ICAA13 Pittsburgh: Proceedings of the 13th International Conference on Aluminum Alloys

Front Matter....Pages i-xxxi
Aberration-Corrected STEM Study of Precipitates in an Al-Mg-Si-Ge-Cu Alloy....Pages 3-8
Diffraction-Amalgamated Grain-boundary Tracking (DAGT) technique and its application to an aluminum alloy....Pages 9-14
Effect of Composition and Pre-Ageing on the Natural Ageing and Paint-Baking Behaviour of Al-Mg-Si Alloys....Pages 15-20
Improvement in the Characterization of the 2099 Al-Li Alloy by FE-SEM....Pages 23-28
Towards new aluminium alloys through advances in atom probe microscopy....Pages 29-30
Nano-Scale Characterization of Al-Mg Nanocrystalline Alloys....Pages 31-35
Muon Spin Relaxation and Positron Annihilation Spectroscopy Studies of Natural Aging in Al-Mg-Si Alloys....Pages 37-42
Monitoring Precipitation during Rapid Quenching of Aluminium Alloys by Calorimetric Reheating Experiments....Pages 43-48
Hydrogen Depth-Profiling and Desorption Kinetics in Rapidly Solidified Al-Fe Alloys....Pages 49-54
Three-Dimensional Analysis of Microstructure in Cast Aluminium Piston Alloys....Pages 55-60
Dislocation Density Changes in Ultrafine-grain Aluminum during Tensile Deformation....Pages 61-66
Study on DC Casting Process of Three-Layer Composite Ingots of 4045/3004/4045 Aluminum Alloys....Pages 69-75
Study on Electromagnet-Air Knife DC Casting Process of Large-Size AA 7055 Aluminum Alloys....Pages 77-83
Development of Large-size Ultrasonic Sonotrodes for Cavitation Treatment of Molten Metals....Pages 85-90
Microstructural Evolution in Intensively Melt Sheared Direct Chill Cast Al-Alloys....Pages 91-96
The grain refinement of 7050 alloy using al-5ti-1b and al-3ti-0.15c grain refiners....Pages 97-103
Grain refining potency of LaB6 on aluminum alloy....Pages 105-109
The good grain refining performance of a new kind of Al-Ti-C-B master alloy....Pages 113-122
Assestment of the Al-Ni-Mn-Fe-Si-Zr Phase Diagram for New Generation Heat Resistant Casting Aluminum Alloys....Pages 123-128
The Influence of Heat Treatment Parameters on the Electrical Conductivity of AlSi7Mg and AlSi10Mg Aluminum Cast Alloys....Pages 129-135
The Effect of Nickel on the Thermal Conductivity of Al-Si Cast Alloys....Pages 137-142
Production of Single Cylinder Engine Piston through Vacuum Die Casting in Sedi Enugu.....Pages 143-149
Fatigue behavior in rheocast aluminum 357 suspension arms using the SEED process....Pages 151-156
Single Roll Caster to Cast Aluminum Alloy Strip....Pages 157-162
Roll Caster to Cast Clad Strips....Pages 163-168
Tests of Heat Treatment Conditions of AlZr0.22 Alloy, Produced using the Continuous Casting Method....Pages 169-175
Investigation on the evolution of the microstructure during homogenization in thin Al sheets....Pages 177-182
Investigation of Acoustic Streaming in Aluminum Melts Exposed to High-Intensity Ultrasonic Irradiation....Pages 183-188
Fabrication of Aluminum Alloy-Based Diamond Grinding Wheel by the Centrifugal Mixed-Powder Method For Novel Machining Technology of CFRP....Pages 189-194
Preparation of Al-Sc Master Alloy by Aluminothermic Reaction with Special Molten Salt....Pages 195-200
In situ Synthesis of Al/TiC Composites by Combustion Reaction in an Aluminium Melt....Pages 201-206
Effects of Electroslag Refining on Removal of Iron Impurity and Alumina Inclusions from Aluminum....Pages 207-212
Aging Behavior of Flexcast® Al-Mg Alloys with Sc and Zr Additions....Pages 213-218
Electromagnetic Continuous Casting of Free-Shaped Aluminum Billet....Pages 219-223
Effect of Mn on the Interaction between Die Casting Steel and Al Alloy....Pages 225-229
Limitation of Shrinkage Porosity in Aluminum Rotor Die Casting....Pages 231-236
