang, D.J. Robert, A. Zhou & C.Q. Li   Analysis of nano-beams with influences of surface stresses and nonlocal elasticity  T.B. Nguyen, J. Lawongkerd & J. Rungamornrat   An efficient finite element model of bolted disk-drum joints in aero-engine  Z.Y. Qin & F.L. Chu   Crack breathing as a function of crack location under the effect of unbalance force  H.M. Mobarak & H. Wu   Multicomponent tensile buckling  I.T. Hossain, F. Guillard & I. Einav   An insight into equivalent strut modelling of infill-RC frames  A. Mohyeddin, S. Dorji, E. Gad & H. Goldsworthy   Civil engineering materials   Workability and compressive strength properties of high strength geopolymer mortars  M.Z.N. Khan, F. Shaikh, Y.F. Hao & H. Hao   Experimental study on optimizing the crumb rubber concrete mechanical performance  O. Youssf & R. Hassanli   Steel fibre reinforced concrete: From X-ray imaging observation to modelling  T.S. Ng, T.N.S. Htut & S.J. Foster   Comparative performance of alkali-activated slag and fly ash at elevated temperatures  Z. Pan, Z. Tao, Y.F. Cao, N. Bajracharya, T. Murphy & R. Wuhrer   Effects of elevated temperature curing of brown coal fly ash geopolymer  R. Dirgantara & D.W. Law   Structural behaviour of UHPFRC short and slender columns subjected to axial and eccentric loads  M.S. Mohamed Ali, M. Singh & A.H. Sheikh   The effect of aluminium reaction on formation mechanism and structural properties of geopolymers  A. Hajimohammadi, T.D. Ngo & P. Mendis   Comparison of creep behaviour of geopolymer concrete and OPC concrete  C.H. Un, J.G. Sanjayan & R. San Nicolas   Experimental investigation of water vapour sorption isotherms and microstructure of low calcium geopolymer binders  J.M. de Burgh, I.M.A. Al-Damad & S.J. Foster   Influences of graphene oxide on electrical resistivity development of Portland cement paste  W.G. Li, Z.Y. Luo, C. Long, W.H. Duan & S.P. Shah   A novel composite material of A356 aluminum alloy reinforced with alumina (Al2O3) powder for automobile construction industries  S. Numsarapatnuk, T. Imjai & W. Insorn   Investigation of equivalent frame modelling for seismic analysis of unreinforced masonry buildings with flexible diaphragms  Y. Nakamura, H. Derakhshan, A.H. Sheikh, M.C. Griffith & J. Ingham   Design of alkali activated concrete using the Taguchi method  N.A. Farhan, M.N. Sheikh & M.N.S. Hadi   Mechanical behavior of a new Polyvinyl Alcohol fiber reinforced Engineered Cementitious Composite (PVA-ECC) using local ingredients  D. Meng, C.K. Lee & Y.X. Zhang   Analytical study on material properties of fibre reinforced cementitious composites  H. Tian, Y.X. Zhang, Y.H. Cui & C. Yang   Controlling the setting time of pavement concrete using accelerating-admixture by silica fume technology  N.H. Hai & T.V. Mot   Direct tensile test of high strength concrete with and without steel fibres  H.A. Hasan, F. Alhussainy, M.N. Sheikh & M.N.S. Hadi   Influence of steel, glass and hybrid fibres on the behaviour of reactive powder concrete  A.H.M. Algburi, M.N. Sheikh & M.N.S. Hadi   Laboratory tests of the pull-out behaviour of spiral shaped steel fibres from concrete matrix  Y.F. Hao & H. Hao   A novel numerical method for simulations of leaching of cementitious materials in ammonium nitrate solution  Y. Yu & Y.X. Zhang   Estimation of elastic modulus of cementitious materials under external sulfate attack  Y. Yu & Y.X. Zhang   Shock and impact loading   Confinement efficiency of concrete cylinders wrapped with different types of FRP under impact loads  T.M. Pham & H. Hao   Implosive demolition of tall masonry and concrete chimney stacks within a designed footprint  G.J. McKenzie, B. Samali & C.W. Zhang   Multi-hazard resistance capacity of precast segmental