IEEE Std 802.11(TM)-2016

IEEE 802.11 Front cover
Title page
Important Notices and Disclaimers Concerning IEEE Standards Documents
Participants
Introduction
	Incorporating published amendments
	Technical corrections, clarifications, and enhancements
	Renumbering of clauses and annexes
Contents
Tables
Figures
1. Overview
	1.1 Scope
	1.2 Purpose
	1.3 Supplementary information on purpose
	1.4 Word usage
	1.5 Terminology for mathematical, logical, and bit operations
2. Normative references
3. Definitions, acronyms, and abbreviations
	3.1 Definitions
	3.2 Definitions specific to IEEE Std 802.11
	3.3 Definitions specific to IEEE 802.11 operation in some regulatory domains
	3.4 Abbreviations and acronyms
	3.5 Abbreviations and acronyms in some regulatory domains
4. General description
	4.1 General description of the architecture
	4.2 How wireless local area networks (WLANs) are different
		4.2.1 Introduction
		4.2.2 Wireless station (STA)
		4.2.3 Media impact on design and performance
		4.2.4 The impact of handling mobile STAs
		4.2.5 Interaction with other IEEE 802® layers
		4.2.6 Interaction with non-IEEE-802 protocols
	4.3 Components of the IEEE 802.11 architecture
		4.3.1 General
		4.3.2 The independent BSS (IBSS)
		4.3.3 The personal BSS (PBSS)
		4.3.4 STA membership in a BSS is dynamic
		4.3.5 Distribution system (DS) concepts
			4.3.5.1 Overview
			4.3.5.2 Extended service set (ESS): the large coverage network
		4.3.6 Area concepts
		4.3.7 Integration with non-IEEE-802.11 LANs
		4.3.8 Robust security network association (RSNA)
		4.3.9 Centralized coordination service set (CCSS) and extended centralized AP or PCP clustering (ECAPC)
		4.3.10 QoS BSS
		4.3.11 Wireless LAN radio measurements
			4.3.11.1 General
			4.3.11.2 Beacon
			4.3.11.3 Measurement pilot
			4.3.11.4 Frame
			4.3.11.5 Channel load
			4.3.11.6 Noise histogram
			4.3.11.7 STA statistics
			4.3.11.8 Location
			4.3.11.9 Measurement pause
			4.3.11.10 Neighbor report
			4.3.11.11 Link measurement
			4.3.11.12 Transmit stream/category measurement
		4.3.12 Operation in licensed frequency bands
			4.3.12.1 General
			4.3.12.2 Dynamic STA enablement (DSE) in licensed bands
			4.3.12.3 Contention based protocol (CBP) in nonexclusively licensed bands
			4.3.12.4 Using DSE STA identification to resolve interference
			4.3.12.5 Further coexistence enhancements in nonexclusively licensed bands
		4.3.13 High-throughput (HT) STA
		4.3.14 Very high throughput (VHT) STA
		4.3.15 Television very high throughput (TVHT) STA
		4.3.16 STA transmission of Data frames outside the context of a BSS
		4.3.17 Tunneled direct-link setup
		4.3.18 Wireless network management
			4.3.18.1 Overview
			4.3.18.2 BSS max idle period management
			4.3.18.3 BSS transition management
			4.3.18.4 Channel usage
			4.3.18.5 Collocated interference reporting
			4.3.18.6 Diagnostic reporting
			4.3.18.7 Directed multicast service (DMS)
			4.3.18.8 Event reporting
			4.3.18.9 Flexible multicast service (FMS)
			4.3.18.10 Location services
			4.3.18.11 Multicast Diagnostic report
			4.3.18.12 Multiple BSSID capability
			4.3.18.13 Proxy ARP
			4.3.18.14 QoS traffic capability
			4.3.18.15 SSID list
			4.3.18.16 Triggered STA statistics
			4.3.18.17 TIM broadcast
			4.3.18.18 Timing measurement
			4.3.18.19 Fine timing measurement
			4.3.18.20 Traffic filtering service
			4.3.18.21 U-APSD coexistence
			4.3.18.22 WNM notification
			4.3.18.23 WNM sleep mode
		4.3.19 Subscription service provider network (SSPN) interface
		4.3.20 Mesh BSS
			4.3.20.1 General
			4.3.20.2 Overview of the mesh BSS
			4.3.20.3 Mesh STA
			4.3.20.4 IEEE 802.11 components and mesh BSS
			4.3.20.5 Introduction to mesh functions
				4.3.20.5.1 General
				4.3.20.5.2 Mesh discovery
				4.3.20.5.3 Mesh peering management (MPM)
				4.3.20.5.4 Mesh security
				4.3.20.5.5 Mesh beaconing and synchronization
				4.3.20.5.6 Mesh coordination function (MCF)
				4.3.20.5.7 Mesh power management
				4.3.20.5.8 Mesh channel switching
				4.3.20.5.9 Frame addressing in an MBSS
				4.3.20.5.10 Mesh path selection and forwarding
				4.3.20.5.11 Interworking with the DS
				4.3.20.5.12 Intra-mesh congestion control
				4.3.20.5.13 Emergency service support in mesh BSS
		4.3.21 DMG STA
		4.3.22 DMG relay
		4.3.23 Robust audio video (AV) streaming
			4.3.23.1 Groupcast with retries (GCR)
			4.3.23.2 Stream classification service (SCS)
			4.3.23.3 Overlapping BSS (OBSS) management
			4.3.23.4 Interworking with IEEE 802.1Q™ Stream Reservation Protocol (SRP)
			4.3.23.5 Intra-access category prioritization
		4.3.24 Operation under geolocation database (GDB) control
	4.4 Logical service interfaces
		4.4.1 General
		4.4.2 SS
		4.4.3 PBSS control point service (PCPS)
		4.4.4 DSS
	4.5 Overview of the services
		4.5.1 General
		4.5.2 Distribution of MSDUs within a DS
			4.5.2.1 Distribution
			4.5.2.2 Integration
			4.5.2.3 QoS traffic scheduling
		4.5.3 Services that support the distribution service and the PCP service
			4.5.3.1 General
			4.5.3.2 Mobility types
			4.5.3.3 Association
			4.5.3.4 Reassociation
			4.5.3.5 Disassociation
		4.5.4 Access control and data confidentiality services
			4.5.4.1 General
			4.5.4.2 Authentication
			4.5.4.3 Deauthentication
			4.5.4.4 Data confidentiality
			4.5.4.5 Key management
			4.5.4.6 Data origin authenticity
			4.5.4.7 Replay detection
			4.5.4.8 Fast BSS transition
			4.5.4.9 Robust management frame protection
		4.5.5 Spectrum management services
			4.5.5.1 General
			4.5.5.2 TPC
			4.5.5.3 DFS
		4.5.6 Traffic differentiation and QoS support
			4.5.6.1 General
			4.5.6.2 Quality-of-service management frame support
		4.5.7 Support for higher layer timer synchronization
		4.5.8 Radio measurement service
		4.5.9 Interworking with external networks
		4.5.10 Generic advertisement service (GAS)
	4.6 Multiple logical address spaces
	4.7 Differences among ESS, PBSS, and IBSS LANs
	4.8 Differences between ESS and MBSS LANs
	4.9 Reference model
		4.9.1 General
		4.9.2 Interworking reference model
		4.9.3 Reference model for supporting multiple MAC sublayers
		4.9.4 Reference model for multi-band operation
	4.10 IEEE Std 802.11 and IEEE Std 802.1X-2010
		4.10.1 General
		4.10.2 IEEE 802.11 usage of IEEE Std 802.1X-2010
		4.10.3 Infrastructure functional model overview
			4.10.3.1 General
			4.10.3.2 AKM operations with AS
			4.10.3.3 AKM operations with a password or PSK
			4.10.3.4 Alternate operations with PSK
			4.10.3.5 Disassociation
		4.10.4 IBSS functional model description
			4.10.4.1 General
			4.10.4.2 Key usage
			4.10.4.3 Sample IBSS 4-way handshakes
			4.10.4.4 IBSS IEEE 802.1X example
		4.10.5 PBSS functional model description
		4.10.6 Authenticator-to-AS protocol
		4.10.7 PMKSA caching
		4.10.8 Protection of group addressed robust Management frames
5. MAC service definition
	5.1 Overview of MAC services
		5.1.1 Data service
			5.1.1.1 General
			5.1.1.2 Determination of UP
			5.1.1.3 Interpretation of priority parameter in MAC service primitives
			5.1.1.4 Interpretation of service class parameter in MAC service primitives in a STA
		5.1.2 Security services
		5.1.3 MSDU ordering
		5.1.4 MSDU format
		5.1.5 MAC data service architecture
			5.1.5.1 General
			5.1.5.2 Non-AP STA role
			5.1.5.3 AP role
			5.1.5.4 Mesh STA role
			5.1.5.5 Mesh gate role
	5.2 MAC data service specification
		5.2.1 General
		5.2.2 MA-UNITDATA.request
			5.2.2.1 Function
			5.2.2.2 Semantics of the service primitive
			5.2.2.3 When generated
			5.2.2.4 Effect of receipt
		5.2.3 MA-UNITDATA.indication
			5.2.3.1 Function
			5.2.3.2 Semantics of the service primitive
			5.2.3.3 When generated
			5.2.3.4 Effect of receipt
		5.2.4 MA-UNITDATA-STATUS.indication
			5.2.4.1 Function
			5.2.4.2 Semantics of the service primitive
			5.2.4.3 When generated
			5.2.4.4 Effect of receipt
6. Layer management
	6.1 Overview of management model
	6.2 Generic management primitives
	6.3 MLME SAP interface
		6.3.1 Introduction
		6.3.2 Power management
			6.3.2.1 Introduction
			6.3.2.2 MLME-POWERMGT.request
				6.3.2.2.1 Function
				6.3.2.2.2 Semantics of the service primitive
				6.3.2.2.3 When generated
				6.3.2.2.4 Effect of receipt
			6.3.2.3 MLME-POWERMGT.confirm
				6.3.2.3.1 Function
				6.3.2.3.2 Semantics of the service primitive
				6.3.2.3.3 When generated
				6.3.2.3.4 Effect of receipt
		6.3.3 Scan
			6.3.3.1 Introduction
			6.3.3.2 MLME-SCAN.request
				6.3.3.2.1 Function
				6.3.3.2.2 Semantics of the service primitive
				6.3.3.2.3 When generated
				6.3.3.2.4 Effect of receipt
			6.3.3.3 MLME-SCAN.confirm
				6.3.3.3.1 Function
				6.3.3.3.2 Semantics of the service primitive
				6.3.3.3.3 When generated
				6.3.3.3.4 Effect of receipt
		6.3.4 Synchronization
			6.3.4.1 Introduction
			6.3.4.2 MLME-JOIN.request
				6.3.4.2.1 Function
				6.3.4.2.2 Semantics of the service primitive
				6.3.4.2.3 When generated
				6.3.4.2.4 Effect of receipt
			6.3.4.3 MLME-JOIN.confirm
				6.3.4.3.1 Function
				6.3.4.3.2 Semantics of the service primitive
				6.3.4.3.3 When generated
				6.3.4.3.4 Effect of receipt
		6.3.5 Authenticate
			6.3.5.1 Introduction
			6.3.5.2 MLME-AUTHENTICATE.request
				6.3.5.2.1 Function
				6.3.5.2.2 Semantics of the service primitive
				6.3.5.2.3 When generated
				6.3.5.2.4 Effect of receipt
			6.3.5.3 MLME-AUTHENTICATE.confirm
				6.3.5.3.1 Function
				6.3.5.3.2 Semantics of the service primitive
				6.3.5.3.3 When generated
				6.3.5.3.4 Effect of receipt
			6.3.5.4 MLME-AUTHENTICATE.indication
				6.3.5.4.1 Function
				6.3.5.4.2 Semantics of the service primitive
				6.3.5.4.3 When generated
				6.3.5.4.4 Effect of receipt
			6.3.5.5 MLME-AUTHENTICATE.response
				6.3.5.5.1 Function
				6.3.5.5.2 Semantics of the service primitive
				6.3.5.5.3 When generated
				6.3.5.5.4 Effect of receipt
		6.3.6 Deauthenticate
			6.3.6.1 Introduction
			6.3.6.2 MLME-DEAUTHENTICATE.request
				6.3.6.2.1 Function
				6.3.6.2.2 Semantics of the service primitive
				6.3.6.2.3 When generated
				6.3.6.2.4 Effect of receipt
			6.3.6.3 MLME-DEAUTHENTICATE.confirm
				6.3.6.3.1 Function
				6.3.6.3.2 Semantics of the service primitive
				6.3.6.3.3 When generated
				6.3.6.3.4 Effect of receipt
			6.3.6.4 MLME-DEAUTHENTICATE.indication
				6.3.6.4.1 Function
				6.3.6.4.2 Semantics of the service primitive
				6.3.6.4.3 When generated
				6.3.6.4.4 Effect of receipt
		6.3.7 Associate
			6.3.7.1 Introduction
			6.3.7.2 MLME-ASSOCIATE.request
				6.3.7.2.1 Function
				6.3.7.2.2 Semantics of the service primitive
				6.3.7.2.3 When generated
				6.3.7.2.4 Effect of receipt
			6.3.7.3 MLME-ASSOCIATE.confirm
				6.3.7.3.1 Function
				6.3.7.3.2 Semantics of the service primitive
				6.3.7.3.3 When generated
				6.3.7.3.4 Effect of receipt
			6.3.7.4 MLME-ASSOCIATE.indication
				6.3.7.4.1 Function
				6.3.7.4.2 Semantics of the service primitive
				6.3.7.4.3 When generated
				6.3.7.4.4 Effect of receipt
			6.3.7.5 MLME-ASSOCIATE.response
				6.3.7.5.1 Function
				6.3.7.5.2 Semantics of the service primitive
				6.3.7.5.3 When generated
				6.3.7.5.4 Effect of receipt
		6.3.8 Reassociate
			6.3.8.1 Introduction
			6.3.8.2 MLME-REASSOCIATE.request
				6.3.8.2.1 Function
				6.3.8.2.2 Semantics of the service primitive
				6.3.8.2.3 When generated
				6.3.8.2.4 Effect of receipt
			6.3.8.3 MLME-REASSOCIATE.confirm
				6.3.8.3.1 Function
				6.3.8.3.2 Semantics of the service primitive
				6.3.8.3.3 When generated
				6.3.8.3.4 Effect of receipt
			6.3.8.4 MLME-REASSOCIATE.indication
				6.3.8.4.1 Function
				6.3.8.4.2 Semantics of the service primitive
				6.3.8.4.3 When generated
				6.3.8.4.4 Effect of receipt
			6.3.8.5 MLME-REASSOCIATE.response
				6.3.8.5.1 Function
				6.3.8.5.2 Semantics of the service primitive
				6.3.8.5.3 When generated
				6.3.8.5.4 Effect of receipt
		6.3.9 Disassociate
			6.3.9.1 MLME-DISASSOCIATE.request
				6.3.9.1.1 Function
				6.3.9.1.2 Semantics of the service primitive
				6.3.9.1.3 When generated
				6.3.9.1.4 Effect of receipt
			6.3.9.2 MLME-DISASSOCIATE.confirm
				6.3.9.2.1 Function
				6.3.9.2.2 Semantics of the service primitive
				6.3.9.2.3 When generated
				6.3.9.2.4 Effect of receipt
			6.3.9.3 MLME-DISASSOCIATE.indication
				6.3.9.3.1 Function
				6.3.9.3.2 Semantics of the service primitive
				6.3.9.3.3 When generated
				6.3.9.3.4 Effect of receipt
		6.3.10 Reset
			6.3.10.1 Introduction
			6.3.10.2 MLME-RESET.request
				6.3.10.2.1 Function
				6.3.10.2.2 Semantics of the service primitive
				6.3.10.2.3 When generated
				6.3.10.2.4 Effect of receipt
		6.3.11 Start
			6.3.11.1 Introduction
			6.3.11.2 MLME-START.request
				6.3.11.2.1 Function
				6.3.11.2.2 Semantics of the service primitive
				6.3.11.2.3 When generated
				6.3.11.2.4 Effect of receipt
			6.3.11.3 MLME-START.confirm
				6.3.11.3.1 Function
				6.3.11.3.2 Semantics of the service primitive
				6.3.11.3.3 When generated
				6.3.11.3.4 Effect of receipt
		6.3.12 Stop
			6.3.12.1 General
			6.3.12.2 MLME-STOP.request
				6.3.12.2.1 Function
				6.3.12.2.2 Semantics of the service primitive
				6.3.12.2.3 When generated
				6.3.12.2.4 Effect of receipt
		6.3.13 Protocol layer model for spectrum management and radio measurement
		6.3.14 Measurement request
			6.3.14.1 Introduction
			6.3.14.2 MLME-MREQUEST.request
				6.3.14.2.1 Function
				6.3.14.2.2 Semantics of the service primitive
				6.3.14.2.3 When generated
				6.3.14.2.4 Effect of receipt
			6.3.14.3 MLME-MREQUEST.indication
				6.3.14.3.1 Function
				6.3.14.3.2 Semantics of the service primitive
				6.3.14.3.3 When generated
				6.3.14.3.4 Effect of receipt
		6.3.15 Channel measurement
			6.3.15.1 Introduction
			6.3.15.2 MLME-MEASURE.request
				6.3.15.2.1 Function
				6.3.15.2.2 Semantics of the service primitive
				6.3.15.2.3 When generated
				6.3.15.2.4 Effect of receipt
			6.3.15.3 MLME-MEASURE.confirm
				6.3.15.3.1 Function
				6.3.15.3.2 Semantics of the service primitive
				6.3.15.3.3 When generated
				6.3.15.3.4 Effect of receipt
		6.3.16 Measurement report
			6.3.16.1 Introduction
			6.3.16.2 MLME-MREPORT.request
				6.3.16.2.1 Function
				6.3.16.2.2 Semantics of the service primitive
				6.3.16.2.3 When generated
				6.3.16.2.4 Effect of receipt
			6.3.16.3 MLME-MREPORT.indication
				6.3.16.3.1 Function
				6.3.16.3.2 Semantics of the service primitive
				6.3.16.3.3 When generated
				6.3.16.3.4 Effect of receipt
		6.3.17 Channel switch
			6.3.17.1 MLME-CHANNELSWITCH.request
				6.3.17.1.1 Function
				6.3.17.1.2 Semantics of the service primitive
				6.3.17.1.3 When generated
				6.3.17.1.4 Effect of receipt
			6.3.17.2 MLME-CHANNELSWITCH.confirm
				6.3.17.2.1 Function
				6.3.17.2.2 Semantics of the service primitive
				6.3.17.2.3 When generated
				6.3.17.2.4 Effect of receipt
			6.3.17.3 MLME-CHANNELSWITCH.indication
				6.3.17.3.1 Function
				6.3.17.3.2 Semantics of the service primitive
				6.3.17.3.3 When generated
				6.3.17.3.4 Effect of receipt
			6.3.17.4 MLME-CHANNELSWITCH.response
				6.3.17.4.1 Function
				6.3.17.4.2 Semantics of the service primitive
				6.3.17.4.3 When generated
				6.3.17.4.4 Effect of receipt
		6.3.18 TPC request
			6.3.18.1 Introduction
			6.3.18.2 MLME-TPCADAPT.request
				6.3.18.2.1 Function
				6.3.18.2.2 Semantics of the service primitive
				6.3.18.2.3 When generated
				6.3.18.2.4 Effect of receipt
			6.3.18.3 MLME-TPCADAPT.confirm
				6.3.18.3.1 Function
				6.3.18.3.2 Semantics of the service primitive
				6.3.18.3.3 When generated
				6.3.18.3.4 Effect of receipt
		6.3.19 SetKeys
			6.3.19.1 MLME-SETKEYS.request
				6.3.19.1.1 Function
				6.3.19.1.2 Semantics of the service primitive
				6.3.19.1.3 When generated
				6.3.19.1.4 Effect of receipt
		6.3.20 DeleteKeys
			6.3.20.1 MLME-DELETEKEYS.request
				6.3.20.1.1 Function
				6.3.20.1.2 Semantics of the service primitive
				6.3.20.1.3 When generated
				6.3.20.1.4 Effect of receipt
		6.3.21 MIC (michael) failure event
			6.3.21.1 MLME-MICHAELMICFAILURE.indication
				6.3.21.1.1 Function
				6.3.21.1.2 Semantics of the service primitive
				6.3.21.1.3 When generated
				6.3.21.1.4 Effect of receipt
		6.3.22 EAPOL
			6.3.22.1 MLME-EAPOL.request
				6.3.22.1.1 Function
				6.3.22.1.2 Semantics of the service primitive
				6.3.22.1.3 When generated
				6.3.22.1.4 Effect of receipt
			6.3.22.2 MLME-EAPOL.confirm
				6.3.22.2.1 Function
				6.3.22.2.2 Semantics of the service primitive
				6.3.22.2.3 When generated
				6.3.22.2.4 Effect of receipt
		6.3.23 MLME-PEERKEY-START
			6.3.23.1 MLME-PEERKEY-START.request
				6.3.23.1.1 Function
				6.3.23.1.2 Semantics of the service primitive
				6.3.23.1.3 When generated
				6.3.23.1.4 Effect of receipt
		6.3.24 SetProtection
			6.3.24.1 MLME-SETPROTECTION.request
				6.3.24.1.1 Function
				6.3.24.1.2 Semantics of the service primitive
				6.3.24.1.3 When generated
				6.3.24.1.4 Effect of receipt
		6.3.25 MLME-PROTECTEDFRAMEDROPPED
			6.3.25.1 MLME- PROTECTEDFRAMEDROPPED.indication
				6.3.25.1.1 Function
				6.3.25.1.2 Semantics of the service primitive
				6.3.25.1.3 When generated
				6.3.25.1.4 Effect of receipt
		6.3.26 TS management interface
			6.3.26.1 General
			6.3.26.2 MLME-ADDTS.request
				6.3.26.2.1 Function
				6.3.26.2.2 Semantics of the service primitive
				6.3.26.2.3 When generated
				6.3.26.2.4 Effect of receipt
			6.3.26.3 MLME-ADDTS.confirm
				6.3.26.3.1 Function
				6.3.26.3.2 Semantics of the service primitive
				6.3.26.3.3 When generated
				6.3.26.3.4 Effect of receipt
			6.3.26.4 MLME-ADDTS.indication
				6.3.26.4.1 Function
				6.3.26.4.2 Semantics of the service primitive
				6.3.26.4.3 When generated
				6.3.26.4.4 Effect of receipt
			6.3.26.5 MLME-ADDTS.response
				6.3.26.5.1 Function
				6.3.26.5.2 Semantics of the service primitive
				6.3.26.5.3 When generated
				6.3.26.5.4 Effect of receipt
			6.3.26.6 MLME-DELTS.request
				6.3.26.6.1 Function
				6.3.26.6.2 Semantics of the service primitive
				6.3.26.6.3 When generated
				6.3.26.6.4 Effect of receipt
			6.3.26.7 MLME-DELTS.indication
				6.3.26.7.1 Function
				6.3.26.7.2 Semantics of the service primitive
				6.3.26.7.3 When generated
				6.3.26.7.4 Effect of receipt
			6.3.26.8 MLME-ADDTSRESERVE.request
				6.3.26.8.1 Function
				6.3.26.8.2 Semantics of the service primitive
				6.3.26.8.3 When generated
				6.3.26.8.4 Effect of receipt
			6.3.26.9 MLME-ADDTSRESERVE.confirm
				6.3.26.9.1 Function
				6.3.26.9.2 Semantics of the service primitive
				6.3.26.9.3 When generated
				6.3.26.9.4 Effect of receipt
			6.3.26.10 MLME-ADDTSRESERVE.indication
				6.3.26.10.1 Function
				6.3.26.10.2 Semantics of the service primitive
				6.3.26.10.3 When generated
				6.3.26.10.4 Effect of receipt
			6.3.26.11 MLME-ADDTSRESERVE.response
				6.3.26.11.1 Function
				6.3.26.11.2 Semantics of the service primitive
				6.3.26.11.3 When generated
				6.3.26.11.4 Effect of receipt
		6.3.27 Management of direct links
			6.3.27.1 Introduction
			6.3.27.2 MLME-DLS.request
				6.3.27.2.1 Function
				6.3.27.2.2 Semantics of the service primitive
				6.3.27.2.3 When generated
				6.3.27.2.4 Effect of receipt
			6.3.27.3 MLME-DLS.confirm
				6.3.27.3.1 Function
				6.3.27.3.2 Semantics of the service primitive
				6.3.27.3.3 When generated
				6.3.27.3.4 Effect of receipt
			6.3.27.4 MLME-DLS.indication
				6.3.27.4.1 Function
				6.3.27.4.2 Semantics of the service primitive
				6.3.27.4.3 When generated
				6.3.27.4.4 Effect of receipt
			6.3.27.5 MLME-DLS.response
				6.3.27.5.1 Function
				6.3.27.5.2 Semantics of the service primitive
				6.3.27.5.3 When generated
				6.3.27.5.4 Effect of receipt
			6.3.27.6 MLME-DLS-TEARDOWN.request
				6.3.27.6.1 Function
				6.3.27.6.2 Semantics of the service primitive
				6.3.27.6.3 When generated
				6.3.27.6.4 Effect of receipt
			6.3.27.7 MLME-DLS-TEARDOWN.indication
				6.3.27.7.1 Function
				6.3.27.7.2 Semantics of the service primitive
				6.3.27.7.3 When generated
				6.3.27.7.4 Effect of receipt
		6.3.28 Higher layer synchronization support
			6.3.28.1 Introduction
			6.3.28.2 MLME-HL-SYNC.request
				6.3.28.2.1 Function
				6.3.28.2.2 Semantics of the service primitive
				6.3.28.2.3 When generated
				6.3.28.2.4 Effect of Receipt
			6.3.28.3 MLME-HL-SYNC.indication
				6.3.28.3.1 Function
				6.3.28.3.2 Semantics of the service primitive
				6.3.28.3.3 When generated
				6.3.28.3.4 Effect of receipt
		6.3.29 Block Ack
			6.3.29.1 General
			6.3.29.2 MLME-ADDBA.request
				6.3.29.2.1 Function
				6.3.29.2.2 Semantics of the service primitive
				6.3.29.2.3 When generated
				6.3.29.2.4 Effect of receipt
			6.3.29.3 MLME-ADDBA.confirm
				6.3.29.3.1 Function
				6.3.29.3.2 Semantics of the service primitive
				6.3.29.3.3 When generated
				6.3.29.3.4 Effect of receipt
			6.3.29.4 MLME-ADDBA.indication
				6.3.29.4.1 Function
				6.3.29.4.2 Semantics of the service primitive
				6.3.29.4.3 When generated
				6.3.29.4.4 Effect of receipt
			6.3.29.5 MLME-ADDBA.response
				6.3.29.5.1 Function
				6.3.29.5.2 Semantics of the service primitive
				6.3.29.5.3 When generated
				6.3.29.5.4 Effect of receipt
			6.3.29.6 MLME-DELBA.request
				6.3.29.6.1 Function
				6.3.29.6.2 Semantics of the service primitive
				6.3.29.6.3 When generated
				6.3.29.6.4 Effect of receipt
			6.3.29.7 MLME-DELBA.indication
				6.3.29.7.1 Function
				6.3.29.7.2 Semantics of the service primitive
				6.3.29.7.3 When generated
				6.3.29.7.4 Effect of receipt
		6.3.30 Schedule element management
			6.3.30.1 Introduction
			6.3.30.2 MLME-SCHEDULE.request
				6.3.30.2.1 Function
				6.3.30.2.2 Semantics of the service primitive
				6.3.30.2.3 When generated
				6.3.30.2.4 Effect of receipt
			6.3.30.3 MLME-SCHEDULE.indication
				6.3.30.3.1 Function
				6.3.30.3.2 Semantics of the service primitive
				6.3.30.3.3 When generated
				6.3.30.3.4 Effect of receipt
		6.3.31 Vendor-specific action
			6.3.31.1 Introduction
			6.3.31.2 MLME-VSPECIFIC.request
				6.3.31.2.1 Function
				6.3.31.2.2 Semantics of the service primitive
				6.3.31.2.3 When generated
				6.3.31.2.4 Effect of receipt
			6.3.31.3 MLME-VSPECIFIC.indication
				6.3.31.3.1 Function
				6.3.31.3.2 Semantics of the service primitive
				6.3.31.3.3 When generated
				6.3.31.3.4 Effect of receipt
		6.3.32 Neighbor report request
			6.3.32.1 General
			6.3.32.2 MLME-NEIGHBORREPREQ.request
				6.3.32.2.1 Function
				6.3.32.2.2 Semantics of the service primitive
				6.3.32.2.3 When generated
				6.3.32.2.4 Effect of receipt
			6.3.32.3 MLME-NEIGHBORREPREQ.indication
				6.3.32.3.1 Function
				6.3.32.3.2 Semantics of the service primitive
				6.3.32.3.3 When generated
				6.3.32.3.4 Effect of receipt
		6.3.33 Neighbor report response
			6.3.33.1 General
			6.3.33.2 MLME-NEIGHBORREPRESP.request
				6.3.33.2.1 Function
				6.3.33.2.2 Semantics of the service primitive
				6.3.33.2.3 When generated
				6.3.33.2.4 Effect of receipt
			6.3.33.3 MLME-NEIGHBORREPRESP.indication
				6.3.33.3.1 Function
				6.3.33.3.2 Semantics of the service primitive
				6.3.33.3.3 When generated
				6.3.33.3.4 Effect of receipt
		6.3.34 Link Measure Request
			6.3.34.1 General
			6.3.34.2 MLME-LINKMEASURE.request
				6.3.34.2.1 Function
				6.3.34.2.2 Semantics of the service primitive
				6.3.34.2.3 When generated
				6.3.34.2.4 Effect of receipt
			6.3.34.3 MLME-LINKMEASURE.confirm
				6.3.34.3.1 Function
				6.3.34.3.2 Semantics of the service primitive
				6.3.34.3.3 When generated
				6.3.34.3.4 Effect of receipt
		6.3.35 MLME SAP interface for resource request
			6.3.35.1 MLME-RESOURCE-REQUEST.request
				6.3.35.1.1 Function
				6.3.35.1.2 Semantics of the service primitive
				6.3.35.1.3 When generated
				6.3.35.1.4 Effect of receipt
			6.3.35.2 MLME-RESOURCE-REQUEST.indication
				6.3.35.2.1 Function
				6.3.35.2.2 Semantics of the service primitive
				6.3.35.2.3 When generated
				6.3.35.2.4 Effect of receipt
			6.3.35.3 MLME-RESOURCE-REQUEST.response
				6.3.35.3.1 Function
				6.3.35.3.2 Semantics of the service primitive
				6.3.35.3.3 When generated
				6.3.35.3.4 Effect of receipt
			6.3.35.4 MLME-RESOURCE-REQUEST.confirm
				6.3.35.4.1 Function
				6.3.35.4.2 Semantics of the service primitive
				6.3.35.4.3 When generated
				6.3.35.4.4 Effect of receipt
			6.3.35.5 MLME-RESOURCE-REQUEST-LOCAL.request
				6.3.35.5.1 Function
				6.3.35.5.2 Semantics of the service primitive
				6.3.35.5.3 When generated
				6.3.35.5.4 Effect of receipt
			6.3.35.6 MLME-RESOURCE-REQUEST-LOCAL.confirm
				6.3.35.6.1 Function
				6.3.35.6.2 Semantics of the service primitive
				6.3.35.6.3 When generated
				6.3.35.6.4 Effect of receipt
		6.3.36 MLME SAP interface for remote requests
			6.3.36.1 MLME-REMOTE-REQUEST.request
				6.3.36.1.1 Function
				6.3.36.1.2 Semantics of the service primitive
				6.3.36.1.3 When generated
				6.3.36.1.4 Effect of receipt
			6.3.36.2 MLME-REMOTE-REQUEST.indication
				6.3.36.2.1 Function
				6.3.36.2.2 Semantics of the service primitive
				6.3.36.2.3 When generated
				6.3.36.2.4 Effect of receipt
		6.3.37 Extended channel switch announcement
			6.3.37.1 General
			6.3.37.2 MLME-EXTCHANNELSWITCH.request
				6.3.37.2.1 Function
				6.3.37.2.2 Semantics of the service primitive
				6.3.37.2.3 When generated
				6.3.37.2.4 Effect of receipt
			6.3.37.3 MLME-EXTCHANNELSWITCH.confirm
				6.3.37.3.1 Function
