Energy Technology 2020: Recycling, Carbon Dioxide Management, and Other Technologies (The Minerals, Metals & Materials Series)

Preface
Contents
About the Editors
Part I  Energy Technologies and CO₂ Management Symposium
1  The Impact of Solar Resource Characteristics on Solar Thermal Pre-heating of Manganese Ores
2  The Compatibility of Metallic Thermal Storage Materials and Housing Materials: A Computational Survey and Accelerated Reaction Experiments
3  Effect of Fly Ash from Coal-fired Boiler on Heat Transfer Efficiency
4  Optimization and Management of On-Site Power Plants Under Time-of-Use Power Price: A Case Study in Steel Mill
5  Economic Metals Rescue from Spent Zinc–Carbon Batteries for Industrial Value Additions
6  Characterization of the Hot-Pressed Coal Briquettes Prepared with the HyperCoal
7  The Co-extraction of Low-Rank Coal and Biomass by Polar Solvent at Mild Conditions
8  Discussion on the Application of Rooftop Photovoltaic Power Plant in the Steel Enterprise
9  Performance of Anodes with Proper Active Metal Elements Added to the Al–0.16wt%In in Alkaline Electrolyte for Al-Air Batteries
10  Theoretical and Experimental Research on the Mass Changes of Elements in Molten Steel with CO₂ Used as RH Lifting Gas
11  Hydrogen as a Fuel and Ramifications
12  Applying Biochar Composite Briquette for Energy Saving in Blast Furnace Ironmaking
13  Properties and Microstructure of Copper and/or Nickel Supported on GO, rGO, and NGO
14  Investigation of H₂ Addition Effects on CO/CO₂/H₂-Air Flames by a Combustion Diagnostic System Based on TDLAS
15  MnOx-Decorated Fe–Zr-Based Nano-Catalysts for Low-Temperature  NH₃-SCR: Improvement of Catalytic Activity
Part II  Recycling of Secondary, Byproduct Materials and Energy
16  Toward 100% Recycling of Steelmaking Offgas Solid Wastes by Reallocating Zinc-bearing Materials
17  Granulation and Carbonization Process of Titanium-Bearing Blast Furnace Slag
18  Study on Cracking Control of Cold Bonded Pellets Containing Converter Dust Based on Nonhydraulic Hardening Principle
19  Experimentation, Modeling, and Optimum Conditions of Pyro-Hydrometallurgical-Precipitation Reaction Technology for Recovery of Copper as Oxide of Nanoparticles from a Copper Dust
20  Recovery Nickel-Ferrous Compound from Nickel-Bearing Secondary Resources
21  Extraction and Processing of Crystalline Metallurgical-Grade Silicon Prepared from Rice Husk Byproduct
22  Separation and Recovery of Copper from Copper-Bearing Pyrite Cinder via an Acid Leaching Process
23  A Recycling System for Sustainable Management of Waste Solar Photovoltaic Panels in Taiwan
24  Controllable Synthesis of Battery-Grade Iron Oxalate with Waste Ferrous Sulfate from Titanium Dioxide Production
25  Mechanical Beneficiation of End-of-Life Lithium-Ion Battery Components
26  Assessing the Techno-Economic Feasibility of Solvent-Based, Critical Material Recovery from Uncertain, End-of-Life Battery Feedstock
27  Thermodynamic Analysis and Reduction of Anosovite with Methane at Low Temperature
28  Recovering Plastics from Electronics Waste
29  Additive Manufacturing via the Direct Ink Writing Technique of Kaolinite-Based Clay with Electric Arc Furnace Steel Dust (EAF Dust)
30  Characterization of Wasted LEDs from Tubular Lamps Focused on Recycling Process by Hydrometallurgy
31  Comprehensive Utilization of Vanadium Extraction Tailings: A Brief Review
32  Crystallization and Carbonization of TiO₂–CaO–SiO₂ Ternary Slag
33  Gravity Separation of Zinc Mine Tailing Using Wilfley Shaking Table to Concentrate Hematite
34  Minimization of Copper Contamination in Steel Scrap
35  Recycling of Blast Furnace Flue Dust with In-flight Reduction Technology: Reduction Behavior and Kinetic Analysis
36  Recycling Technologies of Zn–C Batteries: Review and Challenges for a Circular Economy in Colombia
37  Selective Recovery of Lithium from Ternary Spent Lithium-Ion Batteries Using Sulfate Roasting-Water Leaching Process
38  Separation and Recovery of Zinc and Cobalt from Zinc Plant Residue by Alkali Leaching
39  Study on Mineral Phase Composition and Viscosity of Hot Metal Pretreatment Desulfurization Slag Based on FactSage
40  Study on Oxidation Roasting Process of Cathode Sheets from Spent Lithium Ion Batteries
Author Index
Subject Index