column with post-tensioning tendon under impact and cyclic loading  X.H. Zhang, H. Hao & C. Li   Development of an anchor system for seismic and blast retrofit of reinforced concrete structures using FRP sheets  J.E. Woods & D.T. Lau   Study on dynamic characteristics of pre-damaged rock under impact loading  S. Liu & C.W. Zhang   FBG based strain monitoring of reinforced concrete blast walls under high-velocity bullets penetration  Q.H. Zhang, Y. Wang, Y.Y. Sun, L. Gao, J.L. Duan, Z.L. Zhang, X.D. Huang, Z.W. You, F.J. Rong & Z.S. Chen   Research on SHM of concrete based on FBGs without coating under explosion load  Y.Y. Sun, Q.H. Zhang, L. Gao, J.L. Duan, Y. Wang, Z.L. Zhang, X.D. Huang & Z.W. You   The effect of shear and bending capacities on impact behavior of RC beams  P. Wongmatar, C. Hansapinyo, K.M. Bi & V. Vimonsatit   Experimental study on steel wire mesh reinforced concrete slabs against close-in detonations  J. Li & C.Q. Wu   Experimental study of steel wire mesh reinforced structural insulated panels against windborne debris impact  W.S. Chen, H. Hao & Q.F. Meng   Numerical analysis of human body motion under explosion  P.W. Sielicki & T. Gajewski   Fatigue damage of V-lock chain ring for mining under random load  Q. Zhang & H.J. Wang   Ballistic performance of plymetal structure produced by direct metal deposition  S.H. Masood, D. Ruan & P. Rajapatruni   Impact responses of aluminium foam sandwich panels with fibre metal laminate skins  C.J. Liu & Y.X. Zhang   Design of a hybrid composite anti-ram bollard against impact  P. Tran, S. Linforth, R. Lumantarna & T.D. Ngo   Isogeometric analysis of functionally graded plates based on a new polynomial displacement field  T.N. Nguyen, P. Tran & T.D. Ngo   Design optimisation of auxetic composite structures under blast loading  G. Imbalzano, P. Tran, S. Linforth, T.D. Ngo, P.V.S. Lee & P. Mendis   Earthquake loading, traffic and other man-made loadings   Effect of partially infill wall on the seismic behavior of RC frame buildings  K. Thinley & H. Hao   Large-scale testing of bridge system with unseating mitigation devices under spatially varying ground motions  B. Shrestha, H. Hao, K.M. Bi, L.X. He & W.X. Ren   Seismic performance of FRPs reinforced concrete filled steel tube  C.Y. Zhu, L. Sun & Y.H. Zhao   Experimental and numerical analyses on dynamic properties of materials in shaking table test  H. Zhang, H.N. Li, D.B. Wang & M. Li   Dimensional analysis of pounding effect between adjacent inelastic oscillators  S. Jiang, C.W. Zhang & B. Mou   Simulation of three-component seismic motions at seafloor using onshore earthquake recordings  C. Li, H.N. Li, K.M. Bi & H. Hao   Response uncertainty under varying orientations of ground motions  Z. Alam, C.W. Zhang & B. Samali   Earthquake-resistant performance of a steel frame model with inverse-chevron buckling restrained braces  Y. Xu, H. Guan, H. Karampour, Y.-C. Loo & X.J. Zhou   Nonlinear dynamics analysis of a cracked beam subjected to combined harmonic excitations by precise integration method  C.C. Cui, J.K. Liu & Y.M. Chen   Simplified fatigue assessment for earthquake losses: Cycle counting and fragility analysis to quantify damage  J.B. Mander, G.W. Rodgers & D. Whittaker   Problematic issues surrounding footfall excitation of floor slabs in buildings  L. Nguyen & N. Haritos   Study on the design method of story stiffness in the reinforced concrete dual structural systems  W.X. Xu, W.S. Yang, J.G. Zhang & D.H. Yu   Numerical simulation and experimental study for smart isolation control system based on LQR algorithm  W.Q. Fu, W.Q. Tang & C.W. Zhang   Dynamic modeling of magnetorheological elastomer base isolator based on extreme learning machine  