Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering: Proceedings of I-DAD 2020

Front Matter ....Pages i-xiii
 3D Digitizing Practice-Advantage in Reverse Engineering with Accuracy Boost  (C. J. Thomas Renald, S. Yuvaraj, J. David Rathnaraj)....Pages 1-9
 Cell Arrangement Measurement—A Perfect Usage of Cell Fabricating Framework in an Industry  (C. J. Thomas Renald, S. Yuvaraj, J. David Rathnaraj)....Pages 11-19
 Exploratory and Numerical Examination of Blending of Four Planar Parallel Planes  (C. J. Thomas Renald, K. Karthikeyan, S. Yuvaraj, J. David Rathnaraj)....Pages 21-30
 Clutch Operating Mechanism for Disabled People with Leg Amputee  (Ravi Kumar Gupta, Deepak Goyal, Akhilesh Kumar Sharma)....Pages 31-39
 Optimization and Analysis of Front Telescopic Suspension for Electric Bike to Have Comfortable Ride: India Perspective  (Yogendra L. Jain, V. U. Garud, S. Dubal, S. Arole)....Pages 41-51
 Design and Analysis of Aluminium Matrix Composite Aircraft Wing Structure  (M. Saleem, Nishant Kumar Raj, Shreshth Gupta, Yogesh Kumar)....Pages 53-60
 CFD Analysis on Extrusion of Slurry in Direct Ink Writing  (E. Balasubramanian, Yogesh Kumar, Nishant Kumar Raj, S. Smruthi, P. Vikram)....Pages 61-72
 Experimental and Numerical Study on Temperature Distribution of Infrared Heater Used for Curing Solid Propellant Slurries  (K. Tesfaye, M. Silambarasan, L. M. Manova, E. Balasubramanian, A. S. Praveen)....Pages 73-79
 Experimental Investigation on Geometric Error in Single-Point Incremental Forming with Dummy Sheet  (Vikas Sisodia, Shailendra Kumar, Rahul Jagtap, Kiran More)....Pages 81-92
 Numerical Investigation on Optimized Convergent Divergent Nozzle in 3S Separator Device  (L. Prabhu, N. Kiran Jadediya, P. Gangadhar Venkata Ramana, J. Srinivas)....Pages 93-100
 Thermal Distribution on Gas Turbine Blade Using Thermal Paint  (P. L. Rupesh, Arulprakasajothi)....Pages 101-113
 Development and Experimental Assessment of a Fluid Flow Monitoring System Using Flow Sensor and Arduino Interface  (Sharad S. Mulik, Abhishek D. Patange, R. Jegadeeshwaran, Sujit S. Pardeshi, Aditi Rahegaonkar)....Pages 115-122
 A Study on the Performance and CO2 Mitigation Potential of an Advanced Micro-gasifier Cookstoves for Sustainable Development  (D. Sakthivadivel, P. Ganesh Kumar, G. Praveen Kumar, P. Raman, Ranko Goic, S. Iniyan)....Pages 123-129
 Experimental and Numerical Investigation of Non-reacting Flow in Can Combustor for Microgas Turbine Engine  (V. Kirubakaran, David S. Bhatt)....Pages 131-137
 Effect of Number of Inlet Tangential Ports and Their Angle on Spray Characteristics of Plug Type Swirl Injector  (Sri Nithya Mahottamananda, D. N. Dilli Babu, P. N. Kadiresh)....Pages 139-149
 Hybrid Incremental Forming: Investigation on Localized Thinning and Thickness Distribution in Formed Parts  (Rahul Jagtap, Vikas Sisodia, Kiran More, Shailendra Kumar)....Pages 151-161
 Influence of Seam Threading of a Cricket Ball on Its Trajectory  (K. S. Vepa, N. V. S. S. Sagar)....Pages 163-170
 Numerical Modeling and Analysis of a Multi-rotor UAS  (K. S. Vepa, N. V. S. S. Sagar, Balasubramanian Esakki, Chandrasekhar Udayagiri)....Pages 171-179
 Multistage Mass Optimization of a Quadcopter Frame  (N. V. S. S. Sagar, Balasubramanian Esakki, Chandrasekhar Udayagiri, K. S. Vepa)....Pages 181-188