				6.3.37.3.2 Semantics of the service primitive
				6.3.37.3.3 When generated
				6.3.37.3.4 Effect of receipt
			6.3.37.4 MLME-EXTCHANNELSWITCH.indication
				6.3.37.4.1 Function
				6.3.37.4.2 Semantics of the service primitive
				6.3.37.4.3 When generated
				6.3.37.4.4 Effect of receipt
			6.3.37.5 MLME-EXTCHANNELSWITCH.response
				6.3.37.5.1 Function
				6.3.37.5.2 Semantics of the service primitive
				6.3.37.5.3 When generated
				6.3.37.5.4 Effect of receipt
		6.3.38 DSE power constraint announcement
			6.3.38.1 General
			6.3.38.2 MLME-DSETPC.request
				6.3.38.2.1 Function
				6.3.38.2.2 Semantics of the service primitive
				6.3.38.2.3 When generated
				6.3.38.2.4 Effect of receipt
			6.3.38.3 MLME-DSETPC.confirm
				6.3.38.3.1 Function
				6.3.38.3.2 Semantics of the service primitive
				6.3.38.3.3 When generated
				6.3.38.3.4 Effect of receipt
			6.3.38.4 MLME-DSETPC.indication
				6.3.38.4.1 Function
				6.3.38.4.2 Semantics of the service primitive
				6.3.38.4.3 When generated
				6.3.38.4.4 Effect of receipt
			6.3.38.5 MLME-DSETPC.response
				6.3.38.5.1 Function
				6.3.38.5.2 Semantics of the service primitive
				6.3.38.5.3 When generated
				6.3.38.5.4 Effect of receipt
		6.3.39 Enablement
			6.3.39.1 General
			6.3.39.2 MLME-ENABLEMENT.request
				6.3.39.2.1 Function
				6.3.39.2.2 Semantics of the service primitive
				6.3.39.2.3 When generated
				6.3.39.2.4 Effect of receipt
			6.3.39.3 MLME-ENABLEMENT.confirm
				6.3.39.3.1 Function
				6.3.39.3.2 Semantics of the service primitive
				6.3.39.3.3 When generated
				6.3.39.3.4 Effect of receipt
			6.3.39.4 MLME-ENABLEMENT.indication
				6.3.39.4.1 Function
				6.3.39.4.2 Semantics of the service primitive
				6.3.39.4.3 When generated
				6.3.39.4.4 Effect of receipt
			6.3.39.5 MLME-ENABLEMENT.response
				6.3.39.5.1 Function
				6.3.39.5.2 Semantics of the service primitive
				6.3.39.5.3 When generated
				6.3.39.5.4 Effect of receipt
		6.3.40 Deenablement
			6.3.40.1 MLME-DEENABLEMENT.request
				6.3.40.1.1 Function
				6.3.40.1.2 Semantics of the service primitive
				6.3.40.1.3 When generated
				6.3.40.1.4 Effect of receipt
			6.3.40.2 MLME-DEENABLEMENT.indication
				6.3.40.2.1 Function
				6.3.40.2.2 Semantics of the service primitive
				6.3.40.2.3 When generated
				6.3.40.2.4 Effect of receipt
		6.3.41 SA Query support
			6.3.41.1 MLME-SA-QUERY.request
				6.3.41.1.1 Function
				6.3.41.1.2 Semantics of the service primitive
				6.3.41.1.3 When generated
				6.3.41.1.4 Effect of receipt
			6.3.41.2 MLME-SA-QUERY.confirm
				6.3.41.2.1 Function
				6.3.41.2.2 Semantics of the service primitive
				6.3.41.2.3 When generated
				6.3.41.2.4 Effect of receipt
			6.3.41.3 MLME-SA-QUERY.indication
				6.3.41.3.1 Function
				6.3.41.3.2 Semantics of the service primitive
				6.3.41.3.3 When generated
				6.3.41.3.4 Effect of receipt
			6.3.41.4 MLME-SA-QUERY.response
				6.3.41.4.1 Function
				6.3.41.4.2 Semantics of the service primitive
				6.3.41.4.3 When generated
				6.3.41.4.4 Effect of receipt
		6.3.42 Get TSF timer
			6.3.42.1 General
			6.3.42.2 MLME-GETTSFTIME.request
				6.3.42.2.1 Function
				6.3.42.2.2 Semantics of the service primitive
				6.3.42.2.3 When generated
				6.3.42.2.4 Effect of receipt
			6.3.42.3 MLME-GETTSFTIME.confirm
				6.3.42.3.1 Function
				6.3.42.3.2 Semantics of the service primitive
				6.3.42.3.3 When generated
				6.3.42.3.4 Effect of receipt
		6.3.43 Timing Advertisement
			6.3.43.1 General
			6.3.43.2 MLME-TIMING-ADVERTISEMENT.request
				6.3.43.2.1 Function
				6.3.43.2.2 Semantics of the service primitive
				6.3.43.2.3 When generated
				6.3.43.2.4 Effect of receipt
			6.3.43.3 MLME-TIMING-ADVERTISEMENT.indication
				6.3.43.3.1 Function
				6.3.43.3.2 Semantics of the service primitive
				6.3.43.3.3 When generated
				6.3.43.3.4 Effect of receipt
		6.3.44 TDLS Discovery
			6.3.44.1 General
			6.3.44.2 MLME-TDLSDISCOVERY.request
				6.3.44.2.1 Function
				6.3.44.2.2 Semantics of the service primitive
				6.3.44.2.3 When generated
				6.3.44.2.4 Effect of receipt
			6.3.44.3 MLME-TDLSDISCOVERY.confirm
				6.3.44.3.1 Function
				6.3.44.3.2 Semantics of the service primitive
				6.3.44.3.3 When generated
				6.3.44.3.4 Effect of receipt
			6.3.44.4 MLME-TDLSDISCOVERY.indication
				6.3.44.4.1 Function
				6.3.44.4.2 Semantics of the service primitive
				6.3.44.4.3 When generated
				6.3.44.4.4 Effect of receipt
			6.3.44.5 MLME-TDLSDISCOVERY.response
				6.3.44.5.1 Function
				6.3.44.5.2 Semantics of the service primitive
				6.3.44.5.3 When generated
				6.3.44.5.4 Effect of receipt
		6.3.45 TDLS direct-link establishment
			6.3.45.1 General
			6.3.45.2 MLME-TDLSSETUPREQUEST.request
				6.3.45.2.1 Function
				6.3.45.2.2 Semantics of the service primitive
				6.3.45.2.3 When generated
				6.3.45.2.4 Effect of receipt
			6.3.45.3 MLME-TDLSSETUPREQUEST.indication
				6.3.45.3.1 Function
				6.3.45.3.2 Semantics of the service primitive
				6.3.45.3.3 When generated
				6.3.45.3.4 Effect of receipt
			6.3.45.4 MLME-TDLSSETUPRESPONSE.request
				6.3.45.4.1 Function
				6.3.45.4.2 Semantics of the service primitive
				6.3.45.4.3 When generated
				6.3.45.4.4 Effect of receipt
			6.3.45.5 MLME-TDLSSETUPRESPONSE.indication
				6.3.45.5.1 Function
				6.3.45.5.2 Semantics of the service primitive
				6.3.45.5.3 When generated
				6.3.45.5.4 Effect of receipt
			6.3.45.6 MLME-TDLSSETUPCONFIRM.request
				6.3.45.6.1 Function
				6.3.45.6.2 Semantics of the service primitive
				6.3.45.6.3 When generated
				6.3.45.6.4 Effect of receipt
			6.3.45.7 MLME-TDLSSETUPCONFIRM.indication
				6.3.45.7.1 Function
				6.3.45.7.2 Semantics of the service primitive
				6.3.45.7.3 When generated
				6.3.45.7.4 Effect of receipt
			6.3.45.8 MLME-TDLSPOTENTIALPEERSTA.request
				6.3.45.8.1 Function
				6.3.45.8.2 Semantics of the service primitive
				6.3.45.8.3 When generated
				6.3.45.8.4 Effect of receipt
			6.3.45.9 MLME-TDLSPOTENTIALPEERSTA.confirm
				6.3.45.9.1 Function
				6.3.45.9.2 Semantics of the service primitive
				6.3.45.9.3 When generated
				6.3.45.9.4 Effect of receipt
		6.3.46 TDLS direct-link teardown
			6.3.46.1 General
			6.3.46.2 MLME-TDLSTEARDOWN.request
				6.3.46.2.1 Function
				6.3.46.2.2 Semantics of the service primitive
				6.3.46.2.3 When generated
				6.3.46.2.4 Effect of receipt
			6.3.46.3 MLME-TDLSTEARDOWN.indication
				6.3.46.3.1 Function
				6.3.46.3.2 Semantics of the service primitive
				6.3.46.3.3 When generated
				6.3.46.3.4 Effect of receipt
		6.3.47 TDLS peer U-APSD (TPU)
			6.3.47.1 General
			6.3.47.2 MLME-TDLSPTI.request
				6.3.47.2.1 Function
				6.3.47.2.2 Semantics of the service primitive
				6.3.47.2.3 When generated
				6.3.47.2.4 Effect of receipt
			6.3.47.3 MLME-TDLSPTI.confirm
				6.3.47.3.1 Function
				6.3.47.3.2 Semantics of the service primitive
				6.3.47.3.3 When generated
				6.3.47.3.4 Effect of receipt
			6.3.47.4 MLME-TDLSPTI.indication
				6.3.47.4.1 Function
				6.3.47.4.2 Semantics of the service primitive
				6.3.47.4.3 When generated
				6.3.47.4.4 Effect of receipt
			6.3.47.5 MLME-TDLSPTI.response
				6.3.47.5.1 Function
				6.3.47.5.2 Semantics of the service primitive
				6.3.47.5.3 When generated
				6.3.47.5.4 Effect of receipt
		6.3.48 TDLS channel switching
			6.3.48.1 General
			6.3.48.2 MLME-TDLSCHANNELSWITCH.request
				6.3.48.2.1 Function
				6.3.48.2.2 Semantics of the service primitive
				6.3.48.2.3 When generated
				6.3.48.2.4 Effect of receipt
			6.3.48.3 MLME-TDLSCHANNELSWITCH.confirm
				6.3.48.3.1 Function
				6.3.48.3.2 Semantics of the service primitive
				6.3.48.3.3 When generated
				6.3.48.3.4 Effect of receipt
			6.3.48.4 MLME-TDLSCHANNELSWITCH.indication
				6.3.48.4.1 Function
				6.3.48.4.2 Semantics of the service primitive
				6.3.48.4.3 When generated
				6.3.48.4.4 Effect of receipt
			6.3.48.5 MLME-TDLSCHANNELSWITCH.response
				6.3.48.5.1 Function
				6.3.48.5.2 Semantics of the service primitive
				6.3.48.5.3 When generated
				6.3.48.5.4 Effect of receipt
		6.3.49 TDLS peer PSM
			6.3.49.1 General
			6.3.49.2 MLME-TDLSPEERPSM.request
				6.3.49.2.1 Function
				6.3.49.2.2 Semantics of the service primitive
				6.3.49.2.3 When generated
				6.3.49.2.4 Effect of receipt
			6.3.49.3 MLME-TDLSPEERPSM.confirm
				6.3.49.3.1 Function
				6.3.49.3.2 Semantics of the service primitive
				6.3.49.3.3 When generated
				6.3.49.3.4 Effect of receipt
			6.3.49.4 MLME-TDLSPEERPSM.indication
				6.3.49.4.1 Function
				6.3.49.4.2 Semantics of the service primitive
				6.3.49.4.3 When generated
				6.3.49.4.4 Effect of receipt
			6.3.49.5 MLME-TDLSPEERPSM.response
				6.3.49.5.1 Function
				6.3.49.5.2 Semantics of the service primitive
				6.3.49.5.3 When generated
				6.3.49.5.4 Effect of receipt
		6.3.50 Event request
			6.3.50.1 General
			6.3.50.2 MLME-EVLREQUEST.request
				6.3.50.2.1 Function
				6.3.50.2.2 Semantics of the service primitive
				6.3.50.2.3 When generated
				6.3.50.2.4 Effect of receipt
			6.3.50.3 MLME-EVLREQUEST.indication
				6.3.50.3.1 Function
				6.3.50.3.2 Semantics of the service primitive
				6.3.50.3.3 When generated
				6.3.50.3.4 Effect of receipt
		6.3.51 Event report
			6.3.51.1 General
			6.3.51.2 MLME-EVLREPORT.request
				6.3.51.2.1 Function
				6.3.51.2.2 Semantics of the service primitive
				6.3.51.2.3 When generated
				6.3.51.2.4 Effect of receipt
			6.3.51.3 MLME-EVLREPORT.indication
				6.3.51.3.1 Function
				6.3.51.3.2 Semantics of the service primitive
				6.3.51.3.3 When generated
				6.3.51.3.4 Effect of receipt
		6.3.52 Event
			6.3.52.1 General
			6.3.52.2 MLME-EVLOG.request
				6.3.52.2.1 Function
				6.3.52.2.2 Semantics of the service primitive
				6.3.52.2.3 When generated
				6.3.52.2.4 Effect of receipt
			6.3.52.3 MLME-EVLOG.confirm
				6.3.52.3.1 Function
				6.3.52.3.2 Semantics of the service primitive
				6.3.52.3.3 When generated
				6.3.52.3.4 Effect of receipt
		6.3.53 Diagnostic request
			6.3.53.1 General
			6.3.53.2 MLME-DIAGREQUEST.request
				6.3.53.2.1 Function
				6.3.53.2.2 Semantics of the service primitive
				6.3.53.2.3 When generated
				6.3.53.2.4 Effect of receipt
			6.3.53.3 MLME-DIAGREQUEST.indication
				6.3.53.3.1 Function
				6.3.53.3.2 Semantics of the service primitive
				6.3.53.3.3 When generated
				6.3.53.3.4 Effect of receipt
		6.3.54 Diagnostic report
			6.3.54.1 MLME-DIAGREPORT.request
				6.3.54.1.1 Function
				6.3.54.1.2 Semantics of the service primitive
				6.3.54.1.3 When generated
				6.3.54.1.4 Effect of receipt
			6.3.54.2 MLME-DIAGREPORT.indication
				6.3.54.2.1 Function
				6.3.54.2.2 Semantics of the service primitive
				6.3.54.2.3 When generated
				6.3.54.2.4 Effect of receipt
		6.3.55 Location configuration request
			6.3.55.1 General
			6.3.55.2 MLME-LOCATIONCFG.request
				6.3.55.2.1 Function
				6.3.55.2.2 Semantics of the service primitive
				6.3.55.2.3 When generated
				6.3.55.2.4 Effect of receipt
			6.3.55.3 MLME-LOCATIONCFG.confirm
				6.3.55.3.1 Function
				6.3.55.3.2 Semantics of the service primitive
				6.3.55.3.3 When generated
				6.3.55.3.4 Effect of receipt
			6.3.55.4 MLME-LOCATIONCFG.indication
				6.3.55.4.1 Function
				6.3.55.4.2 Semantics of the service primitive
				6.3.55.4.3 When generated
				6.3.55.4.4 Effect of receipt
			6.3.55.5 MLME-LOCATIONCFG.response
				6.3.55.5.1 Function
				6.3.55.5.2 Semantics of the service primitive
				6.3.55.5.3 When generated
				6.3.55.5.4 Effect of receipt
		6.3.56 Location track notification
			6.3.56.1 General
			6.3.56.2 MLME-LOCATIONTRACKNOTIF.request
				6.3.56.2.1 Function
				6.3.56.2.2 Semantics of the service primitive
				6.3.56.2.3 When generated
				6.3.56.2.4 Effect of receipt
			6.3.56.3 MLME-LOCATIONTRACKNOTIF.indication
				6.3.56.3.1 Function
				6.3.56.3.2 Semantics of the service primitive
				6.3.56.3.3 When generated
				6.3.56.3.4 Effect of receipt
		6.3.57 Timing measurement
			6.3.57.1 General
			6.3.57.2 MLME-TIMINGMSMT.request
				6.3.57.2.1 Function
				6.3.57.2.2 Semantics of the service primitive
				6.3.57.2.3 When generated
				6.3.57.2.4 Effect of receipt
			6.3.57.3 MLME-TIMINGMSMT.confirm
				6.3.57.3.1 Function
				6.3.57.3.2 Semantics of the service primitive
				6.3.57.3.3 When generated
				6.3.57.3.4 Effect of receipt
			6.3.57.4 MLME-TIMINGMSMT.indication
				6.3.57.4.1 Function
				6.3.57.4.2 Semantics of the service primitive
				6.3.57.4.3 When generated
				6.3.57.4.4 Effect of receipt
		6.3.58 Fine timing measurement (FTM)
			6.3.58.1 General
			6.3.58.2 MLME-FINETIMINGMSMT.request
				6.3.58.2.1 Function
				6.3.58.2.2 Semantics of the service primitive
				6.3.58.2.3 When generated
				6.3.58.2.4 Effect of receipt
			6.3.58.3 MLME-FINETIMINGMSMT.confirm
				6.3.58.3.1 Function
				6.3.58.3.2 Semantics of the service primitive
				6.3.58.3.3 When generated
				6.3.58.3.4 Effect of receipt
			6.3.58.4 MLME-FINETIMINGMSMT.indication
				6.3.58.4.1 Function
				6.3.58.4.2 Semantics of the service primitive
				6.3.58.4.3 When generated
				6.3.58.4.4 Effect of receipt
		6.3.59 BSS transition management
			6.3.59.1 BSS transition management procedure
			6.3.59.2 MLME-BTMQUERY.request
				6.3.59.2.1 Function
				6.3.59.2.2 Semantics of the service primitive
				6.3.59.2.3 When generated
				6.3.59.2.4 Effect of receipt
			6.3.59.3 MLME-BTMQUERY.indication
				6.3.59.3.1 Function
				6.3.59.3.2 Semantics of the service primitive
				6.3.59.3.3 When generated
				6.3.59.3.4 Effect of receipt
			6.3.59.4 MLME-BTM.request
				6.3.59.4.1 Function
				6.3.59.4.2 Semantics of the service primitive
				6.3.59.4.3 When generated
				6.3.59.4.4 Effect of receipt
			6.3.59.5 MLME-BTM.indication
				6.3.59.5.1 Function
				6.3.59.5.2 Semantics of the service primitive
				6.3.59.5.3 When generated
				6.3.59.5.4 Effect of receipt
			6.3.59.6 MLME-BTM.response
				6.3.59.6.1 Function
				6.3.59.6.2 Semantics of the service primitive
				6.3.59.6.3 When generated
				6.3.59.6.4 Effect of receipt
			6.3.59.7 MLME-BTM.confirm
				6.3.59.7.1 Function
				6.3.59.7.2 Semantics of the service primitive
				6.3.59.7.3 When generated
				6.3.59.7.4 Effect of receipt
		6.3.60 FMS setup
			6.3.60.1 General
			6.3.60.2 MLME-FMS.request
				6.3.60.2.1 Function
				6.3.60.2.2 Semantics of the service primitive
				6.3.60.2.3 When generated
				6.3.60.2.4 Effect of receipt
			6.3.60.3 MLME-FMS.confirm
				6.3.60.3.1 Function
				6.3.60.3.2 Semantics of the service primitive
				6.3.60.3.3 When generated
				6.3.60.3.4 Effect of receipt
			6.3.60.4 MLME-FMS.indication
				6.3.60.4.1 Function
				6.3.60.4.2 Semantics of the service primitive
				6.3.60.4.3 When generated
				6.3.60.4.4 Effect of receipt
			6.3.60.5 MLME-FMS.response
				6.3.60.5.1 Function
				6.3.60.5.2 Semantics of the service primitive
				6.3.60.5.3 When generated
				6.3.60.5.4 Effect of receipt
		6.3.61 Collocated Interference request
			6.3.61.1 General
			6.3.61.2 MLME-CLINTERFERENCEREQUEST.request
				6.3.61.2.1 Function
				6.3.61.2.2 Semantics of the service primitive
				6.3.61.2.3 When generated
				6.3.61.2.4 Effect of receipt
			6.3.61.3 MLME-CLINTERFERENCEREQUEST.indication
				6.3.61.3.1 Function
				6.3.61.3.2 Semantics of the service primitive
				6.3.61.3.3 When generated
				6.3.61.3.4 Effect of receipt
		6.3.62 Collocated Interference report
			6.3.62.1 General
			6.3.62.2 MLME-CLINTERFERENCEREPORT.request
				6.3.62.2.1 Function
				6.3.62.2.2 Semantics of the service primitive
				6.3.62.2.3 When generated
				6.3.62.2.4 Effect of receipt
			6.3.62.3 MLME-CLINTERFERENCEREPORT.indication
				6.3.62.3.1 Function
				6.3.62.3.2 Semantics of the service primitive
				6.3.62.3.3 When generated
		6.3.63 TFS setup
			6.3.63.1 General
			6.3.63.2 MLME-TFS.request
				6.3.63.2.1 Function
				6.3.63.2.2 Semantics of the service primitive
				6.3.63.2.3 When generated
				6.3.63.2.4 Effect of receipt
			6.3.63.3 MLME-TFS.confirm
				6.3.63.3.1 Function
				6.3.63.3.2 Semantics of the service primitive
				6.3.63.3.3 When generated
				6.3.63.3.4 Effect of receipt
			6.3.63.4 MLME-TFS.indication
				6.3.63.4.1 Function
				6.3.63.4.2 Semantics of the service primitive
				6.3.63.4.3 When generated
				6.3.63.4.4 Effect of receipt
			6.3.63.5 MLME-TFS.response
				6.3.63.5.1 Function
				6.3.63.5.2 Semantics of the service primitive
				6.3.63.5.3 When generated
				6.3.63.5.4 Effect of receipt
		6.3.64 WNM sleep mode request
			6.3.64.1 General
			6.3.64.2 MLME-SLEEPMODE.request
				6.3.64.2.1 Function
				6.3.64.2.2 Semantics of the service primitive
				6.3.64.2.3 When generated
				6.3.64.2.4 Effect of receipt
			6.3.64.3 MLME-SLEEPMODE.indication
				6.3.64.3.1 Function
				6.3.64.3.2 Semantics of the service primitive
				6.3.64.3.3 When generated
				6.3.64.3.4 Effect of receipt
			6.3.64.4 MLME-SLEEPMODE.response
				6.3.64.4.1 Function
				6.3.64.4.2 Semantics of the service primitive
				6.3.64.4.3 When generated
				6.3.64.4.4 Effect of receipt
			6.3.64.5 MLME-SLEEPMODE.confirm
				6.3.64.5.1 Function
				6.3.64.5.2 Semantics of the service primitive
				6.3.64.5.3 When generated
				6.3.64.5.4 Effect of receipt
		6.3.65 TIM broadcast setup
			6.3.65.1 General
			6.3.65.2 MLME-TIMBROADCAST.request
				6.3.65.2.1 Function
				6.3.65.2.2 Semantics of the service primitive
				6.3.65.2.3 When generated
				6.3.65.2.4 Effect of receipt
			6.3.65.3 MLME-TIMBROADCAST.confirm
				6.3.65.3.1 Function
				6.3.65.3.2 Semantics of the service primitive
				6.3.65.3.3 When generated
				6.3.65.3.4 Effect of receipt
			6.3.65.4 MLME-TIMBROADCAST.indication
				6.3.65.4.1 Function
				6.3.65.4.2 Semantics of the service primitive
				6.3.65.4.3 When generated
				6.3.65.4.4 Effect of receipt
			6.3.65.5 MLME-TIMBROADCAST.response
				6.3.65.5.1 Function
				6.3.65.5.2 Semantics of the service primitive
				6.3.65.5.3 When generated
				6.3.65.5.4 Effect of receipt
		6.3.66 QoS traffic capability update
			6.3.66.1 General
			6.3.66.2 MLME-QOSTRAFFICCAPUPDATE.request
				6.3.66.2.1 Function
				6.3.66.2.2 Semantics of the service primitive
				6.3.66.2.3 When generated
				6.3.66.2.4 Effect of receipt
			6.3.66.3 MLME-QOSTRAFFICCAPUPDATE.indication
				6.3.66.3.1 Function
				6.3.66.3.2 Semantics of the service primitive
				6.3.66.3.3 When generated
				6.3.66.3.4 Effect of receipt
		6.3.67 Channel Usage request
			6.3.67.1 General
			6.3.67.2 MLME-CHANNELUSAGE.request
				6.3.67.2.1 Function
				6.3.67.2.2 Semantics of the service primitive
				6.3.67.2.3 When generated
				6.3.67.2.4 Effect of receipt
			6.3.67.3 MLME-CHANNELUSAGE.confirm
				6.3.67.3.1 Function
				6.3.67.3.2 Semantics of the service primitive
				6.3.67.3.3 When generated
				6.3.67.3.4 Effect of receipt
			6.3.67.4 MLME-CHANNELUSAGE.indication
				6.3.67.4.1 Function
				6.3.67.4.2 Semantics of the service primitive
				6.3.67.4.3 When generated
				6.3.67.4.4 Effect of receipt
			6.3.67.5 MLME-CHANNELUSAGE.response
				6.3.67.5.1 Function
				6.3.67.5.2 Semantics of the service primitive
				6.3.67.5.3 When generated
				6.3.67.5.4 Effect of receipt
		6.3.68 DMS or GCR request and response procedure
			6.3.68.1 General
			6.3.68.2 MLME-GATS.request
				6.3.68.2.1 Function
				6.3.68.2.2 Semantics of the service primitive
				6.3.68.2.3 When generated
				6.3.68.2.4 Effect of receipt
			6.3.68.3 MLME-GATS.confirm
				6.3.68.3.1 Function
				6.3.68.3.2 Semantics of the service primitive
				6.3.68.3.3 When generated
				6.3.68.3.4 Effect of receipt
			6.3.68.4 MLME-GATS.indication
				6.3.68.4.1 Function
				6.3.68.4.2 Semantics of the service primitive
				6.3.68.4.3 When generated
				6.3.68.4.4 Effect of receipt
			6.3.68.5 MLME-GATS.response
				6.3.68.5.1 Function
				6.3.68.5.2 Semantics of the service primitive
				6.3.68.5.3 When generated
				6.3.68.5.4 Effect of receipt
			6.3.68.6 MLME-GATS-TERM.request
				6.3.68.6.1 Function
				6.3.68.6.2 Semantics of the service primitive
				6.3.68.6.3 When generated
				6.3.68.6.4 Effect of receipt
			6.3.68.7 MLME-GATS-TERM.indication
				6.3.68.7.1 Function
				6.3.68.7.2 Semantics of the service primitive
				6.3.68.7.3 When generated
				6.3.68.7.4 Effect of receipt
		6.3.69 Timing measurement request
			6.3.69.1 General
			6.3.69.2 MLME-TIMINGMSMTRQ.request
				6.3.69.2.1 Function
				6.3.69.2.2 Semantics of the service primitive
				6.3.69.2.3 When generated
				6.3.69.2.4 Effect of receipt
			6.3.69.3 MLME-TIMINGMSMTRQ.indication
				6.3.69.3.1 Function
				6.3.69.3.2 Semantics of the service primitive
				6.3.69.3.3 When generated
				6.3.69.3.4 Effect of receipt
		6.3.70 Fine timing measurement request
			6.3.70.1 General
			6.3.70.2 MLME-FINETIMINGMSMTRQ.request
				6.3.70.2.1 Function
				6.3.70.2.2 Semantics of the service primitive
				6.3.70.2.3 When generated
				6.3.70.2.4 Effect of receipt
			6.3.70.3 MLME-FINETIMINGMSMTRQ.indication
				6.3.70.3.1 Function
				6.3.70.3.2 Semantics of the service primitive
				6.3.70.3.3 When generated
				6.3.70.3.4 1 Effect of receipt
		6.3.71 WNM notification request
			6.3.71.1 General
			6.3.71.2 MLME-WNMNOTIFICATIONREQUEST.request
				6.3.71.2.1 Function
				6.3.71.2.2 Semantics of the service primitive
				6.3.71.2.3 When generated
				6.3.71.2.4 Effect of receipt
			6.3.71.3 MLME-WNMNOTIFICATIONREQUEST indication
				6.3.71.3.1 Function
				6.3.71.3.2 Semantics of the service primitive
				6.3.71.3.3 When generated
				6.3.71.3.4 Effect of receipt
		6.3.72 WNM notification response
			6.3.72.1 MLME-WNMNOTIFICATIONRESPONSE.request
				6.3.72.1.1 Function
				6.3.72.1.2 Semantics of the service primitive
				6.3.72.1.3 When generated
				6.3.72.1.4 Effect of receipt
			6.3.72.2 MLME-WNMNOTIFICATIONRESPONSE.indication
				6.3.72.2.1 Function
				6.3.72.2.2 Semantics of the service primitive
				6.3.72.2.3 When generated
				6.3.72.2.4 Effect of receipt
		6.3.73 Network discovery and selection support
			6.3.73.1 General
			6.3.73.2 MLME-GAS.request
				6.3.73.2.1 Function
				6.3.73.2.2 Semantics of the service primitive
				6.3.73.2.3 When generated
				6.3.73.2.4 Effect of receipt
			6.3.73.3 MLME-GAS.confirm
				6.3.73.3.1 Function
				6.3.73.3.2 Semantics of the service primitive
				6.3.73.3.3 When generated
				6.3.73.3.4 Effect of receipt
			6.3.73.4 MLME-GAS.indication
				6.3.73.4.1 Function
				6.3.73.4.2 Semantics of the service primitive
				6.3.73.4.3 When generated
				6.3.73.4.4 Effect of receipt
			6.3.73.5 MLME-GAS.response
				6.3.73.5.1 Function
				6.3.73.5.2 Semantics of the service primitive
				6.3.73.5.3 When generated
				6.3.73.5.4 Effect of receipt
		6.3.74 QoS Map element management
			6.3.74.1 General
			6.3.74.2 MLME-QOS-MAP.request
				6.3.74.2.1 Function
				6.3.74.2.2 Semantics of the service primitive
				6.3.74.2.3 When generated
				6.3.74.2.4 Effect of receipt
			6.3.74.3 MLME-QOS-MAP.indication
				6.3.74.3.1 Function
				6.3.74.3.2 Semantics of the service primitive
				6.3.74.3.3 When generated
				6.3.74.3.4 Effect of receipt
		6.3.75 Mesh peering management
			6.3.75.1 Introduction
			6.3.75.2 MLME-MESHPEERINGMANAGEMENT.request
				6.3.75.2.1 Function
				6.3.75.2.2 Semantics of the service primitive
				6.3.75.2.3 When generated
				6.3.75.2.4 Effect of receipt
			6.3.75.3 MLME-MESHPEERINGMANAGEMENT.confirm
				6.3.75.3.1 Function
				6.3.75.3.2 Semantics of the service primitive
				6.3.75.3.3 When generated
				6.3.75.3.4 Effect of receipt
			6.3.75.4 MLME-MESHPEERINGMANAGEMENT.indication
				6.3.75.4.1 Function
				6.3.75.4.2 Semantics of the service primitive
				6.3.75.4.3 When generated
				6.3.75.4.4 Effect of receipt
			6.3.75.5 MLME-MESHPEERINGMANAGEMENT.response
				6.3.75.5.1 Function
				6.3.75.5.2 Semantics of the service primitive
				6.3.75.5.3 When generated
				6.3.75.5.4 Effect of receipt
		6.3.76 Mesh power management
			6.3.76.1 Introduction
			6.3.76.2 MLME-MESHPOWERMGT.request
				6.3.76.2.1 Function
				6.3.76.2.2 Semantics of the service primitive
				6.3.76.2.3 When generated
				6.3.76.2.4 Effect of receipt
			6.3.76.3 MLME-MESHPOWERMGT.confirm
				6.3.76.3.1 Function
				6.3.76.3.2 Semantics of the service primitive
				6.3.76.3.3 When generated
				6.3.76.3.4 Effect of receipt
		6.3.77 Mesh neighbor offset synchronization
			6.3.77.1 Introduction
			6.3.77.2 MLME-MESHNEIGHBOROFFSETSYNCSTART.request
				6.3.77.2.1 Function
				6.3.77.2.2 Semantics of the service primitive
				6.3.77.2.3 When generated
				6.3.77.2.4 Effect of receipt
			6.3.77.3 MLME-MESHNEIGHBOROFFSETSYNCSTART.confirm
				6.3.77.3.1 Function
				6.3.77.3.2 Semantics of the service primitive
				6.3.77.3.3 When generated
				6.3.77.3.4 Effect of receipt
			6.3.77.4 MLME-MESHNEIGHBOROFFSETCALCULATE.request
				6.3.77.4.1 Function
				6.3.77.4.2 Semantics of the service primitive
				6.3.77.4.3 When generated
				6.3.77.4.4 Effect of receipt
			6.3.77.5 MLME-MESHNEIGHBOROFFSETCALCULATE.confirm
				6.3.77.5.1 Function
				6.3.77.5.2 Semantics of the service primitive
				6.3.77.5.3 When generated
				6.3.77.5.4 Effect of receipt
			6.3.77.6 MLME-MESHNEIGHBOROFFSETSYNCSTOP.request
				6.3.77.6.1 Function
				6.3.77.6.2 Semantics of the service primitive
				6.3.77.6.3 When generated
				6.3.77.6.4 Effect of receipt
			6.3.77.7 MLME-MESHNEIGHBOROFFSETSYNCSTOP.confirm
				6.3.77.7.1 Function
				6.3.77.7.2 Semantics of the service primitive
				6.3.77.7.3 When generated
