Advances in Manufacturing Technology: Select Proceedings of ICAMT 2018

Front Matter ....Pages i-xxiv
 Evaluation of Tensile Properties of Nanoclay-Filled Madar Fiber-Reinforced Polyester Hybrid Composites  (Gunti Rajesh, M. V. Raghavendra Rao, K. Vijay, S. Gopinath)....Pages 1-8
 Characterization of Economical Aluminium MMC Reinforced with Weld Slag Particles  (P. Paranthaman, P. M. Gopal, N. Sathiesh Kumar)....Pages 9-16
 Optimization of Weld-Bead Parameters of Plasma Arc Welding Using GA and IWO  (Kadivendi Srinivas, Pandu R. Vundavilli, M. Manzoor Hussain)....Pages 17-24
 Experimental Studies on the Effect of Basalt Powder Inclusion on Mechanical Properties of Hybrid Epoxy and Polyester Composites Reinforced with Glass Fiber  (S. Mahesh Babu, M. Venkateswara Rao)....Pages 25-31
 An Experimental Investigation on Tensile Properties of Hybrid BioPolyurethane Composite: Modeling and Optimization  (A. Soundhar, M. Rajesh, K. Jayakrishna, M. T. H. Sultan)....Pages 33-40
 Improvement of Machining Characteristics by EDM with Graphite Powder-Mixed Dielectric Medium  (V. Srinivasa Sai, K. Gnana Sundari, P. Gangadhara Rao, B. Surekha)....Pages 41-48
 Measuring Industrial Symbiosis Index Using Multi-Grade Fuzzy Approach  (C. Kalyan, T. Abhirama, Neyara Radwan Mohammed, S. Aravind Raj, K. Jayakrishna)....Pages 49-58
 Fabrication and Machining Characteristics of Al7075-Red Mud and Al7075-TiC Metal Matrix Composites  (Chinmayee Kar, B. Surekha)....Pages 59-64
 Multicriteria Optimization of Machining Parameters in WEDM of Titanium Alloy 6242  (R. Prasanna, P. M. Gopal, M. Uthayakumar, S. Aravind)....Pages 65-75
 Water Absorption and Density Tests on the Water Hyacinth-Based Partial Green Composite  (Rakesh Potluri, M. Sreenivasa Rao)....Pages 77-88
 Experimental Analysis on the Mechanical Properties of Dissimilar Material Joint During PCTIG Welding  (B. Kamesh Srikar, Raghuraman Srinivasan, Venkatraman Ramamoorthi, Sivachidambaram Pichumani, J. Durga Venkata Satyanarayana)....Pages 89-93
 Influence of Flux Coating During Dissimilar Welding of Copper with Brass Using ATIG Welding Process  (J. Durga Venkata Satyanarayana, Raghuraman Srinivasan, Venkatraman Ramamoorthi, Sivachidambaram Pichumani, B. Kamesh Srikar)....Pages 95-103
 Innovative Nitride Film Deposition on Copper Interconnects of MEMS Devices Using Plasma-Enhanced Chemical Vapor Deposition Techniques  (T. Jagadeesha, Louis Kim)....Pages 105-112
 Sleep Detection and Alert System for Automobiles  (T. Babu, S. Ashwin, Mukul Naidu, C. Muthukumaaran, C. Ravi Raghavan)....Pages 113-118
 Numerical Analysis and Design Optimization of Lip Seal Opening Pressure for Automotive Valves  (T. Sukumar, B. R. Ramesh Bapu, B. Durga Prasad, B. R. Vijay Prithiv)....Pages 119-129
 Mechanical and Microstructural Properties of Multi-Axially Forged LM6 Aluminium Alloy  (Sudheer S. Sajjan, Mithun V. Kulkarni, S. Ramesh, P. C. Sharath, R. Rajesh, Vasantha Kumar)....Pages 131-139
 Implementation of Lean Concepts Using Value Stream Mapping in Automotive Firm  (Abhishek Deokar, S. Aravind Raj, K. Jayakrishna, H. Abdul Zubar)....Pages 141-147
