ورود به حساب

نام کاربری گذرواژه

گذرواژه را فراموش کردید؟ کلیک کنید

حساب کاربری ندارید؟ ساخت حساب

ساخت حساب کاربری

نام نام کاربری ایمیل شماره موبایل گذرواژه

برای ارتباط با ما می توانید از طریق شماره موبایل زیر از طریق تماس و پیامک با ما در ارتباط باشید


09117307688
09117179751

در صورت عدم پاسخ گویی از طریق پیامک با پشتیبان در ارتباط باشید

دسترسی نامحدود

برای کاربرانی که ثبت نام کرده اند

ضمانت بازگشت وجه

درصورت عدم همخوانی توضیحات با کتاب

پشتیبانی

از ساعت 7 صبح تا 10 شب

دانلود کتاب Materials Selection In Mechanical Design

دانلود کتاب انتخاب مواد در طراحی مکانیکی

Materials Selection In Mechanical Design

مشخصات کتاب

Materials Selection In Mechanical Design

دسته بندی: مواد
ویرایش: 3 
نویسندگان:   
سری:  
ISBN (شابک) : 0750661682 
ناشر:  
سال نشر: 2005 
تعداد صفحات: 602 
زبان: English 
فرمت فایل : PDF (درصورت درخواست کاربر به PDF، EPUB یا AZW3 تبدیل می شود) 
حجم فایل: 21 مگابایت

قیمت کتاب (تومان) : 41,000



ثبت امتیاز به این کتاب

میانگین امتیاز به این کتاب :
       تعداد امتیاز دهندگان : 10


در صورت تبدیل فایل کتاب Materials Selection In Mechanical Design به فرمت های PDF، EPUB، AZW3، MOBI و یا DJVU می توانید به پشتیبان اطلاع دهید تا فایل مورد نظر را تبدیل نمایند.

توجه داشته باشید کتاب انتخاب مواد در طراحی مکانیکی نسخه زبان اصلی می باشد و کتاب ترجمه شده به فارسی نمی باشد. وبسایت اینترنشنال لایبرری ارائه دهنده کتاب های زبان اصلی می باشد و هیچ گونه کتاب ترجمه شده یا نوشته شده به فارسی را ارائه نمی دهد.


