Advances in Manufacturing Engineering and Materials: Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia

Front Matter ....Pages i-xiv
Front Matter ....Pages 1-1
 Study Programs in STEM Field in Eastern European Countries vs. Brain Drain  (Dražan Kozak)....Pages 3-10
 Manufacturing in Times of Digital Business and Industry 4.0 - The Industrial Internet of Things Not Only Changes the World of Manufacturing  (Jan M. Olaf, Eckhart Hanser)....Pages 11-17
 A New Method for Gear Chamfering  (Manfred Schlatter, Niklas Müller)....Pages 18-26
Front Matter ....Pages 27-27
 New Approach of Recycling of Abrasives for Water Jet Cutting  (Miroslav Duspara, Tomislav Palatinuš, Dejan Marić, Ivan Samardžić, Željko Ivandić, Antun Stoić)....Pages 29-35
 The Use of Areal Parameters for the Analysis of the Surface Machined Using the Abrasive Waterjet Technology  (Dagmar Klichová, Jiří Klich, Tomáš Zlámal)....Pages 36-44
 Research on Water Jet Cutting of Polymer Composites Based on Epoxy/Waste Fibres from Coconut Processing  (Müller Miroslav, Valášek Petr, Novotný Jan, Ruggiero Alessandro, D’Amato Roberto, Habrová Karolína)....Pages 45-53
 Recent Developments in Pulsating Water Jets  (Josef Foldyna)....Pages 54-62
 Investigation on Pulsating Liquid Jet with Physiological Saline on Aluminium Surface  (Akash Nag, Sergej Hloch, Amit Rai Dixit, Dominik Cuha)....Pages 63-71
 Parametric Study During Abrasive Water Jet Turning of Hybrid Metal Matrix Composite  (Ashish Kumar Srivastava, Akash Nag, Amit Rai Dixit, Sandeep Tiwari, Vishal Shankar Srivastava)....Pages 72-84
 Effect of Frequency Change During Pulsed Waterjet Interaction with Stainless Steel  (Madhulika Srivastava, Sergej Hloch, Miroslav Muller, Monika Hromasová, Jaromír Cais, Somnath Chattopadhyaya et al.)....Pages 85-96
 Microstructure, Properties and Damage Mechanisms by Water Jet Cutting of TiB2-Ti Cermets Prepared by SPS  (Viktor Puchý, Martin Fides, Róbert Džunda, Richard Sedlák, Jaroslav Kováčik, Sergej Hloch et al.)....Pages 97-104
 Investigation on Feed Rate Influence on Surface Quality in Abrasive Water Jet Cutting of Composite Materials, Monitoring Acoustic Emissions  (Ioan Alexandru Popan, Vlad Bocanet, Nicolae Balc, Alina Ioan Popan)....Pages 105-113
 Comparison of Non-destructive Sensing Methods on Surface Created by Waterjet Technology  (Jiří Klich, Dagmar Klichová, Kamil Souček)....Pages 114-123
 Investigation of Limestone Cutting Efficiency by the Abrasive Water Suspension Jet  (Andrzej Perec)....Pages 124-134
 Erosion Test with High-speed Water Jet Applied on Surface of Concrete Treated with Solution of Modified Lithium Silicates  (Petr Hlaváček, Libor Sitek, Rudolf Hela, Lenka Bodnárová)....Pages 135-143
 Analysis of Micro Continuous Water Jet Based on Numerical Modelling and Flow Monitoring  (Michal Zelenak, Zdenek Riha, Kamil Soucek, Frank Pude)....Pages 144-155
 An Acoustic Emission Study of Rock Disintegration by Pulsating Water-Jet  (Rupam Tripathi, Sergej Hloch, Somnath Chattopadhyaya, Pavel Adamcik, Alok Kumar Das)....Pages 156-162
 Evaluation of Possibility of AISI 304 Stainless Steel Mechanical Surface Treatment with Ultrasonically Enhanced Pulsating Water Jet  (Dominika Lehocká, Vladimír Simkulet, Jiří Klich, Zdeněk Štorkan, Lucie Krejčí, Ján Kepič et al.)....Pages 163-172
 Non–traditional Machining of Inconel 600 Material  (Fuat Kartal, Sergej Hloch)....Pages 173-179
Front Matter ....Pages 181-181
