Energy Revolution and Chemical Research: Proceedings of the 8th International Conference on Energy Science and Chemical Engineering (ICESCE 2022), Zhangjiajie, China, 22–24 April 2022

Cover
Title Page
Copyright Page
Table of contents
Preface
Committee members
Energy development and utilization and green environmental protection and energy saving
	Research on energy-saving technologies and countermeasures for public buildings
		1 INTRODUCTION
		2 ENERGY CONSUMPTION ANALYSIS
		3 ENERGY-SAVING APPLICATIONS IN PUBLIC BUILDINGS
		4 PROBLEM ANALYSIS
		5 ENERGY-SAVING MEASURES AND SUGGESTIONS
		6 SIGNIFICANCE
		7 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Energy consumption and carbon emission study of heat pumps with different working fluids for residential buildings heating
		1 INTRODUCTION
		2 DESCRIPTION OF SYSTEM
		3 MATHEMATICAL MODELING
		4 RESULTS AND DISCUSSION
		5 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Research on the equilibrium of carbon trading income under the “source-load” scenario incorporated into the aggregator
		1 INTRODUCTION
		2 CARBON ALLOWANCE TRADING UNDER THE “SOURCE-LOAD” SCENARIO THATINCORPORATES AGGREGATORS
		3 CALCULATION MODEL OF CARBON QUOTA FOR ENTERPRISE CLUSTER NODESAND AGGREGATOR NODES
		4 ENTERPRISE CLUSTER, AGGREGATOR NODE COST AND PROFIT CALCULATIONMODEL
		5 CONCLUSIONS
		ACKNOWLEDGMENT
		REFERENCES
	Experimental research on the effects of different aquatic plants
and their combinations on the removal of nitrogen and phosphorus
in polluted water in the Poyang Lake area
		1 INTRODUCTION
		2 MATERIALS AND METHODS
		3 TEST RESULTS AND DISCUSSIONS
		4 CONCLUSIONS
		ACKNOWLEDGMENTS
		REFERENCES
	Research on the application of interception engineering in the treatment of blue algae in South Taihu Lake
		1 INTRODUCTION
		2 MATERIALS AND METHODS
		3 RESULTS AND ANALYSIS
		4 DISCUSSION
		5 CONCLUSIONS
		REFERENCES
	Research on evaluation of green energy transformation in China
		1 INTRODUCTION
		2 CONSTRUCTION OF INDEX SYSTEM
		3 COMPREHENSIVE EVALUATION METHOD
		4 ANALYSIS OF EVALUATION RESULTS
		5 CONCLUSIONS
		ACKNOWLEDGMENTS
		REFERENCES
	Mathematical modeling and capacity configuration of heating system in high altitude area
		1 INTRODUCTION
		2 MODEL INTRODUCTION
		3 TEST RESULTS AND DISCUSSIONS
		4 CONCLUSIONS
		ACKNOWLEDGMENTS
		REFERENCES
	Study on power grid maintenance and operation cost based on combined weight TOPSIS model
		1 INTRODUCTION
		2 CONSTRUCTION OF EVALUATION INDEX SYSTEM FOR POWER GRIDMAINTENANCE AND OPERATION COSTS
		3 CONSTRUCTION OF THE COST AND EFFICIENCY EVALUATION MODEL OFPOWER GRID MAINTENANCE AND OPERATION
		4 EMPIRICAL ANALYSIS
		5 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Analysis of runoff characteristics of non-point source pollutants of different land use types inYinma River Basin
		1 INTRODUCTION
		2 RESEARCH METHODS
		3 ANALYSIS OF RUNOFF CHARACTERISTICS OF NON-POINTSOURCE POLLUTANTS
		4 CONCLUSIONS
		REFERENCES
	Analysis and discussion of “zero discharge” technology for high saline wastewater