The Effect of Alloying Elements on Thermal Conductivity and Casting Characteristic in High Pressure Die Casting of Aluminum Alloy....Pages 237-242
Initial Studies of 6082 Aluminium Thin Films....Pages 245-250
Finite Element Simulation of Shot Peening: Prediction of Residual Stresses and Surface Roughness....Pages 251-256
The Potential of the Cold Spray Process for the Repair and Manufacture of Aluminium Alloy Parts....Pages 257-263
Utilisation of Atom Probe Data to Model Precipitation and Strengthening in an Al-Mg-Si-Cu Alloy During Natural Ageing and Early-Stage Artificial Ageing....Pages 267-272
Ab initio simulations of vacancy-solute clusters in Al-Mg-Si and Al-Zn-Mg alloys....Pages 273-277
The Role of the Si Network to the Stabilization of Hardening Precipitates in the Al-Mg-Si(-Cu) Alloy System....Pages 279-284
Residual Stress Analysis in AA7449 As-Quenched Thick Plates Using Neutrons and Fe Modelling....Pages 285-291
A Through Process Model for Extruded AA3xxx Aluminum Alloys....Pages 293-298
Modeling the Recrystallization Textures in Particle Containing Al Alloys after Various Rolling Reductions....Pages 299-304
TCAL1 and MOBAL2 — The Development and Validation of New Thermodynamic and Mobility Databases for Aluminium Alloys....Pages 305-310
Advances in Integrated Computational Materials Engineering “ICME”....Pages 311-318
Numerical Simulation of Flat Rolling Practices....Pages 319-324
Modelling the Effect of Room Temperature Storage and Deformation on the Age-hardening Behaviour of Al-Mg-Si alloys....Pages 325-330
Evaluation Of The Quenching Sensitivity Of Al-Zn-Mg-Cu-Zr Aluminum Alloys By Mole Fraction Of Equilibrium Phases....Pages 331-336
Modelling Grain Deformation during Extrusion of AA3003 using the Finite Element Method....Pages 337-342
Experience of Developing and Introduction in Industry New Primary and Secondary Al-Alloys with Given Properties for Shape Casting....Pages 343-348
Application of Microelectrochemical Methods for Understanding Localized Corrosion Behavior of Aluminum Alloys....Pages 351-361
Precipitation of the β-phase and Corrosion Behavior of an Al-6.8 wt.% Mg Alloy....Pages 363-369
Testing the Corrosion Behaviour of Plated Aluminum Strips for Heat Exchangers Operating in the Automotive Industry....Pages 371-376
Corrosion Protection of Light Alloys using Low Pressure Cold Spray....Pages 377-389
Crystallographic Orientation Dependence of Corrosion Behabior of 5N Purity Aluminum in Different Concentrations of HCl Aqueous Solutions....Pages 391-396
Corrosion Fatigue Mechanism on Hot-Forged AA6082 Aluminum Alloy....Pages 397-403
Corrosion Inhibition of Stress Corrosion Cracking and Localized Corrosion of Turbo-Expander Materials....Pages 405-415
Corrosion Characteristics of an Al-1.78%Si-13.29%Mg Alloy in Chloride Solutions....Pages 417-423
Corrosion Performance of New Generation Aluminum-Lithium Alloys for Aerospace Applications....Pages 425-430
Comparison of corrosion performance and mechanisms of Al-Cu alloys with and without Li addition....Pages 431-436
The effect of stress in age-forming on corrosion behavior of high-strength aluminum alloy....Pages 437-442
Corrosion and Potentiostatic Polarization of an Al-Cu-Li Alloy under Tensile Stress....Pages 443-450
The Effect of Chemical Composition and Structure on the Corrosion Resistance of Plated Aluminium Alloy Strips....Pages 451-457
Effect of Fatigue and Damage Tolerance Material Properties on the Efficiency of Aircraft Structures....Pages 461-470
About the Challenge in Determining the Cyclic Material Behavior of Aluminum Alloys for Numerical Fatigue Analyses....Pages 471-478
A Microstructure Based Multi-Site Crack Growth Model....Pages 479-484
Short Fatigue Crack Growth Micromechanisms in a Cast Aluminium Piston Alloy....Pages 485-490
Fatigue Life of Ablation Cast 6061-T6 Components....Pages 491-497