توضیحاتی درمورد کتاب به خارجی



فهرست مطالب

Front Matter
	Acknowledgements
	Features of the Third Edition
Preface
	Table of Contents	file://61682_toc.pdf#page=1Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=1	F	file://61682_indx.pdf#page=1	G	file://61682_indx.pdf#page=1	H	file://61682_indx.pdf#page=1	I	file://61682_indx.pdf#page=1	J	file://61682_indx.pdf#page=1	K	file://61682_indx.pdf#page=2	L	file://61682_indx.pdf#page=2	M	file://61682_indx.pdf#page=2	N	file://61682_indx.pdf#page=3	O	file://61682_indx.pdf#page=3	P	file://61682_indx.pdf#page=3	R	file://61682_indx.pdf#page=4	S	file://61682_indx.pdf#page=4	T	file://61682_indx.pdf#page=4	U	file://61682_indx.pdf#page=4	V	file://61682_indx.pdf#page=4	W	file://61682_indx.pdf#page=4Front Matter	file://61682_fm.pdf#page=1Preface	file://61682_fm.pdf#page=3Table of Contents
	1. Introduction	file://61682_01.pdf#page=1	1.1 Introduction and Synopsis	file://61682_01.pdf#page=2	1.2 Materials in Design	file://61682_01.pdf#page=2	1.3 The Evolution of Engineering Materials	file://61682_01.pdf#page=4	1.4 Case Study: The Evolution of Materials in Vacuum Cleaners	file://61682_01.pdf#page=6	1.5 Summary and Conclusions	file://61682_01.pdf#page=82. The Design Process	file://61682_02.pdf#page=1	2.1 Introduction and Synopsis	file://61682_02.pdf#page=2	2.2 The Design Process	file://61682_02.pdf#page=2	2.3 Types of Design	file://61682_02.pdf#page=6	2.4 Design Tools and Materials Data	file://61682_02.pdf#page=7	2.5 Function, Material, Shape, and Process	file://61682_02.pdf#page=9	2.6 Case Study: Devices to Open Corked Bottles	file://61682_02.pdf#page=10	2.7 Summary and Conclusions	file://61682_02.pdf#page=143. Engineering Materials and their Properties	file://61682_03.pdf#page=1	3.1 Introduction and Synopsis	file://61682_03.pdf#page=2	3.2 The Families of Engineering Materials	file://61682_03.pdf#page=2	3.3 The Definitions of Material Properties	file://61682_03.pdf#page=4	3.4 Summary and Conclusions	file://61682_03.pdf#page=174. Material Property Charts	file://61682_04a.pdf#page=1	4.1 Introduction and Synopsis	file://61682_04a.pdf#page=2	4.2 Exploring Material Properties	file://61682_04a.pdf#page=2	4.3 The Material Property Charts	file://61682_04a.pdf#page=6	4.4 Summary and Conclusions	file://61682_04b.pdf#page=165. Materials Selection - The Basics	file://61682_05.pdf#page=1	5.1 Introduction and Synopsis	file://61682_05.pdf#page=2	5.2 The Selection Strategy	file://61682_05.pdf#page=3	5.3 Attribute Limits and Material Indices	file://61682_05.pdf#page=7	5.4 The Selection Procedure	file://61682_05.pdf#page=15	5.5 Computer-Aided Selection	file://61682_05.pdf#page=21	5.6 The Structural Index	file://61682_05.pdf#page=24	5.7 Summary and Conclusions	file://61682_05.pdf#page=256. Materials Selection - Case Studies	file://61682_06a.pdf#page=1	6.1 Introduction and Synopsis	file://61682_06a.pdf#page=2	6.2 Materials for Oars	file://61682_06a.pdf#page=2	6.3 Mirrors for Large Telescopes	file://61682_06a.pdf#page=6	6.4 Materials for Table Legs	file://61682_06a.pdf#page=10	6.5 Cost: Structural Materials for Buildings	file://61682_06a.pdf#page=13	6.6 Materials for Flywheels	file://61682_06a.pdf#page=17	6.7 Materials for Springs	file://61682_06b.pdf#page=1	6.8 Elastic Hinges and Couplings	file://61682_06b.pdf#page=5	6.9 Materials for Seals	file://61682_06b.pdf#page=8	6.10 Deflection-Limited Design with Brittle Polymers	file://61682_06b.pdf#page=11	6.11 Safe Pressure Vessels	file://61682_06b.pdf#page=15	6.12 Stiff, High Damping Materials for Shaker Tables	file://61682_06b.pdf#page=19	6.13 Insulation for Short-Term Isothermal Containers	file://61682_06b.pdf#page=22	6.14 Energy-Efficient Kiln Walls	file://61682_06c.pdf#page=1	6.15 Materials for Passive Solar Heating	file://61682_06c.pdf#page=4	6.16 Materials to Minimize Thermal Distortion in Precision Devices	file://61682_06c.pdf#page=7	6.17 Nylon Bearings for Ships' Rudders	file://61682_06c.pdf#page=10	6.18 