Frontiers in Civil and Hydraulic Engineering, Volume 1: Proceedings of the 8th International Conference on Architectural, Civil and Hydraulic Engineering (ICACHE 2022), Guangzhou, China, 12–14 August 2022

Cover
Title Page
Copyright
Table of contents
Preface
Committee members
Structural seismic technology and risk assessment monitoring
	Calculation and study of the stability of oblique under-crossing tunnels
		1 INTRODUCTION
		2 ENGINEERING SITUATIONS
		3 LOADS AND LOAD COMBINATIONS
		4 SETTLEMENT DISPLACEMENT SIMULATION DURING THE CONSTRUCTIONSTAGE
		5 CALCULATION RESULTS OF SECONDARY LINING OF MAIN TUNNEL IN USINGSTAGE
		6 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Study on monitoring and early warning technology of road slope deformation
		1 INTRODUCTION
		2 METHODS
		3 RESULTS
		4 CONCLUSION AND DISCUSSION
		ACKNOWLEDGEMENTS
		REFERENCES
	FRP constraint steel UHPC composite column bending bearing capacity analysis
		1 INTRODUCTION
		2 COMPUTATIONAL ASSUMPTIONS AND CONSTITUTIVE RELATION
		3 FOR CALCULATING THE ULTIMATE BEARING CAPACITY FOR BENDING
		4 CONCLUSION
		REFERENCES
	Study on the influence of spatial variability of tensile strength on ground settlement
		1 INTRODUCTION
		2 GENERATION OF THE RANDOM FIELD
		3 NUMERICAL MODEL
		4 ANALYSIS OF SIMULATION RESULTS
		5 CONCLUSIONS
		ACKNOWLEDGEMENT
		REFERENCES
	Research on the structural deformation law of subway station induced by difference of foundation bearing capacity
		1 INTRODUCTION
		2 NUMERICAL COMPUTATIONAL MODELS AND ANALYSIS METHODS
		3 ANALYSIS OF NUMERICAL CALCULATION RESULTS
		4 CONCLUSIONS
		REFERENCES
	Finite element dynamic analysis of a new prefabricated anti-collision wall
		1 INTRODUCTION
		2 ENGINEERING CONDITIONS
		3 NUMERICAL ANALYSIS MODEL OF ANTI-COLLISIONWALL
		4 MODELLING ASPECTS
		5 WORKING CONDITIONS
		6 ANALYSIS OF INFLUENCING FACTORS
		7 WELDING STRESS
		8 CONCLUSIONS
		REFERENCES
	Research on hot spots of drag reduction and vibration reduction of cylinder flow based on CiteSpace
		1 INTRODUCTION
		2 LITERATURE CHARACTERISTICS OF DRAG REDUCTION AND VIBRATIONREDUCTION AROUND CYLINDER
		3 RESEARCH TRENDS AND PROSPECTS
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Application analysis of extrusion and expanded pile in electric power engineering
		1 INTRODUCTION
		2 ANALYSIS OF LOAD-BEARING APPLICATION OF SQUEEZE-EXPANDED DISKPILES IN POWER ENGINEERING
		3 CONTRASTIVE ANALYSIS OF BEARING PERFORMANCE OF STRAIGHT PILE ANDEXTRUSION-EXPANDED DISK PILE
		4 LOAD TRANSFER MECHANISM OF SQUEEZED AND EXPANDED DISK PILE
		5 CONCLUSIONS
		REFERENCES
	Analysis of ultimate bearing capacity of prestressed concrete box Girder Bridge
		1 INTRODUCTION
		2 SPACE STRESS CHARACTERISTICS OF CONCRETE BOX GIRDER BRIDGE
		3 ULTIMATE BEARING CAPACITY OF BOX SECTION UNDER ASYMMETRIC LOAD
		4 BRIDGE CASE VERIFICATION
		5 CONCLUSION
		REFERENCES