Mechanical Properties of Heat Exchanger Tube Materials at Elevated Temperatures....Pages 499-504
Fatigue Behavior and Damage Monitoring of Ultrasonic Welded Hybrid Joints....Pages 505-510
Fatigue Resistance of Al-Cu-Li and Comparison with 7xxx Aerospace Alloys....Pages 511-516
Fatigue Crack Growth Behavior of 2099-T83 Extrusions in two Different Environments....Pages 517-522
Influence of microstructure on the fretting resistance of Al-Cu-Li alloys....Pages 523-528
Al-Li-Cu-Mg-(Ag) Products for Lower Wing Skin Applications....Pages 529-534
Development of High Toughness Sheet and Extruded Products for Airplane Fuselage Structures....Pages 535-540
Expanding the Availability of Lightweight Aluminum Alloy Armor Plate Procured from Detailed Military Specifications....Pages 541-546
Threshold stress of A3003 alloy....Pages 547-552
Ultrasonic fatigue of SiC particle reinforced aluminum in the VHCF-regime....Pages 553-558
Influence of Strain Hardening on Rheological Properties of AlMgSi Wires....Pages 559-564
Origin of Ductile Fracture in Aluminum Alloys....Pages 565-570
Damage Tolerance Applied to Design of Mid-Size Aircraft....Pages 571-580
The Metallurgy of High Fracture Toughness Aluminum-Based Plate Products for Aircraft Internal Structure....Pages 581-586
The Evolution of Plate and Extruded Products with High Strength and Fracture Toughness....Pages 587-592
Research on the High-cycle Fatigue and Crack Initiation Behavior of AA7449 Alloy....Pages 593-598
Vehicle Lightweighting: Challenges and Opportunities with Aluminum....Pages 599-605
Correlation of Fracture Behavior with Microstructure in Friction Stir Welded, and Spin-Formed Al-Li 2195 Domes....Pages 609-622
Effect of Process Parameters on Microstructure Stability of FSW Butt Joints after Thermal Treatments....Pages 623-628
Microhardness Profile and Microstructure Characterization in Friction Stir Processing Zone of the Aged and Solid Solution Treated 7075 Aluminum Alloys....Pages 629-635
Microstructure and mechanical properties of dissimilar friction stir welds using AA6061-T6 and AZ31 plates....Pages 637-642
Microstructure and Mechanical Properties of Friction Stir Welded Aluminum Alloy/Stainless Steel Lap Joints....Pages 643-646
The Effect of the Variation of Microstructure in the Friction Stir Welded Zone on the Strain and Tensile Properties of Al2139....Pages 647-652
Hardening Potential of an Al-Cu-Li Friction Stir Weld....Pages 653-658
Material Testing and Modeling of Aluminum Alloy Sheet in Support of Forming Simulations....Pages 659-664
Evaluation of the Ring Compression Test for the Parameter Determination of Extended Friction Models....Pages 665-674
Finite Element Peen Forming Simulation....Pages 675-680
The Influence of Alloy Composition on the Microstructure, Tensile Ductility and Formability of 6xxx Alloys....Pages 681-686
Accelerated Post-Weld Natural Ageing in Ultrasonic Welding Aluminium 6111-T4 Automotive Sheet....Pages 687-692
Limitations of the M-K Based Forming Limit Diagrams....Pages 693-698
Influence of Forming Conditions on Springback in V-bending Process Using Servo Press....Pages 699-704
Anisotropy and Forming Limit Diagram Comparison of DC and CC 5xxx O Temper Aluminum Alloy Sheets....Pages 705-710
Comparison of Localized Deformation in Crystal Plasticity Based Finite Element Simulations between Experimentally Measured and Statistically Generated Three-Dimensional Microstructures for the Aluminum Alloy 5754....Pages 711-716
Path Independent Polar Effective Plastic Strain (PEPS) Diagram for Sheet Forming....Pages 717-722
Effect of Impact Compression on the Age-Hardening of Rapidly Solidified Al-Zn-Mg Base Alloys....Pages 723-730
Fatigue and Creep Properties of Al-Si Brazing Filler Metals....Pages 731-736