		1 INTRODUCTION
		2 TRADITIONAL “ZERO-EMISSION” PROCESS
		3 SALT SEPARATION PROCESS
		4 CONCLUSION
		REFERENCES
	Research on the implementation path of building a green and low-carbon port
		1 INTRODUCTION
		2 CONSTRUCTION OF ZERO-CARBON PORTS AT HOME AND ABROAD
		3 EXPLORATION OF THE IMPLEMENTATION PATH OF BUILDING A GREEN ANDLOW-CARBON PORT
		4 CONCLUSIONS
		ACKNOWLEDGMENTS
		REFERENCES
	A brief review of thermal management technologies for new energy vehicles
		1 INTRODUCTION
		2 COMPONENTS THERMAL REQUIRES
		3 CURRENT SITUATION OF THERMAL MANAGEMENT TECHNOLOGIES
		4 CONCLUSIONS
		REFERENCES
	Simulation study on minimum spatial relation of electric field for sensor size
		1 INTRODUCTION
		2 CALCULATION AND MEASUREMENT OF ELECTRIC FIELD STRENGTH
		3 SIMULATION METHOD AND MODEL
		4 SIMULATION RESULT
		5 ANALYSIS OF SIMULATION RESULTS
		6 CONCLUSIONS
		REFERENCES
	Analysis and research on the influencing factors and influencing
mechanism of environmental protection facilities in power
transmission and transformation project
		1 INTRODUCTION
		2 A FISHBONE DIAGRAM ANALYSIS OF THE INFLUENCING FACTORS OF THE COSTOF ENVIRONMENTAL PROTECTION FACILITIES IN TRANSMISSION ANDTRANSFORMATION PROJECTS
		3 STUDY ON THE INFLUENCE MECHANISM OF ENVIRONMENTAL PROTECTIONFACILITIES IN POWER TRANSMISSION AND TRANSFORMATION PROJECTSBASED ON PRINCIPAL COMPONENT ANALYSIS
		4 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Research on the prediction of power energy consumption of campus buildings with ARMA model
		1 INTRODUCTION
		2 PREDICTION METHOD
		3 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Asteroid mining predictions based on logit model
		1 INTRODUCTION
		2 GLOBAL EQUITY
		3 ASTEROID MINING
		4 CONCLUSION
		REFERENCES
	Shale gas development area optimization model based on order relation – TOPSIS method
		1 INTRODUCTION
		2 ESTABLISHMENT OF EVALUATION INDEX
		3 THEORETICAL METHOD AND MODEL
		4 CASE APPLICATION AND ANALYSIS
		5 CONCLUSIONS
		ACKNOWLEDGMENT
		REFERENCES
	Design of clearing mechanism for renewable energy in spot market
		1 INSTRUCTIONS
		2 DESIGN OF SPOT MARKET MECHANISM
		4 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	A rapid calculation method of the cost of temporary power supply
project based on modular technology: A case study of the 2022
BeijingWinter Olympic Games
		1 INTRODUCTION
		2 ANALYSIS OF THE COST COMPONENTS OF TEMPORARY POWER SUPPLYPROJECTS FOR THE WINTER OLYMPIC GAMES
		3 RAPID CALCULATION METHOD OF THE COST OF TEMPORARY POWER SUPPLYPROJECT BASED ON MODULAR TECHNOLOGY
		5 CONCLUSION
		REFERENCES
	Analysis of the distribution characteristics of audible noise
of UHV AC transmission lines
		1 INTRODUCTION
		2 AUDIBLE NOISE EVALUATION CRITERIA AND CONTROL VALUES
		3 HUM MEASUREMENT
		4 ANALYSIS OF PROPAGATION LAW OF AUDIBLE NOISE
		5 CONCLUSIONS
		REFERENCES
	Research on energy efficiency evaluation model in typical energy system scenario
		1 INTRODUCTION
		2 ENERGY EFFICIENCY EVALUATION MODELS FOR ENERGY SYSTEMS