Materials for Heat Exchangers	file://61682_06c.pdf#page=13	6.19 Materials for Radomes	file://61682_06c.pdf#page=18	6.20 Summary and Conclusions	file://61682_06c.pdf#page=227. Processes and Process Selection	file://61682_07.pdf#page=1	7.1 Introduction and Synopsis	file://61682_07.pdf#page=2	7.2 Classifying Processes	file://61682_07.pdf#page=3	7.3 The Processes: Shaping, Joining, and Finishing	file://61682_07.pdf#page=6	7.4 Systematic Process Selection	file://61682_07.pdf#page=21	7.5 Ranking: Process Cost	file://61682_07.pdf#page=28	7.6 Computer-Aided Process Selection	file://61682_07.pdf#page=35	7.7 Supporting Information	file://61682_07.pdf#page=41	7.8 Summary and Conclusions	file://61682_07.pdf#page=418. Process Selection Case Studies	file://61682_08.pdf#page=1	8.1 Introduction and Synopsis	file://61682_08.pdf#page=2	8.2 Forming a Fan	file://61682_08.pdf#page=2	8.3 Fabricating a Pressure Vessel	file://61682_08.pdf#page=5	8.4 An Optical Table	file://61682_08.pdf#page=9	8.5 Economical Casting	file://61682_08.pdf#page=12	8.6 Computer-Based Selection: A Manifold Jacket	file://61682_08.pdf#page=14	8.7 Computer-Based Selection: A Spark Plug Insulator	file://61682_08.pdf#page=17	8.8 Summary and Conclusions	file://61682_08.pdf#page=199. Multiple Constraints and Objectives	file://61682_09.pdf#page=1	9.1 Introduction and Synopsis	file://61682_09.pdf#page=2	9.2 Selection with Multiple Constraints	file://61682_09.pdf#page=3	9.3 Conflicting Objectives, Penalty-Functions, and Exchange Constants	file://61682_09.pdf#page=7	9.4 Summary and Conclusions	file://61682_09.pdf#page=16	Appendix: Traditional Methods of Dealing with Multiple Constraints and Objectives	file://61682_09.pdf#page=1810. Case Studies - Multiple Constraints and Conflicting Objectives	file://61682_10.pdf#page=1	10.1 Introduction and Synopsis	file://61682_10.pdf#page=2	10.2 Multiple Constraints: Con-Rods for High-Performance Engines	file://61682_10.pdf#page=2	10.3 Multiple Constraints: Windings for High-Field Magnets	file://61682_10.pdf#page=6	10.4 Conflicting Objectives: Casings for a Mini-Disk Player	file://61682_10.pdf#page=12	10.5 Conflicting Objectives: Materials for a Disk-Brake Caliper	file://61682_10.pdf#page=16	10.6 Summary and Conclusions	file://61682_10.pdf#page=2111. Selection of Material and Shape	file://61682_11.pdf#page=1	11.1 Introduction and Synopsis	file://61682_11.pdf#page=2	11.2 Shape Factors	file://61682_11.pdf#page=3	11.3 Microscopic or Micro-Structural Shape Factors	file://61682_11.pdf#page=14	11.4 Limits to Shape Efficiency	file://61682_11.pdf#page=19	11.5 Exploring and Comparing Structural Sections	file://61682_11.pdf#page=23	11.6 Material Indices that Include Shape	file://61682_11.pdf#page=25	11.7 Co-Selecting Material and Shape	file://61682_11.pdf#page=30	11.8 Summary and Conclusions	file://61682_11.pdf#page=3212. Selection of Material and Shape: Case Studies	file://61682_12.pdf#page=1	12.1 Introduction and Synopsis	file://61682_12.pdf#page=2	12.2 Spars for Man-Powered Planes	file://61682_12.pdf#page=3	12.3 Ultra-Efficient Springs	file://61682_12.pdf#page=6	12.4 Forks for a Racing Bicycle	file://61682_12.pdf#page=10	12.5 Floor Joists: Wood, Bamboo or Steel?	file://61682_12.pdf#page=12	12.6 Increasing the Stiffness of Steel Sheet	file://61682_12.pdf#page=15	12.7 Table Legs Again: Thin or Light?	file://61682_12.pdf#page=17	12.8 Shapes that Flex: Leaf and Strand Structures	file://61682_12.pdf#page=19	12.9 Summary and Conclusions	file://61682_12.pdf#page=2113. Designing Hybrid Materials	file://61682_13a.pdf#page=1	13.1 Introduction and Synopsis	file://61682_13a.pdf#page=2	13.2 Filling Holes in Material-Property Space	file://61682_13a.pdf#page=4	13.3 The Method: "A + B + Configuration + Scale"	file://61682_13a.pdf#page=8	13.4 Composites: Hybrids of Type 1	file://61682_13a.pdf#page=10	13.5 Sandwich Structures: Hybrids of Type 2	file://61682_13b.pdf#page=1	13.6 Lattices: Hybrids of Type 3	file://61682_13b.pdf#page=6	