 Fabrication of Automated Scrap Collector Cum Scrubber for Production Industries  (R. Bhoopathi, K. Karthikeyan, J. Balamurugan, S. Krishnakanth, T. Dharan Raj)....Pages 149-157
 Enhancement of Mechanical Properties Through Spheroidization Annealing for Low-Carbon Steel  (D. Venkatesan, R. Chandramouli)....Pages 159-165
 Effect of Rolling Reduction on Microstructure and Mechanical Properties Cu-3%Ti Alloy  (Prabhjot Singh, S. Ramesh, Gajanan Anne, H. Shivananda Nayaka)....Pages 167-175
 An Investigative Approach to Study the Corrosion Response of Copper–Brass TIG Welded Samples Using Nitric Acid as the Corroding Agent  (Aparna Vinayan, Sourabh S. Nair, Raghuraman Srinivasan, Sivachidambaram Pichumani)....Pages 177-186
 A Review on Mechanical Properties, Tribological, Corrosion, and Weldability Studies of Aluminium Composites Processed Using Stir Casting and ECAP Methods  (Aravind Muralitharan, Krishna Madhavan, Raghuraman Srinivasan, Venkatraman Ramamoorthi, Sivachidambaram Pichumani)....Pages 187-192
 Characterization and Comparison of Functionally Graded Al/Mg and Al/Al 7075 Metal Matrix Composites Manufactured by Die Casting  (Goutam Mondal, Pradipta Kumar Rout, Gourab Mohanty, B. Surekha)....Pages 193-198
 Statistical Quality Control of Torque Wrenches Used in Automotive Assembly Department  (Soham Kulkarni, Chaitanya Kulkarni, K. E. K. Vimal, K. Jayakrishna)....Pages 199-208
 Optimal Sequence Identification in Parallel Flow Line Environment Using Heuristics  (N. Rajeswari, K. Balasubramanian)....Pages 209-217
 Design and Analysis of Stringer on the Chassis Frame in Load Carrying Vehicle  (B. Stalin, M. Ravichandran, C. Ramesh Kannan, K. Sathiya Moorthi)....Pages 219-225
 Design and Analysis of Active Controlled Prosthetic Hand  (E. Vijayaragavan, Nikhar Khandelwal, Pathan Aftab Altaf)....Pages 227-232
 Biodegradable Composites from Leaf Wastes for Packing Applications  (S. Renold Elsen, R. Bharanidaran, S. Surendarnath)....Pages 233-241
 A Comparative Study of Flow Characteristics of BMW M6 and AUDI R8 Commercial Sports Car Using Flow Design Software  (S. Renold Elsen, K. Jegadeesan, J. Ronald Aseer)....Pages 243-253
 Mechanical Characterization of Glass Fiber-Strengthened Balsa–Depron Composite  (Nallusamy Tamilselvam, S. Varsha, D. S. Seema, B. Indhumathy)....Pages 255-263
 Milling Cutter Flank Wear Prediction Using Ensemble of PSO-Optimized SVM and GLM Regression Models  (B. Stalin, M. Ravichandran, S. Marichamy, C. Anandavel Murugan)....Pages 265-271
 Investigation on the Corrosion Resistance Characteristics of Automobile Lug Nuts  (K. Sridharan, B. Muthuselvan, R. Gopinath, M. Umamaheswari)....Pages 273-279
 Optimization of Process Parameters of Electrochemical Machining of TiC-Reinforced AA6063 Composites  (S. Saravanan, M. Ravichandran, B. Stalin, S. Saravanavel, S. Sukumar)....Pages 281-287
 Performance Analysis of SS304 Steel Hat Stringer on the Chassis Frame  (C. Ramesh Kannan, B. Stalin, M. Ravichandran, K. Sathiya Moorthi)....Pages 289-296
 Finite Element Modeling of Single Spark Material Removal and Heat Flux Distribution in Micro-Electro Discharge Machining Process  (Ishwar Bhiradi, Leera Raju, Somashekhar S. Hiremath)....Pages 297-307