		3 CASE STUDIES OF ENERGY EFFICIENCY EVALUATION AND ENERGYEFFICIENCY ANALYSIS UNDER TYPICAL SCENARIOS
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Analysis and countermeasures of safety management of crude oil transfer in Ningbo Port
		1 INTRODUCTION
		2 SAFETY MANAGEMENT OF LIGHTERING OPERATIONS OF CRUDE OIL INNINGBO PORT
		3 EXISTING PROBLEMS AND COUNTERMEASURES
		4 CONCLUSION
		REFERENCES
	Cost assessment of clean energy in a country in Northeast Asia based on LOCE model
		1 INTRODUCTION
		2 LEVELISED COST OF ELECTRICITY (LCOE) MODEL
		3 CLEAN ENERGY LOCE ASSESSMENT FOR A COUNTRYIN NORTH-EAST ASIA
		4 CONCLUSIONS
		REFERENCES
	Research and practice of tank risk management based on tank overhaul data statistics
		1 INTRODUCTION
		2 TANK RISK FACTOR ANALYSIS BASED ON TANK OVERHAULDATA STATISTICS
		3 TANK RISK ASSESSMENT BASED ON TANK OVERHAUL DATA STATISTICS
		4 MITIGATION MEASURES
		5 CONCLUSION
		REFERENCES
	Research on the development of environmental energy efficiency in Liaoning province under the goal of carbon neutralization
		1 INTRODUCTION
		2 CARBON NEUTRALITY AND ENVIRONMENTAL ENERGY PROFILE
		3 CORRELATION ANALYSIS BETWEEN CARBON NEUTRALITYAND ENVIRONMENTAL ENERGY ISSUES
		4 CONCLUSIONS AND COUNTERMEASURES
		REFERENCES
	Practice of underbalanced drilling technology in oilfield
		1 GENERAL INSTRUCTIONS
		2 ADVANTAGES AND DISADVANTAGES OF UNDERBALANCED DRILLING
		3 KEY TECHNOLOGIES OF UNDERBALANCED DRILLING
		4 KEY EXAMPLES OF UNDERBALANCED DRILLING
		5 CONCLUSIONS
		REFERENCES
	Hydrocarbon accumulation environment and geological resource potential in jizhong depression
		1 GENERAL INSTRUCTIONS
		2 ACCUMULATION MODE
		3 MAIN CONTROLLING FACTORS OF HYDROCARBON ACCUMULATION
		4 CONCLUSIONS
		REFERENCES
	Research on environmental impact assessment and ecological protection in hydropower planning
		1 INTRODUCTION
		2 SELECTION OF EVALUATION INDICATORS SYSTEM
		3 DETERMINATION OF THE WEIGHTING OF EVALUATION INDICATORS
		5 CONCLUSION
		4 ECOLOGICAL PROTECTION MEASURES
		REFERENCES
	Evaluation of national rainwater development and utilization potential based on Geoclimatic zoning
		1 INTRODUCTION
		2 PRINCIPLE AND FRAMEWORK OF RAINWATER HARVESTINGAND UTILIZATION AREA DIVISION
		3 BASIC CONCEPT AND POTENTIAL EVALUATION METHOD FOR RAINWATERDEVELOPMENT AND UTILIZATION
		4 RESULTS OF RAINWATER HARVESTING AND UTILIZATION ZONING ANDPOTENTIAL EVALUATION
		5 CONCLUSIONS AND RECOMMENDATIONS
		ACKNOWLEDGMENT
		REFERENCES
	Research on calculation method of construction management cost
based on improved technique for order preference by similarity
to an ideal solution
		1 INTRODUCTION
		2 ANALYSIS OF PARTICIPANTS IN PROJECT CONSTRUCTION MANAGEMENT
		3 APPLICABILITY ANALYSIS OF EXISTING COST CALCULATION METHODS
		4 COST CALCULATION METHOD BASED ON TOPSIS METHOD
		5 CONCLUSION
		REFERENCES
	Development of an egg incubator with PID closed-loop control
		1 INTRODUCTION
		2 BASIC IDEA OF THE PROJECT
		3 RESEARCH ON THE CONTROL ALGORITHM OF HUMIDITY AND TEMPERATUREREGULATION
		4 SCIENTIFIC AND APPLICATION PROSPECTS