13.7 Segmented Structures: Hybrids of Type 4	file://61682_13b.pdf#page=14	13.8 Summary and Conclusions	file://61682_13b.pdf#page=1914. Hybrid Case Studies	file://61682_14.pdf#page=1	14.1 Introduction and Synopsis	file://61682_14.pdf#page=2	14.2 Designing Metal Matrix Composites	file://61682_14.pdf#page=2	14.3 Refrigerator Walls	file://61682_14.pdf#page=4	14.4 Connectors that do not Relax their Grip	file://61682_14.pdf#page=6	14.5 Extreme Combinations of Thermal and Electrical Conduction	file://61682_14.pdf#page=8	14.6 Materials for Microwave-Transparent Enclosures	file://61682_14.pdf#page=11	14.7 Exploiting Anisotropy: Heat Spreading Surfaces	file://61682_14.pdf#page=13	14.8 The Mechanical Efficiency of Natural Materials	file://61682_14.pdf#page=1515. Information and Knowledge Sources for Design	file://61682_15.pdf#page=1	15.1 Introduction and Synopsis	file://61682_15.pdf#page=2	15.2 Information for Materials and Processes	file://61682_15.pdf#page=3	15.3 Screening Information: Structure and Sources	file://61682_15.pdf#page=7	15.4 Supporting Information: Structure and Sources	file://61682_15.pdf#page=9	15.5 Ways of Checking and Estimating Data	file://61682_15.pdf#page=11	15.6 Summary and Conclusions	file://61682_15.pdf#page=1516. Materials and the Environment	file://61682_16.pdf#page=1	16.1 Introduction and Synopsis	file://61682_16.pdf#page=2	16.2 The Material Life Cycle	file://61682_16.pdf#page=2	16.3 Material and Energy-Consuming Systems	file://61682_16.pdf#page=3	16.4 The Eco-Attributes of Materials	file://61682_16.pdf#page=6	16.5 Eco-Selection	file://61682_16.pdf#page=11	16.6 Case Studies: Drink Containers and Crash Barriers	file://61682_16.pdf#page=17	16.7 Summary and Conclusions	file://61682_16.pdf#page=1917. Materials and Industrial Design	file://61682_17.pdf#page=1	17.1 Introduction and Synopsis	file://61682_17.pdf#page=2	17.2 The Requirements Pyramid	file://61682_17.pdf#page=2	17.3 Product Character	file://61682_17.pdf#page=4	17.4 Using Materials and Processes to Create Product Personality	file://61682_17.pdf#page=7	17.5 Summary and Conclusions	file://61682_17.pdf#page=1618. Forces for Change	file://61682_18.pdf#page=1	18.1 Introduction and Synopsis	file://61682_18.pdf#page=2	18.2 Market-Pull and Science-Push	file://61682_18.pdf#page=2	18.3 Growing Population and Wealth, and Market Saturation	file://61682_18.pdf#page=8	18.4 Product Liability and Service Provision	file://61682_18.pdf#page=9	18.5 Miniaturization and Multi-Functionality	file://61682_18.pdf#page=10	18.6 Concern for the Environment and for the Individual	file://61682_18.pdf#page=11	18.7 Summary and Conclusions	file://61682_18.pdf#page=13Appendix A: Useful Solutions to Standard Problems	file://61682_app.pdf#page=1	Introduction and Synopsis	file://61682_app.pdf#page=2	A.1 Constitutive Equations for Mechanical Response	file://61682_app.pdf#page=3	A.2 Moments of Sections	file://61682_app.pdf#page=5	A.3 Elastic Bending of Beams	file://61682_app.pdf#page=7	A.4 Failure of Beams and Panels	file://61682_app.pdf#page=9	A.5 Buckling of Columns, Plates, and Shells	file://61682_app.pdf#page=11	A.6 Torsion of Shafts	file://61682_app.pdf#page=13	A.7 Static and Spinning Disks	file://61682_app.pdf#page=15	A.8 Contact Stresses	file://61682_app.pdf#page=17	A.9 Estimates for Stress Concentrations	file://61682_app.pdf#page=19	A.10 Sharp Cracks	file://61682_app.pdf#page=21	A.11 Pressure Vessels	file://61682_app.pdf#page=23	A.12 Vibrating Beams, Tubes, and Disks	file://61682_app.pdf#page=25	A.13 Creep and Creep Fracture	file://61682_app.pdf#page=27	A.14 Flow of Heat and Matter	file://61682_app.pdf#page=29	A.15 Solutions for Diffusion Equations	file://61682_app.pdf#page=31Appendix B: Material Indices	file://61682_app.pdf#page=35	B.1 Introduction and Synopsis	file://61682_app.pdf#page=36	B.2 Uses of Material Indices	file://61682_app.pdf#page=36Appendix C: Data and Information for Engineering Materials	