Y. Yu, Y. Li, J. Li, X. Gu & S. Royel   A metric to measure the resilience of communities based on the seismic performance of buildings: A CBD perspective  Q. Tao & Z. He   Effect of damping on progressive collapse performance of structures  J. Yu & C. Yin   Mode-based equivalent method for seismic response analysis of soil column  C. Li, Y. Yuan, J.Y. Yuan & H.T. Yu   Uncertain dynamic instability analysis of column subject to axial load  Y. Huang, A. Liu, D. Wu & W. Gao   Structural health monitoring and damage identification, structural reliability and optimization   Fiber Bragg Grating monitoring in the gravel soil landslide experiment  Y. Wang, L. Gao, Y.Y. Sun, Q.H. Zhang, J.L. Duan, Z.L. Zhang, X.D. Huang & Z.W. You   Automation processing realization of internal force monitoring information of supporting structure of foundation pit  L. Gao, Y. Wang, J.L. Duan, Y.Y. Sun, Q.H. Zhang, X. Rong, Z. Xiong & C. Ma   Stress response and damage of a masonry structure subjected to ground motion induced by tunnel blasting using modal analysis method  X. Guan, C.W. Zhang, P. Zhang, X. Wang & Z. Yang   Development of an optimum maintenance strategy for infrastructure  H. Baji, C.Q. Li & M. Mahmoodian   Repair of corroded steel pipelines using CFRP  M. Elchalakani & A. Karrech   Vibration and structural performance of PC deteriorated girder under varying environmental conditions  M.T. Ha & S. Fukada   Temperature-based stiffness identification of Que-Ti\'s in a historic Tibetan timber building  Q.S. Yang, M.N. Lyu & X.Q. Zhu   Study of ultrasonic guided waves inspection for arch bridge suspender cables based on SAFE  P.F. Zhang, Z.F. Tang, F.Z. Lv, K.J. Yang & X.Y. Jiang   Performance framework for modular construction  L. Pham, E. Gad, S. Fernando & K. Hargroves   Close-range photogrammetry for accurate deformation distribution measurement  J.J. Wang, N. Gowripalan, J. Li & V.V. Nguyen   Soil mechanics, foundation engineering and pavement technology   Fire-damaged flexible pavement deterioration under dynamic loading: A finite element study  S. Fragomeni & R.C. van Staden   Full-depth flexible pavement performance impacted by rainfall: Finite element analysis  R.C. van Staden, S. Fragomeni & Y. Chen   Numerical simulation of shear band on gradient plastic theory  S. Hou, S. Guo & X. Du   Dynamic soil-bridge interaction for incident plane waves  S.L. Chen & J. Jin   A constitutive model for size dependent behaviour of soils  D.G. Phan, G.D. Nguyen & H.H. Bui   Approach for calculating the stress response of transversely isotropic stratified soil  Z.J. Han, X.W. Zhou & G. Lin   Flexural behaviour of concrete pavements reinforced with geogrid materials  A.S. Al-Hedad & M.N.S. Hadi   Investigation of water seepage in multi-storey buildings by vibration measurements and moisture monitoring  S.S.E. Lam, J.L. Fu, V. Wong & T.H.T. Chan   Effects of particle shape on the collapse behaviour of a coarse grain material  R. Mahinroosta, V. Oshtaghi & M. Li   Experimental study on multi-layer composite pavement system under drop weight impacts  J. Wu, X. Liu & C.W. Zhang   Coastal and offshore structures, wave and wind loading   Microstructural effect on the marine corrosion of low-carbon steel weldments  I.A. Chaves & R.E. Melchers   On collapse of pipe-in-pipe systems under external pressure  H. Karampour, M. Alrsai, H. Guan & F. Albermani   Anti-roll motions control of semi-submersible platform using tuned rotary inertia damper system  H. Liang, C.W. Zhang & L. Li   In-plane crashworthiness of chiral honeycombs  D. Gao & C.W. Zhang   Natural frequency and sensitivity analysis of tripod foundation for offshore wind turbine  J.H. Zhang, Q.Y. Wang, C.W. Zhang & D.W. Gao   Fragility curves of