Effect of Additional Elements of Al-Si Filler Alloy on Flowability and Clearance Fillability....Pages 737-742
Influence of Erosion Phenomenon on Flow Behavior of Liquid Al-Si Filler Between Brazed Components....Pages 743-748
Effects of Plate Thickness and Projection Shape on the Microstructure and Strength of High-Speed Solid-State Joined 2024 Alloy Studs and 5052 Alloy Plates....Pages 749-754
Interfacial Reaction During Dissimilar Joining of Aluminum Alloy to Magnesium and Titanium Alloys....Pages 755-760
Joining of 2024 Aluminum Alloy Stud to AZ80 Magnesium Alloy Extruded Plate by Advanced High-Speed Solid-State Method....Pages 761-770
Interface Structure and Bonding in Rapid Dissimilar FSSW of Al to Steel Automotive Sheet....Pages 771-776
Effect of Additional Element on Hybrid Laser Weldability in Al-Mn Alloys....Pages 777-782
Experimental and Numerical Analysis of Formation Manner of Characteristic Wavy Morphology in Impact Welded Similar- and Dissimilar-Metal Plates....Pages 783-788
Influences on ARC Stability in Welding of Aluminum Pin-Structures....Pages 789-794
Multiscale characterization and mechanical modeling of an Al-Zn-Mg electron beam weld....Pages 795-800
High Temperature Deformation Behavior of a 6N01 Aluminum Alloy Extrusion with a Seam Weld....Pages 801-806
Simulation of Local Material Properties during Laser Beam Welding of Aluminum-Titanium Compounds....Pages 807-812
Changes in Microstructure during High Strain Rate Superplastic Deformation of an Al-Zn-Mg-Cu-Zr Alloy Containing Sc....Pages 813-818
Investigation of Superplasticity in Aluminum Alloy 5083....Pages 819-824
Microstructure Evolution and Tensile Property of Al-4.35Cu-1.53Mg Alloy during Creep Age Forming Process....Pages 825-830
New Analysis of Solute Drag in AA5754 by Precise Determination of Point Defect Generation and the Orowan Relation....Pages 831-836
The Influence of Microstructure and Composition on the Machinability of Al-Si Alloys....Pages 837-842
Modeling of Transients as a Response to Changes in Strain path of Commercially Pure Aluminium....Pages 843-848
A New Crystal Plasticity Based Constitutive Model Incorporating Backstress for FCC Polycrystals....Pages 849-854
Numerical Analysis of Surface Roughening and Necking in Aluminum Alloy Tubes Under Internal Pressure....Pages 855-860
Polycrystal-Plasticity Simulation of Roping in AA 6xxx Automotive Sheet Alloys....Pages 861-866
Properties of Free-Machining Aluminum Alloys at Elevated Temperatures....Pages 867-872
Mechanical Properties of Al-Mg-Sc-Zr Alloys at Cryogenic and Ambient Temperatures....Pages 873-878
Manufacturing Challenges for Aluminum Sheet in the Automotive Industry....Pages 879-884
Thermal Modeling and Die Design Tools for Warm Forming Applications....Pages 885-890
Buckling of Aluminium Sheet Components....Pages 891-896
Predicting Hot Deformation of AA5182 Sheet....Pages 897-902
Examination of Buckling Behavior of Thin-Walled Al-Mg-Si Alloy Extrusions....Pages 903-908
Crystal Plasticity Calculations of Mechanical Anisotropy of Aluminium Compared to Experiments and to Yield Criterion Fittings....Pages 909-914
Microstructure and mechanical properties of an electron beam welds in a spray-deposited Al-Zn-Mg-Cu alloy....Pages 915-920
Characterization of Damage Mechanisms During Bending of 6xxx Aluminum Automotive Sheets....Pages 921-926
Heat treatment of welded joints made on 7020 alloy with the AlMg5 alloy....Pages 927-932
Development of Age-Hardening Technology for Ultrafine-Grained Al-Li-Cu Alloys Fabricated by High-Pressure Torsion....Pages 933-938
Tailored Welding Technique for High Strength Al-Cu Alloy for Higher Mechanical Properties....Pages 939-944
Distinguishing Dynamic Recrystallization (DRX) in Aluminum and Single-Phase Alloys....Pages 945-950