		5 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Annual publication trend and reference co-citation analyses of hydrogen safety-related publications
		1 INTRODUCTION
		2 DATA AND METHODS
		4 CONCLUSIONS
		ACKNOWLEDGMENTS
		REFERENCES
	Investigations and considerations of the current energy development in Zhejiang province
		1 INTRODUCTION
		2 CURRENT ENERGY SITUATION
		3 ENERGY CHALLENGES
		4 CONCLUSIONS
		ACKNOWLEDGMENTS
		REFERENCES
	Variation characteristics of meteorological drought in Taihu Lake Basin from 1981 to 2016
		1 INTRODUCTION
		2 STUDY AREA AND DATA
		3 METHOD
		4 RESULTS DISCUSSION AND ANALYSIS
		5 CONCLUSIONS
		ACKNOWLEDGMENT
		REFERENCES
	Evaluation index system and evaluation method for multi-energy systems
		1 INTRODUCTION
		2 EVALUATION INDEX SYSTEM OF MULTI-ENERGY SYSTEMS
		3 EVALUATION METHOD FOR MULTI-ENERGY SYSTEMS
		4 CASE STUDY
		5 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Application of horizontal subsurface flow constructed wetland in initial rainwater treatment
		1 INTRODUCTION
		2 CONSTRUCTED WETLAND
		3 PROJECT OVERVIEW
		4 DESIGN AND IMPLEMENTATION OF WETLANDS
		5 ANALYSIS OF WETLANDWATER PURIFICATION EFFECT
		6 CONCLUSIONS
		REFERENCES
	Numerical analysis of water environment improvement of
river and lake based on two-dimensional flow dynamics
and numerical simulation
		1 INTRODUCTION
		2 ESTABLISHMENT AND VERIFICATION OF PLANE 2DWATER ENVIRONMENTMATHEMATICAL MODEL
		3 IMPACT OF RIVER LAKE CONNECTION PROJECT ONWATER QUALITY OF BAIMALAKE
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
Research on energy chemical properties and material structure
	Study on detoxification property of H2O2 decontaminants against GD under subzero environment
		1 INTRODUCTION
		2 EXPERIMENTAL
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		REFERENCES
	Experimental investigation on pyrolysis and combustion of sewage
sludge: Pyrolysis and combustion characteristics, product
characteristics
		1 INTRODUCTION
		2 EXPERIMENTAL SAMPLES AND METHODS
		3 RESULT AND DISCUSSION
		4 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Effect of different aeration levels on the wastewater treatment
performance of an externally circulating electrically enhanced
bioreactor
		1 INTRODUCTION
		2 MATERIALS AND METHODS
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Effect of different aeration levels on the wastewater treatment
performance of an externally circulating electrically enhanced
bioreactor
		1 INTRODUCTION
		2 MODEL DESCRIPTION
		3 NUMERICAL METHODS AND VALIDATION
		5 CONCLUSIONS
		REFERENCES
	Study on pyrolysis characteristics of large-scale metabituminous coal
in underground gasification based on thermogravimetric tests
		1 INTRODUCTION
		2 MATERIALS AND METHODS
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Determination of iodine in food by sodium nitrite-iodine-starch system
		1 INTRODUCTION
		2 EXPERIMENTAL
		4 CONCLUSION
		REFERENCES
	Organic chemistry retrosynthesis strategies, research on basic rules of breaking bonds and fine tuning
		1 INTRODUCTION
		2 PRINCIPLES OF DISCONNECTIONS
