Advances in Cryogenic Engineering Materials : Volume 30

Front Matter....Pages i-xxi
Stiffness and Internal Stresses of Woven-Fabric Composites at Low Temperatures....Pages 1-7
Dynamic Young’s Modulus and Internal Friction in a Composite Material at Low Temperatures....Pages 9-16
Fatigue of Glass-Epoxy Composite at 77K and 300K: Observation and Prediction....Pages 17-24
Acoustic Emission from Composite Materials at Low Temperatures....Pages 25-32
Problems of Cryogenic Interlaminar Shear Strength Testing....Pages 33-40
Mechanical Properties of Organic Insulators for Superconducting Magnets after Low Temperature Irradiation....Pages 41-49
Epoxies for Low Temperature Application Impregnating Technology....Pages 51-60
Correlation of Dielectric and Mechanical Damping at Low Temperatures....Pages 61-70
Optical Relaxation Processes in Polymers at Low Temperatures....Pages 71-82
Low Temperature Fracture Strain at High Deformation Rates....Pages 83-88
The Chemistry of Radiation Damage in Epoxide Resins....Pages 89-96
Tensile, Compressive, and Shear Properties of a 64-Kg/m 3 Polyurethane Foam at Low Temperatures....Pages 97-104
The Low-Temperature Thermal Conductivity of Rubber....Pages 105-110
Photomechanical Stress Analysis Under Cryogenic Environments....Pages 111-117
Nondestructive Evaluation of Thick Austenitic Stainless Steel Weldments by Shear Horizontal Acoustic Waves....Pages 119-126
Low Temperature Strengthening of Austenitic Stainless Steels with Nitrogen and Carbon....Pages 127-136
Nitrogen-Containing 25Cr-13Ni Stainless Steel as a Cryogenic Structural Material....Pages 137-144
The Development of a Nitrogen-Strengthened High-Manganese Austenitic Stainless Steel for a Large Superconducting Magnet....Pages 145-152
Mechanical Properties of High Yield Strength High Manganese Steels at Cryogenic Temperatures....Pages 153-160
An Fe-Mn-Al Austenitic Steel for Cryogenic Uses....Pages 161-168
Development of a High-Strength High-Manganese Stainless Steel for Cryogenic Use....Pages 169-176
The Influence of Processing on the Cryogenic Mechanical Properties of High Strength High Manganese Stainless Steel....Pages 177-184
Effect of Strain Rate on Measured Mechanical Properties of Stainless Steel at 4 K....Pages 185-192
Strengthening and Serrated Flow of High-Manganese Nonmagnetic Steel at Cryogenic Temperatures....Pages 193-201
Mechanical Properties of Cold-Rolled and Aged Fe-Ni-Cr-Ti Austenitic Alloys for Low Temperature Use....Pages 203-210
A New Nickel-Free Cryogenic Steel, 06A1NbCuN, and Its Fracture-Safety Evaluation....Pages 211-218
Development of the New Cryogenic Structural Material for Fusion Experimental Reactor....Pages 219-226
The Influence of Prestrain and Transformation Mode on the Mechanical Properties of Nitrogen Stabilized Austenitic Steel....Pages 227-236
The Microstructure and Properties of a Cryogenic Steel Fe-21Cr-6Ni-9Mn-N....Pages 237-244
32Mn-7Cr Austenitic Steel for Cryogenic Applications....Pages 245-252
Magneto-Mechanical Effects in 304 Stainless Steels....Pages 253-262
The Temperature Dependence of the Tensile Yield Strength of Selected Austenitic Steels....Pages 263-270
Progress in Cryostructural Materials and their Welding in the USSR....Pages 271-282
Low Temperature Strength and Toughness of Thermomechanically Treated and EB Welded Fe-13%Ni-3%Mo-Ti Alloys....Pages 283-290
Welding Superalloy Sheet for Superconducting Cable Jackets....Pages 291-296