Strain Hardening, Strain Softening and the Portevin-Le Chatelier Effect in Cryomilled, Ultrafine Grained AA 5083....Pages 951-956
Fabrication of Nanostructural Aluminum Alloy Powder with Ball Milling Method....Pages 959-968
Magnetic, Structural and Mechanical Behavior of Transitional Bulk Nanostructured Al Alloy....Pages 969-974
Production of Al-Based Nano-Intermetallics by High-Pressure Torsion....Pages 975-984
Novel Cold Spray Nanostructured Aluminum....Pages 985-991
Self-propagating foaming process of Al-Ti reactive precursor for fabricating long scale porous materials....Pages 993-998
ALUHAB — The Superior Aluminium Foam....Pages 999-1004
Microstructures and Mechanical properties of Al-Al2O3 Composites Processed by Disk-HPT and Ring-HPT....Pages 1005-1010
Powder metallurgy of high-strength Al90.4Y4.4Ni4.3Co0.9 gas-atomized powder....Pages 1011-1016
Advanced Class of FML on the Base Al-Li Alloy 1441 with Lower Density....Pages 1017-1022
Solute Distribution and Mechanical Properties of Ultra-Fine-Grained Al-Mg Alloys....Pages 1023-1031
Age-hardening Behavior of MgB2 Particle Dispersed Al Alloy Composite Materials....Pages 1033-1038
Production of the Al3Ti foam by microwave heating....Pages 1039-1042
Nanocluster Formation Behavior in Al-Zn-Mg Alloys with Microalloying Elements and Improved Mechanical Properties....Pages 1043-1047
Effects of Microalloying Elements (Cu, Ag) on Nanocluster Formation and Age-Hardening Behavior in Al-Mg-Si Alloys....Pages 1051-1056
Effect of Low Cu Amounts and Pre-Deformation on the Precipitation in Al-Mg-Si Alloys....Pages 1057-1062
High Resolution Characterization of the Precipitation Behavior of an Al-Zn-Mg-Cu alloy....Pages 1063-1068
Precipitation Process in a High Mg to Cu Ratio Al-Mg-Cu-Ge Alloy....Pages 1069-1074
Investigations on the Precipitation in Monocrystalline Al-Mg-Si Model Alloy by Small Angle Neutron Scattering....Pages 1075-1081
Prediction of the Influence of Si Content on the Ageing Behavior of Al-Mg-Si-Cu Alloys by Thermodynamic Modeling....Pages 1083-1088
Continuous Heating Dissolution Diagrams of Aluminum Alloys....Pages 1089-1094
Dynamic room temperature precipitation during cyclic deformation of an Al-Zn-Mg-Cu alloy....Pages 1095-1100
Effects of Pre-Aging Condition on Multi-Step Aging Behavior in Al-Mg-Si Alloys....Pages 1101-1106
Hardening Response to Rapid Aging Processes and Precipitation in Al-7%Si-0.3%Mg Alloy....Pages 1107-1112
Thermodynamics of Al3Li nano-clusters in an Aluminum solid solution....Pages 1113-1118
The Effect of Cu and Cr on Clustering and Precipitation in Al-Mg-Si Alloys....Pages 1119-1124
Influence of Mg and Si on Cluster Formation in Al-Mg-Si Alloys Studied by Positron Annihilation Lifetime Spectroscopy....Pages 1125-1130
Microstructural Characterization of Flexcast® Al-Mg Alloys with Scandium and Zirconium Additions....Pages 1131-1137
Precipitation in Al-Cu-Li alloys: from the kinetics of T1 phase precipitation to microstructure development in friction stir welds....Pages 1139-1144
Quantitative description of the T1 morphology and strengthening mechanisms in an age-hardenable Al-Li-Cu alloy....Pages 1145-1154
Orientation Relationship of Dispersoids Precipitated in an AA3XXX Alloy during Annealing at Low Temperatures....Pages 1155-1160
Hf-Containing Precipitates in Al-Si-Mg-Hf Alloy during Heat Treatments at 400°C-560°C....Pages 1161-1166
Ageing Hardning and Precipitationg of the 7A60 Alloy during Cooling Aging....Pages 1167-1172
Precipitation Morphology in Al-Mg-Si-Sc-Zr Hot-Rolled Sheet....Pages 1173-1180
The Effect of Natural Ageing on Quench Sensitivity in Al-Mg-Si Alloys....Pages 1181-1185
An Isothermal Calorimetry Technique for Measurement of C-Curves in AA6XXX Alloys....Pages 1187-1192