	Research on the blast and impact resistance of FRP panels
		1 INTRODUCTION
		2 STUDY ON EXPLOSION/IMPACT RESISTANCE OF PURE FRP PLATE
		3 STUDY ON EXPLOSION/IMPACT RESISTANCE OF FRP COMPOSITE PLATE
		4 EXPERIMENTAL RESEARCH METHOD
		5 NUMERICAL SIMULATION STUDY
		6 SUMMARY OF NATIONAL NORMS
		7 CONCLUSIONS
		REFERENCES
	Research and application of adaptive bentonite waterproof blanket
		1 GENERAL INSTRUCTION
		2 RESEARCH PROGRESS OF BENTONITEWATERPROOF BLANKET AT HOME ANDABROAD
		3 APPLICATION OF BENTONITEWATERPROOF BLANKET AT HOME AND ABROAD
		4 IMPROVED BENTONITE TECHNOLOGY
		5 RESEARCH ON IMPROVED BENTONITEWATERPROOF BLANKET TECHNOLOGY
		6 CONCLUSIONS
		ACKNOWLEDGMENTS
		REFERENCES
	Analysis of traveling wave effect on the seismic response of the spatial cable surface suspension bridge
		1 INTRODUCTION
		2 BASIC PRINCIPLES OF DYNAMIC RESPONSE ANALYSIS METHODS
		3 FINITE ELEMENT MODELING AND SEISMICWAVE SELECTION
		4 ANALYSIS OF LONGITUDINAL SEISMIC TRAVELINGWAVE EFFECTS
		5 CONCLUSIONS
		REFERENCES
	Research on the application of enabling technology for river basin hydro-junctions operation safety monitoring system
		1 INTRODUCTION
		2 MONITORING SYSTEM AND ITS ENABLING TECHNICAL ARCHITECTURE
		3 ENABLING TECHNOLOGIES AND THEIR APPLICATIONS
		4 CONCLUSIONS
		REFERENCES
	Risk assessment method for subway-crossing shield tunnel based on ground loss ratio
		1 INTRODUCTION
		2 PROJECT OVERVIEW
		3 RISK ASSESSMENT METHOD FOR SUBWAY-CROSSING SHIELD TUNNEL
		4 CASE STUDY
		5 CONCLUSION
		REFERENCES
	Application of steel strand tension technology in the construction of bridge bearing platform
		1 INSTRUCTION
		2 PROJECT OVERVIEW
		3 PROCESS OPTIMIZATION OF BEARING PLATFORM PULL ROD
		4 CHECKING CALCULATION OF FORCE AND ELONGATION OF PULL ROD
		5 ECONOMIC COMPARISON AND SELECTION
		6 CONCLUSION
		REFERENCES
	Research on the influence of foundation pit excavation on upper span tunnel
		1 INTRODUCTION
		2 ENGINEERING BACKGROUND
		3 PLAXIS 2D FINITE ELEMENT CALCULATION RESULTS AND ANALYSIS
		4 CONCLUSION
		REFERENCES
	Three-dimensional finite element analysis of the influence of graded slope excavation on the adjacent existing diversion tunnel
		1 INTRODUCTION
		2 PROJECT OVERVIEW
		3 THREE-DIMENSIONAL FINITE ELEMENT MODEL AND PARAMETERS
		4 FINITE ELEMENT ANALYSIS
		5 CONCLUSION
		REFERENCES
	Traffic noise monitoring and sensitivity modeling of control measures for a highway service area
		1 INTRODUCTION
		2 METHODOLOGY
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Effects of the installation parameters on the compressive performance of helix stiffened composite piles in soft clay
		1 INSTRUCTION
		2 TEST OVERVIEW
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		ACKNOWLEDGEMENTS
		REFERENCES
	Simulation analysis of waterlogging in mountain city
		1 INTRODUCTION
		2 MODEL BUILDING
		3 RESULTS ANALYSIS
		4 CONCLUSIONS