 Mapping Requirements and Roadmap Definition for Introducing I 4.0 in SME Environment  (Vladimir Modrak, Zuzana Soltysova, Robert Poklemba)....Pages 183-194
 Dimensional Characterization of Prosthesis Bearings for Tribological Modelling  (Roberto D’Amato, Roque Calvo, Massimiliano Merola, Petr Valášek, Miroslav Müller)....Pages 195-204
 Accelerated Method of Cutting Tool Quality Estimation During Milling Process of Inconel 718 Alloy  (Witold Habrat, Krzystof Krupa, Nikolaos E. Karkalos)....Pages 205-212
 An Investigation on Tool Flank Wear Using Alumina/MoS2 Hybrid Nanofluid in Turning Operation  (Anuj Kumar Sharma, Rabesh Kumar Singh, Amit Rai Dixit, Arun Kumar Tiwari, Mahip Singh)....Pages 213-219
 Additive Printing of Gold Nanoparticles on Paper Substrate Through Office Ink-Jet Printer  (Mohammed Shariq, Amit Rai Dixit, Rupert Kargl, Somnath Chattopadhyaya, Meduri Venkata Sridutt, Pasagada Venkata Keerti Vardhan et al.)....Pages 220-228
 Preliminary Study on Staggered Herringbone Micromixer Design Suitable for Micro EDM Milling  (Izidor Sabotin, Gianluca Tristo, Andrej Lebar, Marko Jerman, Miha Prijatelj, Pavel Drešar et al.)....Pages 229-236
 Experimental Analysis of the Cutting Force Components in Laser-Assisted Turning of Ti6Al4V  (Witold Habrat, Krzysztof Krupa, Piotr Laskowski, Jan Sieniawski)....Pages 237-245
 Critical Failure Analysis of Lower Grinding Ring of Ball and Race Mill  (Gagan Kumar Guptaa, Somnath Chattopadhyayab)....Pages 246-253
 The Influence of the Application of EP Additive in the Minimum Quantity Cooling Lubrication Method on the Tool Wear and Surface Roughness in the Process of Turning 316L Steel  (Radoslaw W. Maruda, Stanislaw Legutko, Jolanta B. Krolczyk, Szymon Wojciechowski, Wlodzimierz Kot)....Pages 254-263
 Time-Dependent Feed Force Modelling to Apply Feed Rate Strategies in the Drilling of Unsupported CFRP-Structures  (Fabian Lissek, Sergej Hloch, Michael Kaufeld)....Pages 264-280
 Recognition of Assembly Parts by Convolutional Neural Networks  (Kamil Židek, Alexander Hosovsky, Jan Piteľ, Slavomír Bednár)....Pages 281-289
 The Use of Technology Local Heating by Laser for Turning of Difficult to Machine Materials  (Jakub Mesicek, Jana Petru, Tomas Zlamal, Marek Pagac, Jiri Sedivy, Ondrej Vortel et al.)....Pages 290-298
 Contributions to the Development of an Ontology in Logistics of Manufacturing  (Nicolae Stelian Ungureanu, Adrian Petrovan, Miorita Ungureanu)....Pages 299-306
 Advanced Output Characteristics of Welding Power Source for Pulsed GMAW  (Krzysztof Makles, Jerzy Winczek, Marek Gucwa)....Pages 307-314
 Investigation of the Effect of Johnson-Cook Constitutive Model Parameters on Results of the FEM Turning Simulation  (Piotr Löschner, Krzysztof Jarosz)....Pages 315-323
 Comparative Analysis of Surface Finishing for Different Cutting Strategies of Parts Made from POM C  (Nicolae Panc, Glad Contiu, Vlad Bocanet)....Pages 324-332
 Investigation of the Effect of Process Parameters on Surface Roughness in EDM Machining of ORVAR® Supreme Die Steel  (Krzysztof Jarosz, Piotr Nieslony, Piotr Löschner)....Pages 333-340
 The Influence of EP/AW Addition in the MQL Method on the Parameters of Surface Geometrical Structure in the Process of Turning 316L Steel  (Radoslaw W. Maruda, Szymon Wojciechowski, Grzegorz M. Krolczyk, Danil Yu Pimenov, Stanislaw Legutko)....Pages 341-350
 Change of the Substrate Surface After Removal Multiple Plasma Spraying Layers  (Jozef Kužma, Michal Krescanko, Sergej Hloch)....Pages 351-361