Influence of chemical composition on aging property of 7204 aluminum alloy....Pages 1193-1198
Transforming of the Morphology of Iron Phases in Aluminum Alloys....Pages 1199-1204
Effects of microalloying with Sn on the precipitation process of Al-3.5Cu-0.4Mg (wt%) alloy....Pages 1205-1208
Effect of Fe Content on the Transformation of Ferrous Phases in 6XXX Alloys during Homogenizing Annealing....Pages 1209-1215
Evolution of nanometer precipitates in AA7050 alloy subjected to overaging treatment and warm deformation....Pages 1217-1222
Precipitation morphology and tensile properties of Al-0.62Mg-0.32Si alloy aged at low temperature....Pages 1223-1228
Microstructural Change and Mechanical Properties with Isochronal Aging in Al-Ni-Gd Metallic Glasses....Pages 1229-1234
Age-Hardening Behavior of Al-Mg2Si Alloys with Different Mn and Fe Contents....Pages 1235-1240
The Features of Phase Composition and Microstructure of Eutectic Piston Alloys AlSi12CuMgNi and AlSi12Cu2MgNi....Pages 1241-1244
Tem Observation of Precipitates in Ag-Added Al-Mg-Si Alloys....Pages 1245-1250
Effect of Ag and Cu Contents on the Age Hardning Behavior of Al-Zn-Mg Alloys....Pages 1251-1254
Effect of Cu or Ag Addition on Tensile Deformation in Al-Zn-Mg Alloys....Pages 1255-1258
Hrtem Observation of the Precipitates in Cu and Ag Added Al-Mg-Si Alloys....Pages 1259-1261
Effect of Cu or Ag Addition on Two-Step Aging Al-Mg-Si Alloy....Pages 1263-1266
Effect of Cold Rolling on Age Hardening in Excess Mg-Type Al-Mg-Si Alloys Including Some Minor Elements....Pages 1267-1270
Effect of Transition Metals on the Age-Hardening Behavior of Al-Mg-Ge Alloys....Pages 1271-1274
Tem Observation of Precipitates in Al-Mg-Ge Alloys with Different Mg2Ge Contents....Pages 1275-1278
Effect of Quenching Condition on Aging of Dilute Al-Ag Alloy....Pages 1279-1281
Influence of Silicon Addition on Precipitation Behavior in an Al-Cu-Mg Alloy....Pages 1283-1288
X-Ray Diffraction Study on Lattice Constant of Supersaturated Solid Solution for Al Based Binary Alloys and Selected Al-Zn-Mg-Cu Alloys....Pages 1289-1294
Exploring Property Based Aluminum Specifications....Pages 1295-1300
Emerging Development in Al-Alloy Recycling for Nontraditional Aluminum Metal Matrix Composites Processing....Pages 1303-1308
Reuse of Aluminum Dross as an Engineered Product....Pages 1309-1314
Separation of Inclusion Particles from Liquid Metal by Electromagnetic Force....Pages 1315-1320
The Influence of Pyrolythic Reactions on the Aluminum Dross Formation during the Twin Chamber Remelting Process....Pages 1321-1326
Turbulent Coagulation of Solid Particles in Molten Aluminium—Kinetics of Cluster Formation....Pages 1327-1336
Purification using high pressure molten aluminum....Pages 1337-1342
Recycling of Aluminum Alloy with Dimox and Rheocasting Functionalize High Performance Structural Foam Composite....Pages 1343-1348
It’s not Your Father’S Casthouse any More....Pages 1349-1355
Aluminum Monolithic Alloy and Multi-Alloy Cast Using Planar Solidification Approach....Pages 1359-1365
The Effect of Planar Solidification on Mechanical Properties of Al-Zn-Mg-Cu-Zr Alloy Plate....Pages 1367-1375
Functional Gradient Products Enabled by Planar Solidification Technologies....Pages 1377-1382
Role of Solute and Transition Metals in Grain Refinement of Aluminum Alloys under Ultrasonic Melt Treatment....Pages 1383-1388
Melt Conditioned Casting of Aluminum Alloys....Pages 1389-1394
Impact Toughness Enhancement of Melt Treated Al-Si-Mg Cast Alloy....Pages 1395-1400
Intermetallic Phase Formation in TP-1 and DC Cast Billet of an AA6063 Al Alloy....Pages 1401-1411
The Interdependence Model: An Improved Predictor of Grain Size....Pages 1413-1418
Analysis of Dendritic Primary Al Grain Ripening and Solid Fraction Measurement in A356 Alloy Semi-Solid Slurry Using Segregation Sensitive Reagent....Pages 1419-1424