 Comparative Study of Response of Vibrations for Circular and Square Defects on Components of Cylindrical Roller Bearing Under Different Conditions  (Sushant M. Patil, R. G. Desavale, Prasad V. Shinde, Vijay R. Patil)....Pages 189-198
 Development of DLP-Based Stereolithography System  (Baban Suryatal, Suhas Deshmukh, Sunil Sarawade)....Pages 199-207
 Experimental Investigation on Geometric Accuracy and Surface Roughness of Formed Part in Multistage Single Point Incremental Forming (SPIF) Process  (Sunandkumar Gajjar, Vikas Sisodia, Rahul Jagtap, Kiran More, Shailendra Kumar)....Pages 209-222
 Wear Behavior of Duplex Stainless Steels Sintered and Forged Under Partial Vacuum Atmosphere  (C. Rajkumar, J. Udaya Prakash, C. Sarala Rubi, R. Mariappan)....Pages 223-229
 Static Analysis of a C-Channel Robot Gripper Arm Using Finite Element Analysis  (D. Sakthimurugan, L. Antony Michael Raj, V. Antony Aroul Raj, R. Balaji, K. Thavasilingam, N. Bharath)....Pages 231-237
 TLBO and JAYA: Insights into Novel Multi-objective Optimization Techniques  (V. Rajashekar, Yeole Shivraj Narayan)....Pages 239-246
 Study of Vehicle Pulling Phenomenon and Various Factors that Influence Vehicle Pull  (Kale Shubham, Patil Pramod, Sharma Ankur, Tawade Prasad, Bhalekar Sahil)....Pages 247-254
 Design and Analyzing Vibration with Acoustic—Structural Coupling of Muffler for Four-Stroke Diesel Engine  (T. Sreedhar, B. Nageswara Rao)....Pages 255-263
 Review of Polydimethylsiloxane (PDMS) as a Material for Additive Manufacturing  (Qusai Alkhalaf, Sarang Pande, Ritesh Ramesh Palkar)....Pages 265-275
 A State-of-the-Art Review on 3D Printed Orthotic Devices for Flat Feet Condition  (S. Koteswari, Yeole Shivraj Narayan)....Pages 277-284
 Synthesis and Characterization of 17 Cr Ferritic ODS Steel Developed Through Vacuum Hot Pressing  (G. Dharmalingam, Sellamuthu Prabhukumar, M. Arun Prasad)....Pages 285-294
 Investigation on Mechanical Properties of AA6082-AA7075 Friction Stir Welded Dissimilar Aluminum Alloys  (K. Giridharan, G. Chakravarthi, S. Karthick, S. MuthuKumaran, S. Padmanaban, M. Kabeerr)....Pages 295-302
 Quieter Cabin Through Reduction in Uncontrolled Vehicle Air Leakage and Controlling Actions at Various Levels  (Kedar Kulkarni, Pramod Patil, Samar Deshpande)....Pages 303-310
 Aerodynamic Analysis of Manta Ray-Inspired Micro-air Vehicle Wing Planforms  (Deepak Subramanian, Jerome Alex Revanth, Gangadhar Arasu Vasagan, Pankaj Soorya Ramnarendran, Rajesh Senthil Kumar Thangeswaran, Balajee Ramakrishnananda)....Pages 311-316
 A Route Planning Strategy for Commercial Deliveries Using Drones  (Soumen Manna, Anand Narasimhamurthy)....Pages 317-324
 Assessment of Local Pressure Coefficient Over Conventional and Unconventional Tall Buildings  (K. B. Rajasekarababu, G. Vinayagamurthy)....Pages 325-333
 IoT-Based Protection of Ventilation and Air Conditioning Units in Chemical Industry  (M. Vigneshwaran, P. Lakshmanan, Muniyandy Elangovan)....Pages 335-341
 Numerical Study on Supersonic Co-flowing Jet with Varying Lip Thickness  (R. Naren Shankar, K. Sathish Kumar, N. Dilip Raja, Kamal Raj Chandra Shekar, Nishant Kumar Raj, Dipranjan Gupta)....Pages 343-350
 Design of Automatic Deluge Fire Protection System for Explosive Processing Building  (G. Vishnu Teja, M. Meikandan)....Pages 351-357
 Numerical Study on Sonic Underexpanded Co-flowing Jet with Varying Separation Distance  (R. Naren Shankar, K. Sathish Kumar, N. Dilip Raja, J. Sumendran, Nishant Kumar Raj, Purushottam Kumar Yadav et al.)....Pages 359-365
