Characterization of Minerals, Metals, and Materials 2015

Front Matter....Pages i-xxv
Front Matter....Pages 1-1
Study of Age Hardening Behavior in a 350 Grade Maraging Steel....Pages 3-10
Front Matter....Pages 11-11
Laser Welding between TWIP Steels and Automotive High-Strength Steels....Pages 13-20
Undercooling of Rapidly Solidified Droplets and Spray Formed Strips of Al-Cu (Sc)....Pages 21-28
Selective Laser Melting: Characteristics of IN718 Powder and Microstructures of Fabricated IN718 Sample....Pages 29-37
Front Matter....Pages 39-39
Advanced FIB Applications in Materials Research at CanmetMATERIALS....Pages 41-47
Cyclic Hardness Test PHYBALCHT: A New Short-Time Procedure to Estimate Fatigue Properties of Metallic Materials....Pages 49-56
Innovative Procedure for the Characterisation of Thermo-Mechanical Properties of Carbon Base Materials Using the Gleeble® 3800 System....Pages 57-64
Solid Solution Characterization in Metal by Original Tomographic Scanning Microwave Microscopy Technique....Pages 65-72
Front Matter....Pages 73-73
Comparsion of the Mechanisms of Void Formation by Plastic Deformation in Single- and Dual-Phase BCC-Steels....Pages 75-81
Characterization of Sintering Dust, Blast Furnace Dust and Carbon Steel Electric Arc Furnace Dust....Pages 83-90
Influence of Mineralogical Characteristics of Iron Ore on Formation and Flow of Liquid Phase....Pages 91-98
Effect of Pressure on the Corrosion of Materials in High Temperature Water....Pages 99-106
The Effect of Strain Reversal during High Pressure Torsion on the Microstructure Evolution and Texture of Aluminum Alloys....Pages 107-114
Front Matter....Pages 115-115
Bending Mechanical Behavior of Polyester Matrix Reinforced with Fique Fiber....Pages 117-121
Weibull Analysis of the Behavior on Tensile Strength of Hemp Fibers for Different Intervals of Fiber Diameters....Pages 123-130
Preparation and Characterization of Natural Rubber/Organophilic Clay Nanocomposites....Pages 131-138
Tensile Properties of Epoxy Composites Reinforced with Continuous PALF Fibers....Pages 139-144
Replacement of Carbon Black on Natural Rubber Composites and Nanocomposites — Part 1....Pages 145-152
Flexural Mechanical Characterization of Epoxy Composites Reinforced with Continuous Banana Fibers....Pages 153-158
Influence of the Nanoclay Cloisite 20A Incorporation on Properties of Acrylonitrile Butadiene Styrene (ABS)....Pages 159-163
Front Matter....Pages 165-165
Characterization of Closed-Cell Aluminium Foams Subjected to Compressive Loading....Pages 167-174
Front Matter....Pages 175-175
Improvement on Performance of Mg-C Refractories as Lining of Vanadium-Extraction Converters....Pages 177-184
Analysis on Deep Treatment Effect of Coking Wastewater Using 3D Electrode Combined with Fenton Reagent....Pages 185-192
Characterization of Steelmaking Desulfurization Slag....Pages 193-200
Development and Characterization of Nanomaterials for Zinc Vapor Capture....Pages 201-208
Separation of Roasted Coating and Core in Double-Layered Pellet Roasting for Pretreatment of Sulfur and Arsenic-Bearing Gold Concentrate....Pages 209-216
Prediction for the Surface Tension of FeO-TiO2-Ti2O3-X(SiO2, CaO, MgO) Slag Systems....Pages 217-224
Front Matter....Pages 225-225
Constitutive Modeling of a Glass Fiber-Reinforced PTFE Gasketed-Joint Under a Re-torque....Pages 227-234
Microwave Absorption Characteristics of Tire....Pages 235-243
Optical Evaluation for Biomimetic Microlens Array on PDMS Sheet....Pages 245-251
Behavior of Linear Low Density Polyethylene Films under UV Ageing for Agricultural Application....Pages 253-258
Photoacoustic Thermal Characterization of Malva Fibers....Pages 259-264