existing offshore platforms against storm loads using Endurance Wave Analysis (EWA)  M. Zeinoddini, H.M. Nikoo & Y. Yaghubi   Non-linear irregular wave interaction with a tripile foundation  R. Mo, M. Li & H.G. Kang   Thermal effects and fire engineering   Tensile and shear behaviour of Hollo-Bolts at elevated temperatures  Z. Tao, T.Y. Song & A. Razzazzadeh   Effect of calcium aluminate cement on workability and compressive strength of fly ash geopolymer mortar cured at ambient temperature  Y.F. Cao, Z. Tao, Z. Pan, T. Murphy & R. Wuhrer   Study of class G well cement behavior under triaxial compression and flexure tests  E. Arjomand, T. Bennett & G.D. Nguyen   An investigation into the effect of exposed timber on thermal load  C. Gorska Putynska, A. Law & J. Torero   Fire performance of cold-formed steel stud walls lined with calcium silicate boards  A.D. Ariyanayagam & M. Mahendran   An investigation into temperature gradient effects on concrete performance at elevated temperatures  Q.X. Le, V.T.N. Dao, C. Maluk, J. Torero & L. Bisby   Efficiency of different intensity measures for probabilistic fire engineering  M. Shrivastava, A.K. Abu, R.P. Dhakal & P.J. Moss   Effect of transient thermal strain on the stability of shallow concrete arches  Y. Bouras & Z. Vrcelj   Spalling of concrete structural walls exposed to fire  M. Hedayati, M. Sofi, P. Mendis & T.D. Ngo       VOLUME 2   Mini-symposiums   Young experts mini-symposium on structural health monitoring   Sensor fault detection for structural health monitoring using dynamic independent component analysis  H.B. Huang, T.H. Yi & H.N. Li   Structure damage identification method based on statistical characteristics of the structural vibration response  J.X. Yang, J.Q. Shu & L. Huang   Steel bar corrosion monitoring based on encapsulated piezoelectric sensors  Y. Xu, J. Zhou & Y.F. Zhao   A performance-based service life design method for reinforced concrete structures under chloride environment  D.H. Yang, T.H. Yi & G.P. Li   Modal frequency-ambient condition pattern recognition by a novel machine learning algorithm  H.Q. Mu, K.-V. Yuen & S.-C. Kuok   Dynamic loading test and numerical simulation on reinforced concrete members  G.X. Fan, H.Y. Guo, S.T. Yang, D.B. Wang & H. Zhang   A LC oscillation method for stress measurement of steel strands  B.N. Zhang, X.X. Li, C. Yuan & Z.M. Chen   Analytical global sensitivity analysis for parameter selection in finite element model updating  H.P. Wan & W.X. Ren   A condition assessment method for the time-variant seismically isolated structure  Y. Ding & L.N. Guo   Power Spectral Density Transmissibility (PSDT): An effective tool towards operational modal analysis insensitive to natural excitation  W.J. Yan, Q. Sun & W.X. Ren   Impact load identification for composite structures using Bayesian regularization and artificial bee colony algorithm  G. Yan & H. Sun   Damage localization of long-span bridges based on stress influence lines and information fusion technique and its validation  W.B. Yang, Z.W. Chen, Q.L. Cai, S.Y. Zhu & Q.F. Cheng   CCD deflection monitoring system for Songjiazhuang cloverleaf junction  B.H. Shan, L. Wang, X.Y. Huo, W.T. Yuan, Z.L. Xue & J.P. Ou   Dynamic condensation approach to finite element model updating of large-scale structures  S. Weng, W. Tian, H.P. Zhu, F.N. Li & Y. Xia   Study about optical fiber force-testing ring for bridge cable force monitoring  S.Y. Li, X.F. Zhao & D.S. Li   Behaviors prediction of pre-pressed spring self-centering energy dissipation brace  L.H. Xu, X.W. Fan & Z.X. Li   Impact behavior of corroded RC beams  O. Yang & M.J. Dai   Design and application of structural health monitoring system for Dalian gymnasium  L. Ren, T.H. Yi & H.N. Li   Stationarity test of vibration signals with time-frequency surrogates  Z.C. Wang, F. Wu & W.X. Ren   Structural damage detection from a new damage index formed from displacement response  X.Y. Li & K. Huang   Mechanical behavior investigation of a novel 3D isolator made of shape memory alloy pseudo-rubber  S.C. Li, H. Xu, H. Li, C.X. Mao & G.B. Zhao   Structural damage detection using residual force and ICA  Z.H. Ding, Z.R. Lv & J.K. Liu   Artificial bee colony algorithm for structural damage identification in axially functionally graded beams  R.Z. Yao, J.K. Liu & Z.R. Lu   Structural damage identification of a bridge from a passing test vehicle using frequency domain method  Y. Yang & B.Y.L. Jia   Study on the two points-pasted reinforcement corrosion monitoring method based on FBG  L. Sun, C.Y. Zhu, C. Chen & J. Li   Numerical analysis and experimental study on ice-induced vibration of jacket ocean offshore platform with rocking column  J.G. Zhang & F.F. Liu   Fatigue cracking identification of reinforced concrete bridges using vision-based sensing technology  X.W. Ye & C.Z. Dong   Experimental study on structural measurements analysis for finite element model updating  H. Song, B. Wu & L.R. Zhou   The study on the durability of GFRP rebars when sustaining load  J.W. Tu, A. Almansoor & D.L. Guo   Development of Elasto-Magneto-Electric (EME) sensor for steel cable force monitoring  R. Zhang, Y.F. Duan, Y. Zhao, Y.Z. Luo, S.W. Or & K.Q. Fan   Deflection identification of a pre-stressed concrete continuous beam bridge  Z. Chen, Y.D. Tian, Q. Xia, P.J. Li, Y.F. Zhang, Z.S. Wu & J. Zhang   Monitoring and seismic response analysis of long irregular base-isolated structure including temperature effect  W.R. Li, W.Z. Zheng, Y.F. Du, H. Li & H. Wang   Slope stability analysis and early warning via WSN technique  Z. Lu, C.Y. Liu, X.S. Han & J.D. Peng   The effects of service environment on health monitoring of concrete structures using smart aggregates  D.J. Zou, C.C. Du & T.J. Liu   Long-term performance analysis of structural key elements using monitoring data  W. Lu, L.H. Qiu & J. Teng   Structural health monitoring and performance evaluation of a large diameter bored pile with distributed fiber optic sensors  D.S. Xu   Effect of seismic duration and safety margin on structural dynamic reliability  Z.H. Zhang, X.Y. Wu & W.J. Yang   Damping effect on vortex-induced vibration of stay cable using cross ties installed with damper  M. Liu & W.H. Yang   Study on damage diagnosis indices fusion for long-span suspension bridges under ambient vibration  J.J. Zhu, L.X. Wang, H. Jiang & X.Y. Li   Stochastic modelling of fatigue crack evolutions in composite blades of offshore wind turbines  C. Zhang & H.P. Chen   Compressive sensing system based on random demodulation for structural health monitoring  D. Liang, X. Li & Z.F. Fan   Guided wave-based structural health monitoring of the full-scale composite aircraft tail in static test  Y.S. Wang, H. Sun & X.L. Qing   Study on resisting-high-strain performance of piezoelectric transducer  H. Sun, Y.S. Wang & X.L. Qing   Entropy change research of concrete cracking evolution based on dissipative structure  C.S. Xiang, F.C. Mao, J.S. Cheng, Y. Zhou, M.D. Li & L.X. Wang   System identification of an in-service utility-scale wind turbine tower for vibration-based structural health monitoring  K.S. Dai, Y. Wang, Y. Xu, W. Zhu & J. Liu   Damage identification of simply supported beam subjected to moving force  W.Y. He, S. Zhu & W.X. Ren   Reconstruction of distributed wind load on structures from response samples  S.Q. Wu & J. Zhu   Establish equivalent model for structure damage detection based on the main navigation channel of