Combined Roof-Bolting Systems of Mine Workings

I. RESEARCH INTO STABILITY OF REUSABLE IN-SEAM WORKINGS WHEN MINING THIN COAL SEAMS 
1 ANALYSIS OF ROCK PRESSURE MANIFESTATION IN THE PREPARATORY MINE WORKINGS AT THE STRUCTURAL TRANSFORMATION OF ENCLOSING ROCKS BY THE ROOF-BOLT STRENGTHENING 
1.1 Experience of combined roof-bolting systems application for strengthening the roof rocks of mine workings 
1.2 A mechanism for increasing the stability of mine workings by combined roof-bolting systems 
1.3 The interaction of support in mine workings with border rocks under the conditions of areas formation of their limiting state 
Conclusions 
2 RESEARCH AND ANALYSIS OF THE EXPERIENCE OF THE PREPARATORY MINE WORKINGS REUSE AT YUBILEINA MINE 
2.1 Mining research methodology 
2.2 Analysis of mining research results 
Conclusions 
3 THE COMPUTATIONAL EXPERIMENT SUBSTANTIATION AND STRESS-STRAIN STATE ANALYSIS OF BORDER ROCKS, AS WELL AS OF THE BASIC FASTENING SYSTEM OF PREPARATORY MINE WORKINGS IN THE ZONE OF STOPE WORKS INFLUENCE 
3.1 Construction of geomechanical models in conducting the computational experiments 
3.2 Analysis of stresses intensity in the border rocks of the preparatory mine working in the bearing pressure zone ahead of the longwall face 
3.3 Research and analysis of the stresses intensity of the basic fastening system in the bearing pressure zone ahead of the longwall face 
3.4 The stress intensity of border rocks in the zones of beginning of protective strip resistance and stabilization of the rock pressure manifestation 
3.5 The stress intensity analysis in basic fastening and protection systems behind the longwall face 
Conclusions 
4 RESEARCH AND ANALYSIS OF THE STRESS STATE OF THE LOAD-BEARING ELEMENTS IN THE PREPARATORY MINE WORKING “MASSIVE – FRAME – COMBINED ROOF-BOLTING SYSTEM” 
4.1 Stress state of rocks enclosing mine working in the area of stabilization of rock pressure manifestations 
4.2 The stress state of fastening system elements in the preparatory mine working and comparison with the basic variant of its fastening 
Conclusions 
5 ESTABLISHING AND ANALYZING THE PATTERNS OF GEOMECHANICAL FACTORS INFLUENCE ON THE RESISTANCE OF THE COMBINED ROOF-BOLTING SYSTEM TO ROCK PRESSURE 
5.1 Substantiation of the criterion for assessing the level of the roof-bolts resistance to the rock pressure manifestations 
5.2 The influence of the depth of mine working location 
5.3 Influence of the average calculated rocks resistance to compression of the adjacent massif 
5.4 Influence of the ratio of the average calculated resistance to compression of the immediate roof rocks to its thickness 
Conclusion 
6 DEVELOPMENT AND SUBSTANTIATION OF THE PARAMETERS CALCULATION OF THE ROOF ROCKS STRENGTHENING BY A COMBINED ROOF-BOLTING SYSTEM IN THE PREPARATORY MINE WORKINGS 
6.1 Substantiation and calculation of the parameters of the resin-grouted roof bolts location in the rocks of mine working arch 
6.2 Substantiation and calculation of strengthening the rocks in the arch of mine working with rope bolts 
6.3 Algorithm for calculating the parameters of the combined roof-bolting system for strengthening the rocks of the arch in the preparatory mine workings 
Conclusions 
7 THE INFLUENCE OF THE CENTRAL PROP STAYS OF THE STRENGTHENING SUPPORT ON THE FASTENING SYSTEM STRESS-STRAIN STATE OF MINE WORKING 
7.1 Analysis of the operation modes of the central prop stays of the strengthening support in the preparatory mine workings 
7.2 The research of the fastening system stress-strain state of mine working with the yielding prop stay in the strengthening support 
Conclusions 
Synthesis of the research results to Chapter I 
Chapter II. STRUCTURAL TRANSFORMATIONS OF THE ROCK MASSIF AND STABILITY OF MINE WORKINGS UNDER THE DOWNWARD AND JOINT MINING OF С8l AND С9 COAL SEAMS 106
8 GEOMECHANICAL AND METHODICAL ASPECTS OF RESEARCH INTO STABILITY OF THE REUSABLE MINE WORKINGS WHEN OVERWORKING AND UNDERWORKING A PARTING IN SEAMS С8 l AND С9 
8.1 Geomechanical peculiarities of C8l seam mining 