				6.3.77.7.4 Effect of receipt
		6.3.78 Mesh TBTT adjustment
			6.3.78.1 Introduction
			6.3.78.2 MLME-MESHTBTTADJUSTMENT.request
				6.3.78.2.1 Function
				6.3.78.2.2 Semantics of the service primitive
				6.3.78.2.3 When generated
				6.3.78.2.4 Effect of receipt
			6.3.78.3 MLME-MESHTBTTADJUSTMENT.confirm
				6.3.78.3.1 Function
				6.3.78.3.2 Semantics of the service primitive
				6.3.78.3.3 When generated
				6.3.78.3.4 Effect of receipt
			6.3.78.4 MLME-MESHTBTTADJUSTMENT.indication
				6.3.78.4.1 Function
				6.3.78.4.2 Semantics of the service primitive
				6.3.78.4.3 When generated
				6.3.78.4.4 Effect of receipt
			6.3.78.5 MLME-MESHTBTTADJUSTMENT.response
				6.3.78.5.1 Function
				6.3.78.5.2 Semantics of the service primitive
				6.3.78.5.3 When generated
				6.3.78.5.4 Effect of receipt
		6.3.79 MCCA management interface
			6.3.79.1 Introduction
			6.3.79.2 MLME-ACTIVATEMCCA.request
				6.3.79.2.1 Function
				6.3.79.2.2 Semantics of the service primitive
				6.3.79.2.3 When generated
				6.3.79.2.4 Effect of receipt
			6.3.79.3 MLME-MCCASETUP.request
				6.3.79.3.1 Function
				6.3.79.3.2 Semantics of the service primitive
				6.3.79.3.3 When generated
				6.3.79.3.4 Effect of receipt
			6.3.79.4 MLME-MCCASETUP.confirm
				6.3.79.4.1 Function
				6.3.79.4.2 Semantics of the service primitive
				6.3.79.4.3 When generated
				6.3.79.4.4 Effect of receipt
			6.3.79.5 MLME-MCCASETUP.indication
				6.3.79.5.1 Function
				6.3.79.5.2 Semantics of the service primitive
				6.3.79.5.3 When generated
				6.3.79.5.4 Effect of receipt
			6.3.79.6 MLME-MCCASETUP.response
				6.3.79.6.1 Function
				6.3.79.6.2 Semantics of the service primitive
				6.3.79.6.3 When generated
				6.3.79.6.4 Effect of receipt
			6.3.79.7 MLME-MCCAADVERTISEMENT.request
				6.3.79.7.1 Function
				6.3.79.7.2 Semantics of the service primitive
				6.3.79.7.3 When generated
				6.3.79.7.4 Effect of receipt
			6.3.79.8 MLME-MCCAADVERTISEMENT.confirm
				6.3.79.8.1 Function
				6.3.79.8.2 Semantics of the service primitive
				6.3.79.8.3 When generated
				6.3.79.8.4 Effect of receipt
			6.3.79.9 MLME-MCCAADVERTISEMENT.indication
				6.3.79.9.1 Function
				6.3.79.9.2 Semantics of the service primitive
				6.3.79.9.3 When generated
				6.3.79.9.4 Effect of receipt
			6.3.79.10 MLME-MCCAADVERTISEMENT.response
				6.3.79.10.1 Function
				6.3.79.10.2 Semantics of the service primitive
				6.3.79.10.3 When generated
				6.3.79.10.4 Effect of receipt
			6.3.79.11 MLME-MCCATEARDOWN.request
				6.3.79.11.1 Function
				6.3.79.11.2 Semantics of the service primitive
				6.3.79.11.3 When generated
				6.3.79.11.4 Effect of receipt
			6.3.79.12 MLME-MCCATEARDOWN.indication
				6.3.79.12.1 Function
				6.3.79.12.2 Semantics of the service primitive
				6.3.79.12.3 When generated
				6.3.79.12.4 Effect of receipt
		6.3.80 MBSS congestion control
			6.3.80.1 Introduction
			6.3.80.2 MLME-MBSSCONGESTIONCONTROL.request
				6.3.80.2.1 Function
				6.3.80.2.2 Semantics of the service primitive
				6.3.80.2.3 When generated
				6.3.80.2.4 Effect of receipt
			6.3.80.3 MLME-MBSSCONGESTIONCONTROL.indication
				6.3.80.3.1 Function
				6.3.80.3.2 Semantics of the service primitive
				6.3.80.3.3 When generated
				6.3.80.3.4 Effect of receipt
		6.3.81 MBSS proxy update
			6.3.81.1 Introduction
			6.3.81.2 MLME-MBSSPROXYUPDATE.request
				6.3.81.2.1 Function
				6.3.81.2.2 Semantics of the service primitive
				6.3.81.2.3 When generated
				6.3.81.2.4 Effect of receipt
			6.3.81.3 MLME-MBSSPROXYUPDATE.confirm
				6.3.81.3.1 Function
				6.3.81.3.2 Semantics of the service primitive
				6.3.81.3.3 When generated
				6.3.81.3.4 Effect of receipt
			6.3.81.4 MLME-MBSSPROXYUPDATE.indication
				6.3.81.4.1 Function
				6.3.81.4.2 Semantics of the service primitive
				6.3.81.4.3 When generated
				6.3.81.4.4 Effect of receipt
			6.3.81.5 MLME-MBSSPROXYUPDATE.response
				6.3.81.5.1 Function
				6.3.81.5.2 Semantics of the service primitive
				6.3.81.5.3 When generated
				6.3.81.5.4 Effect of receipt
		6.3.82 MBSS mesh gate announcement
			6.3.82.1 Introduction
			6.3.82.2 MLME-MBSSGATEANNOUNCEMENT.request
				6.3.82.2.1 Function
				6.3.82.2.2 Semantics of the service primitive
				6.3.82.2.3 When generated
				6.3.82.2.4 Effect of receipt
			6.3.82.3 MLME-MBSSGATEANNOUNCEMENT.indication
				6.3.82.3.1 Function
				6.3.82.3.2 Semantics of the service primitive
				6.3.82.3.3 When generated
				6.3.82.3.4 Effect of receipt
		6.3.83 Mesh link metric
			6.3.83.1 Introduction
			6.3.83.2 MLME-MESHLINKMETRICREAD.request
				6.3.83.2.1 Function
				6.3.83.2.2 Semantics of the service primitive
				6.3.83.2.3 When generated
				6.3.83.2.4 Effect of receipt
			6.3.83.3 MLME-MESHLINKMETRICREAD.confirm
				6.3.83.3.1 Function
				6.3.83.3.2 Semantics of the service primitive
				6.3.83.3.3 When generated
				6.3.83.3.4 Effect of receipt
			6.3.83.4 MLME-MESHLINKMETRICREPORT.request
				6.3.83.4.1 Function
				6.3.83.4.2 Semantics of the service primitive
				6.3.83.4.3 When generated
				6.3.83.4.4 Effect of receipt
			6.3.83.5 MLME-MESHLINKMETRICREPORT.indication
				6.3.83.5.1 Function
				6.3.83.5.2 Semantics of the service primitive
				6.3.83.5.3 When generated
				6.3.83.5.4 Effect of receipt
		6.3.84 HWMP mesh path selection
			6.3.84.1 Introduction
			6.3.84.2 MLME-HWMPMESHPATHSELECTION.request
				6.3.84.2.1 Function
				6.3.84.2.2 Semantics of the service primitive
				6.3.84.2.3 When generated
				6.3.84.2.4 Effect of receipt
			6.3.84.3 MLME-HWMPMESHPATHSELECTION.indication
				6.3.84.3.1 Function
				6.3.84.3.2 Semantics of the service primitive
				6.3.84.3.3 When generated
				6.3.84.3.4 Effect of receipt
		6.3.85 QMF policy
			6.3.85.1 Introduction
			6.3.85.2 MLME-QMFPOLICY.request
				6.3.85.2.1 Function
				6.3.85.2.2 Semantics of the service primitive
				6.3.85.2.3 When generated
				6.3.85.2.4 Effect of receipt
			6.3.85.3 MLME-QMFPOLICY.indication
				6.3.85.3.1 Function
				6.3.85.3.2 Semantics of the service primitive
				6.3.85.3.3 When generated
				6.3.85.3.4 Effect of receipt
			6.3.85.4 MLME-QMFPOLICYCHANGE.request
				6.3.85.4.1 Function
				6.3.85.4.2 Semantics of the service primitive
				6.3.85.4.3 When generated
				6.3.85.4.4 Effect of receipt
			6.3.85.5 MLME-QMFPOLICYCHANGE.confirm
				6.3.85.5.1 Function
				6.3.85.5.2 Semantics of the service primitive
				6.3.85.5.3 When generated
				6.3.85.5.4 Effect of receipt
			6.3.85.6 MLME-QMFPOLICYCHANGE.indication
				6.3.85.6.1 Function
				6.3.85.6.2 Semantics of the service primitive
				6.3.85.6.3 When generated
				6.3.85.6.4 Effect of receipt
			6.3.85.7 MLME-QMFPOLICYCHANGE.response
				6.3.85.7.1 Function
				6.3.85.7.2 Semantics of the service primitive
				6.3.85.7.3 When generated
				6.3.85.7.4 Effect of receipt
			6.3.85.8 MLME-QMFPOLICYSET.request
				6.3.85.8.1 Function
				6.3.85.8.2 Semantics of the service primitive
				6.3.85.8.3 When generated
				6.3.85.8.4 Effect of receipt
		6.3.86 SCS request and response procedure
			6.3.86.1 General
			6.3.86.2 MLME-SCS.request
				6.3.86.2.1 Function
				6.3.86.2.2 Semantics of the service primitive
				6.3.86.2.3 When generated
				6.3.86.2.4 Effect of receipt
			6.3.86.3 MLME-SCS.confirm
				6.3.86.3.1 Function
				6.3.86.3.2 Semantics of the service primitive
				6.3.86.3.3 When generated
				6.3.86.3.4 Effect of receipt
			6.3.86.4 MLME-SCS.indication
				6.3.86.4.1 Function
				6.3.86.4.2 Semantics of the service primitive
				6.3.86.4.3 When generated
				6.3.86.4.4 Effect of receipt
			6.3.86.5 MLME-SCS.response
				6.3.86.5.1 Function
				6.3.86.5.2 Semantics of the service primitive
				6.3.86.5.3 When generated
				6.3.86.5.4 Effect of receipt
			6.3.86.6 MLME-SCS-TERM.request
				6.3.86.6.1 Function
				6.3.86.6.2 Semantics of the service primitive
				6.3.86.6.3 When generated
				6.3.86.6.4 Effect of receipt
			6.3.86.7 MLME-SCS-TERM.indication
				6.3.86.7.1 Function
				6.3.86.7.2 Semantics of the service primitive
				6.3.86.7.3 When generated
				6.3.86.7.4 Effect of receipt
		6.3.87 QLoad report management
			6.3.87.1 General
			6.3.87.2 MLME-QLOAD.request
				6.3.87.2.1 Function
				6.3.87.2.2 Semantics of the service primitive
				6.3.87.2.3 When generated
				6.3.87.2.4 Effect of receipt
			6.3.87.3 MLME-QLOAD.confirm
				6.3.87.3.1 Function
				6.3.87.3.2 Semantics of the service primitive
				6.3.87.3.3 When generated
				6.3.87.3.4 Effect of receipt
			6.3.87.4 MLME-QLOAD.indication
				6.3.87.4.1 Function
				6.3.87.4.2 Semantics of the service primitive
				6.3.87.4.3 When generated
				6.3.87.4.4 Effect of receipt
			6.3.87.5 MLME-QLOAD.response
				6.3.87.5.1 Function
				6.3.87.5.2 Semantics of the service primitive
				6.3.87.5.3 When generated
				6.3.87.5.4 Effect of receipt
		6.3.88 HCCA TXOP advertisement management
			6.3.88.1 General
			6.3.88.2 MLME-TXOPADVERTISEMENT.request
				6.3.88.2.1 Function
				6.3.88.2.2 Semantics of the service primitive
				6.3.88.2.3 When generated
				6.3.88.2.4 Effect of receipt
			6.3.88.3 MLME-TXOPADVERTISEMENT.confirm
				6.3.88.3.1 Function
				6.3.88.3.2 Semantics of the service primitive
				6.3.88.3.3 When generated
				6.3.88.3.4 Effect of receipt
			6.3.88.4 MLME-TXOPADVERTISEMENT.indication
				6.3.88.4.1 Function
				6.3.88.4.2 Semantics of the service primitive
				6.3.88.4.3 When generated
				6.3.88.4.4 Effect of receipt
			6.3.88.5 MLME-TXOPADVERTISEMENT.response
				6.3.88.5.1 Function
				6.3.88.5.2 Semantics of the service primitive
				6.3.88.5.3 When generated
				6.3.88.5.4 Effect of receipt
		6.3.89 GCR group membership management
			6.3.89.1 General
			6.3.89.2 MLME-GROUP-MEMBERSHIP.request
				6.3.89.2.1 Function
				6.3.89.2.2 Semantics of the service primitive
				6.3.89.2.3 When generated
				6.3.89.2.4 Effect of receipt
			6.3.89.3 MLME-GROUP-MEMBERSHIP.confirm
				6.3.89.3.1 Function
				6.3.89.3.2 Semantics of the service primitive
				6.3.89.3.3 When generated
				6.3.89.3.4 Effect of receipt
			6.3.89.4 MLME-GROUP-MEMBERSHIP.indication
				6.3.89.4.1 Function
				6.3.89.4.2 Semantics of the service primitive
				6.3.89.4.3 When generated
				6.3.89.4.4 Effect of receipt
			6.3.89.5 MLME-GROUP-MEMBERSHIP.response
				6.3.89.5.1 Function
				6.3.89.5.2 Semantics of the service primitive
				6.3.89.5.3 When generated
				6.3.89.5.4 Effect of receipt
		6.3.90 AP PeerKey management
			6.3.90.1 General
			6.3.90.2 MLME-APPEERKEY.request
				6.3.90.2.1 Function
				6.3.90.2.2 Semantics of the service primitive
				6.3.90.2.3 When generated
				6.3.90.2.4 Effect of receipt
			6.3.90.3 MLME-APPEERKEY.indication
				6.3.90.3.1 Function
				6.3.90.3.2 Semantics of the service primitive
				6.3.90.3.3 When generated
				6.3.90.3.4 Effect of receipt
		6.3.91 On-channel Tunneling operation
			6.3.91.1 General
			6.3.91.2 MLME-OCTunnel.request
				6.3.91.2.1 Function
				6.3.91.2.2 Semantics of the service primitive
				6.3.91.2.3 When generated
				6.3.91.2.4 Effect on receipt
			6.3.91.3 MLME-OCTunnel.indication
				6.3.91.3.1 Function
				6.3.91.3.2 Semantics of the service primitive
				6.3.91.3.3 When generated
				6.3.91.3.4 Effect on receipt
		6.3.92 Multi-band operation
			6.3.92.1 General
			6.3.92.2 MLME-FST-SETUP.request
				6.3.92.2.1 Function
				6.3.92.2.2 Semantics of the service primitive
				6.3.92.2.3 When generated
				6.3.92.2.4 Effect on receipt
			6.3.92.3 MLME-FST-SETUP.indication
				6.3.92.3.1 Function
				6.3.92.3.2 Semantics of the service primitive
				6.3.92.3.3 When generated
				6.3.92.3.4 Effect on receipt
			6.3.92.4 MLME-FST-SETUP.response
				6.3.92.4.1 Function
				6.3.92.4.2 Semantics of the service primitive
				6.3.92.4.3 When generated
				6.3.92.4.4 Effect on receipt
			6.3.92.5 MLME-FST-SETUP.confirm
				6.3.92.5.1 Function
				6.3.92.5.2 Semantics of the service primitive
				6.3.92.5.3 When generated
				6.3.92.5.4 Effect on receipt
			6.3.92.6 MLME-FST-ACK.request
				6.3.92.6.1 Function
				6.3.92.6.2 Semantics of the service primitive
				6.3.92.6.3 When generated
				6.3.92.6.4 Effect on receipt
			6.3.92.7 MLME-FST-ACK.indication
				6.3.92.7.1 Function
				6.3.92.7.2 Semantics of the service primitive
				6.3.92.7.3 When generated
				6.3.92.7.4 Effect on receipt
			6.3.92.8 MLME-FST-ACK.response
				6.3.92.8.1 Function
				6.3.92.8.2 Semantics of the service primitive
				6.3.92.8.3 When generated
				6.3.92.8.4 Effect on receipt
			6.3.92.9 MLME-FST-ACK.confirm
				6.3.92.9.1 Function
				6.3.92.9.2 Semantics of the service primitive
				6.3.92.9.3 When generated
				6.3.92.9.4 Effect on receipt
			6.3.92.10 MLME-FST-TEARDOWN.request
				6.3.92.10.1 Function
				6.3.92.10.2 Semantics of the service primitive
				6.3.92.10.3 When generated
				6.3.92.10.4 Effect on receipt
			6.3.92.11 MLME-FST-TEARDOWN.indication
				6.3.92.11.1 Function
				6.3.92.11.2 Semantics of the service primitive
				6.3.92.11.3 When generated
				6.3.92.11.4 Effect on receipt
			6.3.92.12 MLME-FST-INCOMING.request
				6.3.92.12.1 Function
				6.3.92.12.2 Semantics of the service primitive
				6.3.92.12.3 When generated
				6.3.92.12.4 Effect on receipt
		6.3.93 DMG relay operation
			6.3.93.1 General
			6.3.93.2 MLME-RELAY-SEARCH.request
				6.3.93.2.1 Function
				6.3.93.2.2 Semantics of the service primitive
				6.3.93.2.3 When generated
				6.3.93.2.4 Effect on receipt
			6.3.93.3 MLME-RELAY-SEARCH.confirm
				6.3.93.3.1 Function
				6.3.93.3.2 Semantics of the service primitive
				6.3.93.3.3 When generated
				6.3.93.3.4 Effect on receipt
			6.3.93.4 MLME-RELAY-SEARCH.indication
				6.3.93.4.1 Function
				6.3.93.4.2 Semantics of the service primitive
				6.3.93.4.3 When generated
				6.3.93.4.4 Effect on receipt
			6.3.93.5 MLME-RELAY-SEARCH.response
				6.3.93.5.1 Function
				6.3.93.5.2 Semantics of the service primitive
				6.3.93.5.3 When generated
				6.3.93.5.4 Effect on receipt
			6.3.93.6 MLME-RLS.request
				6.3.93.6.1 Function
				6.3.93.6.2 Semantics of the service primitive
				6.3.93.6.3 When generated
				6.3.93.6.4 Effect on receipt
			6.3.93.7 MLME-RLS.confirm
				6.3.93.7.1 Function
				6.3.93.7.2 Semantics of the service primitive
				6.3.93.7.3 When generated
				6.3.93.7.4 Effect on receipt
			6.3.93.8 MLME-RLS.indication
				6.3.93.8.1 Function
				6.3.93.8.2 Semantics of the service primitive
				6.3.93.8.3 When generated
				6.3.93.8.4 Effect on receipt
			6.3.93.9 MLME-RLS.response
				6.3.93.9.1 Function
				6.3.93.9.2 Semantics of the service primitive
				6.3.93.9.3 When generated
				6.3.93.9.4 Effect on receipt
			6.3.93.10 MLME-RLS-TEARDOWN.request
				6.3.93.10.1 Function
				6.3.93.10.2 Semantics of the service primitive
				6.3.93.10.3 When generated
				6.3.93.10.4 Effect on receipt
			6.3.93.11 MLME-RLS-TEARDOWN.indication
				6.3.93.11.1 Function
				6.3.93.11.2 Semantics of the service primitive
				6.3.93.11.3 When generated
				6.3.93.11.4 Effect on receipt
		6.3.94 Quieting adjacent BSS operation
			6.3.94.1 General
			6.3.94.2 MLME-QAB.request
				6.3.94.2.1 Function
				6.3.94.2.2 Semantics of the service primitive
				6.3.94.2.3 When generated
				6.3.94.2.4 Effect on receipt
			6.3.94.3 MLME-QAB.confirm
				6.3.94.3.1 Function
				6.3.94.3.2 Semantics of the service primitive
				6.3.94.3.3 When generated
				6.3.94.3.4 Effect on receipt
			6.3.94.4 MLME-QAB.indication
				6.3.94.4.1 Function
				6.3.94.4.2 Semantics of the service primitive
				6.3.94.4.3 When generated
				6.3.94.4.4 Effect on receipt
			6.3.94.5 MLME-QAB.response
				6.3.94.5.1 Function
				6.3.94.5.2 Semantics of the service primitive
				6.3.94.5.3 When generated
				6.3.94.5.4 Effect on receipt
		6.3.95 DMG beamforming
			6.3.95.1 General
			6.3.95.2 MLME-BF-TRAINING.request
				6.3.95.2.1 Function
				6.3.95.2.2 Semantics of the service primitive
				6.3.95.2.3 When generated
				6.3.95.2.4 Effect on receipt
			6.3.95.3 MLME-BF-TRAINING.confirm
				6.3.95.3.1 Function
				6.3.95.3.2 Semantics of the service primitive
				6.3.95.3.3 When generated
				6.3.95.3.4 Effect on receipt
			6.3.95.4 MLME-BF-TRAINING.indication
				6.3.95.4.1 Function
				6.3.95.4.2 Semantics of the service primitive
				6.3.95.4.3 When generated
				6.3.95.4.4 Effect on receipt
		6.3.96 PN event report
			6.3.96.1 General
			6.3.96.2 MLME-PN-EXHAUSTION.indication
				6.3.96.2.1 Function
				6.3.96.2.2 Semantics of the service primitive
				6.3.96.2.3 When generated
				6.3.96.2.4 Effect of receipt
			6.3.96.3 MLME-PN-WARNING.indication
				6.3.96.3.1 Function
				6.3.96.3.2 Semantics of the service primitive
				6.3.96.3.3 When generated
				6.3.96.3.4 Effect of receipt
		6.3.97 Channel Availability Query
			6.3.97.1 Introduction
			6.3.97.2 MLME-CHANNELAVAILABILITYQUERY.request
				6.3.97.2.1 Function
				6.3.97.2.2 Semantics of the service primitive
				6.3.97.2.3 When generated
				6.3.97.2.4 Effect of receipt
			6.3.97.3 MLME-CHANNELAVAILABILITYQUERY.confirm
				6.3.97.3.1 Function
				6.3.97.3.2 Semantics of the service primitive
				6.3.97.3.3 When generated
				6.3.97.3.4 Effect of receipt
			6.3.97.4 MLME-CHANNELAVAILABILITYQUERY.indication
				6.3.97.4.1 Function
				6.3.97.4.2 Semantics of the service primitive
				6.3.97.4.3 When generated
				6.3.97.4.4 Effect of receipt
			6.3.97.5 MLME-CHANNELAVAILABILITYQUERY.response
				6.3.97.5.1 Function
				6.3.97.5.2 Semantics of the service primitive
				6.3.97.5.3 When generated
				6.3.97.5.4 Effect of receipt
		6.3.98 Channel schedule management
			6.3.98.1 Introduction
			6.3.98.2 MLME-CHANNELSCHEDULEMANAGEMENT.request
				6.3.98.2.1 Function
				6.3.98.2.2 Semantics of the service primitive
				6.3.98.2.3 When generated
				6.3.98.2.4 Effect of receipt
			6.3.98.3 MLME-CHANNELSCHEDULEMANAGEMENT.confirm
				6.3.98.3.1 Function
				6.3.98.3.2 Semantics of the service primitive
				6.3.98.3.3 When generated
				6.3.98.3.4 Effect of receipt
			6.3.98.4 MLME-CHANNELSCHEDULEMANAGEMENT.indication
				6.3.98.4.1 Function
				6.3.98.4.2 Semantics of the service primitive
				6.3.98.4.3 When generated
				6.3.98.4.4 Effect of receipt
			6.3.98.5 MLME-CHANNELSCHEDULEMANAGEMENT.response
				6.3.98.5.1 Function
				6.3.98.5.2 Semantics of the service primitive
				6.3.98.5.3 When generated
				6.3.98.5.4 Effect of receipt
		6.3.99 Contact verification signal
			6.3.99.1 Introduction
			6.3.99.2 MLME-CVS.request
				6.3.99.2.1 Function
				6.3.99.2.2 Semantics of the service primitive
				6.3.99.2.3 When generated
				6.3.99.2.4 Effect of receipt
			6.3.99.3 MLME-CVS.indication
				6.3.99.3.1 Function
				6.3.99.3.2 Semantics of the service primitive
				6.3.99.3.3 When generated
				6.3.99.3.4 Effect of receipt
		6.3.100 GDD Enablement
			6.3.100.1 Introduction
			6.3.100.2 MLME-GDDENABLEMENT.request
				6.3.100.2.1 Function
				6.3.100.2.2 Semantics of the service primitive
				6.3.100.2.3 When generated
				6.3.100.2.4 Effect of receipt
			6.3.100.3 MLME-GDDENABLEMENT.confirm
				6.3.100.3.1 Function
				6.3.100.3.2 Semantics of the service primitive
				6.3.100.3.3 When generated
				6.3.100.3.4 Effect of receipt
			6.3.100.4 MLME-GDDENABLEMENT.indication
				6.3.100.4.1 Function
				6.3.100.4.2 Semantics of the service primitive
				6.3.100.4.3 When generated
				6.3.100.4.4 Effect of receipt
			6.3.100.5 MLME-GDDENABLEMENT.response
				6.3.100.5.1 Function
				6.3.100.5.2 Semantics of the service primitive
				6.3.100.5.3 When generated
				6.3.100.5.4 Effect of receipt
		6.3.101 Network channel control management
			6.3.101.1 Introduction
			6.3.101.2 MLME-NETWORKCHANNELCONTROL.request
				6.3.101.2.1 Function
				6.3.101.2.2 Semantics of the service primitive
				6.3.101.2.3 When generated
				6.3.101.2.4 Effect of receipt
			6.3.101.3 MLME-NETWORKCHANNELCONTROL.confirm
				6.3.101.3.1 Function
				6.3.101.3.2 Semantics of the service primitive
				6.3.101.3.3 When generated
				6.3.101.3.4 Effect of receipt
			6.3.101.4 MLME-NETWORKCHANNELCONTROL.indication
				6.3.101.4.1 Function
				6.3.101.4.2 Semantics of the service primitive
				6.3.101.4.3 When generated
				6.3.101.4.4 Effect of receipt
			6.3.101.5 MLME-NETWORKCHANNELCONTROL.response
				6.3.101.5.1 Function
				6.3.101.5.2 Semantics of the service primitive
				6.3.101.5.3 When generated
				6.3.101.5.4 Effect of receipt
		6.3.102 White space map (WSM)
			6.3.102.1 Introduction
			6.3.102.2 MLME-WSM.request
				6.3.102.2.1 Function
				6.3.102.2.2 Semantics of the service primitive
				6.3.102.2.3 When generated
				6.3.102.2.4 Effect of receipt
			6.3.102.3 MLME-WSM.indication
				6.3.102.3.1 Function
				6.3.102.3.2 Semantics of the service primitive
				6.3.102.3.3 When generated
				6.3.102.3.4 Effect of receipt
		6.3.103 Estimated Throughput (ESTT)
			6.3.103.1 General
			6.3.103.2 MLME-ESTIMATED-THROUGHPUT.request
				6.3.103.2.1 Function
				6.3.103.2.2 Semantics of the service primitive
				6.3.103.2.3 When generated
				6.3.103.2.4 Effect of receipt
			6.3.103.3 MLME-ESTIMATED-THROUGHPUT.confirm
				6.3.103.3.1 Function
				6.3.103.3.2 Semantics of the service primitive
				6.3.103.3.3 When generated
				6.3.103.3.4 Effect of receipt
		6.3.104 Get authentication/association state
			6.3.104.1 General
			6.3.104.2 MLME-GETAUTHASSOCSTATE.request
				6.3.104.2.1 Function
				6.3.104.2.2 Semantics of the service primitive
				6.3.104.2.3 When generated
				6.3.104.2.4 Effect of receipt
			6.3.104.3 MLME-GETAUTHASSOCSTATE.confirm
				6.3.104.3.1 Function
				6.3.104.3.2 Semantics of the service primitive
				6.3.104.3.3 When generated
				6.3.104.3.4 Effect of receipt
	6.4 MAC state generic convergence function (MSGCF)
		6.4.1 Overview of the convergence function
		6.4.2 Overview of convergence function state machine
		6.4.3 Convergence function state list
			6.4.3.1 ESS_CONNECTED
			6.4.3.2 ESS_DISCONNECTED
			6.4.3.3 ESS_DISENGAGING
			6.4.3.4 STANDBY
		6.4.4 Convergence function state transitions
			6.4.4.1 Transitions to ESS_CONNECTED
				6.4.4.1.1 From ESS_DISCONNECTED
				6.4.4.1.2 From ESS_DISENGAGING
			6.4.4.2 Transitions to ESS_ DISCONNECTED
				6.4.4.2.1 From ESS_CONNECTED
				6.4.4.2.2 From ESS_DISENGAGING
				6.4.4.2.3 From STANDBY
			6.4.4.3 Transitions to ESS_DISENGAGING
				6.4.4.3.1 From ESS_CONNECTED
			6.4.4.4 Transitions to STANDBY
				6.4.4.4.1 From ESS_DISCONNECTED
		6.4.5 Convergence function informational events
		6.4.6 MAC state generic convergence SAP
		6.4.7 ESS status reporting
			6.4.7.1 MSGCF-ESS-LINK-UP.indication
				6.4.7.1.1 Function
				6.4.7.1.2 Semantics of the service primitive
				6.4.7.1.3 When generated
				6.4.7.1.4 Effect of receipt
			6.4.7.2 MSGCF-ESS-LINK-DOWN.indication
				6.4.7.2.1 Function
				6.4.7.2.2 Semantics of the service primitive
				6.4.7.2.3 When generated
				6.4.7.2.4 Effect of receipt
			6.4.7.3 MSGCF-ESS-LINK-GOING-DOWN.indication
				6.4.7.3.1 Function
				6.4.7.3.2 Semantics of the service primitive
				6.4.7.3.3 When generated
				6.4.7.3.4 Effect of receipt
			6.4.7.4 MSGCF-ESS-LINK-EVENT-ROLLBACK.indication
				6.4.7.4.1 Function
				6.4.7.4.2 Semantics of the service primitive
				6.4.7.4.3 When generated
				6.4.7.4.4 Effect of receipt
			6.4.7.5 MSGCF-ESS-LINK-DETECTED.indication
				6.4.7.5.1 Function
				6.4.7.5.2 Semantics of the service primitive
				6.4.7.5.3 When generated
				6.4.7.5.4 Effect of receipt
			6.4.7.6 MSGCF-ESS-LINK-SCAN.request
				6.4.7.6.1 Function
				6.4.7.6.2 Semantics of the service primitive
				6.4.7.6.3 When generated
				6.4.7.6.4 Effect of receipt
			6.4.7.7 MSGCF-ESS-LINK-SCAN.confirm
				6.4.7.7.1 Function
				6.4.7.7.2 Semantics of the service primitive
				6.4.7.7.3 When generated
				6.4.7.7.4 Effect of receipt
		6.4.8 Network configuration
			6.4.8.1 MSGCF-ESS-LINK-CAPABILITY.request
				6.4.8.1.1 Function
				6.4.8.1.2 Semantics of the service primitive
				6.4.8.1.3 When generated
				6.4.8.1.4 Effect of receipt
			6.4.8.2 MSGCF-ESS-LINK-CAPABILITY.confirm
				6.4.8.2.1 Function
				6.4.8.2.2 Semantics of the service primitive
				6.4.8.2.3 When generated
				6.4.8.2.4 Effect of receipt
			6.4.8.3 MSGCF-ESS-LINK-PARAMETERS.request
				6.4.8.3.1 Function
				6.4.8.3.2 Semantics of the service primitive
				6.4.8.3.3 When generated
				6.4.8.3.4 Effect of receipt
			6.4.8.4 MSGCF-ESS-LINK-PARAMETERS.confirm
				6.4.8.4.1 Function
				6.4.8.4.2 Semantics of the service primitive
				6.4.8.4.3 When generated
				6.4.8.4.4 Effect of receipt
			6.4.8.5 MSGCF-GET-ESS-LINK-PARAMETERS.request
				6.4.8.5.1 Function
				6.4.8.5.2 Semantics of the service primitive
				6.4.8.5.3 When generated
				6.4.8.5.4 Effect of receipt
			6.4.8.6 MSGCF-GET-ESS-LINK-PARAMETERS.confirm
				6.4.8.6.1 Function
				6.4.8.6.2 Semantics of the service primitive
				6.4.8.6.3 When generated
				6.4.8.6.4 Effect of receipt
		6.4.9 Network events
			6.4.9.1 MSGCF-ESS-LINK-THRESHOLD-REPORT.indication
				6.4.9.1.1 Function
				6.4.9.1.2 Semantics of the service primitive
				6.4.9.1.3 When generated
				6.4.9.1.4 Effect of receipt
		6.4.10 Network command interface
			6.4.10.1 MSGCF-ESS-LINK-COMMAND.request
				6.4.10.1.1 Function
				6.4.10.1.2 Semantics of the service primitive
				6.4.10.1.3 When generated
				6.4.10.1.4 Effect of receipt
		6.4.11 MAC state SME SAP—mobility management
			6.4.11.1 MSSME-ESS-LINK-GOING-DOWN.indication
				6.4.11.1.1 Function
				6.4.11.1.2 Semantics of the service primitive
				6.4.11.1.3 When generated