Donghai bridge  H.W. Huang, H.J. Li & X. Chu   Steady suction-based aerodynamic control for suppressing vortex induced vibration of a bridge deck section  D.B. Xin, H.F. Zhang & J.P. Ou   Numerical simulation of wind field on the site of a long-span bridge located in mountainous area based on WRF  Y. Han, L. Shen & C.S. Cai   Research on the cable clamp control method of wake galloping on the straddle sling of suspension bridges  P. Guo, S.L. Li & D.W. Wang   Mitigation of wind-induced vibration of a multi-tower building using tuned mass damper  X. Chen, A.Q. Li, Z.Q. Zhang & P. Sun   Wind-induced vibration control and energy harvesting of buildings via a regenerative electromagnetic tuned mass damper  H.X. Sun, Y.F. Luo & X.Y. Wang   Research of the temperature effects on strain response in the steel-truss arch railway bridge using FIR filtering  H.W. Zhao, Y.L. Ding & A.Q. Li   Research on regional sensitivity of dynamic response for long span suspension bridge based on SHM data  C.Q. Miao, H.F. You & H.B. Zhu   Operational modal analysis and full-scale test of a 13-storey new precast superimposed slab shear wall building  Y.C. Ni, X.L. Lu & W.S. Lu   A multi-objective firefly algorithm for wireless sensor placement in structural health monitoring  G.D. Zhou & M.X. Xie   Turbulent wind characteristics of tropical cyclones based on a revised uniform analysis framework  L.X. Li, T. Wu, Y.Q. Xiao & L.L. Song   Wind induced vibrations of vertical hangers of a long-span suspension bridge considering the interference of upstream tower column  W.L. Chen, D.L. Gao & H. Li   Influence of subway traffic induced vibration study for surface wave based nonintrusive monitoring  K.S. Dai, K. Liu, X.F. Li, Y.F. Weng, L.G. Huang, X. Zhao & Q.Y. You   Damping ratios identification by sensitivity-based model updating: Experimental investigation  J. Li, H. Hao & G. Fan   Improved CoC matrix for damage detection with general white noise excitation  S.S. Law & Y. Hui   Aqueduct leakage monitoring based on an image difference algorithm: Preliminary experimental validation  Y.H. An, Z.Z. Wang & J.P. Ou   Structural health monitoring: Theories and application   Decentralized damage detection for nonlinear structures  P.H. Ni & Y. Xia   Comparison of statistical and non-statistical artificial neural network methods for damage detection using modal data  K.H. Padil & N. Bakhary   System identification of nonlinear structures by a substructuring method  S. Weng, F. Gao, H.P. Zhu, W. Tian, Y.Y. Yan & F.N. Li   Planning and managing uncertainties in known broadband input vibration test  C.T. Ng & S.K. Au   Bayesian approach for characterizing wind-induced displacement responses of bridge using structural health monitoring data  Y.Q. Ni & Y.W. Wang   Nonlinear joint model updating using static load test results  P.P. Yuan, Z.C. Wang, W.X. Ren & X. Yang   Sensitivity analysis of stress influence line-based damage indices application to long-span bridges: Preliminary study  L.Y. Mo, Z.W. Chen, S.Y. Zhu & Q.F. Cheng   Application of the impedance-based technique for damage diagnosis on tunnel segment structure  H.P. Zhu, D.M. Ai & H. Luo   Vibration and deformation monitoring of a long-span rigid-frame bridge with distributed long-gauge sensors  Y.D. Tian, X. Zhang & J. Zhang   Prediction of crack propagation by vector form intrinsic finite element method  Y.F. Duan, S.M. Wang, R.Z. Wang, C.Y. Wang & E.C. Ting   Experimental study about damage identification for underground structure based on frequency response function  S.N. Wang, H. Luo & H.P. Zhu   Simultaneous identification of moving forces and structural damages by L1/2 regularization method  C.D. Pan & L. Yu   Damage identification of monopile offshore wind structures using data fusion of acceleration and angular velocity  S.