file://61682_app.pdf#page=41	C.1 Names and Applications: Metals and Alloys	file://61682_app.pdf#page=42	C.2 Names and Applications: Polymers and Foams	file://61682_app.pdf#page=43	C.3 Names and Applications: Composites, Ceramics, Glasses, and Natural Materials	file://61682_app.pdf#page=44	C.4 Melting Temperature, T_m, and Glass Temperature, T_g^l	file://61682_app.pdf#page=46	C.5 Density, Rho	file://61682_app.pdf#page=48	C.6 Young's Modulus, E	file://61682_app.pdf#page=50	C.7 Yield Strength, Sigma_y, and Tensile Strength, Sigma_ts	file://61682_app.pdf#page=52	C.8 Fracture Toughness (Plane-Strain), K_1C	file://61682_app.pdf#page=54	C.9 Thermal Conductivity, Lambda	file://61682_app.pdf#page=56	C.10 Thermal Expansion, Alpha	file://61682_app.pdf#page=58	C.11 Approximate Production Energies and CO_2 Burden	file://61682_app.pdf#page=60	C.12 Environmental Resistance	file://61682_app.pdf#page=62Appendix D: Information and Knowledge Sources for Materials and Processes	file://61682_app.pdf#page=64	D.1 Introduction	file://61682_app.pdf#page=65	D.2 Information Sources for Materials	file://61682_app.pdf#page=65	D.3 Information for Manufacturing Processes	file://61682_app.pdf#page=79	D.4 Databases and Expert Systems in Software	file://61682_app.pdf#page=80	D.5 Additional Useful Internet Sites	file://61682_app.pdf#page=81	D.6 Supplier Registers, Government Organizations, Standards and Professional Societies	file://61682_app.pdf#page=82Appendix E: Exercises	file://61682_app.pdf#page=84	E.1 Introduction to the Exercises	file://61682_app.pdf#page=85	E.2 Devising Concepts	file://61682_app.pdf#page=86	E.3 Use of Material Selection Charts	file://61682_app.pdf#page=86	E.4 Translation: Constraints and Objectives	file://61682_app.pdf#page=89	E.5 Deriving and Using Material Indices	file://61682_app.pdf#page=92	E.6 Selecting Processes	file://61682_app.pdf#page=101	E.7 Multiple Constraints and Objectives	file://61682_app.pdf#page=106	E.8 Selecting Material and Shape	file://61682_app.pdf#page=114	E.9 Hybrid Materials	file://61682_app.pdf#page=121Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=11. Introduction
	1.1 Introduction and Synopsis
	1.2 Materials in Design
	1.3 The Evolution of Engineering Materials
	1.4 Case Study: The Evolution of Materials in Vacuum Cleaners
	1.5 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=12. The Design Process
	2.1 Introduction and Synopsis
	2.2 The Design Process
	2.3 Types of Design
	2.4 Design Tools and Materials Data
	2.5 Function, Material, Shape, and Process
	2.6 Case Study: Devices to Open Corked Bottles
	2.7 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=13. Engineering Materials and their Properties
	3.1 Introduction and Synopsis
	3.2 The Families of Engineering Materials
	3.3 The Definitions of Material Properties
	3.4 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=14. Material Property Charts
	4.1 Introduction and Synopsis
	4.2 Exploring Material Properties
	4.3 The Material Property Charts
	4.4 Summary and Conclusions	file://61682_04b.pdf#page=16Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=14. Material Property Charts	file://61682_04a.pdf#page=1	4.1 Introduction and Synopsis	file://61682_04a.pdf#page=2	4.2 Exploring Material Properties	file://61682_04a.pdf#page=2	4.3 The Material Property Charts	file://61682_04a.pdf#page=6	4.4 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=15. Materials Selection - The Basics
	5.1 Introduction and Synopsis
	5.2 The Selection Strategy
	5.3 Attribute Limits and Material Indices
	5.4 The Selection Procedure
	5.5 Computer-Aided Selection
	5.6 The Structural Index
	5.7 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=16. Materials Selection - Case Studies
	6.1 Introduction and Synopsis
	6.2 Materials for Oars
	6.3 Mirrors for Large Telescopes
	6.4 Materials for Table Legs
	6.5 Cost: Structural Materials for Buildings
	6.6 Materials for Flywheels