				6.4.11.1.4 Effect of receipt
	6.5 PLME SAP interface
		6.5.1 General
		6.5.2 PLME-RESET.request
			6.5.2.1 Function
			6.5.2.2 Semantics of the service primitive
			6.5.2.3 When generated
			6.5.2.4 Effect of receipt
		6.5.3 PLME-CHARACTERISTICS.request
			6.5.3.1 Function
			6.5.3.2 Semantics of the service primitive
			6.5.3.3 When generated
			6.5.3.4 Effect of receipt
		6.5.4 PLME-CHARACTERISTICS.confirm
			6.5.4.1 Function
			6.5.4.2 Semantics of the service primitive
			6.5.4.3 When generated
			6.5.4.4 Effect of receipt
		6.5.5 PLME-TXTIME.request
			6.5.5.1 Function
			6.5.5.2 Semantics of the service primitive
			6.5.5.3 When generated
			6.5.5.4 Effect of receipt
		6.5.6 PLME-TXTIME.confirm
			6.5.6.1 Function
			6.5.6.2 Semantics of the service primitive
			6.5.6.3 When generated
			6.5.6.4 Effect of receipt
7. DS SAP specification
	7.1 Introduction
	7.2 SAP primitives
		7.2.1 General
		7.2.2 MSDU transfer
			7.2.2.1 General
			7.2.2.2 DS-UNITDATA.request
				7.2.2.2.1 Function
				7.2.2.2.2 Semantics of the service primitive
				7.2.2.2.3 When generated
				7.2.2.2.4 Effect of receipt
			7.2.2.3 DS-UNITDATA.indication
				7.2.2.3.1 Function
				7.2.2.3.2 Semantics of the service primitive
				7.2.2.3.3 When generated
				7.2.2.3.4 Effect of receipt
		7.2.3 Mapping updates
			7.2.3.1 General
			7.2.3.2 DS-STA-NOTIFY.request
				7.2.3.2.1 Function
				7.2.3.2.2 Semantics of the service primitive
				7.2.3.2.3 When generated
				7.2.3.2.4 Effect of receipt
8. PHY service specification
	8.1 Scope
	8.2 PHY functions
	8.3 Detailed PHY service specifications
		8.3.1 Scope and field of application
		8.3.2 Overview of the service
		8.3.3 Overview of interactions
		8.3.4 Basic service and options
			8.3.4.1 PHY SAP peer-to-peer service primitives
			8.3.4.2 PHY SAP inter-(sub)layer service primitives
			8.3.4.3 PHY SAP service primitives parameters
			8.3.4.4 Vector descriptions
		8.3.5 PHY SAP detailed service specification
			8.3.5.1 Introduction
			8.3.5.2 PHY-DATA.request
				8.3.5.2.1 Function
				8.3.5.2.2 Semantics of the service primitive
				8.3.5.2.3 When generated
				8.3.5.2.4 Effect of receipt
			8.3.5.3 PHY-DATA.indication
				8.3.5.3.1 Function
				8.3.5.3.2 Semantics of the service primitive
				8.3.5.3.3 When generated
				8.3.5.3.4 Effect of receipt
			8.3.5.4 PHY-DATA.confirm
				8.3.5.4.1 Function
				8.3.5.4.2 Semantics of the service primitive
				8.3.5.4.3 When generated
				8.3.5.4.4 Effect of receipt
			8.3.5.5 PHY-TXSTART.request
				8.3.5.5.1 Function
				8.3.5.5.2 Semantics of the service primitive
				8.3.5.5.3 When generated
				8.3.5.5.4 Effect of receipt
			8.3.5.6 PHY-TXSTART.confirm
				8.3.5.6.1 Function
				8.3.5.6.2 Semantics of the service primitive
				8.3.5.6.3 When generated
				8.3.5.6.4 Effect of receipt
			8.3.5.7 PHY-TXEND.request
				8.3.5.7.1 Function
				8.3.5.7.2 Semantics of the service primitive
				8.3.5.7.3 When generated
				8.3.5.7.4 Effect of receipt
			8.3.5.8 PHY-TXEND.confirm
				8.3.5.8.1 Function
				8.3.5.8.2 Semantics of the service primitive
				8.3.5.8.3 When generated
				8.3.5.8.4 Effect of receipt
			8.3.5.9 PHY-TXHEADEREND.indication
				8.3.5.9.1 Function
				8.3.5.9.2 Semantics of the service primitive
				8.3.5.9.3 When generated
				8.3.5.9.4 Effect of receipt
			8.3.5.10 PHY-CCARESET.request
				8.3.5.10.1 Function
				8.3.5.10.2 Semantics of the service primitive
				8.3.5.10.3 When generated
				8.3.5.10.4 Effect of receipt
			8.3.5.11 PHY-CCARESET.confirm
				8.3.5.11.1 Function
				8.3.5.11.2 Semantics of the service primitive
				8.3.5.11.3 When generated
				8.3.5.11.4 Effect of receipt
			8.3.5.12 PHY-CCA.indication
				8.3.5.12.1 Function
				8.3.5.12.2 Semantics of the service primitive
				8.3.5.12.3 When generated
				8.3.5.12.4 Effect of receipt
			8.3.5.13 PHY-RXSTART.indication
				8.3.5.13.1 Function
				8.3.5.13.2 Semantics of the service primitive
				8.3.5.13.3 When generated
				8.3.5.13.4 Effect of receipt
			8.3.5.14 PHY-RXEND.indication
				8.3.5.14.1 Function
				8.3.5.14.2 Semantics of the service primitive
				8.3.5.14.3 When generated
				8.3.5.14.4 Effect of receipt
			8.3.5.15 PHY-CONFIG.request
				8.3.5.15.1 Function
				8.3.5.15.2 Semantics of the service primitive
				8.3.5.15.3 When generated
				8.3.5.15.4 Effect of receipt
			8.3.5.16 PHY-CONFIG.confirm
				8.3.5.16.1 Function
				8.3.5.16.2 Semantics of the service primitive
				8.3.5.16.3 When generated
				8.3.5.16.4 Effect of receipt
			8.3.5.17 PHY-TXBUSY.indication
				8.3.5.17.1 Function
				8.3.5.17.2 Semantics of the service primitive
				8.3.5.17.3 When generated
				8.3.5.17.4 Effect of receipt
	8.4 PHY management
9. Frame formats
	9.1 General requirements
	9.2 MAC frame formats
		9.2.1 Basic components
		9.2.2 Conventions
		9.2.3 General frame format
		9.2.4 Frame fields
			9.2.4.1 Frame Control field
				9.2.4.1.1 General
				9.2.4.1.2 Protocol Version subfield
				9.2.4.1.3 Type and Subtype subfields
				9.2.4.1.4 To DS and From DS subfields
				9.2.4.1.5 More Fragments subfield
				9.2.4.1.6 Retry subfield
				9.2.4.1.7 Power Management subfield
				9.2.4.1.8 More Data subfield
				9.2.4.1.9 Protected Frame subfield
				9.2.4.1.10 +HTC/Order subfield
			9.2.4.2 Duration/ID field
			9.2.4.3 Address fields
				9.2.4.3.1 General
				9.2.4.3.2 Address representation
				9.2.4.3.3 Address designation
				9.2.4.3.4 BSSID field
				9.2.4.3.5 DA field
				9.2.4.3.6 SA field
				9.2.4.3.7 RA field
				9.2.4.3.8 TA field
			9.2.4.4 Sequence Control field
				9.2.4.4.1 Sequence Control field structure
				9.2.4.4.2 Sequence Number field
				9.2.4.4.3 Fragment Number field
			9.2.4.5 QoS Control field
				9.2.4.5.1 QoS Control field structure
				9.2.4.5.2 TID subfield
				9.2.4.5.3 EOSP (end of service period) subfield
				9.2.4.5.4 Ack Policy subfield
				9.2.4.5.5 TXOP Limit subfield
				9.2.4.5.6 Queue Size subfield
				9.2.4.5.7 TXOP Duration Requested subfield
				9.2.4.5.8 AP PS Buffer State subfield
				9.2.4.5.9 A-MSDU Present subfield
				9.2.4.5.10 Mesh Control Present subfield
				9.2.4.5.11 Mesh Power Save Level subfield
				9.2.4.5.12 Receiver Service Period Initiated (RSPI) subfield
				9.2.4.5.13 A-MSDU Type subfield
				9.2.4.5.14 RDG/More PPDU subfield
				9.2.4.5.15 AC Constraint subfield
				9.2.4.5.16 Buffered AC subfield
			9.2.4.6 HT Control field
				9.2.4.6.1 General
				9.2.4.6.2 HT variant
				9.2.4.6.3 VHT variant
			9.2.4.7 Frame Body field
				9.2.4.7.1 General
				9.2.4.7.2 Overhead for encryption
				9.2.4.7.3 Mesh Control field
			9.2.4.8 FCS field
		9.2.5 Duration/ID field (QoS STA)
			9.2.5.1 General
			9.2.5.2 Setting for single and multiple protection under enhanced distributed channel access (EDCA)
			9.2.5.3 Setting for QoS CF-Poll frames
			9.2.5.4 Setting for frames sent by a TXOP holder under HCCA
			9.2.5.5 Settings within a PSMP sequence
			9.2.5.6 Settings within a dual CTS sequence
			9.2.5.7 Setting for control response frames
			9.2.5.8 Setting for other response frames
	9.3 Format of individual frame types
		9.3.1 Control frames
			9.3.1.1 Format of Control frames
			9.3.1.2 RTS frame format
			9.3.1.3 CTS frame format
			9.3.1.4 Ack frame format
			9.3.1.5 PS-Poll frame format
			9.3.1.6 CF-End frame format
			9.3.1.7 CF-End +CF-Ack frame format
			9.3.1.8 BlockAckReq frame format
				9.3.1.8.1 Overview
				9.3.1.8.2 Basic BlockAckReq variant
				9.3.1.8.3 Compressed BlockAckReq variant
				9.3.1.8.4 Extended Compressed BlockAckReq variant
				9.3.1.8.5 Multi-TID BlockAckReq variant
				9.3.1.8.6 GCR BlockAckReq variant
			9.3.1.9 BlockAck frame format
				9.3.1.9.1 Overview
				9.3.1.9.2 Basic BlockAck variant
				9.3.1.9.3 Compressed BlockAck variant
				9.3.1.9.4 Multi-TID BlockAck variant
				9.3.1.9.5 Extended Compressed BlockAck variant
				9.3.1.9.6 GCR Block Ack variant
			9.3.1.10 Control Wrapper frame
			9.3.1.11 Poll frame format
			9.3.1.12 Service period request (SPR) frame format
			9.3.1.13 Grant frame format
			9.3.1.14 DMG CTS frame format
			9.3.1.15 DMG DTS frame format
			9.3.1.16 Sector sweep (SSW) frame format
			9.3.1.17 Sector sweep feedback (SSW-Feedback) frame format
			9.3.1.18 Sector sweep Ack (SSW-Ack) frame format
			9.3.1.19 Grant Ack frame format
			9.3.1.20 VHT NDP Announcement frame format
			9.3.1.21 Beamforming Report Poll frame format
		9.3.2 Data frames
			9.3.2.1 Format of Data frames
			9.3.2.2 Aggregate MSDU (A-MSDU) format
				9.3.2.2.1 General
				9.3.2.2.2 Basic A-MSDU subframe format
				9.3.2.2.3 Short A-MSDU subframe format
		9.3.3 Management frames
			9.3.3.1 Terminology of Management frames and MMPDUs
			9.3.3.2 Format of Management frames
			9.3.3.3 Beacon frame format
			9.3.3.4 ATIM frame format
			9.3.3.5 Disassociation frame format
			9.3.3.6 Association Request frame format
			9.3.3.7 Association Response frame format
			9.3.3.8 Reassociation Request frame format
			9.3.3.9 Reassociation Response frame format
			9.3.3.10 Probe Request frame format
			9.3.3.11 Probe Response frame format
			9.3.3.12 Authentication frame format
			9.3.3.13 Deauthentication
			9.3.3.14 Action frame format
			9.3.3.15 Action No Ack frame format
			9.3.3.16 Timing Advertisement frame format
		9.3.4 Extension frames
			9.3.4.1 Format of Extension frames
			9.3.4.2 DMG Beacon
		9.3.5 Frame addressing in an MBSS
	9.4 Management and Extension frame body components
		9.4.1 Fields that are not elements
			9.4.1.1 Authentication Algorithm Number field
			9.4.1.2 Authentication Transaction Sequence Number field
			9.4.1.3 Beacon Interval field
			9.4.1.4 Capability Information field
			9.4.1.5 Current AP Address field
			9.4.1.6 Listen Interval field
			9.4.1.7 Reason Code field
			9.4.1.8 AID field
			9.4.1.9 Status Code field
			9.4.1.10 Timestamp field
			9.4.1.11 Action field
			9.4.1.12 Dialog Token field
			9.4.1.13 DLS Timeout Value field
			9.4.1.14 Block Ack Parameter Set field
			9.4.1.15 Block Ack Timeout Value field
			9.4.1.16 DELBA Parameter Set field
			9.4.1.17 QoS Info field
			9.4.1.18 Measurement Pilot Interval field
			9.4.1.19 Max Transmit Power field
			9.4.1.20 Transmit Power Used field
			9.4.1.21 Channel Width field
			9.4.1.22 Operating Class and Channel field
			9.4.1.23 SM Power Control field
			9.4.1.24 PCO Phase Control field
			9.4.1.25 PSMP Parameter Set field
			9.4.1.26 PSMP STA Info field
			9.4.1.27 MIMO Control field
			9.4.1.28 CSI Report field
			9.4.1.29 Noncompressed Beamforming Report field
			9.4.1.30 Compressed Beamforming Report field
			9.4.1.31 Antenna Selection Indices field
			9.4.1.32 Organization Identifier field
			9.4.1.33 Rate Identification field
			9.4.1.34 GAS Query Response Fragment ID field
			9.4.1.35 Venue Info field
			9.4.1.36 Target Channel
			9.4.1.37 Operating Class
			9.4.1.38 Send-Confirm field
			9.4.1.39 Anti-Clogging Token field
			9.4.1.40 Scalar field
			9.4.1.41 Finite field element (FFE) field
			9.4.1.42 Confirm field
			9.4.1.43 Finite Cyclic Group field
			9.4.1.44 TXOP Reservation field
			9.4.1.45 Relay Capable STA Info field
			9.4.1.46 Band ID field
			9.4.1.47 DMG Parameters field
			9.4.1.48 VHT MIMO Control field
			9.4.1.49 VHT Compressed Beamforming Report field
			9.4.1.50 TVHT Compressed Beamforming Report field
			9.4.1.51 MU Exclusive Beamforming Report field
			9.4.1.52 TVHT MU Exclusive Beamforming Report field
			9.4.1.53 Operating Mode field
			9.4.1.54 Membership Status Array field
			9.4.1.55 User Position Array field
			9.4.1.56 Device Location Information Body field
			9.4.1.57 WSM Type field and WSM Information field
		9.4.2 Elements
			9.4.2.1 General
			9.4.2.2 SSID element
			9.4.2.3 Supported Rates and BSS Membership Selectors element
			9.4.2.4 DSSS Parameter Set element
			9.4.2.5 CF Parameter Set element
			9.4.2.6 TIM element
			9.4.2.7 IBSS Parameter Set element
			9.4.2.8 Challenge Text element
			9.4.2.9 Country element
			9.4.2.10 Request element
			9.4.2.11 Extended Request element
			9.4.2.12 ERP element
			9.4.2.13 Extended Supported Rates and BSS Membership Selectors element
			9.4.2.14 Power Constraint element
			9.4.2.15 Power Capability element
			9.4.2.16 TPC Request element
			9.4.2.17 TPC Report element
			9.4.2.18 Supported Channels element
			9.4.2.19 Channel Switch Announcement element
			9.4.2.20 Secondary Channel Offset element
			9.4.2.21 Measurement Request element
				9.4.2.21.1 General
				9.4.2.21.2 Basic request
				9.4.2.21.3 CCA request (Clear channel access request)
				9.4.2.21.4 RPI histogram request (Received power indicator histogram request)
				9.4.2.21.5 Channel Load request
				9.4.2.21.6 Noise Histogram request
				9.4.2.21.7 Beacon request
				9.4.2.21.8 Frame request
				9.4.2.21.9 STA Statistics request
				9.4.2.21.10 LCI request (Location configuration information request)
				9.4.2.21.11 Transmit Stream/Category Measurement request
				9.4.2.21.12 Measurement Pause request
				9.4.2.21.13 Multicast Diagnostics request
				9.4.2.21.14 Location Civic request
				9.4.2.21.15 Location Identifier request
				9.4.2.21.16 Directional Channel Quality request
				9.4.2.21.17 Directional Measurement request
				9.4.2.21.18 Directional Statistics request
				9.4.2.21.19 Fine Timing Measurement Range request
			9.4.2.22 Measurement Report element
				9.4.2.22.1 General
				9.4.2.22.2 Basic report
				9.4.2.22.3 CCA report
				9.4.2.22.4 RPI histogram report
				9.4.2.22.5 Channel Load report
				9.4.2.22.6 Noise Histogram report
				9.4.2.22.7 Beacon report
				9.4.2.22.8 Frame report
				9.4.2.22.9 STA Statistics report
				9.4.2.22.10 LCI report (Location configuration information report)
				9.4.2.22.11 Transmit Stream/Category Measurement report
				9.4.2.22.12 Multicast Diagnostics report
				9.4.2.22.13 Location Civic report
				9.4.2.22.14 Location Identifier report
				9.4.2.22.15 Directional Channel Quality report
				9.4.2.22.16 Directional Measurement report
				9.4.2.22.17 Directional Statistics report
				9.4.2.22.18 Fine Timing Measurement Range report
			9.4.2.23 Quiet element
			9.4.2.24 IBSS DFS element
			9.4.2.25 RSNE
				9.4.2.25.1 General
				9.4.2.25.2 Cipher suites
				9.4.2.25.3 AKM suites
				9.4.2.25.4 RSN capabilities
				9.4.2.25.5 PMKID
			9.4.2.26 Vendor Specific element
			9.4.2.27 Extended Capabilities element
			9.4.2.28 BSS Load element
			9.4.2.29 EDCA Parameter Set element
			9.4.2.30 TSPEC element
			9.4.2.31 TCLAS element
			9.4.2.32 TS Delay element
			9.4.2.33 TCLAS Processing element
			9.4.2.34 Schedule element
			9.4.2.35 QoS Capability element
			9.4.2.36 AP Channel Report element
			9.4.2.37 Neighbor Report element
			9.4.2.38 RCPI element
			9.4.2.39 BSS Average Access Delay element
			9.4.2.40 Antenna element
			9.4.2.41 RSNI element
			9.4.2.42 Measurement Pilot Transmission element
			9.4.2.43 BSS Available Admission Capacity element
			9.4.2.44 BSS AC Access Delay element
			9.4.2.45 RM Enabled Capabilities element
			9.4.2.46 Multiple BSSID element
			9.4.2.47 Mobility Domain element (MDE)
			9.4.2.48 Fast BSS Transition element (FTE)
			9.4.2.49 Timeout Interval element (TIE)
			9.4.2.50 RIC Data element (RDE)
			9.4.2.51 RIC Descriptor element
			9.4.2.52 DSE Registered Location element
			9.4.2.53 Extended Channel Switch Announcement element
			9.4.2.54 Supported Operating Classes element
			9.4.2.55 Management MIC element
			9.4.2.56 HT Capabilities element
				9.4.2.56.1 HT Capabilities element structure
				9.4.2.56.2 HT Capability Information field
				9.4.2.56.3 A-MPDU Parameters field
				9.4.2.56.4 Supported MCS Set field
				9.4.2.56.5 HT Extended Capabilities field
				9.4.2.56.6 Transmit Beamforming Capabilities
				9.4.2.56.7 ASEL Capability field
			9.4.2.57 HT Operation element
			9.4.2.58 20/40 BSS Intolerant Channel Report element
			9.4.2.59 Overlapping BSS Scan Parameters element
			9.4.2.60 20/40 BSS Coexistence element
			9.4.2.61 Time Advertisement element
			9.4.2.62 Link Identifier element
			9.4.2.63 Wakeup Schedule element
			9.4.2.64 Channel Switch Timing element
			9.4.2.65 PTI Control element
			9.4.2.66 TPU Buffer Status element
			9.4.2.67 Event Request element
				9.4.2.67.1 Event Request definition
				9.4.2.67.2 Transition event request
				9.4.2.67.3 RSNA event request
				9.4.2.67.4 Peer-to-peer link event request
				9.4.2.67.5 Vendor Specific event request
			9.4.2.68 Event Report element
				9.4.2.68.1 Event Report Definition
				9.4.2.68.2 Transition event report
				9.4.2.68.3 RSNA event report
				9.4.2.68.4 Peer-to-peer link event report
				9.4.2.68.5 WNM log event report
				9.4.2.68.6 Vendor Specific event report
			9.4.2.69 Diagnostic Request element
				9.4.2.69.1 Diagnostic Request definition
				9.4.2.69.2 Association Diagnostic request
				9.4.2.69.3 IEEE 802.1X Authentication Diagnostic request
				9.4.2.69.4 Vendor Specific diagnostic request
				9.4.2.69.5 Diagnostic subelement descriptions
			9.4.2.70 Diagnostic Report element
				9.4.2.70.1 Diagnostic report definition
				9.4.2.70.2 Manufacturer Information STA Report
				9.4.2.70.3 Configuration Profile report
				9.4.2.70.4 Association Diagnostic report
				9.4.2.70.5 IEEE 802.1X Authentication Diagnostic report
				9.4.2.70.6 Vendor Specific diagnostic report
			9.4.2.71 Location Parameters element
				9.4.2.71.1 Location Parameters definition
				9.4.2.71.2 Location Indication Parameters subelement
				9.4.2.71.3 Location Indication Channels subelement
				9.4.2.71.4 Location Status subelement
				9.4.2.71.5 Radio subelement
				9.4.2.71.6 Motion subelement
				9.4.2.71.7 Location Indication Broadcast Data Rate subelement
				9.4.2.71.8 Time of Departure subelement
				9.4.2.71.9 Location Indication Options subelement
			9.4.2.72 Nontransmitted BSSID Capability element
			9.4.2.73 SSID List element
			9.4.2.74 Multiple BSSID-Index element
			9.4.2.75 FMS Descriptor element
			9.4.2.76 FMS Request element
			9.4.2.77 FMS Response element
			9.4.2.78 QoS Traffic Capability element
			9.4.2.79 BSS Max Idle Period element
			9.4.2.80 TFS Request element
			9.4.2.81 TFS Response element
			9.4.2.82 WNM Sleep Mode element
			9.4.2.83 TIM Broadcast Request element
			9.4.2.84 TIM Broadcast Response element
			9.4.2.85 Collocated Interference Report element
			9.4.2.86 Channel Usage element
			9.4.2.87 Time Zone element
			9.4.2.88 DMS Request element
			9.4.2.89 DMS Response element
			9.4.2.90 Destination URI element
			9.4.2.91 U-APSD Coexistence element
			9.4.2.92 Interworking element
			9.4.2.93 Advertisement Protocol element
			9.4.2.94 Expedited Bandwidth Request element
			9.4.2.95 QoS Map element
			9.4.2.96 Roaming Consortium element
			9.4.2.97 Emergency Alert Identifier element
			9.4.2.98 Mesh Configuration element
				9.4.2.98.1 General
				9.4.2.98.2 Active Path Selection Protocol Identifier
				9.4.2.98.3 Active Path Selection Metric Identifier
				9.4.2.98.4 Congestion Control Mode Identifier
				9.4.2.98.5 Synchronization Method Identifier
				9.4.2.98.6 Authentication Protocol Identifier
				9.4.2.98.7 Mesh Formation Info
				9.4.2.98.8 Mesh Capability
			9.4.2.99 Mesh ID element
			9.4.2.100 Mesh Link Metric Report element
			9.4.2.101 Congestion Notification element
			9.4.2.102 Mesh Peering Management element
			9.4.2.103 Mesh Channel Switch Parameters element
			9.4.2.104 Mesh Awake Window element
			9.4.2.105 Beacon Timing element
			9.4.2.106 MCCAOP Setup Request element
				9.4.2.106.1 General
				9.4.2.106.2 MCCAOP Reservation field
			9.4.2.107 MCCAOP Setup Reply element
			9.4.2.108 MCCAOP Advertisement Overview element
			9.4.2.109 MCCAOP Advertisement element
				9.4.2.109.1 General
				9.4.2.109.2 MCCAOP Advertisement Element Information field
				9.4.2.109.3 MCCAOP Reservation Report field
			9.4.2.110 MCCAOP Teardown element
			9.4.2.111 GANN element
			9.4.2.112 RANN element
			9.4.2.113 PREQ element
			9.4.2.114 PREP element
			9.4.2.115 PERR element
			9.4.2.116 PXU element
			9.4.2.117 PXUC element
			9.4.2.118 Authenticated Mesh Peering Exchange element
			9.4.2.119 MIC element
			9.4.2.120 Quality-of-Service Management Frame Policy element
			9.4.2.121 Intra-Access Category Priority element
			9.4.2.122 SCS Descriptor element
			9.4.2.123 QLoad Report element
				9.4.2.123.1 QLoad Report element format
				9.4.2.123.2 QLoad field format
			9.4.2.124 HCCA TXOP Update Count element
			9.4.2.125 Higher Layer Stream ID element
			9.4.2.126 GCR Group Address element
			9.4.2.127 DMG BSS Parameter Change element
			9.4.2.128 DMG Capabilities element
				9.4.2.128.1 General
				9.4.2.128.2 DMG STA Capability Information field
				9.4.2.128.3 DMG AP Or PCP Capability Information field
				9.4.2.128.4 DMG STA Beam Tracking Time Limit field
				9.4.2.128.5 Extended SC MCS Capabilities field
				9.4.2.128.6 Maximum number of A-MSDU subframes in an A-MSDU
			9.4.2.129 DMG Operation element
			9.4.2.130 DMG Beam Refinement element
			9.4.2.131 DMG Wakeup Schedule element
			9.4.2.132 Extended Schedule element
			9.4.2.133 STA Availability element
			9.4.2.134 DMG TSPEC element
			9.4.2.135 Next DMG ATI element
			9.4.2.136 Channel Measurement Feedback element
			9.4.2.137 Awake Window element
			9.4.2.138 Multi-band element
			9.4.2.139 ADDBA Extension element
			9.4.2.140 Next PCP List element
			9.4.2.141 PCP Handover element
			9.4.2.142 DMG Link Margin element
				9.4.2.142.1 General
				9.4.2.142.2 Activity field
			9.4.2.143 DMG Link Adaptation Acknowledgment element
			9.4.2.144 Switching Stream element
			9.4.2.145 Session Transition element
			9.4.2.146 Dynamic Tone Pairing (DTP) Report element
			9.4.2.147 Cluster Report element
			9.4.2.148 Relay Capabilities element
			9.4.2.149 Relay Transfer Parameter Set element
			9.4.2.150 Quiet Period Request element
			9.4.2.151 Quiet Period Response element
			9.4.2.152 BeamLink Maintenance element
			9.4.2.153 Multiple MAC Sublayers (MMS) element
			9.4.2.154 U-PID element
			9.4.2.155 ECAPC Policy element
			9.4.2.156 Cluster Time Offset element
			9.4.2.157 Antenna Sector ID Pattern element
			9.4.2.158 VHT Capabilities element
				9.4.2.158.1 VHT Capabilities element structure
				9.4.2.158.2 VHT Capabilities Information field
				9.4.2.158.3 Supported VHT-MCS and NSS Set field
			9.4.2.159 VHT Operation element
			9.4.2.160 Extended BSS Load element
			9.4.2.161 Wide Bandwidth Channel Switch element
			9.4.2.162 Transmit Power Envelope element
			9.4.2.163 Channel Switch Wrapper element
			9.4.2.164 AID element
			9.4.2.165 Quiet Channel element
			9.4.2.166 Operating Mode Notification element
			9.4.2.167 UPSIM element
			9.4.2.168 Fine Timing Measurement Parameters element
			9.4.2.169 Device Location element
			9.4.2.170 White Space Map element
			9.4.2.171 Reduced Neighbor Report element
				9.4.2.171.1 Neighbor AP Information field
			9.4.2.172 TVHT Operation element
			9.4.2.173 FTM Synchronization Information element
			9.4.2.174 Estimated service parameters element
			9.4.2.175 Future Channel Guidance element
		9.4.3 Subelements
		9.4.4 TLV encodings
			9.4.4.1 General
			9.4.4.2 Common TLVs
				9.4.4.2.1 Device Class
				9.4.4.2.2 Device Identification Information
				9.4.4.2.3 Device Location Information
				9.4.4.2.4 Channel Schedule Descriptor
				9.4.4.2.5 WSM information values
		9.4.5 Access network query protocol (ANQP) elements
			9.4.5.1 General
			9.4.5.2 Query List ANQP-element
			9.4.5.3 Capability List ANQP-element
			9.4.5.4 Venue Name ANQP-element
			9.4.5.5 Emergency Call Number ANQP-element
			9.4.5.6 Network Authentication Type ANQP-element
			9.4.5.7 Roaming Consortium ANQP-element
			9.4.5.8 Vendor Specific ANQP-element
			9.4.5.9 IP Address Type Availability ANQP-element
			9.4.5.10 NAI Realm ANQP-element
			9.4.5.11 3GPP Cellular Network ANQP-element
			9.4.5.12 AP Geospatial Location ANQP-element
			9.4.5.13 AP Civic Location ANQP-element
			9.4.5.14 AP Location Public Identifier URI/FQDN ANQP-element
			9.4.5.15 Domain Name ANQP-element
			9.4.5.16 Emergency Alert URI ANQP-element
			9.4.5.17 Emergency NAI ANQP-element
			9.4.5.18 TDLS Capability ANQP-element
			9.4.5.19 Neighbor Report ANQP-element
			9.4.5.20 Venue URL ANQP-element
			9.4.5.21 Advice of Charge ANQP-element
			9.4.5.22 Local Content ANQP-element
			9.4.5.23 Network Authentication Type with Timestamp ANQP-element
		9.4.6 Registered location query protocol (RLQP) elements
			9.4.6.1 General
			9.4.6.2 Channel Availability Query RLQP-element
			9.4.6.3 Channel Schedule Management RLQP-element
			9.4.6.4 Network Channel Control RLQP-element
			9.4.6.5 Vendor Specific RLQP-element
	9.5 Fields used in Management and Extension frame bodies and Control frames
		9.5.1 Sector Sweep field
		9.5.2 Dynamic Allocation Info field
		9.5.3 Sector Sweep Feedback field
		9.5.4 BRP Request field
		9.5.5 Beamforming Control field
		9.5.6 Beamformed Link Maintenance field
	9.6 Action frame format details
		9.6.1 Introduction
		9.6.2 Spectrum management Action frames
			9.6.2.1 General
			9.6.2.2 Measurement Request frame format
			9.6.2.3 Measurement Report frame format
			9.6.2.4 TPC Request frame format
			9.6.2.5 TPC Report frame format
			9.6.2.6 Channel Switch Announcement frame format
		9.6.3 QoS Action frame details
			9.6.3.1 General
			9.6.3.2 Basic and DMG ADDTS Request frame format
				9.6.3.2.1 Basic ADDTS Request frame variant