-H. Sim, E. Kim & J.-W. Park   Concrete crack assessment using unmanned aerial vehicle  H. Kim & S.-H. Sim   Large scale neural network for damage detection in civil engineering structures  D. Darsono, K. Park & M. Torbol   Bridge deflection estimation using multi-channel acceleration measurement  T. Nagayama & C. Zhang   Vibration monitoring of expressway viaducts and comparative analysis of their dynamic characteristics  M. Kuleli, T. Nagayama & D. Su   Investigating feasibility of drive-by bridge monitoring by laboratory experiments  C.W. Kim, K.C. Chang, S. Inoue, S. Hasegawa & P.J. McGetrick   Dynamic response based damage detection for beam-like structures using deep learning  Y.Z. Lin & H.W. Ma   Threshold selection method for GDP model based on estimated strain extreme values of bridge due to vehicle loads  X. Yang, J. Zhang & W.X. Ren   An experimental study of a nonlinear piezoelectric energy harvester  W. Shen, Z. Huang & H.P. Zhu   Operational modal analysis for structural health monitoring  H.F. Lam, J.H. Yang & J. Hu   Time series-based structural safety diagnosis using statistical process control of root mean square  H. Yu, H.P. Zhu, F. Gao & S. Weng   Australian network of structural health monitoring   Analysis of stress effect on Lamb wave propagation in isotropic plates  C.T. Ng, M. Mohabuth & A. Kotousov   Dynamic performance assessment of a novel pultruded fibre-reinforced polymer footbridge  J.W. Ngan, C. Caprani, E. Ahmadi & Y. Bai   Static performance assessment of a novel pultruded fibre-reinforced polymer footbridge  S.H. Zhang, C. Caprani, S. Satasivam & Y. Bai   Useful tips for automated model updating of medium rise buildings  K.A.T.L. Kodikara, T.H.T. Chan, A. Nguyen & D.P. Thambiratnam   Simulation of various damage scenarios using finite element modelling for structural health monitoring systems  V.V. Nguyen, J. Li, Y. Yu, U. Dackermann & M.M. Alamdari   Development of a portable NDE system with advanced signal processing and machine learning for health condition diagnosis of in-service timber utility poles  Y. Yu, J. Li, U. Dackermann & M. Subhani   Ultrasonic monitoring of infrastructure: Comparison of conventional and laser systems  S. Majhi, A. Mukherjee, V. Karaganov & B. Uy   Utilizing smartphones for geospatial data collection and construction set out surveying  A.M. Lee, S. Majhi & A. Mukherjee   Railway track condition monitoring using dynamic measurements on in-service vehicles  X.Q. Zhu, S.S. Law & B. Samali   Infrastructure resilience to earthquake actions   Seismic response of secondary structures located at different levels of a building  E. Lim & N. Chouw   Experimental investigation of long span transmission tower-line system subjected to non-uniform seismic excitations  L. Tian, X. Gai, Y.H. Niu & R.S. Ma   Cyclic load responses of RC hollow bridge columns  Y.L. Zhou & Q. Han   Composite optimal control for the seismic response of a long-span triple-tower suspension bridge  H. Wang, Y.F. Wu, B. Sha, K.M. Bi & A.Q. Li   Effect of pile type and pile head fixity on the seismic response of a 5 x 5 pile-raft system embedded in a soft clay subjected to far-field ground motions  L. Zhang & H.B. Liu   Response spectrum analysis of a high-pier railway bridge subjected to multiple support excitations  H.Y. Jia, X.L. Du, D.P. Guo, S.X. Zheng & L.P. Li   Theoretical investigation of vertical pounding phenomenon between girder and support under near-fault vertical ground motions  H. Yang, J. Yang & X. Yin   Numerical study of using RFHDS connected PIP system to mitigate earthquake induced subsea pipeline vibrations  K.M. Bi & H. Hao   Demoting splitting crack