		3 SPECIFIC AND DETAILED DISCONNECTIONS
		4 FINE TUNING
		5 CONCLUSION
		REFERENCES
	Research progress and application status of polylactic acid
		1 INTRODUCTION
		2 SYNTHESIS OF PLA
		3 MODIFICATION OF PLA
		4 APPLICATION
		5 CONCLUSION
		REFERENCES
	Reactivity of Ca2Fe2O5 oxygen carriers for chemical looping steam methane reforming
		1 INTRODUCTION
		2 EXPERIMENT
		3 RESULTS AND DISCUSSION
		4 CONCLUSIONS
		ACKNOWLEDGMENT
		REFERENCES
	Research progress of FASnI3 for tin-based perovskite solar cells
		1 INTRODUCTION
		2 FASNI3 PSC RESEARCH PROGRESS
		3 CONCLUSION AND PROSPECT
		REFERENCES
	Optimal allocation of heat storage device based on thermal load and distributed new energy power
		1 INTRODUCTION
		2 NEW ENERGY POWER AND THERMAL LOAD SYNERGY SYSTEM
		3 MATHEMATICAL MODEL OF A SYNERGISTIC SYSTEM OF NEW ENERGY POWERAND THERMAL LOADS
		4 OPTIMISATION MODEL FOR CAPACITY ALLOCATION OF THERMAL STORAGEUNITS UNDER DECENTRALISED NEW ENERGY POWER
		5 EXAMPLE ANALYSIS
		6 CONCLUSIONS
		ACKNOWLEDGMENT
		REFERENCES
	Effect of the reduced Ca-Fe oxygen carrier on products distribution
during Chlorella chemical looping pyrolysis
		1 INTRODUCTION
		2 MATERIALS AND METHODS
		3 RESULTS AND DISCUSSIONS
		4 CONCLUSIONS
		ACKNOWLEDGEMENTS
		REFERENCES
	Effects of ankaflavin on fatty acid content of muscle in obese mice
		1 INTRODUCTION
		2 MATERIALS AND METHODS
		3 RESULTS AND ANALYSIS
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Visual analysis of bamboo furniture research based on CiteSpace
		1 INTRODUCTION
		2 ANALYSIS OF LITERATURE RESEARCH RESULTS OF BAMBOO FURNITURE
		3 ANALYSIS ON RESEARCH HOTSPOTS OF BAMBOO FURNITURE
		4 CONCLUSION AND OUTLOOK
		REFERENCES
	Discussion on main occurrence characteristics of geothermal resources
inYutai sag ofWest Shandong
		1 INTRODUCTION
		2 GEOLOGICAL BACKGROUNDS
		3 GEOTHERMAL GEOLOGICAL CONDITIONS
		4 GEOCHEMICAL CHARACTERISTICS OF GEOTHERMAL FLUID
		5 CONCLUSIONS
		REFERENCES
	Synthesis and electrochemical performances of LiNi0.5Mn1.5O4 materials prepared by a coprecipitation-hydrothermal method
		1 INTRODUCTION
		2 EXPERIMENTAL
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		REFERENCES
	Study on electrochemical performance of aluminum anode in seawater
and intertidal environment of Shengli oilfield
		1 INTRODUCTION
		2 EXPERIMENTAL SETTINGS
		3 RESULTS AND DISCUSSION
		4 CONCLUSIONS
		REFERENCES
	Synthesis and properties of cross-linked starch-based flocculant
		1 INSTRUCTION
		2 METHODS AND MATERIALS
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Study on solving plasma equilibrium composition model with HLMA algorithm
		1 INTRODUCTION
		2 EQUILIBRIUM COMPOSITION MODEL
		3 HOMOTOPY LEVENBERG-MARQUARDT ALGORITHM (HLMA)
		4 CASE ANALYSIS
		5 CONCLUSIONS
		ACKNOWLEDGMENT
		REFERENCES
	Influence of head variation on the stability of Kaplan turbine
		1 GENERAL INSTRUCTIONS
		2 RESEARCH METHOD
		3 RESULT ANALYSIS
		4 CONCLUSION
		REFERENCES
	Electrochemical behavior and mechanism analysis of lithium rich
materials Li1.2Mn0.54Co0.13Ni0.13O2 coated with iron