The Mechanism of Embrittlement of the Heat-Affected Zone of Metastable Austenitic Steel Welded Joints....Pages 297-302
Fracture Toughness of 25Mn Austenitic Steel Weldments at 4 K....Pages 303-310
Aging Response and Cryogenic Mechanical Properties of an In-Sn Eutectic Solder Alloy for Josephson Packaging....Pages 311-318
Cryogenic Creep of Metals....Pages 319-338
Transitions in Fatigue Processes at Low Temperature....Pages 339-347
Cryogenic Fatigue Crack Growth Rate Properties of JBK-75 Base and Autogenous Gas Tungsten Arc Weld Metal....Pages 349-358
The Use of Inconel Alloy 706 as a Structural Material in the 300 MVA Superconducting Generator....Pages 359-366
Low Temperature Mechanical Properties of CeO 2 -Alloyed Tetragonal Zirconia....Pages 367-373
Heat Treatments and Low Temperature Fracture Toughness of a Ti-6Al-4V Alloy....Pages 375-382
Physical Properties: Knowing, Guessing, and Measuring....Pages 383-393
Low Temperature Thermal Conduction in Solids....Pages 395-406
Metals and Alloys: Expansion and Contraction....Pages 407-416
Metallic Glasses....Pages 417-423
An Apparatus to Determine the Heat Capacity and Thermal Conductivity of a Material from 1 to 300 K in Magnetic Fields up to 9 T....Pages 425-432
Ceramic Composites for Enthalpy Stabilization of Superconducting Wire....Pages 433-439
Electrical Resistivity of Metals and Alloys at Cryogenic Temperatures: A Review....Pages 441-452
The Effect of Mill Temper on the Mechanical and Magnetoresistive Properties of Oxygen-Free Copper in Liquid Helium....Pages 453-460
Degradation of Copper Stabilizer in a Superconducting Wire Induced by Cyclic Stressing at Cryogenic Temperature....Pages 461-468
Magnetic Properties and Ferromagnetic Shielding of Ni-Fe-Mo Alloys at Cryogenic Temperatures....Pages 469-474
Magnetic Susceptibility and Strain-Induced Martensite Formation at 4 K in Type 304 Stainless Steel....Pages 475-482
Peculiarities of the Low-Temperature Electrical and Magnetic Properties in Fe-Cr-Ni-Mn Alloys....Pages 483-487
Effect of the Structure of Fe-Cr-Ni Alloys Strained at Low Temperatures on Their Electrical Resistivity....Pages 489-494
Materials for Superconducting Electronics....Pages 495-507
Tunneling and Surface Properties of Oxidized Metal Overlayers on Nb....Pages 509-533
Barrier/Electrode Interface Structure and I–V Characteristics of NbN Josephson Junctions....Pages 535-546
All Refractory, High T c Josephson Device Technology....Pages 547-558
Preparation of High T c Nb-(Ge,Si) Thin Films at Low Substrate Temperature....Pages 559-570
Superconducting NbN Film Treatments....Pages 571-577
Dependence of T c Phase Composition for Superconducting Nb-Ge Films Prepared by DC-Magnetron Sputtering....Pages 579-588
Oxidation Mechanism of the Surface of A15 Superconductors....Pages 589-599
Tunneling Studies of VN Thin Films....Pages 601-605
Fabrication of High Tc NbN Films by Ion Beam Deposition Technique....Pages 607-614
Homoepitaxial Growth of Nb 3 Ge on Nb 3 Ge....Pages 615-622
Preparation of NbC x N 1−x Thin Films by High Rate Reactive Sputtering....Pages 623-630
Determination of Optimum Preparation Parameters for Thin High-T c Nb 3 Ge Films....Pages 631-638
Local Investigation of Superconducting Transition of Nb 3 Ge Films....Pages 639-645
Flux Pinning in Ultrafine Filamentary Composites....Pages 647-658
Phase Relationships and Superconducting Properties of Ternary Systems Used in the Bronze Process....Pages 659-670
The Relationship Between the Martensitic Phase Transition and the Superconducting Properties of A15 Compounds....Pages 671-682