	6.7 Materials for Springs	file://61682_06b.pdf#page=1	6.8 Elastic Hinges and Couplings	file://61682_06b.pdf#page=5	6.9 Materials for Seals	file://61682_06b.pdf#page=8	6.10 Deflection-Limited Design with Brittle Polymers	file://61682_06b.pdf#page=11	6.11 Safe Pressure Vessels	file://61682_06b.pdf#page=15	6.12 Stiff, High Damping Materials for Shaker Tables	file://61682_06b.pdf#page=19	6.13 Insulation for Short-Term Isothermal Containers	file://61682_06b.pdf#page=22	6.14 Energy-Efficient Kiln Walls	file://61682_06c.pdf#page=1	6.15 Materials for Passive Solar Heating	file://61682_06c.pdf#page=4	6.16 Materials to Minimize Thermal Distortion in Precision Devices	file://61682_06c.pdf#page=7	6.17 Nylon Bearings for Ships' Rudders	file://61682_06c.pdf#page=10	6.18 Materials for Heat Exchangers	file://61682_06c.pdf#page=13	6.19 Materials for Radomes	file://61682_06c.pdf#page=18	6.20 Summary and Conclusions	file://61682_06c.pdf#page=22Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=16. Materials Selection - Case Studies	file://61682_06a.pdf#page=1	6.1 Introduction and Synopsis	file://61682_06a.pdf#page=2	6.2 Materials for Oars	file://61682_06a.pdf#page=2	6.3 Mirrors for Large Telescopes	file://61682_06a.pdf#page=6	6.4 Materials for Table Legs	file://61682_06a.pdf#page=10	6.5 Cost: Structural Materials for Buildings	file://61682_06a.pdf#page=13	6.6 Materials for Flywheels	file://61682_06a.pdf#page=17	6.7 Materials for Springs
	6.8 Elastic Hinges and Couplings
	6.9 Materials for Seals
	6.10 Deflection-Limited Design with Brittle Polymers
	6.11 Safe Pressure Vessels
	6.12 Stiff, High Damping Materials for Shaker Tables
	6.13 Insulation for Short-Term Isothermal Containers
	6.14 Energy-Efficient Kiln Walls	file://61682_06c.pdf#page=1	6.15 Materials for Passive Solar Heating	file://61682_06c.pdf#page=4	6.16 Materials to Minimize Thermal Distortion in Precision Devices	file://61682_06c.pdf#page=7	6.17 Nylon Bearings for Ships' Rudders	file://61682_06c.pdf#page=10	6.18 Materials for Heat Exchangers	file://61682_06c.pdf#page=13	6.19 Materials for Radomes	file://61682_06c.pdf#page=18	6.20 Summary and Conclusions	file://61682_06c.pdf#page=22Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=16. Materials Selection - Case Studies	file://61682_06a.pdf#page=1	6.1 Introduction and Synopsis	file://61682_06a.pdf#page=2	6.2 Materials for Oars	file://61682_06a.pdf#page=2	6.3 Mirrors for Large Telescopes	file://61682_06a.pdf#page=6	6.4 Materials for Table Legs	file://61682_06a.pdf#page=10	6.5 Cost: Structural Materials for Buildings	file://61682_06a.pdf#page=13	6.6 Materials for Flywheels	file://61682_06a.pdf#page=17	6.7 Materials for Springs	file://61682_06b.pdf#page=1	6.8 Elastic Hinges and Couplings	file://61682_06b.pdf#page=5	6.9 Materials for Seals	file://61682_06b.pdf#page=8	6.10 Deflection-Limited Design with Brittle Polymers	file://61682_06b.pdf#page=11	6.11 Safe Pressure Vessels	file://61682_06b.pdf#page=15	6.12 Stiff, High Damping Materials for Shaker Tables	file://61682_06b.pdf#page=19	6.13 Insulation for Short-Term Isothermal Containers	file://61682_06b.pdf#page=22	6.14 Energy-Efficient Kiln Walls
	6.15 Materials for Passive Solar Heating
	6.16 Materials to Minimize Thermal Distortion in Precision Devices
	6.17 Nylon Bearings for Ships' Rudders
	6.18 Materials for Heat Exchangers
	6.19 Materials for Radomes
	6.20 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=17. Processes and Process Selection
	7.1 Introduction and Synopsis
	7.2 Classifying Processes
	7.3 The Processes: Shaping, Joining, and Finishing
	7.4 Systematic Process Selection
	7.5 Ranking: Process Cost
	7.6 Computer-Aided Process Selection
	7.7 Supporting Information
	7.8 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=18. Process Selection Case Studies
	8.1 Introduction and Synopsis
	8.2 Forming a Fan
	8.3 Fabricating a Pressure Vessel
	8.4 An Optical Table
	8.5 Economical Casting
	8.6 Computer-Based Selection: A Manifold Jacket