Microstructure Development and Control in Hypereutectic Cast Al-Si Alloys Evaluated by Metallurgical Analysis and Neutron Diffraction....Pages 1425-1430
Semi-Solid Forming of A356 Alloy by Rapid Slurry Forming Process....Pages 1431-1440
Influence of the Fe Content, Mn/Fe Ratio and Cooling Rate on the Modification Process of Fe Intermetallic Compounds in Hypoeutectic Al-Si Alloys....Pages 1441-1450
Effect of Oxide Level on Pore Formation in A356 Alloy by X-Ray Imaging and Directional Solidification Technology....Pages 1451-1456
Microstructure of 3003/4045 Aluminum Alloy Clad Strip Fabricated by Vertical Type Tandem Twin Roll Caster....Pages 1457-1462
The Influence of Cu on Eutectic Nucleation and Morphology in Hypoeutectic Al-Si Alloys....Pages 1463-1467
Primary Cooling Heat Transfer during the Direct-Chill Casting of Aluminum Alloy AA6111....Pages 1469-1474
The Relationship between Dendrite Arm Spacing and Cooling Rate of Al-Si Casting Alloys in High Pressure Die Casting....Pages 1475-1482
Characterization of Metal Flow in Metals Processing by a Combined Approach using Advanced Experimental Grid Pattern Techniques Coupled with FE-analysis....Pages 1483-1492
Research and Development of High-Strength of Al-Zn-Mg-Cu Alloys....Pages 1493-1498
Effect of Alloy Elements on Microstructures and Mechanical Properties in Al-Mg-Si Alloys....Pages 1501-1513
Dispersion Hardening Effect of Dispersoids in 3xxx Al Alloys With Varying Manganese and Silicon Contents....Pages 1515-1520
Effect of Hot Extrusion Conditions on the Microstructure of AA3003....Pages 1521-1526
Effect of Iron and Silicon on Strength and Electrical Resistivity of Al-Zr Wire Alloys....Pages 1527-1532
Influence of the Chemical Composition on the Structure and Properties of Lead-Free Machinable AA6023 (Al-Mg-Si-Sn-Bi) Alloy....Pages 1533-1538
Homogenization of 6xxx Alloy Ingots with an Addition of Vanadium....Pages 1539-1544
Hot Extrusion of Aluminum Chips....Pages 1545-1550
3-Dimensional Microstructure of Al-Al3Ti Alloy Severely Deformed by ECAP....Pages 1551-1558
Abnormal Recrystallization Behavior of High Purity Aluminum Foil....Pages 1559-1573
Effect of Annealing Condition on Earing and Texture Formation in Cold Rolled AA5182 Aluminum Alloy....Pages 1575-1580
Effect of Quenching Wait Time on Microstructure and Mechanical Properties of As-Extruded AA6063 Alloy....Pages 1581-1585
Hot Deformation Behavior and Microstructural Evolution of Homogenized 7150 Aluminum Alloys Micro-Alloyed with Zr and V....Pages 1587-1592
Orientation Effect in the Particle Stimulated Nucleation of Recrystallization....Pages 1593-1598
Structual Evolution in Aluminium Alloy AA6082 during HPT Deformation at Increased Temperature....Pages 1599-1605
Advances in Aluminum Mold Block for Plastic Injection Molding Operations....Pages 1607-1612
Metalworking of a Spherical Particle Reinforced Aluminum Composite....Pages 1613-1620
Properties, Microstructure and Hot Deformation Behaviour of Different Al-Zn-Mg (Zr) Alloys....Pages 1621-1627
Super High Strength Aluminum Alloy Processed by Mechanical Alloying and Hot Extrusion....Pages 1629-1634
A system for Continuous Extrusion Using High Pressure Molten Metal....Pages 1635-1641
Visualization of Material Flow in Friction Extrusion....Pages 1643-1648
High-Pressure Torsion for Microstructure Control in Binary Al-Fe Alloys with Different States of Fe-Containing Phases....Pages 1649-1658
Process analysis of the co-extrusion of aluminum and titanium alloys....Pages 1659-1664
Rheo-Extrusion of Hypoeutectic Al-Si-Mg-Fe Alloy....Pages 1665-1670
Simultaneous Improvement of Strength and Ductility in Al-Ag Alloys Processed by High-Pressure Torsion and Aging....Pages 1671-1677
