Condition Monitoring and Faults Diagnosis of Induction Motors : Electrical Signature Analysis

Content: Cover
 Half Title
 Title Page
 Copyright Page
 Dedication
 Table of Contents
 Preface
 Authors
 List of Abbreviations
 Nomenclatures
 Chapter 1: Introduction to Condition Monitoring of Electrical Machines
 1.1 Background
 1.2 Condition Monitoring
 1.3 Present Issues on CM
 1.4 Outlines of the Book
 Chapter 2: Background on Condition Monitoring Techniques
 2.1 Introduction
 2.2 Structure of the Induction Motor
 2.3 Various Faults Types of the Induction Motor
 2.3.1 Mechanical Defects
 2.3.1.1 Bearings Defects
 2.3.1.2 Air-Gap Eccentricity Defects 2.3.1.3 Abnormalities in Mechanical Transmission System2.3.2 Electrical Defects
 2.3.2.1 Stator Winding Defects
 2.3.2.2 Rotor Defects
 2.4 Invasive Condition Monitoring Techniques
 2.4.1 Acoustic Emission
 2.4.2 Thermal Monitoring
 2.4.3 Sound Monitoring
 2.4.4 Chemical Analysis
 2.4.5 Vibration Analysis
 2.5 Summary
 Chapter 3: Noninvasive Methods for Motor Fault Diagnosis
 3.1 Introduction
 3.2 MCSA for Bearings Localized Faults
 3.3 MCSA for Gear Faults
 3.4 IPA for Bearings Localized Faults
 3.5 Impact of Environment Noise on MCSA and IPA-Based Fault Detection 3.6 PVA for Bearings Localized Faults3.7 Noninvasive Methods for Diagnosis of Bearings Distributed Faults
 3.8 Condition Monitoring Issues
 3.9 Summary
 Chapter 4: Design and Development of a Noninvasive Condition Monitoring System
 4.1 Introduction
 4.2 Design and Development of Test Rig for Noninvasive Condition Monitoring System
 4.2.1 Test Rig Base
 4.2.2 Gear Box under Test
 4.2.2.1 Creation of Gear Defects
 4.2.2.2 Calculation of Gear Characteristic Defect Frequencies
 4.2.3 Brake
 4.2.4 Mechanical Coupling
 4.2.5 Bearing under Test
 4.2.5.1 Creation of Bearing Localized Defects 4.2.5.2 Calculation of Characteristic Defect Frequencies Related to Bearing Localized Defects4.2.6 Induction Motor Connection Scheme
 4.2.7 DAQ and Processing
 4.3 Design of LabVIEW Program
 4.4 Adaptive Threshold Design for IPA
 4.4.1 No-Load Conditions
 4.4.2 Medium-Load Conditions
 4.4.3 Full-Load Conditions
 4.5 Development of Noninvasive CM Method for Bearing Distributed Faults
 4.6 Summary
 Chapter 5: Faults Analysis and Evaluations via IPA and PVA Methods
 5.1 Introduction
 5.2 Analysis of Gear Faults
 5.3 Analysis of Bearing Localized Faults 5.3.1 Analysis of Bearings Outer Race Defects5.3.2 Analysis of Bearing Inner Race Defects
 5.3.3 Threshold Design for Variable Frequency Drive (VFD) Operation of the Motor
 5.4 Comparison of the Proposed Fault Diagnosis Scheme with previously used Schemes
 5.5 Park Vector Analysis for the Diagnosis of Mechanical Faults in Induction Motor
 5.5.1 Park Vector Analysis of Gear Defects
 5.5.2 Park Vector Analysis of Bearing Localized Defects
 5.5.3 Park Vector Analysis of Bearing Distributed Defects
 5.6 Analysis of IPA Technique
 5.7 Summary