		REFERENCES
	Treatment technology and effect analysis of highway tunnel collapse in rich-water and soft surrounding rock
		1 INTRODUCTION
		2 RESEARCH BACKGROUND
		3 OVERVIEW OF TUNNEL COLLAPSE
		4 TUNNEL COLLAPSE TREATMENT PLAN
		5 EFFECT ANALYSIS
		6 CONCLUSION
		REFERENCES
	Influences of sluice foundation pit excavation based on monitoring and numerical analysis
		1 INSTRUCTIONS
		2 PROJECT OVERVIEW
		3 MONITORING DATA ANALYSIS
		4 FINITE ELEMENT SIMULATION
		5 CONCLUSION
		ACKNOWLEDGEMENTS
		REFERENCES
	Optimization of acoustic transit-time flowmeters installed in short converging intakes of a pump station
		1 INTRODUCTION
		2 MODEL SET-UP
		3 NUMERICAL SIMULATION RESULTS
		4 FLOW RATE CALCULATION
		5 DISCUSSION
		6 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	A safety analysis of temporary anchor-tension system for immersed tube in the Shenzhen-Zhongshan link
		1 INTRODUCTION
		2 PROJECT OVERVIEW
		3 LAYOUT OF TEMPORARY ANCHOR-TENSION SYSTEM
		4 TEST LOADING
		5 CONCLUSIONS
		ACKNOWLEDGMENTS
		REFERENCES
	A Geofencing-based dynamic supervision technology for highway engineering construction site
		1 INTRODUCTION
		2 DESIGN OF THE DYNAMIC SUPERVISION TECHNOLOGY
		3 PERSONNEL ANDWORKPLACE MAPPING DATABASE
		4 GEOFENCING-BASED DYNAMIC SUPERVISION TECHNOLOGY
		5 APPLICATION SCENARIOS
		6 CONCLUSION
		REFERENCES
	Research on the function-oriented method for delimiting coastal setback lines in China
		1 INTRODUCTION
		2 INNOVATIVE ELEMENT OF COASTAL ZONE SETBACK LINE DELINEATIONMETHOD
		3 CLASSIFICATION OF COASTAL ZONE USES AND FUNCTIONS
		4 DELINEATION METHOD OF COASTAL SETBACK LINE BASED ON FUNCTIONALUSE CLASSIFICATION
		5 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Natural vibration characteristics and stability analysis of radial steel gate
		1 INTRODUCTION
		2 RADIAL STEEL GATE MODEL
		3 NATURAL VIBRATION CHARACTERISTICS OF THE ARC GATE
		4 STABILITY ANALYSIS OF RADIAL STEEL GATE
		5 CONCLUSION
		REFERENCES
	Short-term prediction of runoff based on wavelet noise reduction and LightGBM coupling
		1 INTRODUCTION
		2 WAVELET NOISE REDUCTION
		3 LIGHTGBM TIME SERIES PREDICTION
		4 CASE STUDY
		5 CONCLUSIONS
		ACKNOWLEDGMENT
		REFERENCES
	Research on construction monitoring technology of suspended shape up-stiffened steel truss bridge based on incremental launching
		1 INTRODUCTION
		2 PROJECT SUMMARY
		3 FINITE ELEMENT SIMULATION
		4 MONITORING DURING CONSTRUCTION
		5 CONCLUSION
		REFERENCES
	Influence of central buckle on static and dynamic performance of super-span suspension bridge
		1 INSTRUCTIONS
		2 ENGINEERING BACKGROUND AND ANALYSIS MODEL
		3 INFLUENCE OF CENTRAL BUCKLE PARAMETERS ON THE STATIC AND DYNAMICPERFORMANCE OF THE STRUCTURE
		4 CONCLUSION
		REFERENCES
	Passive cooling measures—the thermosyphon embankment techniques of roads on plateau permafrost
		1 GENERAL INTRODUCTIONS