High Field NbN Superconductor on Carbon Fibers....Pages 683-697
Preparation of Superconducting Germanium Alloy Filament Using the Method of Glass-Coated Melt Spinning....Pages 699-706
Superconducting Properties of V 2 (Hf,Zr) Laves Phase Multifilamentary Wires....Pages 707-714
Superconducting Wires of Pb-Mo-S by Electro-Plating Technique....Pages 715-720
An Overview of Practical Superconductor Development in Japan....Pages 721-737
Superconducting Properties of Nb 3 Sn Multifilamentary Wires Fabricated by Internal Tin Process....Pages 739-746
Properties of (NbTa) 3 Sn-Filamentary Conductors....Pages 747-754
Manufacture and Superconducting Properties of Bronze Processed Nb 3 Sn Monofilamentary Wires with Be Additions....Pages 755-762
On the Nature of Coupling of In Situ Superconductors....Pages 763-769
High-Field Current-Carrying Capacities of ‘Titanium Bronze’ Processed Multifilamentary Nb 3 Sn Conductors with Pure and Alloy Cores....Pages 771-778
The Effects of Indium Addition on the Properties of Internal Tin Diffusion Processed Nb 3 Sn Wires....Pages 779-786
Development of Nb 3 Sn Cabled Conductor by External Diffusion Process and the Effect of Strain on the Critical Current....Pages 787-795
The Effect of Silicon Impurities on Superconducting Properties of V 3 Ga-Cu Wire....Pages 797-803
Improved Performance Powder Metallurgy and In Situ Processed Multifilamentary Superconductors....Pages 805-811
Optimization of High Current Density A-15 Superconductors Made by the ECN Powder Method....Pages 813-821
Strain Effects in Superconducting Compounds....Pages 823-836
Acoustic Emission in Materials for Superconductor Applications: A Review....Pages 837-849
Long-Range Atomic Order, Crystallographical Changes and Strain Sensitivity of J c in Wires Based on Nb 3 Sn and Other A15 Type Compounds....Pages 851-858
Elastic Behavior of Polycrystalline Nb 3 Sn, V 3 Ga and Nb 3 Ge....Pages 859-866
Study of Strain Effects on Critical Current and Mechanical Property in “In Situ” Nb 3 Sn Conductor....Pages 867-874
Effect of Internal Reinforcement on the Critical Current Density of Nb 3 Sn Wires....Pages 875-882
Effects of Incoloy 903 and Tantalum Conduits on Critical Current in Nb 3 Sn Cable-in-Conduit Conductors....Pages 883-890
Effects of Hot Isostatic Pressing on the Superconducting Properties of Nb 3 Sn Multifilamentary Wires....Pages 891-898
Electromagnetic Theory for In Situ Superconductors....Pages 899-907
Magnetic Impurity Scattering in In Situ Superconductors....Pages 909-915
Smooth Transition of Nb 3 Al Wire Fed by AC Current in High Magnetic Field....Pages 917-922
Hysteresis in a Fine Filament NbTi Composite....Pages 923-930
AC Losses in Superconducting Mono and Multifilamentary NbTi Wires Fed by AC Current at Different Frequency Values....Pages 931-937
AC Losses of 19-Strand Subcables for the ANL 3.3 MJ Coil....Pages 939-946
Current-Carrying Capacity and Energy Losses in Hydrostatically Extruded NbTi Wires....Pages 947-952
Critical Current Measurements on a NbTi Superconducting Wire Standard Reference Material....Pages 953-960
Pulsed Magnetic Field Testing of Multifilamentary Nb 3 Sn Superconducting Wire....Pages 961-968
Influence of Stabilizing Copper on the Quench Characteristics of Nb 3 Sn Wire....Pages 969-976
Training Studies of Epoxy-Impregnated Superconductor Windings — Part III: Epoxies, Conductor Insulations and Copper Ratio....Pages 977-984
Back Matter....Pages 985-998