hydroxyphosphate
		1 INTRODUCTION
		2 EXPERIMENT
		3 RESULTS & DISCUSSION
		4 CONCLUSION
		REFERENCES
	Modeling and analysis of hydrogen-oxygen fuel cell
		1 INTRODUCTION
		2 FUEL CELL MODELING
		3 SIMULATION ANALYSIS OF FUEL CELL MODEL
		4 CONCLUSION
		REFERENCES
	Strength tests and mechanical characteristics of asphalt concrete in pumped storage power plants
		1 GENERAL INSTRUCTIONS
		2 METHODS AND MODEL
		3 RESULTS AND DISCUSSION
		4 CONCLUSIONS
		REFERENCES
	Contents of five heavy metals in agricultural land soil in Hengshui and ecological risk assessment
		1 INTRODUCTION
		2 MATERIALS AND METHODS
		3 RESULTS AND DISCUSSIONS
		4 CONCLUSIONS
		ACKNOWLEDGMENTS
		REFERENCES
	Effect of YSZ Addition on Electrochemical Activity of Pt/YSZ
Electrode
		1 INTRODUCTION
		2 EXPERIMENTAL PROCEDURE
		3 TEST RESULTS AND DISCUSSIONS
		4 CONCLUSIONBased on the re
		ACKNOWLEDGMENTS
		REFERENCES
	Study on sensory quality of Gaoxiangyihong Congou black tea
		1 INTRODUCTION
		2 MATERIALS AND METHODS
		3 RESULTS AND ANALYSIS
		4 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Research of different scale materials for pesticide residue detection
		1 INTRODUCTION
		2 SINGLE-ATOM CATALYST FOR PESTICIDES RESIDUE DETECTION
		3 NANOCATALYST FOR THE PESTICIDE RESIDUE DETECTION
		4 CONCLUSION
		REFERENCES
	Research and application of comprehensive evaluation method for
vehicle odor performance
		1 INTRODUCTION
		2 COMPREHENSIVE EVALUATION METHODS FOR IN-VEHICLE ODORPERFORMANCE
		3 ANALYSIS OF DATA RESULTS
		4 CONCLUSION
		REFERENCES
	A study on the magnetic powder enhanced flocculation of the hot rolling wastewater
		1 INTRODUCTION
		2 EXPERIMENTAL MATERIALS AND INSTRUMENTS
		3 METHODS
		4 RESULT AND DISCUSSION
		5 CONCLUSIONS
		ACKNOWLEDGMENTS
		REFERENCES
	A control method of chemical composition based on fuzzy theory during recycling aluminum scrap process
		1 INTRODUCTION
		2 QUALITY EVALUATION OF CHEMICAL COMPOSITION
		3 OPTIMIZATION CONTROL OF CHEMICAL COMPOSITION
		4 VERIFICATION
		5 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	The mechanism analysis of H radical effect on ignition
of methane/air mixture
		1 INTRODUCTION
		2 STUDY METHOD
		3 RESULTS ANALYSIS
		4 CONCLUSION
		REFERENCES
	Application of low-temperature plasma and titanium dioxide improving
new fouling resistant reverse osmosis membrane in water treatment
		1 INTRODUCTION
		2 MATERIALS AND METHODS
		3 DISCUSSION AND APPLICATION
		4 CONCLUSION
		REFERENCES
	Comprehensive utilization of red mud from the
perspective of circular economy
		1 INTRODUCTION
		2 CIRCULAR ECONOMY AND ITS ECONOMIC SYSTEM
		3 CURRENT SITUATION OF THE RED MUD CYCLIC UTILIZATION
		4 COMPREHENSIVE DEVELOPMENT STATUS OF RED MUD CYCLIC UTILIZATIONUNDER CIRCULAR ECONOMY
		5 COMPREHENSIVE PATHS OF USE OF RED MUD BASED ON CIRCULAR ECONOMYCONCEPT
		6 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Research status and prospect of demulsification technology
		1 INTRODUCTION
		2 PHYSICAL DEMULSIFICATION
		3 BIOLOGICAL DEMULSIFICATION