Mechanical, Morphological and Thermal Properties of Açaí Fibers Reinforced Biodegradable Polymer Composites....Pages 265-272
Influence of Clay Exfoliation on the Properties of Evoh/Clay Flexible Films....Pages 273-279
Front Matter....Pages 281-281
Chemical Resistance of Ornamental Compound Stone Produced with Marble Waste and Unsaturated Polyester....Pages 283-289
Characterization of Feldspar by Instrumental Analytical Techniques....Pages 291-297
Microwave Power Absorption Characteristics of Iron Oxides....Pages 299-305
Qualitative and Mineralogical Characterization of Lead Deposit in Ishiagu, Ebonyi State Nigeria....Pages 307-316
Sintering Characteristics of Iron Ores with Addition of Laterite Nickel Ores....Pages 317-324
Front Matter....Pages 325-325
Alumina Superfines Based Geopolymeres: Developments and Characterization....Pages 327-335
Front Matter....Pages 325-325
Densification and Mechanical Properties of Reaction Sintered Al2O3-MgO-CaO Refractory....Pages 337-343
Influence of Sintering Temperature on Microstructure and Properties of Magnesia Partially Stabilized Zirconia Ceramics....Pages 345-351
Evaluation of Structural Clay Brick Masonry Units by Weibull Analysis and Brazilian Code and Specifications....Pages 353-360
Brazilian Bentonite Submitted to Mild Acid Treatment Under Moderated Conditions....Pages 361-368
Increase of Flexural Strength of Red Ceramic Pieces Incorporated with Ornamental Rock Waste: Application of Weibull Statistic for Determination of Best Firing Temperature....Pages 369-376
Front Matter....Pages 377-377
Shape Memory Characteristics of Rapidly Solidified Ti-37.8Cu-18.7Ni Alloy Ribbons....Pages 379-383
Effects of Casting Conditions on the Structure and Magnetic Properties of the Co-19 at.%Al-6 at. %W Alloy....Pages 385-391
Characterization of the Phase Composition of Nanosized Lithium Titanates Synthesized by Inductive Thermal Plasma....Pages 393-400
Improved Hydrogen Storage Properties of Mg(BH4)2-Mg(AlH4)2 Combined Systems....Pages 401-408
Optical Parameters of CdS1−yTey Thin Films....Pages 409-416
Front Matter....Pages 417-417
The Effects of High Al2O3 on the Metallurgical Properties of Sinter....Pages 419-425
Characterization of Formulations with Ornamental Rock Waste and Clays to Produce Ceramic Paver....Pages 427-434
Evaluation of Thermoelectric Methods for the Detection of Fretting Damage in 7075-T6 and Ti-6Al-4V Alloys....Pages 435-442
Optimization Research of Peritectic Steel Mold Flux with Co2O3 Doping....Pages 443-448
Effect of Potential on Characteristics of Oxide Product Layers on Chalcopyrite....Pages 449-456
Pullout Tests Behavior of Epoxy Matrix Reinforced with Malva Fibers....Pages 457-463
Tensile Strength of Polyester Composites Reinforced with Fique Fibers....Pages 465-470
Characterization of Polyester Matrix Reinforced with Banana Fibers Thermal Properties by Photoacoustic Technique....Pages 471-478
Hot-Pressing and Mechanical Properties of BN Based Composites....Pages 479-485
Experimental Study of Advanced Treatment of Coking Wastewater Using PFS Coagulation-Photocatalytic Oxidation Technology....Pages 487-494
Front Matter....Pages 417-417
Phase Transformation and Element Migration in the Oxidation Process of Nickel-Copper Sulfide Ore....Pages 495-502
Sintering and Performance of High Alumina Refractory with ZrO2 Addition....Pages 503-507
Iron Recovery from Copper Slag Through Oxidation-Reduction Magnetic Concentration at Intermediate Temperature....Pages 509-516
Characterization and Evaluation of Incorporation the Casting Sand in Mortar....Pages 517-521
Carbonization of Coals Mixed Iron Ore Fines and Gasification of Resulting Iron Coke with CO2: Transformation of Iron Minerals and Coke Properties....Pages 523-531