				9.6.3.2.2 DMG ADDTS Request frame variant
			9.6.3.3 Basic and DMG ADDTS Response frame format
				9.6.3.3.1 Basic ADDTS Response frame variant
				9.6.3.3.2 DMG ADDTS Response frame variant
			9.6.3.4 DELTS frame format
			9.6.3.5 Schedule frame format
			9.6.3.6 QoS Map Configure frame format
			9.6.3.7 ADDTS Reserve Request frame format
			9.6.3.8 ADDTS Reserve Response frame format
		9.6.4 DLS Action frame details
			9.6.4.1 General
			9.6.4.2 DLS Request frame format
			9.6.4.3 DLS Response frame format
			9.6.4.4 DLS Teardown frame format
		9.6.5 Block Ack Action frame details
			9.6.5.1 General
			9.6.5.2 ADDBA Request frame format
			9.6.5.3 ADDBA Response frame format
			9.6.5.4 DELBA frame format
		9.6.6 Vendor-specific action details
		9.6.7 Radio Measurement action details
			9.6.7.1 General
			9.6.7.2 Radio Measurement Request frame format
			9.6.7.3 Radio Measurement Report frame format
			9.6.7.4 Link Measurement Request frame format
			9.6.7.5 Link Measurement Report frame format
			9.6.7.6 Neighbor Report Request frame format
			9.6.7.7 Neighbor Report Response frame format
		9.6.8 Public Action details
			9.6.8.1 Public Action frames
			9.6.8.2 20/40 BSS Coexistence Management frame format
			9.6.8.3 Measurement Pilot frame format
			9.6.8.4 DSE Enablement frame format
			9.6.8.5 DSE Deenablement frame format
			9.6.8.6 DSE Registered Location Announcement frame format
			9.6.8.7 Extended Channel Switch Announcement frame format
			9.6.8.8 DSE Measurement Request frame format
			9.6.8.9 DSE Measurement Report frame format
			9.6.8.10 DSE Power Constraint frame format
			9.6.8.11 Vendor Specific Public Action frame format
			9.6.8.12 GAS Initial Request frame format
			9.6.8.13 GAS Initial Response frame format
			9.6.8.14 GAS Comeback Request frame format
			9.6.8.15 GAS Comeback Response frame format
			9.6.8.16 TDLS Discovery Response frame format
			9.6.8.17 Location Track Notification frame format
			9.6.8.18 QMF Policy frame format
			9.6.8.19 QMF Policy Change frame format
			9.6.8.20 QLoad Request frame format
			9.6.8.21 QLoad Report frame format
			9.6.8.22 HCCA TXOP Advertisement frame
			9.6.8.23 HCCA TXOP Response frame
			9.6.8.24 Public Key frame
			9.6.8.25 Channel Availability Query frame format
			9.6.8.26 Channel Schedule Management frame format
			9.6.8.27 Contact Verification Signal frame format
			9.6.8.28 GDD Enablement Request frame format
			9.6.8.29 GDD Enablement Response frame format
			9.6.8.30 Network Channel Control frame format
			9.6.8.31 White Space Map Announcement frame format
			9.6.8.32 Fine Timing Measurement Request frame format
			9.6.8.33 Fine Timing Measurement frame format
			9.6.8.34 QAB Request frame format
			9.6.8.35 QAB Response frame format
		9.6.9 FT Action frame details
			9.6.9.1 General
			9.6.9.2 FT Request frame
			9.6.9.3 FT Response frame
			9.6.9.4 FT Confirm frame
			9.6.9.5 FT Ack frame
		9.6.10 SA Query Action frame details
			9.6.10.1 General
			9.6.10.2 SA Query Request frame
			9.6.10.3 SA Query Response frame
		9.6.11 Protected Dual of Public Action frames
		9.6.12 HT Action frame details
			9.6.12.1 HT Action field
			9.6.12.2 Notify Channel Width frame format
			9.6.12.3 SM Power Save frame format
			9.6.12.4 PSMP frame format
			9.6.12.5 Set PCO Phase frame format
			9.6.12.6 CSI frame format
			9.6.12.7 Noncompressed Beamforming frame format
			9.6.12.8 Compressed Beamforming frame format
			9.6.12.9 Antenna Selection Indices Feedback frame format
		9.6.13 TDLS Action field formats
			9.6.13.1 General
			9.6.13.2 TDLS Setup Request Action field format
			9.6.13.3 TDLS Setup Response Action field format
			9.6.13.4 TDLS Setup Confirm Action field format
			9.6.13.5 TDLS Teardown Action field format
			9.6.13.6 TDLS Peer Traffic Indication Action field format
			9.6.13.7 TDLS Channel Switch Request Action field format
			9.6.13.8 TDLS Channel Switch Response Action field format
			9.6.13.9 TDLS Peer PSM Request Action field format
			9.6.13.10 TDLS Peer PSM Response Action field format
			9.6.13.11 TDLS Peer Traffic Response Action field format
			9.6.13.12 TDLS Discovery Request Action field format
		9.6.14 WNM Action details
			9.6.14.1 WNM Action fields
			9.6.14.2 Event Request frame format
			9.6.14.3 Event Report frame format
			9.6.14.4 Diagnostic Request frame format
			9.6.14.5 Diagnostic Report frame format
			9.6.14.6 Location Configuration Request frame format
			9.6.14.7 Location Configuration Response frame format
			9.6.14.8 BSS Transition Management Query frame format
			9.6.14.9 BSS Transition Management Request frame format
			9.6.14.10 BSS Transition Management Response frame format
			9.6.14.11 FMS Request frame format
			9.6.14.12 FMS Response frame format
			9.6.14.13 Collocated Interference Request frame format
			9.6.14.14 Collocated Interference Report frame format
			9.6.14.15 TFS Request frame format
			9.6.14.16 TFS Response frame format
			9.6.14.17 TFS Notify frame format
			9.6.14.18 TFS Notify Response frame format
			9.6.14.19 WNM Sleep Mode Request frame format
			9.6.14.20 WNM Sleep Mode Response frame format
			9.6.14.21 TIM Broadcast Request frame format
			9.6.14.22 TIM Broadcast Response frame format
			9.6.14.23 QoS Traffic Capability Update frame format
			9.6.14.24 Channel Usage Request frame format
			9.6.14.25 Channel Usage Response frame format
			9.6.14.26 DMS Request frame format
			9.6.14.27 DMS Response frame format
			9.6.14.28 Timing Measurement Request frame format
			9.6.14.29 WNM Notification Request frame format
			9.6.14.30 WNM Notification Response frame format
		9.6.15 Unprotected WNM Action details
			9.6.15.1 Unprotected WNM Action fields
			9.6.15.2 TIM frame format
			9.6.15.3 Timing Measurement frame format
		9.6.16 Self-protected Action frame details
			9.6.16.1 Self-protected Action fields
			9.6.16.2 Mesh Peering Open frame format
				9.6.16.2.1 Mesh Peering Open frame self protection
				9.6.16.2.2 Mesh Peering Open frame details
			9.6.16.3 Mesh Peering Confirm frame format
				9.6.16.3.1 Mesh Peering Confirm frame self protection
				9.6.16.3.2 Mesh Peering Confirm frame details
			9.6.16.4 Mesh Peering Close frame format
				9.6.16.4.1 Mesh Peering Close frame self protection
				9.6.16.4.2 Mesh Peering Close frame details
			9.6.16.5 Mesh Group Key Inform frame format
				9.6.16.5.1 Mesh Group Key Inform frame self protection
				9.6.16.5.2 Mesh Group Key Inform frame details
			9.6.16.6 Mesh Group Key Acknowledge frame format
				9.6.16.6.1 Mesh Group Key Acknowledge frame self protection
				9.6.16.6.2 Mesh Group Key Acknowledge frame details
		9.6.17 Mesh Action frame details
			9.6.17.1 Mesh Action fields
			9.6.17.2 Mesh Link Metric Report frame format
			9.6.17.3 HWMP Mesh Path Selection frame format
			9.6.17.4 Gate Announcement frame format
			9.6.17.5 Congestion Control Notification frame format
			9.6.17.6 MCCA Setup Request frame format
			9.6.17.7 MCCA Setup Reply frame format
			9.6.17.8 MCCA Advertisement Request frame format
			9.6.17.9 MCCA Advertisement frame format
			9.6.17.10 MCCA Teardown frame format
			9.6.17.11 TBTT Adjustment Request frame format
			9.6.17.12 TBTT Adjustment Response frame format
		9.6.18 Multihop Action frame details
			9.6.18.1 Multihop Action fields
			9.6.18.2 Proxy Update frame format
			9.6.18.3 Proxy Update Confirmation frame format
		9.6.19 Robust AV Streaming Action frame details
			9.6.19.1 General
			9.6.19.2 SCS Request frame format
			9.6.19.3 SCS Response frame format
			9.6.19.4 Group Membership Request frame format
			9.6.19.5 Group Membership Response frame format
		9.6.20 DMG Action frame details
			9.6.20.1 DMG Action field
			9.6.20.2 Power Save Configuration Request frame format
			9.6.20.3 Power Save Configuration Response frame format
			9.6.20.4 Information Request frame format
			9.6.20.5 Information Response frame format
			9.6.20.6 Handover Request frame format
			9.6.20.7 Handover Response frame format
			9.6.20.8 DTP Request frame format
			9.6.20.9 DTP Report frame format
			9.6.20.10 Relay Search Request frame format
			9.6.20.11 Relay Search Response frame format
			9.6.20.12 Multi-relay Channel Measurement Request frame format
			9.6.20.13 Multi-relay Channel Measurement Report frame format
			9.6.20.14 RLS Request frame format
			9.6.20.15 RLS Response frame format
			9.6.20.16 RLS Announcement frame format
			9.6.20.17 RLS Teardown frame format
			9.6.20.18 Relay Ack Request frame format
			9.6.20.19 Relay Ack Response frame format
			9.6.20.20 TPA Request frame format
			9.6.20.21 TPA Response frame format
			9.6.20.22 TPA Report frame format
			9.6.20.23 ROC Request frame format
			9.6.20.24 ROC Response frame format
		9.6.21 FST Action frame details
			9.6.21.1 FST Action field
			9.6.21.2 FST Setup Request frame format
			9.6.21.3 FST Setup Response frame format
			9.6.21.4 FST Teardown frame format
			9.6.21.5 FST Ack Request frame format
			9.6.21.6 FST Ack Response frame format
			9.6.21.7 On-channel Tunnel Request frame format
		9.6.22 Unprotected DMG Action frame details
			9.6.22.1 Unprotected DMG Action field
			9.6.22.2 Announce frame format
			9.6.22.3 BRP frame format
		9.6.23 VHT Action frame details
			9.6.23.1 VHT Action field
			9.6.23.2 VHT Compressed Beamforming frame format
			9.6.23.3 Group ID Management frame format
			9.6.23.4 Operating Mode Notification frame format
	9.7 Aggregate MPDU (A-MPDU)
		9.7.1 A-MPDU format
		9.7.2 MPDU delimiter CRC field
		9.7.3 A-MPDU contents
10. MAC sublayer functional description
	10.1 Introduction
	10.2 MAC architecture
		10.2.1 General
		10.2.2 DCF
		10.2.3 PCF
		10.2.4 Hybrid coordination function (HCF)
			10.2.4.1 General
			10.2.4.2 HCF contention based channel access (EDCA)
			10.2.4.3 HCF controlled channel access (HCCA)
		10.2.5 Mesh coordination function (MCF)
		10.2.6 Combined use of DCF, PCF, and HCF
		10.2.7 Fragmentation/defragmentation overview
		10.2.8 MAC data service
	10.3 DCF
		10.3.1 General
		10.3.2 Procedures common to the DCF and EDCAF
			10.3.2.1 CS mechanism
			10.3.2.2 MAC-level acknowledgments
			10.3.2.3 IFS
				10.3.2.3.1 General
				10.3.2.3.2 RIFS
				10.3.2.3.3 SIFS
				10.3.2.3.4 PIFS
				10.3.2.3.5 DIFS
				10.3.2.3.6 AIFS
				10.3.2.3.7 EIFS
				10.3.2.3.8 SBIFS
				10.3.2.3.9 BRPIFS
				10.3.2.3.10 MBIFS
				10.3.2.3.11 LBIFS
			10.3.2.4 Setting and resetting the NAV
			10.3.2.5 RTS/CTS with fragmentation
			10.3.2.6 VHT RTS procedure
			10.3.2.7 CTS and DMG CTS procedure
			10.3.2.8 Dual CTS protection
				10.3.2.8.1 Dual CTS protection procedure
				10.3.2.8.2 Dual CTS protection examples
			10.3.2.9 Acknowledgment procedure
			10.3.2.10 MU acknowledgment procedure
			10.3.2.11 Duplicate detection and recovery
				10.3.2.11.1 General
				10.3.2.11.2 Transmitter requirements
				10.3.2.11.3 Receiver requirements
			10.3.2.12 NAV distribution
			10.3.2.13 Operation of aSlotTime
		10.3.3 Random backoff time
		10.3.4 DCF access procedure
			10.3.4.1 Introduction
			10.3.4.2 Basic access
			10.3.4.3 Backoff procedure for DCF
			10.3.4.4 Recovery procedures and retransmit limits
			10.3.4.5 Control of the channel
		10.3.5 Individually addressed MPDU transfer procedure
		10.3.6 Group addressed MPDU transfer procedure
		10.3.7 DCF timing relations
		10.3.8 Signal extension
		10.3.9 Determination of PLME aCWmin characteristics
	10.4 PCF
		10.4.1 General
		10.4.2 CFP structure and timing
		10.4.3 PCF access procedure
			10.4.3.1 General
			10.4.3.2 Fundamental access
			10.4.3.3 NAV operation during the CFP
		10.4.4 PCF transfer procedure
			10.4.4.1 General
			10.4.4.2 PCF transfers when the PC STA is transmitter or recipient
			10.4.4.3 Operation with overlapping point-coordinated BSSs
			10.4.4.4 CFPMaxDuration limit
			10.4.4.5 CF usage rules
		10.4.5 CF polling list
			10.4.5.1 General
			10.4.5.2 Polling list processing
			10.4.5.3 Polling list update procedure
	10.5 Fragmentation
	10.6 Defragmentation
	10.7 Multirate support
		10.7.1 Overview
		10.7.2 Basic HT-MCS Set field
		10.7.3 Basic STBC MCS
		10.7.4 Basic rate set, basic HT-MCS set, and basic VHT-MCS and NSS set for mesh STA
		10.7.5 Rate selection for Data and Management frames
			10.7.5.1 Rate selection for non-STBC Beacon and non-STBC PSMP frames
			10.7.5.2 Rate selection for STBC group addressed Data and Management frames
			10.7.5.3 Rate selection for other group addressed Data and Management frames
			10.7.5.4 Rate selection for polling frames
			10.7.5.5 Rate selection for +CF-Ack frames
			10.7.5.6 Rate selection for Data frames sent within an FMS stream
			10.7.5.7 Rate selection for other individually addressed Data and Management frames
		10.7.6 Rate selection for Control frames
			10.7.6.1 General rules for rate selection for Control frames
			10.7.6.2 Rate selection for Control frames that initiate a TXOP
			10.7.6.3 Rate selection for CF-End frames
			10.7.6.4 Rate selection for Control frames that are not control response frames
			10.7.6.5 Rate selection for control response frames
				10.7.6.5.1 Introduction
				10.7.6.5.2 Selection of a rate or MCS
				10.7.6.5.3 Control response frame MCS computation
				10.7.6.5.4 Selection of an alternate rate or MCS for a control response frame
				10.7.6.5.5 Control response frame TXVECTOR parameter restrictions
			10.7.6.6 Channel Width selection for Control frames
			10.7.6.7 Control frame TXVECTOR parameter restrictions
		10.7.7 Multirate support for DMG STAs
			10.7.7.1 Usage of DMG Control modulation class
			10.7.7.2 Rate selection rules for Control frames transmitted by DMG STAs
			10.7.7.3 Rate selection for group addressed Data and Management frames transmitted by DMG STAs
			10.7.7.4 Rate selection for individually addressed Data and Management frames transmitted by DMG STAs
			10.7.7.5 Rate selection for BRP packets
		10.7.8 Multiple BSSID Rate Selection
		10.7.9 Modulation classes
		10.7.10 Non-HT basic rate calculation
		10.7.11 Channel Width in non-HT and non-HT duplicate PPDUs
		10.7.12 Rate selection constraints for VHT STAs
			10.7.12.1 Rx Supported VHT-MCS and NSS Set
			10.7.12.2 Tx Supported VHT-MCS and NSS Set
			10.7.12.3 Additional rate selection constraints for VHT PPDUs
	10.8 MSDU transmission restrictions
	10.9 HT Control field operation
	10.10 Control Wrapper operation
	10.11 MSDU processing
	10.12 A-MSDU operation
	10.13 A-MPDU operation
		10.13.1 A-MPDU contents
		10.13.2 A-MPDU length limit rules
		10.13.3 Minimum MPDU Start Spacing field
		10.13.4 A-MPDU aggregation of group addressed Data frames
		10.13.5 Transport of A-MPDU by the PHY data service
		10.13.6 A-MPDU padding for VHT PPDU
		10.13.7 Setting the EOF field of the MPDU delimiter
		10.13.8 Transport of VHT single MPDUs
	10.14 PPDU duration constraint
	10.15 DMG A-PPDU operation
	10.16 LDPC operation
	10.17 STBC operation
	10.18 Short GI operation
	10.19 Greenfield operation
	10.20 Group ID and partial AID in VHT PPDUs
	10.21 Operation across regulatory domains
		10.21.1 General
		10.21.2 Operation upon entering a regulatory domain
		10.21.3 Operation with operating classes
		10.21.4 Operation with the Transmit Power Envelope element
		10.21.5 Operation with coverage classes
	10.22 HCF
		10.22.1 General
		10.22.2 HCF contention based channel access (EDCA)
			10.22.2.1 Reference model
			10.22.2.2 EDCA backoff procedure
			10.22.2.3 EDCA TXOPs
			10.22.2.4 Obtaining an EDCA TXOP
			10.22.2.5 EDCA channel access in a VHT or TVHT BSS
			10.22.2.6 Sharing an EDCA TXOP
			10.22.2.7 Multiple frame transmission in an EDCA TXOP
			10.22.2.8 TXOP limits
			10.22.2.9 Truncation of TXOP
			10.22.2.10 Termination of TXOP
			10.22.2.11 Retransmit procedures
				10.22.2.11.1 General
				10.22.2.11.2 Unsolicited retry procedure
		10.22.3 HCF controlled channel access (HCCA)
			10.22.3.1 General
			10.22.3.2 HCCA procedure
				10.22.3.2.1 General
				10.22.3.2.2 CFP generation
				10.22.3.2.3 CAP generation
				10.22.3.2.4 Recovery from the absence of an expected reception
			10.22.3.3 HCCA TXOP structure and timing
			10.22.3.4 NAV operation of a TXOP under HCCA
			10.22.3.5 HCCA transfer rules
				10.22.3.5.1 General
				10.22.3.5.2 TXOP requests
				10.22.3.5.3 Use of RTS/CTS
				10.22.3.5.4 HCCA transfer rules for a VHT STA
		10.22.4 Admission control at the HC
			10.22.4.1 General
			10.22.4.2 Contention based admission control procedures
				10.22.4.2.1 General
				10.22.4.2.2 Procedures at the AP
				10.22.4.2.3 Procedure at non-AP STAs
			10.22.4.3 Controlled-access admission control
	10.23 Mesh coordination function (MCF)
		10.23.1 General
		10.23.2 MCF contention based channel access
		10.23.3 MCF controlled channel access (MCCA)
			10.23.3.1 General
			10.23.3.2 MCCA activation
			10.23.3.3 MCCAOP reservations
			10.23.3.4 Neighborhood MCCAOP periods at a mesh STA
			10.23.3.5 MCCA access fraction (MAF)
			10.23.3.6 MCCAOP setup procedure
			10.23.3.7 MCCAOP advertisement
				10.23.3.7.1 General
				10.23.3.7.2 Construction of an MCCAOP advertisement set
				10.23.3.7.3 Setting the MCCAOP advertisement set sequence number
				10.23.3.7.4 Advertisement procedure
				10.23.3.7.5 Receipt of an MCCAOP advertisement
				10.23.3.7.6 Complete update of the tracked MCCAOP reservations of a neighbor mesh STA
				10.23.3.7.7 Partial update of the tracked MCCAOP reservations of a neighbor mesh STA
				10.23.3.7.8 MCCAOP advertisement request procedure
			10.23.3.8 MCCAOP teardown
				10.23.3.8.1 Conditions that trigger an MCCAOP teardown
				10.23.3.8.2 MCCAOP teardown procedure
			10.23.3.9 Access during MCCAOPs
				10.23.3.9.1 Access by MCCAOP owners
				10.23.3.9.2 Access during an MCCAOP by mesh STAs that are not the MCCAOP owner
			10.23.3.10 Interaction with time synchronization
	10.24 Block acknowledgment (block ack)
		10.24.1 Introduction
		10.24.2 Setup and modification of the block ack parameters
		10.24.3 Data and acknowledgment transfer using immediate block ack policy and delayed block ack policy
		10.24.4 Receive buffer operation
		10.24.5 Teardown of the block ack mechanism
		10.24.6 Selection of BlockAck and BlockAckReq variants
		10.24.7 HT-immediate block ack extensions
			10.24.7.1 Introduction to HT-immediate block ack extensions
			10.24.7.2 HT-immediate block ack architecture
			10.24.7.3 Scoreboard context control during full-state operation
			10.24.7.4 Scoreboard context control during partial-state operation
			10.24.7.5 Generation and transmission of BlockAck frames by an HT STA or DMG STA
			10.24.7.6 Receive reordering buffer control operation
				10.24.7.6.1 General
				10.24.7.6.2 Operation for each received Data frame
				10.24.7.6.3 Operation for each received BlockAckReq
			10.24.7.7 Originator’s behavior
			10.24.7.8 Maintaining block ack state at the originator
			10.24.7.9 Originator’s support of recipient’s partial state
		10.24.8 HT-delayed block ack extensions
			10.24.8.1 Introduction
			10.24.8.2 HT-delayed block ack negotiation
			10.24.8.3 Operation of HT-delayed block ack
		10.24.9 Protected block ack agreement
		10.24.10 GCR block ack
			10.24.10.1 Introduction
			10.24.10.2 Scoreboard context control during GCR block ack
			10.24.10.3 GCR block ack BlockAckReq and BlockAck frame exchanges
		10.24.11 DMG block ack with flow control
			10.24.11.1 General
			10.24.11.2 DMG block ack architecture with flow control
			10.24.11.3 Scoreboard context control with flow control
			10.24.11.4 Receive Reordering Buffer with flow control operation
				10.24.11.4.1 General
				10.24.11.4.2 Operation for DMG block ack agreement initialization
				10.24.11.4.3 Operation for each received Data frame
				10.24.11.4.4 Operation for ongoing release of received MPDUs
			10.24.11.5 Generation and transmission of BlockAck frame by a STA with flow control
			10.24.11.6 Originator’s behavior with flow control support
	10.25 No Acknowledgment (No Ack)
	10.26 Protection mechanisms
		10.26.1 Introduction
		10.26.2 Protection mechanism for non-ERP receivers
		10.26.3 Protection mechanisms for transmissions of HT PPDUs
			10.26.3.1 General
			10.26.3.2 Protection rules for HT STA operating a direct link
			10.26.3.3 RIFS protection
			10.26.3.4 Use of OBSS Non-HT STAs Present field
			10.26.3.5 Protection rules for an HT mesh STA
		10.26.4 L_LENGTH and L_DATARATE parameter values for HT-mixed format PPDUs
		10.26.5 L-SIG TXOP protection
			10.26.5.1 General rules
			10.26.5.2 L-SIG TXOP protection rules at the TXOP holder
			10.26.5.3 L-SIG TXOP protection rules at the TXOP responder
			10.26.5.4 L-SIG TXOP protection NAV update rule
		10.26.6 Protection rules for VHT STAs
	10.27 MAC frame processing
		10.27.1 Introduction
		10.27.2 Revision level field processing
		10.27.3 Duration/ID field processing
		10.27.4 Response to an invalid Action frame
		10.27.5 Operation of the Dialog Token field
		10.27.6 Element parsing
		10.27.7 Vendor specific element parsing
		10.27.8 Extensible element parsing
		10.27.9 Extensible subelement parsing
		10.27.10 Extensible TLV parsing
	10.28 Reverse direction protocol
		10.28.1 General
		10.28.2 Reverse direction (RD) exchange sequence
		10.28.3 Rules for RD initiator
		10.28.4 Rules for RD responder
	10.29 PSMP operation
		10.29.1 General
		10.29.2 Frame transmission mechanism during PSMP
			10.29.2.1 PSMP frame transmission (PSMP-DTT and PSMP-UTT)
			10.29.2.2 PSMP downlink transmission (PSMP-DTT)
			10.29.2.3 PSMP uplink transmission (PSMP-UTT)
			10.29.2.4 PSMP burst
			10.29.2.5 Resource allocation within a PSMP burst
			10.29.2.6 PSMP-UTT retransmission
			10.29.2.7 PSMP acknowledgment rules
			10.29.2.8 PSMP group addressed transmission rules
				10.29.2.8.1 Rules at the AP
				10.29.2.8.2 Rules at the STA
		10.29.3 Scheduled PSMP
		10.29.4 Unscheduled PSMP
	10.30 Sounding PPDUs
	10.31 Link adaptation
		10.31.1 Introduction
		10.31.2 Link adaptation using the HT variant HT Control field
		10.31.3 Link adaptation using the VHT variant HT Control field
	10.32 Transmit beamforming
		10.32.1 HT steering matrix calculations
		10.32.2 HT transmit beamforming with implicit feedback
			10.32.2.1 General
			10.32.2.2 Unidirectional implicit transmit beamforming
			10.32.2.3 Bidirectional implicit transmit beamforming
			10.32.2.4 Calibration
				10.32.2.4.1 Introduction
				10.32.2.4.2 Calibration capabilities
				10.32.2.4.3 Sounding exchange for calibration
				10.32.2.4.4 CSI reporting for calibration
		10.32.3 Explicit feedback beamforming
		10.32.4 VHT MU beamforming
	10.33 Antenna selection (ASEL)
		10.33.1 Introduction
		10.33.2 Procedure
	10.34 Null data packet (NDP) sounding
		10.34.1 HT NDP sounding protocol
		10.34.2 Transmission of an HT NDP
		10.34.3 Determination of HT NDP destination
		10.34.4 Determination of HT NDP source
		10.34.5 VHT sounding protocol
			10.34.5.1 General
			10.34.5.2 Rules for VHT sounding protocol sequences
			10.34.5.3 Rules for fragmented feedback in VHT sounding protocol sequences
		10.34.6 Transmission of a VHT NDP
	10.35 Mesh forwarding framework
		10.35.1 General
		10.35.2 Forwarding information
		10.35.3 Addressing and forwarding of individually addressed mesh Data frames
			10.35.3.1 At source mesh STAs (individually addressed)
			10.35.3.2 At intermediate and destination mesh STAs (individually addressed)
		10.35.4 Addressing and forwarding of group addressed mesh Data frames
			10.35.4.1 At source mesh STAs (group addressed)
			10.35.4.2 At recipient mesh STAs (group addressed)
		10.35.5 Addressing of Management frames and MMPDU forwarding
			10.35.5.1 General
			10.35.5.2 MMPDU forwarding using individually addressed Multihop Action frames
			10.35.5.3 MMPDU forwarding using group addressed Multihop Action frames
		10.35.6 Detection of duplicate MSDUs/MMPDUs
		10.35.7 Mesh STAs that do not forward
		10.35.8 MSDU forwarding and unknown destination
	10.36 DMG channel access
		10.36.1 General
		10.36.2 Access periods within a beacon interval
		10.36.3 ATI transmission rules
		10.36.4 DTI transmission rules
		10.36.5 Contention based access period (CBAP) transmission rules
		10.36.6 Channel access in scheduled DTI
			10.36.6.1 General
			10.36.6.2 Service period (SP) allocation
			10.36.6.3 Contention based access period (CBAP) allocation
			10.36.6.4 Pseudo-static allocations
			10.36.6.5 Guard time
			10.36.6.6 DMG protected period
				10.36.6.6.1 Introduction
				10.36.6.6.2 DMG protected period establishment and maintenance
				10.36.6.6.3 NAV update in DMG protected period
				10.36.6.6.4 Interference report
			10.36.6.7 Service period recovery
		10.36.7 Dynamic allocation of service period
			10.36.7.1 General
			10.36.7.2 Polling period (PP)
			10.36.7.3 Grant period (GP)
		10.36.8 Dynamic truncation of service period
		10.36.9 Dynamic extension of service period
		10.36.10 Updating multiple NAVs
	10.37 DMG AP or PCP clustering
		10.37.1 General
		10.37.2 Cluster formation
			10.37.2.1 Decentralized AP or PCP cluster formation
			10.37.2.2 Centralized AP or PCP cluster formation
		10.37.3 Cluster maintenance
			10.37.3.1 General cluster maintenance
			10.37.3.2 Decentralized AP or PCP cluster maintenance
			10.37.3.3 Centralized AP or PCP cluster maintenance
			10.37.3.4 Centralized AP or PCP cluster MAC requirements
		10.37.4 Cluster report and re-scheduling
		10.37.5 Decentralized AP or PCP cluster request