		4 CHEMICAL DEMULSIFICATION
		5 CONCLUSION
		REFERENCES
Electrothermal chemical engineering and chemical preparation technology
	Thermal behaviour of unsymmetrical dimethylhydrazine picrate
		1 INTRODUCTION
		2 EXPERIMENTAL
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		REFERENCES
	Experimental study of MnOx-CeO2/AC-catalyzed air oxidation for sulfide removal from wastewater
		1 INTRODUCTION
		2 PREPARATION OF CATALYST
		3 EXPERIMENTAL RESULTS (INFLUENCING FACTORS)
		4 REACTION MECHANISM EXPLORATION
		5 CONCLUSIONS
		ACKNOWLEDGMENTS
	Study on recovery of platinum from waste ternary catalyst
		1 RESEARCH BACKGROUND
		2 CURRENT RECYCLING METHODS AND THEIR DISADVANTAGES
		3 EXPERIMENTAL METHODS AND MATERIALS
		4 RESULTS AND DISCUSSION
		5 CONCLUSION
		REFERENCES
	Research on flue gas denitrification technology of natural circulation boiler
		1 INTRODUCTION
		2 SELECTIVE CATALYTIC REDUCTION (SCR)
		3 MAIN FACTORS AFFECTING SCR DENITRATION EFFICIENCY
		4 CATALYST SELECTION AND ARRANGEMENT OF SCR DENITRATION EQUIPMENT
		6 SELECTION AND LAYOUT OF SOOT BLOWING SYSTEM OF SCR DENITRATIONEQUIPMENT
		7 CONCLUSIONS
		ACKNOWLEDGMENT
		REFERENCES
	Study on recovery of soman from decontaminant of zirconium hydroxide
		1 INTRODUCTION
		2 EXPERIMENT
		3 RESULTS AND DISCUSSION
		4 CONCLUSIONS
		REFERENCES
	Preparation of Fe2O3 supported N-doped carbon-based ORR catalyst by phthalocyanine polymer
		1 INTRODUCTION
		2 THE EXPERIMENT SECTION
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	A review on characterization technologies for chemical features of activated carbon
		1 INTRODUCTION
		2 CLASSIFICATION OF SURFACE FUNCTIONAL GROUPS
		3 CHARACTERIZATION TECHNOLOGIES FOR CHEMICAL FEATURES
		4 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	The development, technology principles, and implementation of biofuels
		1 INTRODUCTION
		2 BASIC PHYSICS & TECHNOLOGY PRINCIPLES
		3 IMPLEMENTATION
		4 CONCLUSIONS
		REFERENCES
	Experimental study on sludge combustion behavior and heavy metal migration
		1 INTRODUCTION
		2 EXPERIMENT
		3 RESULT AND DISCUSSION
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Research progress on quick start-up of filter for manganese removal from groundwater
		1 INTRODUCTION
		2 MANGANESE REMOVAL METHOD
		3 FILTER MATERIALS ARE COMMONLY USED INWATER PLANTS
		4 QUICK STARTUP OF THE FILTER
		5 CONCLUSION
		REFERENCES
	Dechlorination of high-chlorine waste biomass by hydrothermal treatment with additives assistance
		1 INTRODUCTION
		2 MATERIALS AND METHODS
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		ACKNOWLEDGMENTS
		REFERENCES
	Study on the process of preparing C4 olefin by catalytic coupling of ethanol
		1 INTRODUCTION
		2 INVESTIGATION OF THE EFFECT OF DIFFERENT CATALYST COMBINATIONS ANDTEMPERATURES ON THE PREPARATION OF C4 OLEFINS
		3 INVESTIGATION OF THE OPTIMUM CONDITIONS FOR THE PREPARATION OF C4OLEFINS
		4 TEST RESULTS AND DISCUSSIONS
		5 CONCLUSION
		REFERENCES
	Enhancing the production of typical aromatic alcohols with three strategies
		1 INTRODUCTION