 Tool Wear Measurement in Single Point Incremental Forming  (Manish Oraon, Vinay Sharma)....Pages 362-371
Front Matter ....Pages 373-373
 Increasing Compressor Wheel Fatigue Life Through Residual Stress Generation  (Simon M. Barrans, Andrew Thompson, John Allport)....Pages 375-385
 Preliminary Study of Residual Stress Measurement Using Eddy Currents Phasor Angle  (Frantisek Botko, Jozef Zajac, Andrej Czan, Svetlana Radchenko, Vladimir Simkulet, Pavol Radic et al.)....Pages 386-397
 Forces and Process Dynamics in Profiling of AlCu4MgSi Aluminium Alloy  (Eugene Feldshtein, Piotr Nieslony)....Pages 398-406
 A Polyurethane/Carbon Black Composite Absorber for Low Frequency Waves  (Mustafa Yagimli, Hakan Tozan, H. Ergin Esen, Emin Arca)....Pages 407-412
 The Effect of Additional Shielding Gas on Properties and Erosion Resistance of High Chromium Hardfacing  (Marek Gucwa, Milos Mičian, Krzysztof Makles, Jerzy Winczek)....Pages 413-420
 Analysis of the Legal Risk in the Scientific Experiment of the Machining of Magnesium Alloys  (Dorota Habrat, Dorota Stadnicka, Witold Habrat)....Pages 421-430
 Prediction of Tensile Failure Load for Maraging Steel Weldment by Acoustic Emission Technique  (Gowri Shankar Wuriti, Tessy Thomas, Somnath Chattopadhyaya)....Pages 431-442
 Measurements of the Friction Coefficient: Discussion on the Results in the Framework of the Time Series Analysis  (Alessandro Ruggiero, Roberto D’Amato, Roque Calvo, Petr Valašek, Nicolae Ungureanu)....Pages 443-455
 Experimental Description of the Aging of the Coconut Shell Powder/Epoxy Composite  (Karolína Habrová, Petr Valášek, Miroslav Müller, Robert D´Amato, Alessandro Ruggiero)....Pages 456-464
 Fluid Film Pressure Description in Finite Turbulent Lubricated Journal Bearings by Using the Warner’s Theory  (Alessandro Ruggiero, Roberto D’Amato, Nicolae Ungureanu)....Pages 465-475
 Influence of Processing Parameters on Residual Stress in Injection Molded Parts  (Przemyslaw Poszwa, Pawel Muszynski, Pawel Brzek, Krzysztof Mrozek)....Pages 476-484
 Shape Memory Alloy (SMA) as a Potential Damper in Structural Vibration Control  (Sekhar Chandra Dutta, Rohan Majumder)....Pages 485-492
 Study of Cutting Tool Durability at a Short-Term Discontinuous Turning Test  (Peter Pastucha, Vidosav Majstorovic, Marián Kučera, Pavel Beno, Srecko Krile)....Pages 493-501
 Behavior of the Beam with a Lightweight Porous Structure in Its Core  (Jozef Tkáč, Martin Pollák)....Pages 502-510
 Advanced Preparation of the NC Programs with Usage of Strategy Manager  (Tomáš Dodok, Nadežda Čuboňová, Ivan Kuric)....Pages 511-517
 Modeling and Validation of Spindle Shaft Followed by Goal Driven Optimization  (Kahane Roshan, Somnath Chattopadhyaya, Shrikant Bhise, Dattatraya Parle)....Pages 518-530
 Modeling and Simulation of Technological Factors in Bakery Industry  (Adrian Dan Pop, Gabriel Rus, Raul Florentin Drența)....Pages 531-538
 Numerical Study of Rapid Cooling of Injection Molds  (Pawel Muszynski, Przemyslaw Poszwa, Pawel Brzek)....Pages 539-547
 Influence of Fill Imbalance on Pressure Drop in Injection Molding  (Przemyslaw Poszwa, Pawel Brzek, Pawel Muszynski, Marek Szostak)....Pages 548-556
 Assessment of the Production Reducer for Clamping the Drilling Tools  (Peter Michalik, Vieroslav Molnár, Martin Ambrozy, Michal Petruš, Peter Tirpak)....Pages 557-566
 Evaluation of Damage of Almandine Garnet Grains by N2 Adsorption Method  (Lucie Ruppenthalova, Petr Martinec, Lucie Gurková)....Pages 567-574
Back Matter ....Pages 575-577