	10.38 DMG beamforming
		10.38.1 General
		10.38.2 Sector-level sweep (SLS) phase
			10.38.2.1 General
			10.38.2.2 Initiator sector sweep (ISS)
				10.38.2.2.1 General
				10.38.2.2.2 Initiator TXSS
				10.38.2.2.3 Initiator RXSS
			10.38.2.3 Responder sector sweep (RSS)
				10.38.2.3.1 General
				10.38.2.3.2 Responder TXSS
				10.38.2.3.3 Responder RXSS
			10.38.2.4 Sector sweep (SSW) feedback
			10.38.2.5 SSW ack
		10.38.3 Beam Refinement Protocol (BRP) phase
			10.38.3.1 General
			10.38.3.2 BRP setup subphase
		10.38.4 Beamforming in BTI
		10.38.5 Beamforming in A-BFT
			10.38.5.1 Allocation of A-BFT
			10.38.5.2 Operation during the A-BFT
			10.38.5.3 STA Beamforming after A-BFT
			10.38.5.4 Beamforming in A-BFT with multiple DMG antennas
		10.38.6 Beamforming in DTI
			10.38.6.1 General
			10.38.6.2 SLS phase execution
			10.38.6.3 Multiple sector ID capture (MIDC) subphase
				10.38.6.3.1 General
				10.38.6.3.2 MIDC subphase with MID and BC subphases
				10.38.6.3.3 MIDC subphase with MID subphase only
				10.38.6.3.4 MIDC subphase with BC subphase only
			10.38.6.4 BRP phase execution
				10.38.6.4.1 General
				10.38.6.4.2 Beam refinement transaction
				10.38.6.4.3 Beam refinement transaction after SLS
				10.38.6.4.4 Antenna configuration setting during a beam refinement transaction
		10.38.7 Beam tracking
		10.38.8 State machines
	10.39 DMG link adaptation
		10.39.1 General
		10.39.2 DMG TPC
		10.39.3 Fast link adaptation
	10.40 DMG dynamic tone pairing (DTP)
	10.41 DMG relay operation
		10.41.1 General
		10.41.2 Link switching
			10.41.2.1 General
			10.41.2.2 SP request and allocation
			10.41.2.3 Usage of RDS
			10.41.2.4 Relay frame exchange rules
				10.41.2.4.1 General
				10.41.2.4.2 Additional frame exchange rules for FD-AF RDS
				10.41.2.4.3 Additional frame exchange rules for HD-DF RDS
				10.41.2.4.4 Operation of FD-AF RDS
			10.41.2.5 Link monitoring
		10.41.3 Link cooperation
			10.41.3.1 TPA procedure
			10.41.3.2 Frame exchange operation
				10.41.3.2.1 General
				10.41.3.2.2 Cooperative transmission SP request and allocation
				10.41.3.2.3 Data transmission rules
		10.41.4 Relay link adaptation
11. MLME
	11.1 Synchronization
		11.1.1 General
		11.1.2 Basic approach
			11.1.2.1 TSF for an infrastructure BSS or a PBSS
			11.1.2.2 TSF for an IBSS
			11.1.2.3 TSF for an MBSS
		11.1.3 Maintaining synchronization
			11.1.3.1 General
			11.1.3.2 Beacon generation in non-DMG infrastructure networks
			11.1.3.3 Beacon generation in a DMG infrastructure BSS and in a PBSS
				11.1.3.3.1 General
				11.1.3.3.2 Beacon generation in a PBSS
				11.1.3.3.3 Beacon generation in a DMG infrastructure BSS
			11.1.3.4 DMG beacon generation before establishment of a BSS
			11.1.3.5 Beacon generation in an IBSS
			11.1.3.6 Beacon generation in an MBSS
			11.1.3.7 Beacon reception
			11.1.3.8 Multiple BSSID procedure
			11.1.3.9 TSF timer accuracy
		11.1.4 Acquiring synchronization, scanning
			11.1.4.1 General
			11.1.4.2 Passive scanning
				11.1.4.2.1 Passive scanning for non-DMG STAs
				11.1.4.2.2 Passive scanning for DMG STAs
			11.1.4.3 Active scanning
				11.1.4.3.1 Introduction
				11.1.4.3.2 Active scanning procedure for a non-DMG STA
				11.1.4.3.3 Active scanning procedure for a DMG STA
				11.1.4.3.4 Criteria for sending a probe response
				11.1.4.3.5 Contents of a probe response
				11.1.4.3.6 PCP selection in a PBSS
			11.1.4.4 Initializing a BSS
				11.1.4.4.1 General
				11.1.4.4.2 Initializing a DMG BSS
			11.1.4.5 Synchronizing with a BSS
			11.1.4.6 Operation of Supported Rates and BSS Membership Selectors element and Extended Supported Rates and BSS Membership Selectors element
		11.1.5 Adjusting STA timers
		11.1.6 Terminating a BSS
		11.1.7 Supported rates and extended supported rates advertisement
	11.2 Power management
		11.2.1 General
		11.2.2 Bufferable MMPDUs
		11.2.3 Power management in a non-DMG infrastructure network
			11.2.3.1 General
			11.2.3.2 STA power management modes
			11.2.3.3 AP TIM transmissions
			11.2.3.4 TIM types
			11.2.3.5 Power management with APSD
				11.2.3.5.1 Power management with APSD procedures
				11.2.3.5.2 U-APSD coexistence
			11.2.3.6 AP operation during the CP
			11.2.3.7 AP operation during the CFP
			11.2.3.8 Receive operation for STAs in PS mode during the CP
			11.2.3.9 Receive operation for STAs in PS mode during the CFP
			11.2.3.10 Receive operation using APSD
			11.2.3.11 STAs operating in the active mode
			11.2.3.12 AP aging function
			11.2.3.13 PSMP power management
			11.2.3.14 TDLS peer power save mode
			11.2.3.15 TDLS peer U-APSD (TPU)
				11.2.3.15.1 General
				11.2.3.15.2 TPU at the TPU buffer STA
				11.2.3.15.3 TPU at the TPU sleep STA
			11.2.3.16 FMS power management
				11.2.3.16.1 General
				11.2.3.16.2 FMS general procedures
				11.2.3.16.3 FMS Request procedures
				11.2.3.16.4 FMS Response procedures
			11.2.3.17 TIM Broadcast
			11.2.3.18 WNM sleep mode
				11.2.3.18.1 WNM sleep mode capability
				11.2.3.18.2 WNM sleep mode non-AP STA operation
				11.2.3.18.3 WNM sleep mode AP operation
			11.2.3.19 VHT TXOP power save
		11.2.4 Power management in an IBSS
			11.2.4.1 Introduction
			11.2.4.2 Basic approach
			11.2.4.3 Initialization of power management within an IBSS
			11.2.4.4 STA power state transitions
		11.2.5 Power management in an MBSS
		11.2.6 SM power save
		11.2.7 Power management in a PBSS and DMG infrastructure BSS
			11.2.7.1 General
			11.2.7.2 Non-AP and non-PCP STA power management mode
				11.2.7.2.1 General
				11.2.7.2.2 Non-AP and non-PCP STA operation without a wakeup schedule
				11.2.7.2.3 Non-AP and non-PCP STA operation with a wakeup schedule
				11.2.7.2.4 Non-AP and non-PCP STA operation with or without a wakeup schedule
			11.2.7.3 PCP power management mode
				11.2.7.3.1 General
				11.2.7.3.2 PCP operation without a wakeup schedule
				11.2.7.3.3 PCP operation with a wakeup schedule
			11.2.7.4 ATIM frame usage for power management of non-AP STAs
		11.2.8 ATIM frame and frame transmission in IBSS, DMG infrastructure BSS, and PBSS
	11.3 STA authentication and association
		11.3.1 State variables
		11.3.2 State transition diagram for nonmesh STAs
		11.3.3 Frame filtering based on STA state
		11.3.4 Authentication and deauthentication
			11.3.4.1 General
			11.3.4.2 Authentication—originating STA
			11.3.4.3 Authentication—destination STA
			11.3.4.4 Deauthentication—originating STA
			11.3.4.5 Deauthentication—destination STA
		11.3.5 Association, reassociation, and disassociation
			11.3.5.1 General
			11.3.5.2 Non-AP and non-PCP STA association initiation procedures
			11.3.5.3 AP or PCP association receipt procedures
			11.3.5.4 Non-AP and non-PCP STA reassociation initiation procedures
			11.3.5.5 AP or PCP reassociation receipt procedures
			11.3.5.6 Non-AP and non-PCP STA disassociation initiation procedures
			11.3.5.7 Non-AP and non-PCP STA disassociation receipt procedure
			11.3.5.8 AP or PCP disassociation initiation procedure
			11.3.5.9 AP or PCP disassociation receipt procedure
			11.3.5.10 PBSS procedures for nonassociated STAs
		11.3.6 Additional mechanisms for an AP collocated with a mesh STA
		11.3.7 Communicating PBSS information
		11.3.8 Neighbor report information upon rejection with suggested BSS transition
	11.4 TS operation
		11.4.1 Introduction
		11.4.2 TSPEC construction
		11.4.3 TS life cycle
		11.4.4 TS setup
			11.4.4.1 General
			11.4.4.2 Non-AP-STA-initiated TS setup
			11.4.4.3 AP-initiated TS setup
			11.4.4.4 TS setup procedures for both AP and non-AP STA initiation
			11.4.4.5 TS renegotiation
		11.4.5 TS setup by resource request during a fast BSS transition
		11.4.6 PSMP management
		11.4.7 Failed TS setup
		11.4.8 Data transfer
		11.4.9 TS deletion
			11.4.9.1 Deletion of a TS established between an HC, DMG AP, or PCP and a non-AP and non-PCP STA
			11.4.9.2 Peer-to-peer TS deletion and deletion of an allocation
		11.4.10 TS timeout
		11.4.11 TS suspension
		11.4.12 TS reinstatement
		11.4.13 DMG allocation formats
			11.4.13.1 General
			11.4.13.2 Isochronous allocations
			11.4.13.3 Asynchronous allocations
		11.4.14 PTP TS operation
	11.5 Block ack operation
		11.5.1 Introduction
		11.5.2 Setup and modification of the block ack parameters
			11.5.2.1 General
			11.5.2.2 Procedure at the originator
			11.5.2.3 Procedure at the recipient
			11.5.2.4 Procedure common to both originator and recipient
		11.5.3 Teardown of the block ack mechanism
			11.5.3.1 General
			11.5.3.2 Procedure at the initiator of the block ack teardown
			11.5.3.3 Procedure at the recipient of the DELBA frame
		11.5.4 Error recovery upon a peer failure
	11.6 Higher layer timer synchronization
		11.6.1 Introduction
		11.6.2 Procedure at the STA
	11.7 DLS operation
		11.7.1 General
		11.7.2 DLS procedures
			11.7.2.1 General
			11.7.2.2 Setup procedure at the QoS STA
			11.7.2.3 Setup procedure at the AP
			11.7.2.4 Operation of the DLS Timeout Value field
		11.7.3 Data transfer after setup
		11.7.4 DLS teardown
			11.7.4.1 General
			11.7.4.2 STA-initiated DLS teardown procedure
			11.7.4.3 Teardown procedure at the AP
			11.7.4.4 AP-initiated DLS teardown procedure
		11.7.5 Error recovery upon a peer failure
		11.7.6 Secure DLS operation
	11.8 TPC procedures
		11.8.1 General
		11.8.2 Association based on transmit power capability
		11.8.3 Peering based on transmit power capability
		11.8.4 Interpretation of transmit power capability
		11.8.5 Specification of regulatory and local maximum transmit power levels
		11.8.6 Transmit power selection
		11.8.7 Transmit power adaptation
	11.9 DFS procedures
		11.9.1 General
		11.9.2 Association based on supported channels
			11.9.2.1 Association based on supported channels in a non-DMG BSS
			11.9.2.2 Providing supported channels upon association in a DMG BSS
		11.9.3 Quieting channels for testing
		11.9.4 Testing channels for radar
		11.9.5 Discontinuing operations after detecting radar
		11.9.6 Detecting radar
		11.9.7 Requesting and reporting of measurements
		11.9.8 Selecting and advertising a new channel
			11.9.8.1 General
			11.9.8.2 Selecting and advertising a new channel in a non-DMG infrastructure BSS
			11.9.8.3 Selecting and advertising a new channel in an IBSS
			11.9.8.4 MBSS channel switching
				11.9.8.4.1 General
				11.9.8.4.2 Initiating MBSS channel switch
				11.9.8.4.3 Processing channel switch announcement
				11.9.8.4.4 Channel switch across an operating class
			11.9.8.5 HT-greenfield transmissions in operating classes that include a behavior limit of DFS_50_100_Behavior
			11.9.8.6 Selecting and advertising a new channel in a DMG BSS
		11.9.9 Channel Switch Announcement element operation
		11.9.10 Future Channel Guidance operation
	11.10 Extended channel switching (ECS)
		11.10.1 General
		11.10.2 Advertising supported operating classes
		11.10.3 Selecting and advertising a new channel and/or operating class
			11.10.3.1 General
			11.10.3.2 Selecting and advertising a new channel in an infrastructure BSS
			11.10.3.3 Selecting and advertising a new channel in an IBSS
			11.10.3.4 Selecting and advertising a new channel in an MBSS
	11.11 Radio measurement procedures
		11.11.1 General
		11.11.2 Measurement on operating and nonoperating channels
		11.11.3 Measurement start time
		11.11.4 Measurement Duration
		11.11.5 Station responsibility for conducting measurements
		11.11.6 Requesting and reporting of measurements
		11.11.7 Repeated Measurement Request frames
		11.11.8 Triggered autonomous reporting
		11.11.9 Specific measurement usage
			11.11.9.1 Beacon report
			11.11.9.2 Frame report
			11.11.9.3 Channel load report
			11.11.9.4 Noise Histogram report
			11.11.9.5 STA Statistics report
			11.11.9.6 LCI report (Location configuration information report)
			11.11.9.7 Measurement Pause
			11.11.9.8 Transmit Stream/Category Measurement report
			11.11.9.9 Location Civic report
			11.11.9.10 Location Identifier report
			11.11.9.11 Fine Timing Measurement Range report
		11.11.10 Usage of the neighbor report
			11.11.10.1 General
			11.11.10.2 Requesting a neighbor report
			11.11.10.3 Responding to a neighbor report request
		11.11.11 Link Measurement
		11.11.12 Measurement of the RPI histogram
		11.11.13 Operation of the Max Transmit Power field
		11.11.14 Multiple BSSID set
		11.11.15 Measurement Pilot frame generation and usage
			11.11.15.1 General
			11.11.15.2 Measurement Pilot frame generation by an AP
			11.11.15.3 Measurement pilot usage by a STA
		11.11.16 Access Delay Measurement
		11.11.17 BSS Available Admission Capacity
		11.11.18 AP Channel Report
		11.11.19 Multicast diagnostic reporting
		11.11.20 CCA request and report
		11.11.21 RPI Histogram request and report
	11.12 DSE procedures
		11.12.1 General
		11.12.2 Enablement and deenablement
			11.12.2.1 General
			11.12.2.2 Enablement requester STA
			11.12.2.3 Enablement responder STA
			11.12.2.4 Deenablement requester STA
			11.12.2.5 Deenablement responder STA
		11.12.3 Registered STA operation
		11.12.4 Enabling STA operation with DSE
		11.12.5 Dependent STA operation with DSE
	11.13 Group addressed robust management frame procedures
	11.14 SA Query procedures
	11.15 HT BSS Operation
	11.16 20/40 MHz BSS operation
		11.16.1 Rules for operation in 20/40 MHz BSS
		11.16.2 Basic 20/40 MHz BSS functionality
		11.16.3 Channel scanning and selection methods for 20/40 MHz operation
			11.16.3.1 General
			11.16.3.2 Scanning requirements for a 20/40 MHz BSS
			11.16.3.3 Channel management at the AP and in an IBSS
		11.16.4 40 MHz PPDU transmission restrictions
			11.16.4.1 Fields used to determine 40 MHz PPDU transmission restrictions
			11.16.4.2 Infrastructure non-AP STA restrictions
			11.16.4.3 AP restrictions
			11.16.4.4 Restrictions on non-AP STAs that are not infrastructure BSS members
		11.16.5 Scanning requirements for 40-MHz-capable STA
		11.16.6 Exemption from OBSS scanning
		11.16.7 Communicating 20/40 BSS coexistence information
		11.16.8 Support of DSSS/CCK in 40 MHz
		11.16.9 STA CCA sensing in a 20/40 MHz BSS
		11.16.10 NAV assertion in 20/40 MHz BSS
		11.16.11 Signaling 40 MHz intolerance
		11.16.12 Switching between 40 MHz and 20 MHz
	11.17 Phased coexistence operation (PCO)
		11.17.1 General description of PCO
		11.17.2 Operation at a PCO active AP
		11.17.3 Operation at a PCO active non-AP STA
	11.18 20/40 BSS Coexistence Management frame usage
	11.19 RSNA A-MSDU procedures
	11.20 Public Action frame addressing
	11.21 STAs communicating Data frames outside the context of a BSS
	11.22 Timing Advertisement
		11.22.1 Introduction
		11.22.2 Timing advertisement frame procedures
		11.22.3 UTC TSF Offset procedures
	11.23 Tunneled direct-link setup
		11.23.1 General
		11.23.2 TDLS payload
		11.23.3 TDLS Discovery
		11.23.4 TDLS direct-link establishment
		11.23.5 TDLS direct-link teardown
		11.23.6 TDLS channel switching
			11.23.6.1 General
			11.23.6.2 General behavior on the off-channel
			11.23.6.3 Setting up a 40 MHz direct link
				11.23.6.3.1 General
				11.23.6.3.2 Basic 40 MHz functionality
				11.23.6.3.3 Channel selection for a 40 MHz direct link
				11.23.6.3.4 Switching from a 40 MHz to a 20 MHz direct link
				11.23.6.3.5 CCA sensing and NAV assertion in a 40 MHz direct link
			11.23.6.4 TDLS channel switching and power saving
			11.23.6.5 Setting up a wide bandwidth off-channel direct link
				11.23.6.5.1 General
				11.23.6.5.2 Basic wideband functionality
				11.23.6.5.3 Channel selection for a wideband off-channel direct link
				11.23.6.5.4 Switching from a wideband to a 20 MHz direct link
				11.23.6.5.5 CCA sensing and NAV assertion in a 20 MHz, 40 MHz, 80 MHz, 160 MHz, or 80+80 MHz direct link
	11.24 Wireless network management procedures
		11.24.1 Wireless network management dependencies
		11.24.2 Event request and report procedures
			11.24.2.1 Event request and event report
			11.24.2.2 Transition event request and report
			11.24.2.3 RSNA event request and report
			11.24.2.4 Peer-to-peer link event request and report
			11.24.2.5 WNM log event request and report
			11.24.2.6 Vendor Specific event request and report
		11.24.3 Diagnostic request and report procedures
			11.24.3.1 Diagnostic request and diagnostic report
			11.24.3.2 Configuration Profile report
			11.24.3.3 Manufacturer information STA report
			11.24.3.4 Association diagnostic
			11.24.3.5 IEEE 802.1X authentication diagnostic
		11.24.4 Location track procedures
			11.24.4.1 Location track configuration procedures
			11.24.4.2 Location track notification procedures
		11.24.5 Timing measurement procedure
		11.24.6 Fine timing measurement (FTM) procedure
			11.24.6.1 Overview
			11.24.6.2 FTM capabilities
			11.24.6.3 Fine timing measurement procedure negotiation
			11.24.6.4 Measurement exchange
			11.24.6.5 Fine timing measurement parameter modification
			11.24.6.6 Fine timing measurement termination
			11.24.6.7 LCI and Location Civic retrieval using FTM procedure
		11.24.7 BSS transition management for network load balancing
			11.24.7.1 BSS transition capability
			11.24.7.2 BSS transition management query
			11.24.7.3 BSS transition management request
			11.24.7.4 BSS transition management response
		11.24.8 FMS multicast rate processing
		11.24.9 Collocated interference reporting
		11.24.10 QoS Traffic capability procedure
		11.24.11 AC Station Count
		11.24.12 TFS procedures
			11.24.12.1 TFS capability
			11.24.12.2 TFS non-AP STA operation
			11.24.12.3 TFS AP operation
		11.24.13 BSS max idle period management
		11.24.14 Proxy ARP (including Proxy Neighbor Discovery) service
		11.24.15 Channel usage procedures
		11.24.16 Group addressed transmission service
			11.24.16.1 General
			11.24.16.2 DMS procedures
			11.24.16.3 GCR procedures
				11.24.16.3.1 Overview
				11.24.16.3.2 GCR group membership procedures
				11.24.16.3.3 GCR setup procedures
				11.24.16.3.4 GCR frame exchange procedures
				11.24.16.3.5 Concealment of GCR transmissions
				11.24.16.3.6 GCR unsolicited retry
				11.24.16.3.7 GCR block ack
				11.24.16.3.8 GCR-SP
		11.24.17 WNM notification
	11.25 WLAN interworking with external networks procedures
		11.25.1 General
		11.25.2 Interworking capabilities and information
		11.25.3 Interworking procedures: generic advertisement service (GAS)
			11.25.3.1 Introduction
			11.25.3.2 GAS Protocol
				11.25.3.2.1 General
				11.25.3.2.2 STA procedures to transmit a GAS Query
				11.25.3.2.3 STA procedures to post a GAS Query to an Advertisement Server
				11.25.3.2.4 STA procedures for transmitting the GAS Query Response
				11.25.3.2.5 GAS procedures interaction with multiple BSSID set
			11.25.3.3 ANQP procedures
				11.25.3.3.1 General
				11.25.3.3.2 Query list procedure
				11.25.3.3.3 Roaming Consortium procedure
				11.25.3.3.4 AP procedure for advertising EAP Method associated with an NAI Realm
				11.25.3.3.5 3GPP Cellular Network procedure
				11.25.3.3.6 AP Geospatial Location procedure
				11.25.3.3.7 AP Civic Location procedure
				11.25.3.3.8 AP Location Public Identifier URI/FQDN procedures
				11.25.3.3.9 Emergency NAI procedure
				11.25.3.3.10 TDLS Capability procedure
				11.25.3.3.11 Venue URL procedure
				11.25.3.3.12 Advice of Charge procedure
				11.25.3.3.13 Local Content procedure
			11.25.3.4 Registered location query protocol (RLQP) procedures
		11.25.4 Interworking procedures: IEEE 802.21 MIH support
		11.25.5 Interworking procedures: interactions with SSPN
			11.25.5.1 General operation
			11.25.5.2 Authentication and cipher suites selection with SSPN
			11.25.5.3 Reporting and session control with SSPN
		11.25.6 Interworking procedures: emergency services support
		11.25.7 Interworking procedures: emergency alert system (EAS) support
		11.25.8 Interworking procedures: support for the advertisement of roaming consortiums
		11.25.9 Interworking procedures: support for QoS mapping from external networks
	11.26 Quality-of-service management frame (QMF)
		11.26.1 General
			11.26.1.1 Overview
			11.26.1.2 Default QMF policy
		11.26.2 QMF policy advertisement and configuration procedures
			11.26.2.1 Overview
			11.26.2.2 QMF policy change in an infrastructure BSS or in an MBSS
			11.26.2.3 QMF policy configuration in an infrastructure BSS
			11.26.2.4 QMF policy configuration in an IBSS or OCB
			11.26.2.5 QMF policy configuration in an MBSS
		11.26.3 Interpreting QMF access categories
	11.27 Robust AV streaming
		11.27.1 Robust AV streaming dependencies
		11.27.2 SCS procedures
	11.28 Procedures to manage OBSS
		11.28.1 General
		11.28.2 QLoad Report element
			11.28.2.1 Introduction
			11.28.2.2 Calculating field values
			11.28.2.3 Requesting QLoad Reports using radio measurement requests
		11.28.3 HCCA TXOP negotiation
		11.28.4 HCCA AP timing synchronization for HCCA TXOP advertisement
			11.28.4.1 General
			11.28.4.2 Timing offset
			11.28.4.3 Clock drift adjustment
	11.29 DMG beamformed link and BSS maintenance
		11.29.1 Beamformed link maintenance
		11.29.2 PCP Handover
			11.29.2.1 General
			11.29.2.2 Explicit handover procedure
			11.29.2.3 Implicit handover procedure
	11.30 DMG BSS peer and service discovery
		11.30.1 Information Request and Response
		11.30.2 Peer Service Discovery
	11.31 Changing DMG BSS parameters
		11.31.1 General
		11.31.2 Moving the TBTT
		11.31.3 Changing beacon interval duration
		11.31.4 Maintaining synchronization in an AP or PCP cluster
		11.31.5 Recommending DMG BSS parameters to the AP or PCP
	11.32 Spatial sharing and interference mitigation for DMG STAs
		11.32.1 General
		11.32.2 Spatial sharing and interference assessment
		11.32.3 Achieving spatial sharing and interference mitigation
		11.32.4 PBSS and infrastructure BSS stability in OBSS scenarios
	11.33 Multi-band operation
		11.33.1 General
		11.33.2 FST setup protocol
			11.33.2.1 General
			11.33.2.2 Transitioning between states
			11.33.2.3 FST TS switching
		11.33.3 FST teardown
		11.33.4 On-channel Tunneling (OCT) operation
		11.33.5 FST payload
	11.34 MMSL cluster operation
		11.34.1 Introduction
		11.34.2 MMSL cluster setup
			11.34.2.1 General
			11.34.2.2 MMSL cluster setup of non-AP and non-PCP MM-SME coordinated STA with AP or PCP
			11.34.2.3 MMSL cluster setup of non-AP and non-PCP STA with another non-AP and non- PCP STA
	11.35 DMG coexistence with non-IEEE-802.11 systems
	11.36 DMG relay procedures
		11.36.1 General
		11.36.2 Common relay setup procedures
			11.36.2.1 Introduction
			11.36.2.2 Relay capabilities and RDS discovery procedures
			11.36.2.3 RDS selection procedure
			11.36.2.4 RLS procedure
		11.36.3 Relay operation-type change procedure
		11.36.4 Relay teardown
	11.37 Quieting adjacent DMG BSSs
		11.37.1 General
		11.37.2 Procedure at the requester AP
		11.37.3 Procedure at the responder AP
	11.38 DMG beamforming
	11.39 DMG MAC sublayer attributes
	11.40 VHT BSS operation
		11.40.1 Basic VHT BSS functionality
		11.40.2 Channel selection methods for a VHT BSS
		11.40.3 Scanning requirements for VHT STA
		11.40.4 Channel switching methods for a VHT BSS
		11.40.5 NAV assertion in a VHT BSS
		11.40.6 VHT STA antenna indication
		11.40.7 Basic VHT-MCS and NSS set operation
		11.40.8 Extended NSS BW Support Signaling
	11.41 Group ID management operation
	11.42 Notification of operating mode changes
	11.43 Basic TVHT BSS functionality
	11.44 Operation under the control of a GDB
		11.44.1 General
		11.44.2 GDD enabling STA operation
		11.44.3 GDD dependent STA operation
		11.44.4 Channel availability query (CAQ) procedure
			11.44.4.1 Introduction
			11.44.4.2 CAQ requesting STA
			11.44.4.3 CAQ responding STA
		11.44.5 Channel schedule management (CSM) procedures
			11.44.5.1 Introduction
			11.44.5.2 CSM requesting STA
			11.44.5.3 CSM responding STA
		11.44.6 Contact verification signal (CVS)
		11.44.7 Network channel control (NCC) procedures
			11.44.7.1 Introduction
			11.44.7.2 NCC requesting STA
			11.44.7.3 NCC responding STA
		11.44.8 Reduced neighbor report
		11.44.9 White space map (WSM)
	11.45 Beacon RSSI
	11.46 Estimated throughput
12. Security
	12.1 Conventions
	12.2 Framework
		12.2.1 Classes of security algorithm
		12.2.2 Security methods
		12.2.3 RSNA STA capabilities
		12.2.4 RSNA establishment
		12.2.5 RSNA PeerKey Support
		12.2.6 RSNA assumptions and constraints
		12.2.7 Requirements for the Protected Frame field
		12.2.8 Requirements for robust management frame protection
		12.2.9 Emergency service establishment in an RSN
	12.3 Pre-RSNA security methods
		12.3.1 Status of Pre-RSNA security methods
		12.3.2 Wired equivalent privacy (WEP)
			12.3.2.1 WEP overview
			12.3.2.2 WEP MPDU format
			12.3.2.3 WEP state
			12.3.2.4 WEP procedures
				12.3.2.4.1 WEP ICV algorithm
				12.3.2.4.2 WEP encryption algorithm
				12.3.2.4.3 WEP seed construction
				12.3.2.4.4 WEP MPDU cryptographic encapsulation
				12.3.2.4.5 WEP MPDU decapsulation
		12.3.3 Pre-RSNA authentication
			12.3.3.1 Overview
			12.3.3.2 Open System authentication
				12.3.3.2.1 General
				12.3.3.2.2 Open System authentication (first frame)
				12.3.3.2.3 Open System authentication (final frame)
			12.3.3.3 Shared Key authentication
				12.3.3.3.1 General
				12.3.3.3.2 Shared Key authentication (first frame)
				12.3.3.3.3 Shared Key authentication (second frame)
				12.3.3.3.4 Shared Key authentication (third frame)