		2 SYNTHESIS OF AROMATIC ALCOHOL USING DECARBOXYLASE
		3 SYNTHESIS OF AROMATIC ALCOHOLS WITH CARBOXYLIC ACID REDUCTASE
		4 SYNTHESIS OF AROMATIC ALCOHOLS WITH COA DEPENDENT REDUCTASE
		5 CONCLUSION
		REFERENCES
	A harmlessness and resource treatment of hazardous waste sludge:Wet oxidation of caprolactam sludge
		1 INTRODUCTION
		2 EXPERIMENTAL SECTION
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Recovery of 1,1,2,2-tetrafluoroethyl ether from polytetrafluoroethylene waste—A preliminary study
		1 INTRODUCTION
		2 METHODS AND MATERIALS
		4 CONCLUSION
		REFERENCES
	Production of ethanol and 1,3-propanediol from raw glycerol by a
newly isolated Klebsiella pneumoniae from intertidal sludge
		1 INTRODUCTION
		2 METHODS AND MATERIALS
		ACKNOWLEDGMENT
		REFERENCES
	Synthesis of 9-Borafluorene derivatives with steric modulation
		1 INTRODUCTION
		2 METHODS AND MATERIALS
		3 RESULTS AND DISCUSSION
		4 CONCLUSION
		REFERENCES
	Preparation and properties of a molybdenum disulfide/graphene lubricating coating for aluminum alloy
		1 INTRODUCTION
		2 EXPERIMENTAL SECTIONS
		3 TEST AND RESULTS
		4 CONCLUSION
		ACKNOWLEDGMENT
		REFERENCES
	Experimental study on heat transfer of plate pulsating heat pipe with
channels of different diameters at the evaporating and condensation
ends and channels connected at the evaporating end
		1 INTRODUCTION
		2 INTRODUCTION OF THE NEW HEAT PIPE
		3 EXPERIMENTAL SETUP AND PROGRAM
		4 HEAT TRANSFER PERFORMANCE EVALUATION INDEX
		5 HEAT TRANSFER PERFORMANCE OF THE NEW HEAT
		6 COMPARISON WITH PLATE-TYPE PULSATING HEAT PIPE
		7 CONCLUSION
		REFERENCES
	Determination of cations in paper-making reconstituted tobacco by ion chromatography
	Application of ultra-high pressure hydraulic slotting pressure relief and permeability enhancement technology in broken soft coa
	Determination of bisphenol in disposable tableware by solid phase extraction and supercritical fluid chromatography
	Application of modified atmosphere packaging technology in pre-conditioned fish products
	Optimization and application of parameter identification error algorithm for electro-hydraulic servo and actuator system of the
	Selective synthesis of sulfinic ester from sulfide by photocatalytic oxidation
	Calculation and research on transition process of hydraulic interference in tailrace tunnel hydraulic power generation system sh
	Preparation and characterization of Mo-doped In2O3 thin films with magnetron Co-sputtering
	Determination of fatty acid content in liver and kidney of obese mice induced by a high-fat diet
	A conceivable new method of sulfation roasting of spent lithium-ion batteries: Together with industry SO2 gas
	The economic evaluation of the improvement of the reheating system of the secondary reheat steam turbine
	Analysis of hydrogen liquefaction industry in China
	Supported PdNPs catalysts prepared by MAO for highly efficient silane oxidation
	Carbon-catalyzed etching of porous silicon structures
	Preparation and property analysis of polyether polyol two-component rubber repair material
Author index