	8.7 Computer-Based Selection: A Spark Plug Insulator
	8.8 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=19. Multiple Constraints and Objectives
	9.1 Introduction and Synopsis
	9.2 Selection with Multiple Constraints
	9.3 Conflicting Objectives, Penalty-Functions, and Exchange Constants
	9.4 Summary and Conclusions
	Appendix: Traditional Methods of Dealing with Multiple Constraints and Objectives
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=110. Case Studies - Multiple Constraints and Conflicting Objectives
	10.1 Introduction and Synopsis
	10.2 Multiple Constraints: Con-Rods for High-Performance Engines
	10.3 Multiple Constraints: Windings for High-Field Magnets
	10.4 Conflicting Objectives: Casings for a Mini-Disk Player
	10.5 Conflicting Objectives: Materials for a Disk-Brake Caliper
	10.6 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=111. Selection of Material and Shape
	11.1 Introduction and Synopsis
	11.2 Shape Factors
	11.3 Microscopic or Micro-Structural Shape Factors
	11.4 Limits to Shape Efficiency
	11.5 Exploring and Comparing Structural Sections
	11.6 Material Indices that Include Shape
	11.7 Co-Selecting Material and Shape
	11.8 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=112. Selection of Material and Shape: Case Studies
	12.1 Introduction and Synopsis
	12.2 Spars for Man-Powered Planes
	12.3 Ultra-Efficient Springs
	12.4 Forks for a Racing Bicycle
	12.5 Floor Joists: Wood, Bamboo or Steel?
	12.6 Increasing the Stiffness of Steel Sheet
	12.7 Table Legs Again: Thin or Light?
	12.8 Shapes that Flex: Leaf and Strand Structures
	12.9 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=113. Designing Hybrid Materials
	13.1 Introduction and Synopsis
	13.2 Filling Holes in Material-Property Space
	13.3 The Method: "A + B + Configuration + Scale"
	13.4 Composites: Hybrids of Type 1
	13.5 Sandwich Structures: Hybrids of Type 2	file://61682_13b.pdf#page=1	13.6 Lattices: Hybrids of Type 3	file://61682_13b.pdf#page=6	13.7 Segmented Structures: Hybrids of Type 4	file://61682_13b.pdf#page=14	13.8 Summary and Conclusions	file://61682_13b.pdf#page=19Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=113. Designing Hybrid Materials	file://61682_13a.pdf#page=1	13.1 Introduction and Synopsis	file://61682_13a.pdf#page=2	13.2 Filling Holes in Material-Property Space	file://61682_13a.pdf#page=4	13.3 The Method: "A + B + Configuration + Scale"	file://61682_13a.pdf#page=8	13.4 Composites: Hybrids of Type 1	file://61682_13a.pdf#page=10	13.5 Sandwich Structures: Hybrids of Type 2
	13.6 Lattices: Hybrids of Type 3
	13.7 Segmented Structures: Hybrids of Type 4
	13.8 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=114. Hybrid Case Studies
	14.1 Introduction and Synopsis
	14.2 Designing Metal Matrix Composites
	14.3 Refrigerator Walls
	14.4 Connectors that do not Relax their Grip
	14.5 Extreme Combinations of Thermal and Electrical Conduction
	14.6 Materials for Microwave-Transparent Enclosures
	14.7 Exploiting Anisotropy: Heat Spreading Surfaces
	14.8 The Mechanical Efficiency of Natural Materials
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=115. Information and Knowledge Sources for Design
	15.1 Introduction and Synopsis
	15.2 Information for Materials and Processes
	15.3 Screening Information: Structure and Sources
	15.4 Supporting Information: Structure and Sources
	15.5 Ways of Checking and Estimating Data
	15.6 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=116. Materials and the Environment
	16.1 Introduction and Synopsis
	16.2 The Material Life Cycle
	16.3 Material and Energy-Consuming Systems
	16.4 The Eco-Attributes of Materials
	16.5 Eco-Selection
	16.6 Case Studies: Drink Containers and Crash Barriers
	16.7 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=117. Materials and Industrial Design
	17.1 Introduction and Synopsis
	17.2 The Requirements Pyramid
	17.3 Product Character
	17.4 Using Materials and Processes to Create Product Personality