Experimental Investigation on High Temperature Roasting of Basic Oxygen Furnace Slag....Pages 533-539
Experimental Study on Semi-Dry Flue Gas Desulfurization Ash Used in Steel Slag Composite Material....Pages 541-547
Effect of Manganese on the Formation Mechanisms of Silico-Ferrite of Calcium and Aluminum (SFCA)....Pages 549-555
Izod Impact Test in Epoxi Matrix Composites Reinforced with Hemp Fiber....Pages 557-562
Zinc Recovery from Zinc Oxide Flue Dust during the Neutral Leaching Process by Ultrasound....Pages 563-570
Microhardness and Deformation Storage Energy Density of NiTi Thin Films....Pages 571-578
Morphology and Distribution of Nb-Rich Phase and Graphite in Nb Microalloyed Ductile Iron....Pages 579-585
Cause Analysis on Buildup Formation of Carbon Sleeve in Continuous Annealing Furnace for Non-Oriented Silicon Steel Produced by CSP Process....Pages 587-593
Analysis of the Feasibility of Using Soil from the Municipality of Goytacazes/RJ for Production of Soil-Cement Brick....Pages 595-600
Effects of Niobium Microalloying on the Pearlite of Ductile Iron....Pages 601-606
Evaluation of Palf Fibers Elasticity Modulus with Different Diameters by Weibull Analysis....Pages 607-612
Research on Reasonable Particle Size of Coal Blends for Blast Furnace Injection: Semi Coke and Bituminous Coal....Pages 613-619
Recovery of Copper from Slow Cooled Ausmelt Furnace Slag by Floatation....Pages 621-628
Characterization of Mechanical Properties of PP/HMSPP Blends with Natural and Synthetic Polymers Subjected to Gamma-Irradiation....Pages 629-636
Effect of Mercerization and Electron-Beam Irradiation on Mechanical Properties of High Density Polyethylene (HDPE) / Brazil Nut Pod Fiber (BNPF) Bio-Composites....Pages 637-644
Front Matter....Pages 417-417
Analysis of Porosity and Flexural Strength Changes of Red Ceramic Pieces Incorporated with Ornamental Rock Waste....Pages 645-650
Effects of Accelerated Thermal Aging on Polypropylene Modified by Irradiation Process....Pages 651-658
Mechanical Properties of Polypropylene Nanocomposites with Organoclay and Discarded Bond Paper....Pages 659-666
Recovery of Mercury and Lead from Wastewater by Sulfide Precipitation-Flotation....Pages 667-674
Clinker Production from Waste: From Cellulose Industry and Processing Marble and Granite Industry....Pages 675-680
Study of Wettability of Clayey Ceramic and Fluorescent Lamp Glass Waste Powders....Pages 681-686
Biodegradable Starch/Copolyesters Film Reinforced with Silica Nanoparticles: Preparation and Characterization....Pages 687-693
Cyanidation Study of Slag Rich in Silver....Pages 695-702
Thermophysical Properties of Modified Ti-bearing Blast Furnace Slags....Pages 703-709
PhybalSIT — Fatigue Assessment and Life Time Calculation of the Ductile Cast Iron EN-GJS-600 at Ambient and Elevated Temperatures....Pages 711-718
Gold Leaching Characteristics and Intensification of a High S and As-Bearing Gold Concentrate....Pages 719-726
Electrochemical Properties of Al-Cu Alloys in Nacl Solutions....Pages 727-734
Evaluation of Acid Treatment on Brown Bentonite....Pages 735-742
Numerical Simulation of the Copper Steel Composite Stave Heat Transfer in the Belly and Lower Shaft Region of the Blast Furnace....Pages 743-753
Effect of Applied Pressure on the Tribological Behaviour of Dual Particle Size Rutile Reinforced Lm13 Alloy Composite....Pages 755-762
Investigation on Mechanical and Thermal Behaviours of Copolyester/Pla Blend Reinforced with TiO2 Nanoparticle....Pages 763-768
Influence of Cu2+ and Zn2+ on the Dissolution of Ag IN S2O32- Medium....Pages 769-775
Photocatalytic H2 Production under Visible Light Irradiation on Novel Heterostructure Nis/Zns Nanosheet Photocatalyst....Pages 777-784
Back Matter....Pages 785-792