				12.3.3.3.5 Shared Key authentication (final frame)
				12.3.3.3.6 Shared key MIB attributes
	12.4 Authentication using a password
		12.4.1 SAE overview
		12.4.2 Assumptions on SAE
		12.4.3 Representation of a password
		12.4.4 Finite cyclic groups
			12.4.4.1 General
			12.4.4.2 Elliptic curve cryptography (ECC) groups
				12.4.4.2.1 ECC group definition
				12.4.4.2.2 Generation of the password element with ECC groups
			12.4.4.3 Finite field cryptography (FFC) groups
				12.4.4.3.1 FFC group definition
				12.4.4.3.2 Generation of the password element with FFC groups
		12.4.5 SAE protocol
			12.4.5.1 Message exchanges
			12.4.5.2 PWE and secret generation
			12.4.5.3 Construction of an SAE Commit message
			12.4.5.4 Processing of a peer’s SAE Commit message
			12.4.5.5 Construction of an SAE Confirm message
			12.4.5.6 Processing of a peer’s SAE Confirm message
		12.4.6 Anti-clogging tokens
		12.4.7 Framing of SAE
			12.4.7.1 General
			12.4.7.2 Data type conversion
				12.4.7.2.1 General
				12.4.7.2.2 Integer to octet string conversion
				12.4.7.2.3 Octet string to integer conversion
				12.4.7.2.4 Element to octet string conversion
				12.4.7.2.5 Octet string to element conversion
			12.4.7.3 Authentication transaction sequence number for SAE
			12.4.7.4 Encoding and decoding of SAE Commit messages
			12.4.7.5 Encoding and decoding of SAE Confirm messages
			12.4.7.6 Status codes
		12.4.8 SAE finite state machine
			12.4.8.1 General
			12.4.8.2 States
				12.4.8.2.1 Parent process states
				12.4.8.2.2 Protocol instance states
			12.4.8.3 Events and output
				12.4.8.3.1 Parent process events and output
				12.4.8.3.2 Protocol instance events and output
			12.4.8.4 Timers
			12.4.8.5 Variables
				12.4.8.5.1 Parent process variables
				12.4.8.5.2 Protocol instance variables
			12.4.8.6 Behavior of state machine
				12.4.8.6.1 Parent process behavior
				12.4.8.6.2 Protocol instance behavior—General
				12.4.8.6.3 Protocol instance behavior - Nothing state
				12.4.8.6.4 Protocol instance behavior - Committed state
				12.4.8.6.5 Protocol instance behavior - Confirmed state
				12.4.8.6.6 Protocol instance behavior - Accepted state
	12.5 RSNA confidentiality and integrity protocols
		12.5.1 Overview
		12.5.2 Temporal key integrity protocol (TKIP)
			12.5.2.1 TKIP overview
				12.5.2.1.1 General
				12.5.2.1.2 TKIP cryptographic encapsulation
				12.5.2.1.3 TKIP decapsulation
			12.5.2.2 TKIP MPDU formats
			12.5.2.3 TKIP MIC
				12.5.2.3.1 General
				12.5.2.3.2 Motivation for the TKIP MIC
				12.5.2.3.3 Definition of the TKIP MIC
			12.5.2.4 TKIP countermeasures procedures
				12.5.2.4.1 General
				12.5.2.4.2 TKIP countermeasures for an Authenticator
				12.5.2.4.3 TKIP countermeasures for a Supplicant
			12.5.2.5 TKIP mixing function
				12.5.2.5.1 General
				12.5.2.5.2 S-Box
				12.5.2.5.3 Phase 1 Definition
				12.5.2.5.4 Phase 2 definition
			12.5.2.6 TKIP replay protection procedures
		12.5.3 CTR with CBC-MAC protocol (CCMP)
			12.5.3.1 General
			12.5.3.2 CCMP MPDU format
			12.5.3.3 CCMP cryptographic encapsulation
				12.5.3.3.1 General
				12.5.3.3.2 PN processing
				12.5.3.3.3 Construct AAD
				12.5.3.3.4 Construct CCM nonce
				12.5.3.3.5 Construct CCMP header
				12.5.3.3.6 CCM originator processing
			12.5.3.4 CCMP decapsulation
				12.5.3.4.1 General
				12.5.3.4.2 CCM recipient processing
				12.5.3.4.3 Decrypted CCMP MPDU
				12.5.3.4.4 PN and replay detection
		12.5.4 Broadcast/multicast integrity protocol (BIP)
			12.5.4.1 BIP overview
			12.5.4.2 BIP MMPDU format
			12.5.4.3 BIP AAD construction
			12.5.4.4 BIP replay protection
			12.5.4.5 BIP transmission
			12.5.4.6 BIP reception
		12.5.5 GCM protocol (GCMP)
			12.5.5.1 GCMP overview
			12.5.5.2 GCMP MPDU format
			12.5.5.3 GCMP cryptographic encapsulation
				12.5.5.3.1 General
				12.5.5.3.2 PN processing
				12.5.5.3.3 Construct AAD
				12.5.5.3.4 Construct GCM nonce
				12.5.5.3.5 Construct GCMP header
				12.5.5.3.6 GCM originator processing
			12.5.5.4 GCMP decapsulation
				12.5.5.4.1 General
				12.5.5.4.2 GCM recipient processing
				12.5.5.4.3 Decrypted GCMP MPDU
				12.5.5.4.4 PN and replay detection
	12.6 RSNA security association management
		12.6.1 Security associations
			12.6.1.1 Security association definitions
				12.6.1.1.1 General
				12.6.1.1.2 PMKSA
				12.6.1.1.3 PMK-R0 security association
				12.6.1.1.4 PMK-R1 security association
				12.6.1.1.5 Mesh PMKSA
				12.6.1.1.6 PTKSA
				12.6.1.1.7 Mesh TKSA
				12.6.1.1.8 GTKSA
				12.6.1.1.9 IGTKSA
				12.6.1.1.10 Mesh GTKSA
				12.6.1.1.11 SMKSA
				12.6.1.1.12 STKSA
			12.6.1.2 TPKSA
			12.6.1.3 Security association life cycle
				12.6.1.3.1 General
				12.6.1.3.2 Security association in an ESS
				12.6.1.3.3 Security association in an IBSS
				12.6.1.3.4 Security association in an MBSS
				12.6.1.3.5 Security association in a PBSS
		12.6.2 RSNA selection
		12.6.3 RSNA policy selection in an infrastructure BSS
		12.6.4 TSN policy selection in an infrastructure BSS
		12.6.5 RSNA policy selection in an IBSS and for DLS
		12.6.6 TSN policy selection in an IBSS
		12.6.7 RSNA policy selection in an MBSS
		12.6.8 RSNA policy selection in a PBSS
		12.6.9 RSN management of the IEEE 802.1X Controlled Port
		12.6.10 RSNA authentication in an infrastructure BSS
			12.6.10.1 General
			12.6.10.2 Preauthentication and RSNA key management
			12.6.10.3 Cached PMKSAs and RSNA key management
		12.6.11 RSNA authentication in an IBSS
		12.6.12 RSNA authentication in an MBSS
		12.6.13 RSNA authentication in a PBSS
		12.6.14 RSNA key management in an infrastructure BSS
		12.6.15 RSNA key management in an IBSS
		12.6.16 RSNA key management in an MBSS
		12.6.17 RSNA key management in a PBSS
		12.6.18 RSNA security association termination
		12.6.19 Protection of robust Management frames
		12.6.20 Robust management frame selection procedure
		12.6.21 RSNA rekeying
		12.6.22 Multi-band RSNA
			12.6.22.1 General
			12.6.22.2 Nontransparent multi-band RSNA
			12.6.22.3 Transparent multi-band RSNA
			12.6.22.4 Multi-band RSNA with TDLS in a non-DMG BSS
	12.7 Keys and key distribution
		12.7.1 Key hierarchy
			12.7.1.1 General
			12.7.1.2 PRF
			12.7.1.3 Pairwise key hierarchy
			12.7.1.4 Group key hierarchy
			12.7.1.5 Integrity group key hierarchy
			12.7.1.6 PeerKey key hierarchy
			12.7.1.7 FT key hierarchy
				12.7.1.7.1 Overview
				12.7.1.7.2 Key derivation function (KDF)
				12.7.1.7.3 PMK-R0
				12.7.1.7.4 PMK-R1
				12.7.1.7.5 PTK
		12.7.2 EAPOL-Key frames
		12.7.3 EAPOL-Key frame construction and processing
		12.7.4 EAPOL-Key frame notation
		12.7.5 Nonce generation
		12.7.6 4-way handshake
			12.7.6.1 General
			12.7.6.2 4-way handshake message 1
			12.7.6.3 4-way handshake message 2
			12.7.6.4 4-way handshake message 3
			12.7.6.5 4-way handshake message 4
			12.7.6.6 4-way handshake implementation considerations
			12.7.6.7 Sample 4-way handshake
			12.7.6.8 4-way handshake analysis
		12.7.7 Group key handshake
			12.7.7.1 General
			12.7.7.2 Group key handshake message 1
			12.7.7.3 Group key handshake message 2
			12.7.7.4 Group key handshake implementation considerations
			12.7.7.5 Sample group key handshake
		12.7.8 PeerKey handshake
			12.7.8.1 General
			12.7.8.2 SMK handshake
				12.7.8.2.1 General
				12.7.8.2.2 SMK handshake message 1
				12.7.8.2.3 SMK handshake message 2
				12.7.8.2.4 SMK handshake message 3
				12.7.8.2.5 SMK handshake message 4
				12.7.8.2.6 SMK handshake message 5
			12.7.8.3 PeerKey setup and handshake error conditions
			12.7.8.4 STKSA rekeying
			12.7.8.5 Error reporting
				12.7.8.5.1 General
				12.7.8.5.2 Error ERR_STA_NR
				12.7.8.5.3 Error ERR_STA_NRSN
				12.7.8.5.4 Error ERR_CPHR_NS
				12.7.8.5.5 Error ERR_NO_STSL
		12.7.9 TDLS PeerKey (TPK) security protocol
			12.7.9.1 General
			12.7.9.2 TPK handshake
			12.7.9.3 TPK handshake security assumptions
			12.7.9.4 TPK Security Protocol handshake messages
				12.7.9.4.1 Overview
				12.7.9.4.2 TPK handshake message 1
				12.7.9.4.3 TPK handshake message 2
				12.7.9.4.4 TPK handshake message 3
			12.7.9.5 Supplicant state machine procedures
			12.7.9.6 Supplicant PeerKey state machine states
			12.7.9.7 Supplicant PeerKey state machine variables
		12.7.10 RSNA Supplicant key management state machine
			12.7.10.1 General
			12.7.10.2 Supplicant state machine states
			12.7.10.3 Supplicant state machine variables
		12.7.11 RSNA Authenticator key management state machine
			12.7.11.1 General
			12.7.11.2 Authenticator state machine states
				12.7.11.2.1 Authenticator state machine: 4-way handshake (per STA)
				12.7.11.2.2 Authenticator state machine: group key handshake (per STA)
				12.7.11.2.3 Authenticator state machine: group key handshake (global)
			12.7.11.3 Authenticator state machine variables
			12.7.11.4 Authenticator state machine procedures
	12.8 Mapping EAPOL keys to IEEE 802.11 keys
		12.8.1 Mapping PTK to TKIP keys
		12.8.2 Mapping GTK to TKIP keys
		12.8.3 Mapping PTK to CCMP keys
		12.8.4 Mapping GTK to CCMP keys
		12.8.5 Mapping GTK to WEP-40 keys
		12.8.6 Mapping GTK to WEP-104 keys
		12.8.7 Mapping IGTK to BIP keys
		12.8.8 Mapping PTK to GCMP keys
		12.8.9 Mapping GTK to GCMP keys
	12.9 Per-frame pseudocode
		12.9.1 WEP frame pseudocode
		12.9.2 RSNA frame pseudocode
			12.9.2.1 General
			12.9.2.2 Per-MSDU/Per-A-MSDU Tx pseudocode
			12.9.2.3 Per-MMPDU Tx pseudocode
			12.9.2.4 Per-MPDU Tx pseudocode
			12.9.2.5 Per-MPDU Tx pseudocode for MMPDU
			12.9.2.6 Per-MPDU Rx pseudocode
			12.9.2.7 Per-MPDU Rx pseudocode for an MMPDU
			12.9.2.8 Per-MSDU/Per-A-MSDU Rx pseudocode
			12.9.2.9 Per-MMPDU Rx pseudocode
	12.10 Authenticated mesh peering exchange (AMPE)
	12.11 AP PeerKey support
		12.11.1 AP PeerKey overview
		12.11.2 AP PeerKey protocol
13. Fast BSS transition
	13.1 Overview
	13.2 Key holders
		13.2.1 Introduction
		13.2.2 Authenticator key holders
		13.2.3 Supplicant key holders
	13.3 Capability and policy advertisement
	13.4 FT initial mobility domain association
		13.4.1 Overview
		13.4.2 FT initial mobility domain association in an RSN
		13.4.3 FT initial mobility domain association in a non-RSN
	13.5 FT protocol
		13.5.1 Overview
		13.5.2 Over-the-air FT protocol authentication in an RSN
		13.5.3 Over-the-DS FT protocol in an RSN
		13.5.4 Over-the-air FT protocol in a non-RSN
		13.5.5 Over-the-DS FT protocol in a non-RSN
	13.6 FT resource request protocol
		13.6.1 Overview
		13.6.2 Over-the-air fast BSS transition with resource request
		13.6.3 Over-the-DS fast BSS transition with resource request
	13.7 FT reassociation
		13.7.1 FT reassociation in an RSN
		13.7.2 FT reassociation in a non-RSN
	13.8 FT authentication sequence
		13.8.1 Overview
		13.8.2 FT authentication sequence: contents of first message
		13.8.3 FT authentication sequence: contents of second message
		13.8.4 FT authentication sequence: contents of third message
		13.8.5 FT authentication sequence: contents of fourth message
	13.9 FT security architecture state machines
		13.9.1 Introduction
		13.9.2 R0KH state machine
			13.9.2.1 General
			13.9.2.2 R0KH state machine states
			13.9.2.3 R0KH state machine variables
			13.9.2.4 R0KH state machine procedures
		13.9.3 R1KH state machine
			13.9.3.1 General
			13.9.3.2 R1KH state machine states
			13.9.3.3 R1KH state machine variables
			13.9.3.4 R1KH state machine procedures
		13.9.4 S0KH state machine
			13.9.4.1 General
			13.9.4.2 S0KH state machine states
			13.9.4.3 S0KH state machine variables
			13.9.4.4 S0KH state machine procedures
		13.9.5 S1KH state machine
			13.9.5.1 General
			13.9.5.2 S1KH state machine states
			13.9.5.3 S1KH state machine variables
			13.9.5.4 S1KH state machine procedures
	13.10 Remote request broker (RRB) communication
		13.10.1 Overview
		13.10.2 Remote request broker (RRB)
		13.10.3 Remote Request/Response frame definition
	13.11 Resource request procedures
		13.11.1 General
		13.11.2 Resource information container (RIC)
		13.11.3 Creation and handling of a resource request
			13.11.3.1 FTO procedures
			13.11.3.2 AP procedures
14. MLME mesh procedures
	14.1 Mesh STA dependencies
	14.2 Mesh discovery
		14.2.1 General
		14.2.2 Mesh identifier
		14.2.3 Mesh profile
		14.2.4 Mesh STA configuration
		14.2.5 Supplemental information for the mesh discovery
		14.2.6 Scanning mesh BSSs
		14.2.7 Candidate peer mesh STA
		14.2.8 Establishing or becoming a member of a mesh BSS
		14.2.9 Establishing mesh peerings
	14.3 Mesh peering management (MPM)
		14.3.1 General
		14.3.2 State variable management
		14.3.3 Mesh authentication
		14.3.4 Mesh peering instance controller
			14.3.4.1 Overview
			14.3.4.2 Creating a new mesh peering instance
			14.3.4.3 Deleting mesh peering instances
		14.3.5 Mesh peering instance selection
		14.3.6 Mesh peering open
			14.3.6.1 Generating Mesh Peering Open frames
			14.3.6.2 Mesh Peering Open frame processing
		14.3.7 Mesh peering confirm
			14.3.7.1 Generating Mesh Peering Confirm frames
			14.3.7.2 Mesh Peering Confirm frame processing
		14.3.8 Mesh peering close
			14.3.8.1 Generating Mesh Peering Close frames
			14.3.8.2 Mesh Peering Close frame processing
	14.4 Mesh peering management finite state machine (MPM FSM)
		14.4.1 General
		14.4.2 States
		14.4.3 Events and actions
		14.4.4 Timers
		14.4.5 State transitions
		14.4.6 IDLE state
		14.4.7 OPN_SNT state
		14.4.8 CNF_RCVD state
		14.4.9 OPN_RCVD state
		14.4.10 ESTAB state
		14.4.11 HOLDING state
	14.5 Authenticated mesh peering exchange (AMPE)
		14.5.1 Overview
		14.5.2 Security capabilities selection
			14.5.2.1 Instance Pairwise Cipher Suite selection
			14.5.2.2 Group cipher suite selection
		14.5.3 Construction and processing AES-SIV-protected mesh peering Management frames
		14.5.4 Distribution of group transient keys in an MBSS
		14.5.5 Mesh peering Management frames for AMPE
			14.5.5.1 General
			14.5.5.2 Mesh peering open for AMPE
				14.5.5.2.1 Generating Mesh Peering Open frames for AMPE
				14.5.5.2.2 Processing Mesh Peering Open frames for AMPE
			14.5.5.3 Mesh peering confirm for AMPE
				14.5.5.3.1 Generating Mesh Peering Confirm frames for AMPE
				14.5.5.3.2 Processing Mesh Peering Confirm frames for AMPE
			14.5.5.4 Mesh peering close for AMPE
				14.5.5.4.1 Generating Mesh Peering Close frames for AMPE
				14.5.5.4.2 Processing Mesh Peering Close frames for AMPE
		14.5.6 AMPE finite state machine
			14.5.6.1 Overview
			14.5.6.2 Additional events and actions to MPM FSM
			14.5.6.3 State transitions
		14.5.7 Keys and key derivation algorithm for the authenticated mesh peering exchange (AMPE)
	14.6 Mesh group key handshake
		14.6.1 General
		14.6.2 Protection on mesh group key handshake frames
		14.6.3 Mesh Group Key Inform frame construction and processing
		14.6.4 Mesh Group Key Acknowledge frame construction and processing
		14.6.5 Mesh group key implementation considerations
	14.7 Mesh security
	14.8 Mesh path selection and metric framework
		14.8.1 General
		14.8.2 Extensible path selection framework
		14.8.3 Link metric reporting
	14.9 Airtime link metric
	14.10 Hybrid wireless mesh protocol (HWMP)
		14.10.1 General
		14.10.2 Terminology
		14.10.3 On-demand path selection mode
		14.10.4 Proactive tree building mode
			14.10.4.1 General
			14.10.4.2 Proactive PREQ mechanism
			14.10.4.3 Proactive RANN mechanism
		14.10.5 Collocated STAs
		14.10.6 Parameters for extensible path selection framework
		14.10.7 Addressing of HWMP Mesh Path Selection frame
		14.10.8 General rules for processing HWMP elements
			14.10.8.1 General
			14.10.8.2 HWMP propagation
			14.10.8.3 HWMP sequence numbering
			14.10.8.4 Forwarding information
			14.10.8.5 Repeated attempts at path discovery
			14.10.8.6 Limiting the rate of HWMP SN increments
		14.10.9 Path request (PREQ) mechanism
			14.10.9.1 General
			14.10.9.2 Function
			14.10.9.3 Conditions for generating and sending a PREQ element
			14.10.9.4 PREQ element processing
				14.10.9.4.1 General
				14.10.9.4.2 Acceptance criteria
				14.10.9.4.3 Effect of receipt
		14.10.10 Path reply (PREP) mechanism
			14.10.10.1 General
			14.10.10.2 Function
			14.10.10.3 Conditions for generating and sending a PREP element
			14.10.10.4 PREP element processing
				14.10.10.4.1 General
				14.10.10.4.2 Acceptance criteria
				14.10.10.4.3 Effect of receipt
		14.10.11 Path error (PERR) mechanism
			14.10.11.1 General
			14.10.11.2 Function
			14.10.11.3 Conditions for generating and sending a PERR element
			14.10.11.4 PERR element processing
				14.10.11.4.1 General
				14.10.11.4.2 Acceptance criteria
				14.10.11.4.3 Effect of receipt
		14.10.12 Root announcement (RANN) mechanism
			14.10.12.1 General
			14.10.12.2 Function
			14.10.12.3 Conditions for generating and sending a RANN element
			14.10.12.4 RANN element reception
				14.10.12.4.1 General
				14.10.12.4.2 Acceptance criteria
				14.10.12.4.3 Effect of receipt
		14.10.13 Considerations for support of STAs without mesh functionality
	14.11 Interworking with the DS
		14.11.1 Overview of interworking between a mesh BSS and a DS
		14.11.2 Gate announcement (GANN)
			14.11.2.1 General
			14.11.2.2 Function
			14.11.2.3 Conditions for generating and sending a GANN element
			14.11.2.4 GANN element processing
				14.11.2.4.1 General
				14.11.2.4.2 Acceptance criteria
				14.11.2.4.3 Effect of receipt
		14.11.3 Data forwarding at proxy mesh gates
			14.11.3.1 General
			14.11.3.2 Forwarding of MSDUs from the MBSS to the DS
			14.11.3.3 Forwarding of MSDUs from the DS to the MBSS
		14.11.4 Proxy information and proxy update
			14.11.4.1 General
			14.11.4.2 Proxy information
			14.11.4.3 Proxy update (PXU)
				14.11.4.3.1 General
				14.11.4.3.2 Function
				14.11.4.3.3 Conditions for generating and sending a PXU element
				14.11.4.3.4 Effect of receipt of a PXU element
			14.11.4.4 Proxy update confirmation (PXUC)
				14.11.4.4.1 General
				14.11.4.4.2 Function
				14.11.4.4.3 Conditions for generating and sending a PXUC element
				14.11.4.4.4 Effect of receipt of PXUC element
		14.11.5 Mesh STA collocation
	14.12 Intra-mesh congestion control
		14.12.1 General
		14.12.2 Congestion control signaling protocol
	14.13 Synchronization and beaconing in MBSSs
		14.13.1 TSF for MBSSs
		14.13.2 Extensible synchronization framework
			14.13.2.1 General
			14.13.2.2 Neighbor offset synchronization method
				14.13.2.2.1 General
				14.13.2.2.2 Timing offset calculation
				14.13.2.2.3 Clock drift adjustment
		14.13.3 Beaconing
			14.13.3.1 Beacon generation in MBSSs
			14.13.3.2 Beacon reception for mesh STA
		14.13.4 Mesh beacon collision avoidance (MBCA)
			14.13.4.1 Overview
			14.13.4.2 Beacon timing advertisement
				14.13.4.2.1 General
				14.13.4.2.2 Calculation of neighbor STA’s TBTT
				14.13.4.2.3 Beacon timing information
				14.13.4.2.4 Maintenance of the status number
				14.13.4.2.5 Transmitter’s procedure
				14.13.4.2.6 Receiver’s procedure
			14.13.4.3 TBTT selection
			14.13.4.4 TBTT adjustment
				14.13.4.4.1 Self-determined TBTT adjustment
				14.13.4.4.2 Requested TBTT adjustment
				14.13.4.4.3 TBTT scanning and adjustment procedures
			14.13.4.5 Frame transmission across reported TBTT
			14.13.4.6 Delayed beacon transmissions
	14.14 Power save in a mesh BSS
		14.14.1 General
		14.14.2 Mesh power management modes
			14.14.2.1 General
			14.14.2.2 Peer-specific mesh power management modes
			14.14.2.3 Nonpeer mesh power management modes
		14.14.3 Mesh power management mode indications and transitions
			14.14.3.1 General
			14.14.3.2 Transition to a higher activity level
			14.14.3.3 Transition to a lower activity level
		14.14.4 TIM transmissions in an MBSS
		14.14.5 TIM types
		14.14.6 Mesh awake window
		14.14.7 Power save support
		14.14.8 Operation in peer-specific and nonpeer mesh power management modes
			14.14.8.1 General
			14.14.8.2 Operation in active mode
			14.14.8.3 Operation in deep sleep mode for nonpeer mesh STAs
			14.14.8.4 Operation in light sleep mode for a mesh peering
			14.14.8.5 Operation in deep sleep mode for a mesh peering
			14.14.8.6 Conditions for doze state
		14.14.9 Mesh peer service periods
			14.14.9.1 General
			14.14.9.2 Initiation of a mesh peer service period
			14.14.9.3 Operation during a mesh peer service period
			14.14.9.4 Termination of a mesh peer service period
		14.14.10 MCCA use by power saving mesh STA
15. DSSS PHY specification for the 2.4 GHz band designated for ISM applications
	15.1 Overview
		15.1.1 General
		15.1.2 Scope
		15.1.3 DSSS PHY functions
			15.1.3.1 General
			15.1.3.2 PLME
		15.1.4 Service specification method and notation
	15.2 DSSS PHY specific service parameter list
		15.2.1 Introduction
		15.2.2 TXVECTOR parameters
			15.2.2.1 General
			15.2.2.2 TXVECTOR LENGTH
			15.2.2.3 TXVECTOR DATARATE
			15.2.2.4 TXVECTOR SERVICE
			15.2.2.5 TXVECTOR TXPWR_LEVEL_INDEX
			15.2.2.6 TXVECTOR TIME_OF_DEPARTURE_REQUESTED
			15.2.2.7 TXVECTOR TX_ANTENNA
		15.2.3 RXVECTOR parameters
			15.2.3.1 General
			15.2.3.2 RXVECTOR LENGTH
			15.2.3.3 RXVECTOR RSSI
			15.2.3.4 RXVECTOR SIGNAL
			15.2.3.5 RXVECTOR SERVICE
			15.2.3.6 RXVECTOR RCPI
			15.2.3.7 RXVECTOR SQ
			15.2.3.8 RXVECTOR RX_ANTENNA
		15.2.4 TXSTATUS parameters
			15.2.4.1 General
			15.2.4.2 TXSTATUS TIME_OF_DEPARTURE
			15.2.4.3 TXSTATUS TIME_OF_DEPARTURE_ClockRate
	15.3 DSSS PHY
		15.3.1 Overview
		15.3.2 PPDU format
		15.3.3 PHY field definitions
			15.3.3.1 General
			15.3.3.2 PHY SYNC field
			15.3.3.3 PHY SFD
			15.3.3.4 PHY SIGNAL field
			15.3.3.5 PHY SERVICE field
			15.3.3.6 PHY LENGTH field
			15.3.3.7 PHY CRC field
		15.3.4 PHY/DSSS PHY data scrambler and descrambler
		15.3.5 PHY data modulation and modulation rate change
		15.3.6 Transmit PHY
		15.3.7 Receive PHY
	15.4 DSSS PLME
		15.4.1 PLME SAP sublayer management primitives
		15.4.2 DSSS PHY MIB
		15.4.3 DSSS PHY
		15.4.4 PHY operating specifications, general
			15.4.4.1 General
			15.4.4.2 Operating frequency range
			15.4.4.3 Channel Numbering of operating channels
			15.4.4.4 Spreading sequence
			15.4.4.5 Modulation and channel data rates
			15.4.4.6 Transmit and receive in-band and out-of-band spurious emissions
			15.4.4.7 TX-to-RX turnaround time
			15.4.4.8 RX-to-TX turnaround time
			15.4.4.9 Slot time
			15.4.4.10 Transmit and receive antenna connector impedance
		15.4.5 PHY transmit specifications
			15.4.5.1 Introduction
			15.4.5.2 Transmit power levels
			15.4.5.3 Minimum transmitted power level
			15.4.5.4 Transmit power level control
			15.4.5.5 Transmit spectrum mask
			15.4.5.6 Transmit center frequency tolerance
			15.4.5.7 Chip clock frequency tolerance
			15.4.5.8 Transmit power-on and power-down ramp
			15.4.5.9 RF carrier suppression
			15.4.5.10 Transmit modulation accuracy
			15.4.5.11 Time of Departure accuracy
		15.4.6 PHY receiver specifications
			15.4.6.1 Introduction
			15.4.6.2 Receiver minimum input level sensitivity
			15.4.6.3 Receiver maximum input level
			15.4.6.4 Receiver adjacent channel rejection
			15.4.6.5 CCA
			15.4.6.6 Received Channel Power Indicator Measurement
			15.4.6.7 DSSS PHY TXTIME calculation
16. High rate direct sequence spread spectrum (HR/DSSS) PHY specification
	16.1 Overview
		16.1.1 General
		16.1.2 Scope
		16.1.3 HR/DSSS PHY functions
			16.1.3.1 General
			16.1.3.2 PLME
		16.1.4 Service specification method and notation
	16.2 HR/DSSS PHY
		16.2.1 Overview
		16.2.2 PPDU format
			16.2.2.1 General
			16.2.2.2 Long PPDU format
			16.2.2.3 Short PPDU format
		16.2.3 PPDU field definitions
			16.2.3.1 General
			16.2.3.2 Long PHY SYNC field
			16.2.3.3 Long PHY SFD
			16.2.3.4 Long PHY SIGNAL field
			16.2.3.5 Long PHY SERVICE field
			16.2.3.6 Long PHY LENGTH field
			16.2.3.7 PHY CRC (CRC-16) field
			16.2.3.8 Long PHY data modulation and modulation rate change
			16.2.3.9 Short PHY synchronization (shortSYNC)
			16.2.3.10 Short PHY SFD field (shortSFD)
			16.2.3.11 Short PHY SIGNAL field (shortSIGNAL)
			16.2.3.12 Short PHY SERVICE field (shortSERVICE)
			16.2.3.13 Short PHY LENGTH field (shortLENGTH)
			16.2.3.14 Short CRC-16 field (shortCRC)
			16.2.3.15 Short PHY data modulation and modulation rate change
		16.2.4 PHY/HR/DSSS PHY data scrambler and descrambler
		16.2.5 Transmit PHY
		16.2.6 Receive PHY
	16.3 HR/DSSS PLME
		16.3.1 PLME SAP sublayer management primitives
		16.3.2 HR/DSSS PHY MIB
		16.3.3 HR/DSSS PHY
		16.3.4 HR/DSSS TXTIME calculation
		16.3.5 Vector descriptions
		16.3.6 PHY operating specifications, general
			16.3.6.1 General
			16.3.6.2 Operating frequency range
			16.3.6.3 Channel Numbering of operating channels
			16.3.6.4 Modulation and channel data rates
			16.3.6.5 Spreading sequence and modulation for 1 Mb/s and 2 Mb/s
			16.3.6.6 Spreading sequences and modulation for CCK modulation at 5.5 Mb/s and 11 Mb/s
				16.3.6.6.1 General
				16.3.6.6.2 Cover code for CCK
				16.3.6.6.3 CCK 5.5 Mb/s modulation
				16.3.6.6.4 CCK 11 Mb/s modulation
			16.3.6.7 Transmit and receive in-band and out-of-band spurious emissions
			16.3.6.8 TX-to-RX turnaround time
			16.3.6.9 RX-to-TX turnaround time
			16.3.6.10 Slot time
			16.3.6.11 Transmit and receive impedance at the antenna connector
		16.3.7 PHY transmit specifications
			16.3.7.1 Introduction
			16.3.7.2 Transmit power levels
			16.3.7.3 Transmit power level control
			16.3.7.4 Transmit spectrum mask