 Study of Gas-Centered Coaxial Injector Using Jet in a Cross-Flow Mechanism  (K. R. Arun)....Pages 367-376
 Fatigue Analysis of Helical Spring Subjected to Multi-axial Load  (Tarek Al Musalli, Tesfaye Kebede Ali, Balasubramanian Esakki)....Pages 377-387
 Wear Properties on AA2014/Al2O3/TiB2 Hybrid Metal Matrix Composites  (Jayavelu Sundaram, J. Udaya Prakash, Harivind Kagitha)....Pages 389-395
 NiP Composite Coating of Piston Ring by Plate and Bumper Method  (M. Malathi, J. Herbert Mabel, R. Rajendran)....Pages 397-407
 Microstructural and Mechanical Characterization of Sintered and Hot Pressed Hybrid Metal Matrix Composites  (Jayavelu Sundaram, J. Udaya Prakash, Mariappan Ramajayam)....Pages 409-418
 A Novel Methodology of Enhancing Vehicle Safety Using a Safety Valve for Vehicle Wheels  (T. Sundararajan, R. Muthuraj, P. Hariharan, R. Srinivasan)....Pages 419-426
 An Innovative Method of Preventing Bolt Hole Crack in Aluminium Wheels by Using Laser Peening Technique  (T. Sundararajan, R. Muthuraj, R. Srinivas, A. Hariprasad)....Pages 427-434
 Lab VIEW and PID Action-Based Brake Lever Effect for Validation of Servo Vacuum Booster  (A. Selwin Mich Priyadharson, S. Vinson Joshua)....Pages 435-442
 Design and Development of a Cost-Effective Reloadable Motor for Sounding Rocket  ( Ravikiran, Mohd. Jawad Shariff, H. Kaushil, S. Likhitha, Nikhil Bhootpur, Sreejith Mohan)....Pages 443-450
 Challenges in the Design of Safe Handling System for Explosive Dust  (Nagababu Kurakula, Elangovan Muniyandy)....Pages 451-455
 Risk Assessment on Storage and Handling of Highly Toxic Chemical in Rocket Industry  (P. Srinivas, Muniyandy Elangovan)....Pages 457-464
 Performance Evaluation of Linear Solar Collector Using Hybrid Nanofluid  (Sreejith Mohan, Albin Joseph, Akash Poovathinkal, K. H. Akhilesh, Jerin Reji, Jithin Ninan Idicula et al.)....Pages 465-472
 Review of Experimental Approaches for the Analysis of Aerodynamic Performance of Vertical Axis Wind Turbines  (Vishal Kaushik, R. Naren Shankar)....Pages 473-480
 Analysis and Design of an Optical Biosensor Using Mathematical Modeling  (G. Sowmya Padukone, H. Uma Devi, Shivaputra, Meenakshi L. Rathod)....Pages 481-491
 A Contemporary Review on Knee Injuries and Protective Pads  (K. Anirudh, Shivraj Narayan Yeole)....Pages 493-499
 Augmented Reality Based Collaborative Product Enhancement  (Ravi Kumar Gupta)....Pages 501-509
 Influence of Different Abrasives Mixtures on Abrasive Water Jet Drilling of Die Steel  (K. Balaji, N. Yuvaraj)....Pages 511-519
 Rarefied Flow Field Analysis on a Re-entry Vehicle  (M. Abhay, Vinod Kumar, Aaditya Chaphalkar, Jiju Justus)....Pages 521-528
 Computation of Drag of a Ballistic Reentry Body at Various Mach Numbers  (S. Balasubramanian, G. Vidya, Ganapati Joshi)....Pages 529-536
 Laser Machining of AISI 304: An Experimental Study of Influence of Process Parameters on Dross Height Formation  (Aniket Jadhav, Shailendra Kumar)....Pages 537-545
 Development of Analytical Method for Mass Flow Measurement in a Porous Channel  (Hussain Najmi, Eddy El-Tabach, Nicolas Gascoin, Khaled Chetehouna, François Falempin)....Pages 547-554
 Experimental Investigation on Thermal Degradation of Multilayer Honeycomb Core Laminate Sandwich Composite in a Cone Calorimeter  (Hussain Najmi, Jocelyn Luche, Thomas Rogaume)....Pages 555-567
Back Matter ....Pages 569-571