Microstructural and mechanical evolutions during the forging step of the COBAPRESS, a casting/forging process....Pages 1679-1684
The Bonding Behavior of co-extruded Aluminum-Titanium-Compounds....Pages 1685-1690
The Effect of Heat Treatment Technology on Mechanical Properties of Al/Al Alloys Multilayer Sheet Fabricated by Hot Roll Bonding....Pages 1691-1696
Orientation Dependent Subgrain Growth During Isothermal Annealing of High-Purity Aluminum....Pages 1697-1703
Effect of Nickel Variation and Thermomechanical Treatment on Microstructure and Properties in Aluminum Alloy Fin Stock for Heat Exchanger....Pages 1705-1711
A study of the influence of plastic pre strain in different directions before ageing of extruded and hydro formed material on the mechanical properties of AA6063....Pages 1713-1718
Characterization of the Artificial Aging Behavior and Formability of a High Strength EN AW-6016 at Different Heat Treatment Conditions Used for Automotive Applications....Pages 1719-1725
Low Work Hardening and Its Mitigation in Ultra-Fine Grained Aluminum Alloys....Pages 1727-1733
The Influence of Initial Microstructure on the Recrystallization Behaviour of Cold-Rolled AA3003....Pages 1735-1740
Mechanical Properties of Multilayer 1100/7075 Aluminum Sheet Produced by Hot ARB....Pages 1741-1745
Examining the Mechanisms of Dynamic Recrystallization (DRX) in Two-Phase Al Alloys....Pages 1747-1752
Mechanical Characterization of Bimodal Grain Size Aluminum 5083 Under Various Test Conditions....Pages 1753-1760
Microstructure and Mechanical Properties of an Al-Mg-Sc-Zr Alloy Subjected to Extensive Cold Rolling....Pages 1761-1766
Microstructure, Mechanical and Electrical Properties Evolution During Cold Rolling of Different 1xxx Series Aluminium After Continuous Casting....Pages 1767-1771
Modeling of Work-Hardening in an Age-Hardenable AA7108 Aluminum Alloy....Pages 1773-1778
A Study of the Influence of Strain Hardening and Precipitation Hardening Sequence on Mechanical Properties of AlMgSi Conductor Alloys....Pages 1779-1784
Characterization of Pre-Aged AA6061-T6 Sheet Material for Aerospace Applications....Pages 1785-1790
Controlled Quenching of Aluminum Alloys in Flexible Spray Fields....Pages 1791-1796
Effect of Coarse Particles on Work Hardening in the Al-Mn Alloy....Pages 1797-1802
Precipitation behavior of dispersoids in Al-Mg-Si-Cu-Mn-Cr alloy during homogenization annealing....Pages 1803-1809
Effect of Si Addition on Solid Solution Hardening of Al-Mn Alloys....Pages 1811-1816
Effects of Deformation Texture Intensities and Precipitates on the Anisotropy of Mechanical Properties of Al-Li Alloy 2099 T83 Extrusions....Pages 1817-1824
Evolution in Microchemistry and its Effects on Deformation and Annealing Behavior of an AlMnFeSi Alloy....Pages 1825-1829
Influence of Process Fluctuations on Weld Seam Properties in Aluminum Alloy Extrusion....Pages 1831-1836
Evolution of Fragmented Fe-Intermetallic Compounds in the Semi-Solid State of Al-Mg-Si-Fe Alloys by Deformation Semi-Solid Forming Process....Pages 1837-1842
Identification and Distribution of Fe Intermetallic Phases in AA 5657 DC Cast Ingots....Pages 1843-1850
Microstructure and Mechanical Properties of AA2195 DC Cast Ingot Plates....Pages 1851-1856
Threshold Deformation for Exhibiting the Hardening on Annealing Behaviour in AA3103 Alloy....Pages 1857-1863
A Study of the Microstructure, Crystallographic Texture, and Recrystallization in AA4006 Alloy Strips Produced by Twin Roll Caster and Direct Chill Processes....Pages 1865-1871
Effect of Extensive Rolling on Mechanical Properties of An Al-Mg-Sc Alloy....Pages 1873-1878
The Effects of Transition Elements on the Control of Recrystallization of Al-Zn-Mg Extrusion....Pages 1881-1890
Back Matter....Pages 1891-1896
....Pages 1897-1902