 Electrochemical Micromachining of Aluminium Alloy Composite  (S. Ramesh, V. Subburam)....Pages 309-317
 Analysis on Mechanical Behaviour of Binary and Hybrid Al2014 Metal Matrix Composites  (S. Arivukkarasan, B. Stalin, A. Suresh Babu, M. Pandiyarajan)....Pages 319-325
 Study of Forces, Surface Finish, and Tool Life on Machining of Inconel 718  (K. Venkatesan, S. Devendiran, Biplav Bijoy Goswami, Prafful Kumar, Shakya Rishabhsingh Tejpalsinngh)....Pages 327-334
 Investigations on Corrosion Behaviour of AA 8011-ZrB2 in Situ Metal Matrix Composites  (B. M. Muthamizh Selvan, V. Anandakrishnan)....Pages 335-342
 Introducing Various Image Processing Techniques to Improve Topology Optimization Process to Develop Compliant Mechanism-Based Microgripper  (S. P. Banu Murthy, R. Bharanidaran, T. Ramesh, S. Renoldelsen)....Pages 343-349
 Study on Tensile Strength of GFRP Nanocomposites by VARTM  (A. Thiagarajan, K. Jagadish Chandra Bose, K. Velmurugan, V. S. K. Venkatachalapathy)....Pages 351-360
 Investigations on Wire Spark Erosion Machining of Aluminum-Based Metal Matrix Composites  (N. Manikandan, J. S. Binoj, K. C. Varaprasad, S. Sree Sabari, Ramesh Raju)....Pages 361-369
 Optimization of Coefficient of Friction for Direct Metal Laser Sintered Inconel 718  (S. Sathish, V. Anandakrishnan, V. Dillibabu, Duraiselvam Muthukannan, N. Balamuralikrishnan)....Pages 371-379
 Experimental and Numerical Investigation on Incremental Forming of IS513Cr3  (M. D. Vijayakumar, G. Gopalaramasubramaniyan)....Pages 381-390
 Modeling of Support Vector Mechanism for Green Manufacturability Quantification of Production  (T. Sathish)....Pages 391-397
 Experimental Study on Surface Roughness and Optimization of Process Parameters Using ANN-GA in Milling of Super-Duplex Stainless Steel Under Dry and Wet Conditions  (Soumya Sambedana, N. Subhash, P. Nithin Raj, T. Jagadeesha)....Pages 399-409
 Experimental Study on Tool Wear and Optimization of Process Parameters Using ANN-GA in Turning of Super-Duplex Stainless Steel Under Dry and Wet Conditions  (N. Subhash, Soumya Sambedana, P. Nithin Raj, T. Jagadeesha)....Pages 411-420
 Multi-Response Optimization Using Grey Relation Analysis in Mechanical Micro Drilling (MMD) of Titanium Alloy—(CP-Ti) Grade II  (P. Prashanth, Somashekhar S. Hiremath)....Pages 421-431
 A Glance Through History of Automobile Industry and Current Market Study of Some of the Legendry Models in India  (Muthu Ajay, Sridhar Kannan, P. Prem Narayan, R. Deepak Suresh Kumar)....Pages 433-441
 Effect of Twist Angle and RPM on the Natural Vibration of Composite Beams Made up of Hybrid Laminates  (Rakesh Potluri, V. Diwakar, K. Venkatesh, R. Sravani)....Pages 443-452
 Tribological Behavior of AZ91–Al2O3 Composites by Powder Metallurgy  (N. Keerthivasan, S. Selvaraj, V. Anandakrishnan, E. Thayumanvan)....Pages 453-461
 Annealing and ZnO Doping Effects on Hydrophilicity and Mechanical Strength of PVDF Nanocomposite Thin Films  (Mani Satthiyaraju, T. Ramesh, Kumarasamy Jagatheswaran)....Pages 463-471
