5th International Symposium of Space Optical Instruments and Applications: Beijing, China, September 5-7, 2018

Preface
Contents
Organization
Analysis on NETD of Thermal Infrared Imaging Spectrometer
	1 Introduction
	2 Physical Mechanism of NETD
	3 Modeling and Analysis
	4 Conclusion and Future Work
	References
Demand Analysis of Optical Remote Sensing Satellites Under the Belt and Road Initiative
	1 Introduction
	2 Basic Situation Along the Belt and Road
	3 Status of Space-Based Remote Sensing Resources Along the Route
		3.1 Status of Remote Sensing Resources in Countries Along the Route
			3.1.1 Russia
			3.1.2 India
			3.1.3 Others
		3.2 Other Available Resources
			3.2.1 US Remote Sensing Satellite System
			3.2.2 French Remote Sensing Satellite System
			3.2.3 Italian Radar Satellite System
			3.2.4 German Remote Sensing Satellite
	4 Satellite Remote Sensing Application Needs Analysis
		4.1 Emergency Disaster Reduction and Relief
		4.2 Mineral Resources Survey
		4.3 Survey Drawing
		4.4 Weather Forecast and Climate Change Research
	5 Conclusion
	Bibliography
Design of an All-Spherical Catadioptric Telescope with Long Focal Length for High-Resolution CubeSat
	1 Introduction
	2 Telescope Design
		2.1 Design Concepts
		2.2 Aberration Analysis
		2.3 Results and Evaluation
	3 Tolerance
	4 Conclusion
	References
Design of Lobster-Eye Focusing System for Dark Matter Detection
	1 Introduction
	2 Progress
	3 Lobster-Eye Optics Design
		3.1 Design Principle
		3.2 Wider FoV All-Sky Monitor Lobster-Eye Optics Design
		3.3 Coating Design
			3.3.1 Materials
			3.3.2 Thickness
			3.3.3 Roughness
		3.4 Lobster-Eye Optics
		3.5 Lobster-Eye Optics Test
	4 Lobster-Eye Focusing System
		4.1 Prototype
		4.2 Detector
		4.3 Imaging Test
	5 Conclusion
	References
Design of Satellite Payload Management Integrated Electronic System Based on Plug and Play Technology
	1 Introduction
	2 Overview and Application of SpaceWire Technology
	3 Summary of Plug and Play Payload Management System Based on SpaceWire
		3.1 Architecture Design of Plug and Play Payload Management System
		3.2 Plug and Play Bus Protocol Analysis
	4 Design of Plug and Play Payload Management Architecture Based on SpaceWire
		4.1 Implementation of Plug and Play Bus Based on SpaceWire
			4.1.1 Bus Monitoring Technology
			4.1.2 Driver Bootstrap Technology
		4.2 Plug and Play Bus Routing Scheme Based on SpaceWire
	5 Design of Plug and Play Payload System Software Based on SpaceWire
		5.1 Design of Plug and Play Integrated Control Software Architecture
		5.2 Design of Plug and Play Payload Device Software Architecture
		5.3 Plug and Play Payload System Software Operation Mechanism
	6 Conclusion
	References
Full Path Analysis of Impact on MTF of Remote Sensing Camera by Jitter Spectrum
	1 Introduction
	2 Creating Full Path Model
		2.1 Vibration Source Model
		2.2 Structural Model
		2.3 Control Model
		2.4 Optical Model
		2.5 Structure-Optic Interface Program
	3 Frequency Domain Analysis of Momentum Wheel Vibration
	4 Time Domain Analysis of Momentum Wheel Vibration
	5 Impact on MTF
	6 Conclusion
	References
Influence of Micro-Vibration Caused by Momentum Wheel on the Imaging Quality of Space Camera
	1 Introduction
	2 Transmission Characteristics of Micro-Vibration Acceleration
		2.1 Micro-Vibration Ground Test
		2.2 Transmission of Micro-Vibration Acceleration
		2.3 Difference Between Single Running and Simultaneous Running
	3 Analysis of Rotation Angle Produced by Micro-Vibration
		3.1 The Establishment of the Finite Element Model
		3.2 Calculation of Rotation Angle of Mirrors
	4 Analysis of the Influence of Micro-Vibration on Imaging Quality
	5 Conclusion
	References
Integrated Design of Platform and Payload for Remote Sensing Satellite
	1 Introduction
	2 Integrated Mechanical Design Requirements
	3 Integrated Mechanical Design Content
	4 Integrated Overall Configuration and Layout Design
	5 Integrated Structural Mechanics Design
	6 Integrated Micro-Vibration Suppression Designs
	7 Conclusions
	Bibliography
Optical System Design of Space Remote Sensor Based on the Ritchey-Chretien Cassegrain System
	1 Introduction
	2 Design Requirements
	3 The Calculation of System Parameters
	4 Optical Design Principle of Space Remote Sensor
		4.1 The Design of R-C Cassegrain System
		4.2 Achromatic Principle of Rear Lens Group
	5 Result of Design