		2 ENGINEERING PROBLEMS ROSE IN PERMAFROST CONSTRUCTION
		3 THE EFFICIENT COOLING EFFECT OF THERMOSYPHON
		4 COMBINATION OF VARIOUS COOLING TECHNIQUES
		5 THERMOSYPHON EMBANKMENT IMPROVEMENTS
		6 CONCLUSION
		REFERENCES
	Research on compaction quality monitoring technology of the embankment based on continuous compaction indices
		1 INTRODUCTION
		2 CONTINUOUS COMPACTION INDICES CMV AND VCV
		3 ROLLING EXPERIMENT OF THE EMBANKMENT
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Design and practice of deformation monitoring of seawall during construction
		1 INTRODUCTION
		2 MONITORING CONTENT
		3 SECTION LAYOUT
		4 INSTALLATION AND COLLECTION
		5 DEFORMATION ANALYSIS
		6 PREDICTION OF SETTLEMENT DEFORMATION OF SEAWALL
		7 CONCLUSIONS
		REFERENCES
	Crack control of hydraulic dam mass concrete pouring based on image feature
		1 INTRODUCTION
		2 STUDY ON A CRACK CONTROL METHOD OF MASS CONCRETE POURING
		3 EXPERIMENTAL ANALYSIS
		4 CONCLUSION
		REFERENCES
Smart city construction and resource sustainability
	Research on key technologies of intelligent site management platform
		1 GENERAL INSTRUCTIONS
		2 DATA ANALYSIS TECHNOLOGY BASED ON-SITE MANAGEMENT PLATFORM
		3 DATA ANALYSIS PROCESS
		4 ADVANTAGES OF INTELLIGENT SITE MANAGEMENT SYSTEM
		5 CONCLUSION
		REFERENCES
	Optimization of building design and contribution to sustainable development
		1 INTRODUCTION
		2 METHODOLOGY
		3 EXPERIMENTS AND NUMERICAL RESULTS
		4 CONCLUSIONS
		REFERENCES
	Reconstruction technology of residential ecological architecture in China Zhuang nationality
		1 INTRODUCTIONS
		2 ECOLOGICAL ARCHITECTURES AND THE STYLE AND CHARACTERISTICS OFCHINESE ZHUANG NATIONALITY FOLK DWELLINGS
		3 RECONSTRUCTION TECHNOLOGY OF RESIDENTIAL ECOLOGICALARCHITECTURE IN CHINA ZHUANG NATIONALITY
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Advancements in super cool roofs
		1 INTRODUCTION
		2 SUPER COOL ROOF
		3 CONCLUSION
		REFERENCES
	Visual analysis of flood control and drainage texts based on CiteSpace
		1 INTRODUCTION
		2 RESEARCH METHOD
		3 RESULTS AND ANALYSIS
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Energy saving test and analysis of rural traditional residence in cold region of China
		1 INTRODUCTION
		2 EXPERIMENTS ON THE RESIDENCE
		3 BUILDING ENERGY DISSIPATION ANALYSIS
		4 ENERGY-SAVING SCHEME
		5 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Discussion on the application of green and low-carbon concept in large-scale complex buildings
		1 INTRODUCTION
		2 DISCUSSION ON THE APPLICATION OF GREEN AND LOW-CARBON CONCEPTS INLARGE-SCALE COMPLEX BUILDINGS
		3 RESEARCH AND DESIGN EXPERIMENTS BASED ON THE APPLICATION OFGREEN AND LOW-CARBON CONCEPTS IN LARGE-SCALE COMPLEXBUILDINGS
		4 EXPERIMENTAL ANALYSIS BASED ON THE APPLICATION OF GREEN ANDLOW-CARBON CONCEPTS IN LARGE-SCALE COMPLEX BUILDINGS
		5 CONCLUSIONS
		REFERENCES
Author index