 Optimization of Transient State Temperature Distribution Analysis on Diffusion-Bonded Joints of Ti–6Al–4V With SS304L Stainless Steel Alloy  (K. Muthukumar, R. B. Durairaj, G. Mageshwaran, J. Jayajeevahan, V. Sriram, Vikram Naidu)....Pages 473-483
 Optimization of Tribological Properties of Al6061/9%Gr/WC Hybrid Metal Matrix Composites Using FGRA  (Gangadhara Rao Ponugoti, Pandu R. Vundavilli, Alluru Gopala Krishna)....Pages 485-492
 Experimental Study on Mechanical Properties of Superelastic Alloy  (M. Sangeetha, P. Ponnusamy, Durgajeevitha, S. Shiva Ganesh)....Pages 493-502
 Framework Execution and Schematic of Jounce Bumper in Two-Wheeler Fork  (T. Babu, R. Sudharshan, Mohammed Suhail, K. Pradeep, S. Sanjay Arun)....Pages 503-509
 Finite Element Analysis of Bending and Dynamic Response of a Power Transmission Spur Gear  (A. Saravanan, P. Suresh)....Pages 511-525
 Design and Analysis of Composite Parabolic Leaf Spring Under Fatigue Load Condition  (Priyadarshi Dutt, T. Babu, M. Murugan, P. Anbarasu, Bala Subramani)....Pages 527-532
 Optimizing Headlamp Focusing Through Intelligent System as Safety Assistance in Automobiles  (S. K. Rajesh Kanna, N. Lingaraj, P. Sivasankar, C. K. Raghul Khanna, M. Mohanakrishnan)....Pages 533-545
 Modeling and Validation of Ride Characteristics of All-Terrain Vehicle (ATV)  (Mallikarjuna Reddy, Sanyam Kakkar, Prabhu Pal Singh, Uma Shankar Lath)....Pages 547-556
 Influence of Tool Rotation Speed on Soundness of Water-Cooled Friction Stir Welded Armour Grade Al–Cu Joint  (S. Sree Sabari, J. S. Binoj, Felix Xavier Muthu, S. Malarvizhi, V. Balasubramanian)....Pages 557-567
 Investigation of Hardness and Tribological Behaviour of Aluminium Alloy LM30 Reinforced with Silicon Carbide, Boron Carbide and Graphite  (P. Shanmugaselvam, R. Sasikumar, S. Sivaraj)....Pages 569-576
 Friction and Wear Properties of Bio-Based Abrasive in a High-Friction Composite Material  (S. Stephen Bernard, Md. Javeed Ahmed, J. Dasaprakash, M. R. Saroj Nitin, S. Vivek, G. K. Kannan)....Pages 577-585
 Parametric Optimization of Single-Cylinder Four-Stroke Spark Ignition Engine Crankshaft Using Four Different Materials—AISI 1040, AISI 4340, AISI 4140 and AISI 4615  (A. Pandiyan, G. Arun Kumar, S. Shaik Asif, Amit Patel)....Pages 587-593
 Evaluation and Optimization of Surface Roughness and Metal Removal Rate Through RSM, GRA, and TOPSIS Techniques in Turning PTFE Polymers  (N. Sathiya Narayanan, N. Baskar, M. Ganesan, M. P. Jenarthanan, S. Praveen)....Pages 595-605
 Effect of Sintering Temperature on the Microstructure and Forming Behavior of AA8079 (Al–Cu–Fe–Si–Zn)  (M. Meignanamoorthy, M. Ravichandran, A. Elmariung, S. Dinesh Kumar)....Pages 607-613
 Studies on the Influence of Welding Parameters in Cladding of ERNiCrMo-10 on AISI 4140 Using GMAW Process  (G. Britto Joseph, T. N. Valarmathi, G. Mageshwaran, Jeya Jeevahan, V. Sriram, R. B. Durai Raj)....Pages 615-621
 Review on Corrosion Behavior of Copper–Brass Weldment Samples During Welding with the Different Corrosive Environment  (Sourabh S. Nair, Aparna Vinayan, Raghuraman Srinivasan, Sivachidambaram Pichumani)....Pages 623-633
 Effect on Mechanical Properties of Aluminum Composites by Inclusion of Silicon Carbide  (V. Senthil Kannan, K. Lenin)....Pages 635-640