	17.5 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=118. Forces for Change
	18.1 Introduction and Synopsis
	18.2 Market-Pull and Science-Push
	18.3 Growing Population and Wealth, and Market Saturation
	18.4 Product Liability and Service Provision
	18.5 Miniaturization and Multi-Functionality
	18.6 Concern for the Environment and for the Individual
	18.7 Summary and Conclusions
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=2	F	file://61682_indx.pdf#page=2	G	file://61682_indx.pdf#page=2	H	file://61682_indx.pdf#page=2	I	file://61682_indx.pdf#page=2	J	file://61682_indx.pdf#page=2	K	file://61682_indx.pdf#page=3	L	file://61682_indx.pdf#page=3	M	file://61682_indx.pdf#page=3	N	file://61682_indx.pdf#page=4	O	file://61682_indx.pdf#page=4	P	file://61682_indx.pdf#page=4	R	file://61682_indx.pdf#page=5	S	file://61682_indx.pdf#page=5	T	file://61682_indx.pdf#page=5	U	file://61682_indx.pdf#page=5	V	file://61682_indx.pdf#page=5	W	file://61682_indx.pdf#page=5Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=1Appendix A: Useful Solutions to Standard Problems
	Introduction and Synopsis
	A.1 Constitutive Equations for Mechanical Response
	A.2 Moments of Sections
	A.3 Elastic Bending of Beams
	A.4 Failure of Beams and Panels
	A.5 Buckling of Columns, Plates, and Shells
	A.6 Torsion of Shafts
	A.7 Static and Spinning Disks
	A.8 Contact Stresses
	A.9 Estimates for Stress Concentrations
	A.10 Sharp Cracks
	A.11 Pressure Vessels
	A.12 Vibrating Beams, Tubes, and Disks
	A.13 Creep and Creep Fracture
	A.14 Flow of Heat and Matter
	A.15 Solutions for Diffusion Equations
Appendix B: Material Indices
	B.1 Introduction and Synopsis
	B.2 Uses of Material Indices
Appendix C: Data and Information for Engineering Materials
	C.1 Names and Applications: Metals and Alloys
	C.2 Names and Applications: Polymers and Foams
	C.3 Names and Applications: Composites, Ceramics, Glasses, and Natural Materials
	C.4 Melting Temperature, T_m, and Glass Temperature, T_g^l
	C.5 Density, Rho
	C.6 Young's Modulus, E
	C.7 Yield Strength, Sigma_y, and Tensile Strength, Sigma_ts
	C.8 Fracture Toughness (Plane-Strain), K_1C
	C.9 Thermal Conductivity, Lambda
	C.10 Thermal Expansion, Alpha
	C.11 Approximate Production Energies and CO_2 Burden
	C.12 Environmental Resistance
Appendix D: Information and Knowledge Sources for Materials and Processes
	D.1 Introduction
	D.2 Information Sources for Materials
	D.3 Information for Manufacturing Processes
	D.4 Databases and Expert Systems in Software
	D.5 Additional Useful Internet Sites
	D.6 Supplier Registers, Government Organizations, Standards and Professional Societies
Appendix E: Exercises
	E.1 Introduction to the Exercises
	E.2 Devising Concepts
	E.3 Use of Material Selection Charts
	E.4 Translation: Constraints and Objectives
	E.5 Deriving and Using Material Indices
	E.6 Selecting Processes
	E.7 Multiple Constraints and Objectives
	E.8 Selecting Material and Shape
	E.9 Hybrid Materials
	Index	file://61682_indx.pdf#page=1	A	file://61682_indx.pdf#page=1	B	file://61682_indx.pdf#page=1	C	file://61682_indx.pdf#page=1	D	file://61682_indx.pdf#page=1	E	file://61682_indx.pdf#page=1	F	file://61682_indx.pdf#page=1	G	file://61682_indx.pdf#page=1	H	file://61682_indx.pdf#page=1	I	file://61682_indx.pdf#page=1	J	file://61682_indx.pdf#page=1	K	file://61682_indx.pdf#page=2	L	file://61682_indx.pdf#page=2	M	file://61682_indx.pdf#page=2	N	file://61682_indx.pdf#page=3	O	file://61682_indx.pdf#page=3	P	file://61682_indx.pdf#page=3	R	file://61682_indx.pdf#page=4	S	file://61682_indx.pdf#page=4	T	file://61682_indx.pdf#page=4	U	file://61682_indx.pdf#page=4	V	file://61682_indx.pdf#page=4	W	file://61682_indx.pdf#page=4Front Matter	file://61682_fm.pdf#page=1Table of Contents	file://61682_toc.pdf#page=1Index
	A
	B
	C
	D
	E
	F
	G
	H
	I
	J
	K
	L
	M
	N
	O
	P
	R
	S
	T
	U
	V
	W




نظرات کاربران

تمامی حقوق معنوی و مادی وبسایت متعلق به اینترنشنال لایبرری می باشد
نماد اعتماد الکترونیکی