			16.3.7.5 Transmit center frequency tolerance
			16.3.7.6 Chip clock frequency tolerance
			16.3.7.7 Transmit power-on and power-down ramp
			16.3.7.8 RF carrier suppression
			16.3.7.9 Transmit modulation accuracy
			16.3.7.10 Time of Departure accuracy
		16.3.8 PHY receiver specifications
			16.3.8.1 Introduction
			16.3.8.2 Receiver minimum input level sensitivity
			16.3.8.3 Receiver maximum input level
			16.3.8.4 Receiver adjacent channel rejection
			16.3.8.5 CCA
			16.3.8.6 Received Channel Power Indicator Measurement
17. Orthogonal frequency division multiplexing (OFDM) PHY specification
	17.1 Introduction
		17.1.1 General
		17.1.2 Scope
		17.1.3 OFDM PHY functions
			17.1.3.1 General
			17.1.3.2 PLME
			17.1.3.3 Service specification method
	17.2 OFDM PHY specific service parameter list
		17.2.1 Introduction
		17.2.2 TXVECTOR parameters
			17.2.2.1 General
			17.2.2.2 TXVECTOR LENGTH
			17.2.2.3 TXVECTOR DATARATE
			17.2.2.4 TXVECTOR SERVICE
			17.2.2.5 TXVECTOR TXPWR_LEVEL_INDEX
			17.2.2.6 TXVECTOR TIME_OF_DEPARTURE_REQUESTED
			17.2.2.7 TXVECTOR CH_BANDWIDTH_IN_NON_HT
			17.2.2.8 TXVECTOR DYN_BANDWIDTH_IN_NON_HT
		17.2.3 RXVECTOR parameters
			17.2.3.1 General
			17.2.3.2 RXVECTOR LENGTH
			17.2.3.3 RXVECTOR RSSI
			17.2.3.4 RXVECTOR DATARATE
			17.2.3.5 RXVECTOR SERVICE
			17.2.3.6 RXVECTOR RCPI
			17.2.3.7 RXVECTOR CH_BANDWIDTH_IN_NON_HT
			17.2.3.8 RXVECTOR DYN_BANDWIDTH_IN_NON_HT
		17.2.4 TXSTATUS parameters
			17.2.4.1 General
			17.2.4.2 TXSTATUS TIME_OF_DEPARTURE
			17.2.4.3 TXSTATUS TIME_OF_DEPARTURE_ClockRate
	17.3 OFDM PHY
		17.3.1 Introduction
		17.3.2 PPDU format
			17.3.2.1 General
			17.3.2.2 Overview of the PPDU encoding process
			17.3.2.3 Modulation-dependent parameters
			17.3.2.4 Timing-related parameters
			17.3.2.5 Mathematical conventions in the signal descriptions
			17.3.2.6 Discrete time implementation considerations
		17.3.3 PHY preamble (SYNC)
		17.3.4 SIGNAL field
			17.3.4.1 General
			17.3.4.2 RATE field
			17.3.4.3 PHY LENGTH field
			17.3.4.4 Parity (P), Reserved (R), and SIGNAL TAIL fields
		17.3.5 DATA field
			17.3.5.1 General
			17.3.5.2 SERVICE field
			17.3.5.3 PPDU TAIL field
			17.3.5.4 Pad bits (PAD)
			17.3.5.5 PHY DATA scrambler and descrambler
			17.3.5.6 Convolutional encoder
			17.3.5.7 Data interleaving
			17.3.5.8 Subcarrier modulation mapping
			17.3.5.9 Pilot subcarriers
			17.3.5.10 OFDM modulation
		17.3.6 CCA
		17.3.7 PHY data modulation and modulation rate change
		17.3.8 PHY operating specifications (general)
			17.3.8.1 General
			17.3.8.2 Outline description
			17.3.8.3 Regulatory requirements
			17.3.8.4 Operating channel frequencies
				17.3.8.4.1 Operating frequency range
				17.3.8.4.2 Channel numbering
				17.3.8.4.3 Channelization
			17.3.8.5 Transmit and receive in-band and out-of-band spurious emissions
			17.3.8.6 Slot time
			17.3.8.7 Transmit and receive impedance at the antenna connector
		17.3.9 PHY transmit specifications
			17.3.9.1 General
			17.3.9.2 Transmit power levels
			17.3.9.3 Transmit spectrum mask
			17.3.9.4 Transmission spurious
			17.3.9.5 Transmit center frequency tolerance
			17.3.9.6 Symbol clock frequency tolerance
			17.3.9.7 Modulation accuracy
				17.3.9.7.1 Introduction
				17.3.9.7.2 Transmitter center frequency leakage
				17.3.9.7.3 Transmitter spectral flatness
				17.3.9.7.4 Transmitter constellation error
			17.3.9.8 Transmit modulation accuracy test
			17.3.9.9 Time of Departure accuracy
		17.3.10 PHY receiver specifications
			17.3.10.1 Introduction
			17.3.10.2 Receiver minimum input sensitivity
			17.3.10.3 Adjacent channel rejection
			17.3.10.4 Nonadjacent channel rejection
			17.3.10.5 Receiver maximum input level
			17.3.10.6 CCA requirements
			17.3.10.7 Received Channel Power Indicator Measurement
		17.3.11 Transmit PHY
		17.3.12 Receive PHY
	17.4 OFDM PLME
		17.4.1 PLME SAP sublayer management primitives
		17.4.2 OFDM PHY MIB
		17.4.3 OFDM TXTIME calculation
		17.4.4 OFDM PHY characteristics
18. Extended Rate PHY (ERP) specification
	18.1 Overview
		18.1.1 General
		18.1.2 Introduction
		18.1.3 Operational modes
		18.1.4 Scope
		18.1.5 ERP functions
	18.2 PHY-specific service parameter list
	18.3 Extended Rate PHY sublayer
		18.3.1 Introduction
		18.3.2 PPDU format
			18.3.2.1 General
			18.3.2.2 Long preamble PPDU format
			18.3.2.3 Short preamble PPDU format
			18.3.2.4 ERP-OFDM PPDU format
		18.3.3 PHY data modulation and rate change
			18.3.3.1 Long and short preamble formats
			18.3.3.2 ERP-OFDM format
		18.3.4 CCA
		18.3.5 PHY receive procedure
	18.4 ERP operating specifications (general)
		18.4.1 Introduction
		18.4.2 Regulatory requirements
		18.4.3 Operating channel frequencies
		18.4.4 Transmit and receive in-band and out-of-band spurious emissions
		18.4.5 SIFS
		18.4.6 CCA performance
		18.4.7 PHY transmit specifications
			18.4.7.1 General
			18.4.7.2 Transmit power levels
			18.4.7.3 Transmit spectral mask
			18.4.7.4 Transmit center frequency tolerance
			18.4.7.5 Symbol clock frequency tolerance
			18.4.7.6 Time of Departure accuracy
		18.4.8 PHY receive specifications
			18.4.8.1 General
			18.4.8.2 Receiver minimum input level sensitivity
			18.4.8.3 Adjacent channel rejection
			18.4.8.4 Receive maximum input level capability
	18.5 ERP PLME
		18.5.1 PLME SAP
		18.5.2 MIB
		18.5.3 TXTIME
			18.5.3.1 General
			18.5.3.2 ERP-OFDM TXTIME calculations
		18.5.4 ERP characteristics
19. High-throughput (HT) PHY specification
	19.1 Introduction
		19.1.1 Introduction to the HT PHY
		19.1.2 Scope
		19.1.3 HT PHY functions
			19.1.3.1 General
			19.1.3.2 PHY management entity (PLME)
			19.1.3.3 Service specification method
		19.1.4 PPDU formats
	19.2 HT PHY service interface
		19.2.1 Introduction
		19.2.2 TXVECTOR and RXVECTOR parameters
		19.2.3 PHYCONFIG_VECTOR parameters
		19.2.4 Effect of CH_BANDWIDTH, CH_OFFSET, and MCS parameters on PPDU format
		19.2.5 Support for NON_HT formats
		19.2.6 TXSTATUS parameters
	19.3 HT PHY
		19.3.1 Introduction
		19.3.2 PPDU format
		19.3.3 Transmitter block diagram
		19.3.4 Overview of the PPDU encoding process
		19.3.5 Modulation and coding scheme (MCS)
		19.3.6 Timing-related parameters
		19.3.7 Mathematical description of signals
		19.3.8 Transmission in the upper/lower 20 MHz of a 40 MHz channel
		19.3.9 HT preamble
			19.3.9.1 Introduction
			19.3.9.2 HT-mixed format preamble
			19.3.9.3 Non-HT portion of the HT-mixed format preamble
				19.3.9.3.1 Introduction
				19.3.9.3.2 Cyclic shift definition
				19.3.9.3.3 L-STF definition
				19.3.9.3.4 L-LTF definition
				19.3.9.3.5 L-SIG definition
			19.3.9.4 HT portion of HT-mixed format preamble
				19.3.9.4.1 Introduction
				19.3.9.4.2 Cyclic shift definition
				19.3.9.4.3 HT-SIG definition
				19.3.9.4.4 CRC calculation for HT-SIG
				19.3.9.4.5 HT-STF definition
				19.3.9.4.6 HT-LTF definition
			19.3.9.5 HT-greenfield format preamble
				19.3.9.5.1 General
				19.3.9.5.2 Cyclic shift definition for HT-greenfield format preamble
				19.3.9.5.3 HT-GF-STF definition
				19.3.9.5.4 HT-greenfield format HT-SIG
				19.3.9.5.5 HT-greenfield format LTF
		19.3.10 Transmission of NON_HT format PPDUs with more than one transmit chain
		19.3.11 Data field
			19.3.11.1 General
			19.3.11.2 SERVICE field
			19.3.11.3 Scrambler
			19.3.11.4 Coding
			19.3.11.5 Encoder parsing operation for two BCC FEC encoders
			19.3.11.6 Binary convolutional coding and puncturing
			19.3.11.7 LDPC codes
				19.3.11.7.1 Introduction
				19.3.11.7.2 LDPC coding rates and codeword block lengths
				19.3.11.7.3 LDPC encoder
				19.3.11.7.4 Parity-check matrices
				19.3.11.7.5 LDPC PPDU encoding process
				19.3.11.7.6 LDPC parser
			19.3.11.8 Data interleaver
				19.3.11.8.1 Overview
				19.3.11.8.2 Stream parser
				19.3.11.8.3 Frequency interleaver
			19.3.11.9 Constellation mapping
				19.3.11.9.1 General
				19.3.11.9.2 Space-time block coding (STBC)
			19.3.11.10 Pilot subcarriers
			19.3.11.11 OFDM modulation
				19.3.11.11.1 General
				19.3.11.11.2 Spatial mapping
				19.3.11.11.3 Transmission in 20 MHz HT format
				19.3.11.11.4 Transmission in 40 MHz HT format
				19.3.11.11.5 Transmission in MCS 32 format
				19.3.11.11.6 Transmission with a short GI
			19.3.11.12 Non-HT duplicate transmission
		19.3.12 Beamforming
			19.3.12.1 General
			19.3.12.2 Implicit feedback beamforming
			19.3.12.3 Explicit feedback beamforming
				19.3.12.3.1 General
				19.3.12.3.2 CSI matrices feedback
				19.3.12.3.3 CSI matrices feedback decoding procedure
				19.3.12.3.4 Example of CSI matrices feedback encoding
				19.3.12.3.5 Noncompressed beamforming feedback matrix
				19.3.12.3.6 Compressed beamforming feedback matrix
		19.3.13 HT Preamble format for sounding PPDUs
			19.3.13.1 General
			19.3.13.2 Sounding with a NDP
			19.3.13.3 Sounding PPDU for calibration
			19.3.13.4 Sounding PPDU for channel quality assessment
		19.3.14 Regulatory requirements
		19.3.15 Channel numbering and channelization
			19.3.15.1 General
			19.3.15.2 Channel allocation in the 2.4 GHz Band
			19.3.15.3 Channel allocation in the 5 GHz band
			19.3.15.4 40 MHz channelization
		19.3.16 Slot time
		19.3.17 Transmit and receive impedance at the antenna connector
		19.3.18 PHY transmit specification
			19.3.18.1 Transmit spectrum mask
			19.3.18.2 Spectral flatness
			19.3.18.3 Transmit power
			19.3.18.4 Transmit center frequency tolerance
			19.3.18.5 Packet alignment
			19.3.18.6 Symbol clock frequency tolerance
			19.3.18.7 Modulation accuracy
				19.3.18.7.1 Introduction to modulation accuracy tests
				19.3.18.7.2 Transmit center frequency leakage
				19.3.18.7.3 Transmitter constellation error
				19.3.18.7.4 Transmitter modulation accuracy (EVM) test
			19.3.18.8 Time of Departure accuracy
		19.3.19 HT PHY receiver specification
			19.3.19.1 Receiver minimum input sensitivity
			19.3.19.2 Adjacent channel rejection
			19.3.19.3 Nonadjacent channel rejection
			19.3.19.4 Receiver maximum input level
			19.3.19.5 CCA sensitivity
				19.3.19.5.1 CCA-Energy Detect (CCA-ED)
				19.3.19.5.2 CCA sensitivity for non-HT PPDUs
				19.3.19.5.3 CCA sensitivity in 20 MHz
				19.3.19.5.4 CCA sensitivity in 40 MHz
			19.3.19.6 Received channel power indicator (RCPI) measurement
			19.3.19.7 Reduced interframe space (RIFS)
		19.3.20 PHY transmit procedure
		19.3.21 PHY receive procedure
	19.4 HT PLME
		19.4.1 PLME SAP sublayer management primitives
		19.4.2 PHY MIB
		19.4.3 TXTIME calculation
		19.4.4 HT PHY
	19.5 Parameters for HT MCSs
20. Directional multi-gigabit (DMG) PHY specification
	20.1 DMG PHY introduction
		20.1.1 Scope
		20.1.2 DMG PHY functions
			20.1.2.1 PHY management entity (PLME)
			20.1.2.2 Service specification method
	20.2 DMG PHY service interface
		20.2.1 Introduction
		20.2.2 TXVECTOR and RXVECTOR parameters
		20.2.3 TXSTATUS parameters
	20.3 Common parameters
		20.3.1 Channelization
		20.3.2 Transmit mask
		20.3.3 Common requirements
			20.3.3.1 Introduction
			20.3.3.2 Center frequency tolerance
				20.3.3.2.1 General
				20.3.3.2.2 Center frequency convergence
			20.3.3.3 Symbol clock tolerance
			20.3.3.4 Transmit center frequency leakage
			20.3.3.5 Transmit rampup and rampdown
			20.3.3.6 Antenna setting
			20.3.3.7 Maximum input requirement
			20.3.3.8 Receive sensitivity
		20.3.4 Timing-related parameters
		20.3.5 Mathematical conventions in the signal description
			20.3.5.1 General
			20.3.5.2 Windowing function
		20.3.6 Common preamble
			20.3.6.1 General
			20.3.6.2 Short Training field
			20.3.6.3 Channel Estimation field
			20.3.6.4 Transmission of the preamble and BRP fields in an OFDM packet
				20.3.6.4.1 General
				20.3.6.4.2 hFilt definition
		20.3.7 HCS calculation for headers of DMG control mode, DMG OFDM mode, and DMG SC mode
		20.3.8 Common LDPC parity matrices
			20.3.8.1 General
			20.3.8.2 Rate 1/2 LDPC code matrix H = 336 rows x 672 columns, Z = 42
			20.3.8.3 Rate 5/8 LDPC code matrix H = 252 rows x 672 columns, Z = 42
			20.3.8.4 Rate 3/4 LDPC code matrix H = 168 rows x 672 columns, Z = 42
			20.3.8.5 Rate 13/16 LDPC code matrix H = 126 rows x 672 columns, Z = 42
		20.3.9 Scrambler
		20.3.10 Received channel power indicator (RCPI) measurement
	20.4 DMG control mode
		20.4.1 Introduction
		20.4.2 PPDU format
		20.4.3 Transmission
			20.4.3.1 Preamble
				20.4.3.1.1 General
				20.4.3.1.2 Short Training field
				20.4.3.1.3 Channel Estimation field
			20.4.3.2 Header
				20.4.3.2.1 General
				20.4.3.2.2 Generation of HCS bits
				20.4.3.2.3 Header encoding and modulation
			20.4.3.3 Data field
				20.4.3.3.1 General
				20.4.3.3.2 Scrambler
				20.4.3.3.3 Encoder
				20.4.3.3.4 Modulation
				20.4.3.3.5 Spreading
		20.4.4 Performance requirements
			20.4.4.1 Transmit requirements
				20.4.4.1.1 Introduction
				20.4.4.1.2 Transmit EVM
			20.4.4.2 Receive requirements
				20.4.4.2.1 Introduction
				20.4.4.2.2 CCA
	20.5 DMG OFDM mode
		20.5.1 Introduction
		20.5.2 PPDU format
		20.5.3 Transmission
			20.5.3.1 Header
				20.5.3.1.1 General
				20.5.3.1.2 Modulation and coding scheme
				20.5.3.1.3 Generation of the HCS bits
				20.5.3.1.4 Header encoding and modulation
			20.5.3.2 Data field
				20.5.3.2.1 General
				20.5.3.2.2 Scrambler
				20.5.3.2.3 Encoding
				20.5.3.2.4 Modulation mapping
				20.5.3.2.5 Pilot sequence
				20.5.3.2.6 OFDM modulation
		20.5.4 Performance requirements
			20.5.4.1 Transmit requirements
				20.5.4.1.1 Introduction
				20.5.4.1.2 Transmit EVM
				20.5.4.1.3 Tx flatness
				20.5.4.1.4 Time of Departure accuracy
			20.5.4.2 Receive requirements
				20.5.4.2.1 Introduction
				20.5.4.2.2 CCA
	20.6 DMG SC mode
		20.6.1 Introduction
		20.6.2 PPDU format
		20.6.3 Transmission
			20.6.3.1 Header
				20.6.3.1.1 General
				20.6.3.1.2 Modulation and coding scheme
				20.6.3.1.3 Generation of the HCS bits
				20.6.3.1.4 Header encoding and modulation
			20.6.3.2 Data field
				20.6.3.2.1 General
				20.6.3.2.2 Scrambler
				20.6.3.2.3 Encoding
				20.6.3.2.4 Modulation mapping
				20.6.3.2.5 Symbol blocking and guard insertion
		20.6.4 Performance requirements
			20.6.4.1 Transmit requirements
				20.6.4.1.1 Transmit EVM
				20.6.4.1.2 Time of Departure accuracy
			20.6.4.2 Receive requirements
				20.6.4.2.1 Introduction
				20.6.4.2.2 CCA
	20.7 DMG low-power SC mode
		20.7.1 Introduction
		20.7.2 Transmission
			20.7.2.1 Preamble
			20.7.2.2 Header
				20.7.2.2.1 General
				20.7.2.2.2 Header encoding and modulation
			20.7.2.3 Data field
				20.7.2.3.1 General
				20.7.2.3.2 Scrambler
				20.7.2.3.3 Encoding
				20.7.2.3.4 Modulation
				20.7.2.3.5 Blocking
	20.8 PHY transmit procedure
	20.9 PHY receive procedure
	20.10 Beamforming
		20.10.1 Beamforming concept
		20.10.2 Beamforming frame format
			20.10.2.1 Sector-level sweep
			20.10.2.2 Beam refinement
				20.10.2.2.1 General
				20.10.2.2.2 BRP packet structure
				20.10.2.2.3 BRP packet header fields
				20.10.2.2.4 BRP packet duration
				20.10.2.2.5 AGC field
				20.10.2.2.6 TRN field
				20.10.2.2.7 Channel measurement
				20.10.2.2.8 BRP resampling in an OFDM packet
	20.11 Golay sequences
	20.12 DMG PLME
		20.12.1 PLME SAP sublayer management primitives
		20.12.2 DMG PHY MIB
		20.12.3 TXTIME calculation
		20.12.4 DMG PHY
21. Very high throughput (VHT) PHY specification
	21.1 Introduction
		21.1.1 Introduction to the VHT PHY
		21.1.2 Scope
		21.1.3 VHT PHY functions
			21.1.3.1 General
			21.1.3.2 PHY management entity (PLME)
			21.1.3.3 Service specification method
		21.1.4 PPDU formats
	21.2 VHT PHY service interface
		21.2.1 Introduction
		21.2.2 TXVECTOR and RXVECTOR parameters
		21.2.3 PHYCONFIG_VECTOR parameters
		21.2.4 Effects of CH_BANDWIDTH parameter on PPDU format
		21.2.5 Support for NON_HT and HT formats
			21.2.5.1 General
			21.2.5.2 Support for NON_HT format when NON_HT_MODULATION is OFDM
			21.2.5.3 Support for HT formats
		21.2.6 TXSTATUS parameters
	21.3 VHT PHY
		21.3.1 Introduction
		21.3.2 VHT PPDU format
		21.3.3 Transmitter block diagram
		21.3.4 Overview of the PPDU encoding process
			21.3.4.1 General
			21.3.4.2 Construction of L-STF
			21.3.4.3 Construction of the L-LTF
			21.3.4.4 Construction of L-SIG
			21.3.4.5 Construction of VHT-SIG-A
			21.3.4.6 Construction of VHT-STF
			21.3.4.7 Construction of VHT-LTF
			21.3.4.8 Construction of VHT-SIG-B
			21.3.4.9 Construction of the Data field in a VHT SU PPDU
				21.3.4.9.1 Using BCC
				21.3.4.9.2 Using LDPC
			21.3.4.10 Construction of the Data field in a VHT MU PPDU
				21.3.4.10.1 General
				21.3.4.10.2 Using BCC
				21.3.4.10.3 Using LDPC
				21.3.4.10.4 Combining to form a VHT MU PPDU
		21.3.5 VHT modulation and coding scheme (VHT-MCS)
		21.3.6 Timing-related parameters
		21.3.7 Mathematical description of signals
			21.3.7.1 Notation
			21.3.7.2 Subcarrier indices in use
			21.3.7.3 Channel frequencies
			21.3.7.4 Transmitted signal
			21.3.7.5 Definition of tone rotation
		21.3.8 VHT preamble
			21.3.8.1 Introduction
			21.3.8.2 Non-VHT portion of VHT format preamble
				21.3.8.2.1 Cyclic shift for pre-VHT modulated fields
				21.3.8.2.2 L-STF definition
				21.3.8.2.3 L-LTF definition
				21.3.8.2.4 L-SIG definition
			21.3.8.3 VHT portion of VHT format preamble
				21.3.8.3.1 Introduction
				21.3.8.3.2 Cyclic shift for VHT modulated fields
				21.3.8.3.3 VHT-SIG-A definition
				21.3.8.3.4 VHT-STF definition
				21.3.8.3.5 VHT-LTF definition
				21.3.8.3.6 VHT-SIG-B definition
		21.3.9 Transmission of NON_HT and HT PPDUs with multiple transmit chains
			21.3.9.1 Transmission of 20 MHz NON_HT PPDUs with more than one transmit chain
			21.3.9.2 Transmission of HT PPDUs with more than four transmit chains
		21.3.10 Data field
			21.3.10.1 General
			21.3.10.2 SERVICE field
			21.3.10.3 CRC calculation for VHT-SIG-B
			21.3.10.4 Scrambler
			21.3.10.5 Coding
				21.3.10.5.1 General
				21.3.10.5.2 BCC encoder parsing operation
				21.3.10.5.3 Binary convolutional coding and puncturing
				21.3.10.5.4 LDPC coding
				21.3.10.5.5 Encoding process for VHT MU PPDUs
			21.3.10.6 Stream parser
			21.3.10.7 Segment parser
			21.3.10.8 BCC interleaver
			21.3.10.9 Constellation mapping
				21.3.10.9.1 General
				21.3.10.9.2 LDPC tone mapping
				21.3.10.9.3 Segment deparser
				21.3.10.9.4 Space-time block coding
			21.3.10.10 Pilot subcarriers
			21.3.10.11 OFDM modulation
				21.3.10.11.1 Transmission in VHT format
			21.3.10.12 Non-HT duplicate transmission
		21.3.11 SU-MIMO and DL-MU-MIMO Beamforming
			21.3.11.1 General
			21.3.11.2 Beamforming Feedback Matrix V
			21.3.11.3 Maximum Number of Total Spatial Streams in VHT MU PPDUs
			21.3.11.4 Group ID
		21.3.12 VHT preamble format for sounding PPDUs
		21.3.13 Regulatory requirements
		21.3.14 Channelization
		21.3.15 Slot time
		21.3.16 Transmit and receive port impedance
		21.3.17 VHT transmit specification
			21.3.17.1 Transmit spectrum mask
			21.3.17.2 Spectral flatness
			21.3.17.3 Transmit center frequency and symbol clock frequency tolerance
			21.3.17.4 Modulation accuracy
				21.3.17.4.1 Introduction to modulation accuracy tests
				21.3.17.4.2 Transmit center frequency leakage
				21.3.17.4.3 Transmitter constellation error
				21.3.17.4.4 Transmitter modulation accuracy (EVM) test
			21.3.17.5 Time of Departure accuracy
		21.3.18 VHT receiver specification
			21.3.18.1 Receiver minimum input sensitivity
			21.3.18.2 Adjacent channel rejection
			21.3.18.3 Nonadjacent channel rejection
			21.3.18.4 Receiver maximum input level
			21.3.18.5 CCA sensitivity
				21.3.18.5.1 General
				21.3.18.5.2 CCA sensitivity for operating classes requiring CCA-ED
				21.3.18.5.3 CCA sensitivity for signals occupying the primary 20 MHz channel
				21.3.18.5.4 CCA sensitivity for signals not occupying the primary 20 MHz channel
			21.3.18.6 RSSI
		21.3.19 PHY transmit procedure
		21.3.20 PHY receive procedure
	21.4 VHT PLME
		21.4.1 PLME SAP sublayer management primitives
		21.4.2 PHY MIB
		21.4.3 TXTIME and PSDU_LENGTH calculation
		21.4.4 VHT PHY
	21.5 Parameters for VHT-MCSs
22. Television very high throughput (TVHT) PHY specification
	22.1 Introduction
		22.1.1 Introduction to the TVHT PHY
		22.1.2 Scope
		22.1.3 TVHT PHY functions
			22.1.3.1 General
			22.1.3.2 PHY management entity (PLME)
			22.1.3.3 Service specification method
		22.1.4 PPDU formats
	22.2 TVHT PHY service interface
		22.2.1 Introduction
		22.2.2 TXVECTOR and RXVECTOR parameters
		22.2.3 Effects of CH_BANDWIDTH parameter on PPDU format
		22.2.4 Support for NON_HT and HT formats
	22.3 TVHT PHY sublayer
		22.3.1 Introduction
		22.3.2 VHT PPDU format in TVWS bands
		22.3.3 Transmitter block diagram
		22.3.4 Overview of the PPDU encoding process
			22.3.4.1 General
			22.3.4.2 Construction of L-STF
			22.3.4.3 Construction of the L-LTF
			22.3.4.4 Construction of L-SIG
			22.3.4.5 Construction of TVHT-SIG-A
			22.3.4.6 Construction of TVHT-STF
			22.3.4.7 Construction of TVHT-LTF
			22.3.4.8 Construction of TVHT-SIG-B
			22.3.4.9 Construction of the Data field in an SU PPDU
				22.3.4.9.1 Using BCC
				22.3.4.9.2 Using LDPC
			22.3.4.10 Construction of the Data field in an MU PPDU
				22.3.4.10.1 General
				22.3.4.10.2 Using BCC
				22.3.4.10.3 Using LDPC
				22.3.4.10.4 Combining to form an MU PPDU
		22.3.5 Modulation and coding scheme (MCS)
		22.3.6 Timing-related parameters
		22.3.7 Mathematical description of signals
		22.3.8 TVHT preamble
			22.3.8.1 Introduction
			22.3.8.2 Non-TVHT portion of TVHT format preamble
				22.3.8.2.1 Cyclic shift definition for pre-TVHT modulated fields
				22.3.8.2.2 L-STF definition
				22.3.8.2.3 L-LTF definition
				22.3.8.2.4 L-SIG definition
			22.3.8.3 TVHT portion of TVHT format preamble
				22.3.8.3.1 Introduction
				22.3.8.3.2 Cyclic shift for TVHT modulated fields
				22.3.8.3.3 TVHT-SIG-A definition
				22.3.8.3.4 TVHT-STF definition
				22.3.8.3.5 TVHT-LTF definition
				22.3.8.3.6 TVHT-SIG-B definition
		22.3.9 Transmission of NON_HT and HT PPDUs with multiple antennas
		22.3.10 Data field
			22.3.10.1 General
			22.3.10.2 SERVICE field
			22.3.10.3 CRC calculation for TVHT-SIG-B
			22.3.10.4 Scrambler
			22.3.10.5 Coding
			22.3.10.6 Stream parser
			22.3.10.7 Segment parser
			22.3.10.8 BCC interleaver
			22.3.10.9 Constellation mapping
				22.3.10.9.1 General
				22.3.10.9.2 LDPC tone mapping
				22.3.10.9.3 Segment deparser
				22.3.10.9.4 Space-time block coding
			22.3.10.10 Pilot subcarriers
			22.3.10.11 OFDM modulation transmission in VHT format
			22.3.10.12 Non-HT duplicate transmission
		22.3.11 SU-MIMO and MU-MIMO Beamforming
			22.3.11.1 General
			22.3.11.2 Beamforming Feedback Matrix V
			22.3.11.3 Group ID
		22.3.12 TVHT preamble format for sounding PPDUs
		22.3.13 Regulatory requirements
		22.3.14 Channelization
		22.3.15 Slot time
		22.3.16 Transmit and receive port impedance
		22.3.17 TVHT transmit specification
			22.3.17.1 Transmit spectrum mask
			22.3.17.2 Spectral flatness
			22.3.17.3 Transmit center frequency and symbol clock frequency tolerance
			22.3.17.4 Modulation accuracy
				22.3.17.4.1 Introduction to modulation accuracy tests
				22.3.17.4.2 Transmit center frequency leakage
				22.3.17.4.3 Transmitter constellation error
				22.3.17.4.4 Transmitter modulation accuracy (EVM) test
			22.3.17.5 Time of Departure accuracy
		22.3.18 TVHT receiver specification
			22.3.18.1 General
			22.3.18.2 Receiver minimum input sensitivity
			22.3.18.3 Adjacent channel rejection
			22.3.18.4 Nonadjacent channel rejection
			22.3.18.5 Receiver maximum input level
			22.3.18.6 CCA sensitivity
				22.3.18.6.1 General
				22.3.18.6.2 CCA sensitivity for operating classes requiring CCA-ED
				22.3.18.6.3 CCA sensitivity for signals occupying the primary channel
				22.3.18.6.4 CCA sensitivity for signals not occupying the primary channel
			22.3.18.7 RSSI
		22.3.19 PHY transmit procedure
		22.3.20 PHY receive procedure
	22.4 TVHT PLME
		22.4.1 PLME SAP sublayer management primitives
		22.4.2 PHY MIB
		22.4.3 TXTIME and PSDU_LENGTH calculation
		22.4.4 TVHT PHY
	22.5 Parameters for TVHT MCSs
Annex A (informative) Bibliography
Annex B (normative) Protocol Implementation Conformance Statement (PICS) proforma
Annex C (normative) ASN.1 encoding of the MAC and PHY MIB
Annex D (normative) Regulatory references
Annex E (normative) Country elements and operating classes
Annex F (normative) HT LDPC matrix definitions
Annex G (normative) Frame exchange sequences
Annex H (normative) Usage of Ethertype 89-0d
Annex I (informative) Examples of encoding a frame for OFDM PHYs and DMG PHYs
Annex J (informative) RSNA reference implementations and test vectors
Annex K (informative) TSPECs and Admission control
Annex L (informative) Examples and sample code for encoding a TIM Partial Virtual Bitmap
Annex M (informative) Integration function
Annex N (informative) AP functional description
Annex O (informative) Additional VHT and HT information
Annex P (informative) Location and Time Difference accuracy test
Annex Q (informative) Example use of the Destination URI for Event and Diagnostic Reports
Annex R (informative) Interworking with external networks
Annex S (informative) Mesh BSS operation
Annex T (informative) Overlapping BSS (OBSS) management
Annex U (informative) Functions of the centralized coordination service root (CCSR)
Annex V (informative) TSPEC aggregation for DMG BSSs
Back cover