8.2 Development and substantiation of the geomechanical model of the 861 belt entry 
9 RESEARCH AND STRESS-STRAIN STATE ANALYSIS OF THE ROCK MASSIF ENCLOSING THE 861 BELT ENTRY AT THE BASIC AND RECOMMENDED SCHEMES OF MAINTAINING 
9.1 Anomalies of the rock pressure manifestations in the rock massif in the vicinity of the 861 belt entry at the basic scheme of maintaining 
9.2 Research and stress-strain state analysis of coal-bearing massif around the 861 belt entry at the recommended scheme of its maintenance 
10 RESEARCH AND ANALYSIS OF THE STRESS-STRAIN STATE OF FASTENING AND PROTECTION BASIC SYSTEMS ELEMENTS OF THE 861 BELT ENTRY OF THE SEAM С8l 
10.1 Analysis of vertical stresses components 
10.2 Determination of horizontal stresses components 
11 RESEARCH AND ANALYSIS OF THE STRESS-STRAIN STATE OF FASTENING AND PROTECTION RECOMMENDED SYSTEMS ELEMENTS FOT MAINTAINING THE 861 BELT ENTRY OF THE SEAM С8l 
11.1 Analysis of vertical stresses component 
11.2 Horizontal stresses components distribution 
11.3 Stresses intensity research 
11.4 Recommendations for selecting the parameters of the fastening and protection systems of reused mine workings through the example of mining the 861 longwall face 
Summarizing the research results to Chapter II 
Chapter III. RESEARCH INTO HEAVING OF MINE WORKINGS BOTTOM WHEN MINING THE FLAT-LYING SEAMS OF THE WESTERN DONBAS 
12 ANALYSIS OF THE PROBLEM OF PREDICTING THE BOTTOM ROCKS HEAVING OF MINE WORKINGS 
12.1 Technical and economical aspects of mine workings maintenance during rocks heaving 
12.2 Analysis of concepts of the mechanism of occurring the bottom rocks heaving and factors affecting its development 
12.3 Analysis of prediction techniques of the bottom rocks heaving in mine workings 
12.4 Structure, purpose and objectives of research in the geological and industrial Western Donbas region 
13 CONSTRUCTION OF GEOMECHANICAL MODEL OF THE “MASSIF – IN-SEAM WORKING” SYSTEM 
13.1 Structure of adjacent coal-bearing rock stratum of the mined-out coal seams of the Western Donbas 
13.2 Modeling the soft mine rocks deformation in the vicinity of in-seam working 
13.3 Substantiating parameters of in-seam workings and their support 
Conclusions 
14 TESTING THE MODEL OF THE GEOMECHANICAL SYSTEM “MASSIVE – IN-SEAM WORKING” 
14.1 The substantiation of parameters of the coal-bearing rock massif 
14.2 Parameters substantiation of the in-seam working and support 
Conclusions 195
15 RESEARCH AND ANALYSIS OF INFLUENCE OF STRUCTURE AND PROPERTIES OF THE COAL-BEARING ROCK STRATUM ON THE STRESSSTRAIN STATE OF THE “MASSIF – IN-SEAM WORKING” SYSTEM 
15.1 Substantiation of variants of stress-strain state calculation of “massif – in-seam working” systems and the methodology of conducting the computational experiment 
15.2 Stress-strain state analysis of the bottom rocks in in-seam working 
Conclusions 221
16 PECULIARITIES OF THE HEAVING DEVELOPMENT MECHANISM OF THE BOTTOM ROCKS OF IN-SEAM WORKING 
Conclusions 
17 STUDY OF PATTERNS RELIABILITY OF RELATION OF THE BOTTOM ROCKS STRUCTURE AND PROPERTIES WITH ITS HEAVING 
17.1 Development of a computational experiment technique 
17.2 Establishing the patterns of structure and properties influence of bottom rocks of the coal seam on heaving manifestations in in-seam workings 
18 ASSESSING THE STATE OF BOTTOM IN IN-SEAM WORKINGS 
18.1 Construction of regression equations for calculating the value of heaving in the bottom rocks 
18.2 The link of value of the bottom rocks heaving with the depth of mine working location 
18.3 Separation of mining-and-geological conditions according to the nature of heaving development and degree of the bottom rocks stability 
19 TECHNIQUE FOR PREDICTING AND MONITORING OF BOTTOM IN IN-SEAM WORKINGS OF THE WESTERN DONBAS MINES 
19.1 General information and calculations algorithm 
19.2 Formation of the initial data base for performing calculations 
19.3 Assessment of the state of bottom rocks and prediction of the value of its heaving 
19.4 An example of a predictive calculating the bottom rocks heaving of in-seam working 
Conclusions