		5.1 Layout and Parameters of Space Optical Remote Sensor
		5.2 Image Quality Evaluation
	6 Conclusions
	References
Suppression of the Self-Radiation Stray Light of Long-Wave Thermal Infrared Imaging Spectrometers
	1 Introduction
	2 System Design
	3 Stray Light Analysis
		3.1 Method I: The Introduction of the Cold Stop
		3.2 Method II: The Whole Cooling Opto-Mechanical Parts
	4 Conclusion
	References
Star Camera Layout and Orientation Precision Estimate for Stereo Mapping Satellite
	1 Introduction
	2 Double-Vector Attitude Error Modeling
	3 Error Weighted Orientation Accuracy Modeling
	4 Simulation Results and Analysis
	5 Conclusion
	References
Study on Optical Swap Computational Imaging Method
	1 Introduction
	2 Theory
	3 Simulation
	4 Result and Discussion
	5 Conclusion
	References
CCD Detector´s Temperature Effect on Performance of the Space Camera
	1 Introduction
	2 Temperature Verification Test Scheme of CCD Detector
	3 Temperature Verification Test Results of CCD Detector
	4 Conclusion
	Bibliography
The Thermal Stability Analysis of the LOS of the Remote Sensor Based on the Sensitivity Matrix
	1 Introduction
	2 The Principle of LOS Affecting the Positioning Accuracy
	3 LOS Sensitivity Matrix
	4 Thermal Elastic Analysis of a Camera LOS
		4.1 Temperature Load
		4.2 Thermal Analysis Results
	5 Thermal Analysis of Camera LOS
	6 Conclusion
	References
Visible and Infrared Imaging Spectrometer Applied in Small Solar System Body Exploration
	1 Introduction
	2 Application of Hyperspectral Imaging in Deep Space Exploration
		2.1 Imaging Spectrometer Using Filter
		2.2 Dispersion Imaging Spectrometer
		2.3 Interference Imaging Spectrometer
	3 Spectral Detection of Small Solar System Bodies
		3.1 Spectrum Detection of Asteroids
		3.2 Main Belt Comets Detection
	4 Design of Visible and Infrared Imaging Spectrometer for Small Solar System Bodies Detection
		4.1 Main Specification Design of the Spectrometer
		4.2 Key Techniques of Asteroid Detection Spectrometer
	5 Conclusion
	References
A Novel Optical System of On-Axis Three Mirror Based on Micron-Scale Detector
	1 Introduction
	2 The Development and Application of Small Pixel Size Detector
		2.1 The Development of Small Pixel Size Detector
		2.2 The Application of Small Pixel Size Detector
			2.2.1 Space Remote Sensing
			2.2.2 Star Sensor
	3 The Influence of Detector Pixel Size on Imaging System
		3.1 The Influence of Pixel Size on Performance of Optical and Detection System
			3.1.1 Optical System
			3.1.2 Detection System
		3.2 The Difficulty of Designing an Optical System with Small Pixel Size Detector
			3.2.1 MTF
			3.2.2 F Number
			3.2.3 Depth of Focus
	4 A Novel Optical System of On-Axis Three Mirror
		4.1 Key for Designing the Optical System
		4.2 Performance Analysis
	5 Conclusion
	References
Design of a Snapshot Spectral Camera Based on Micromirror Arrays
	1 Introduction
	2 Principle and Design Considerations
	3 Design Results and Analysis
	4 Conclusion
	References
Design, Manufacturing and Evaluation of Grazing Incidence X-Ray Optics
	1 Introduction
	2 Requirements on Optics of Pulsar Navigation
	3 Design of the Optics
	4 Focusing Performance Analysis
	5 Manufacturing and Testing
	6 Performance Evaluation
		6.1 Target Source Characteristics
		6.2 SDD Quantum Efficiency
		6.3 Effective Area Evaluation
	7 Conclusions
	References
Fabrication of the Partition Multiplexing Convex Grating
	1 Introduction
	2 Diffraction Characteristics
	3 Fabrication
	4 Summary
	References
Research on the Optimal Design of Heterodyne Technique Based on the InGaAs-PIN Photodiode
	1 Introduction
	2 Outline of Lidar System
		2.1 Transmitter
		2.2 Receiver
		2.3 Detector
		2.4 Lidar Equation
	3 Heterodyne Detection
	4 Signal-to-Noise Ratio
	5 The Numerical Simulation
	6 Conclusion
	References
Research on the Thermal Stability of Integrated C/SiC Structure in Space Camera
	1 Introduction
	2 Structural Design and Optimization
	3 Manufacture
	4 Thermal Stability Test
	5 Summary
	References
The Application Study of Large Diameter, Thin-Wall Bearing on Long-Life Space-Borne Filter Wheel
	1 Introduction
	2 The Application Design of the Large Diameter, Thin-Wall Bearing
		2.1 Design Description of the Filter Wheel Mechanism
		2.2 Design Description of the Large Diameter, Thin-Wall Ball Bearing
	3 The Accelerated Lie Test of the Large Diameter, Thin-Wall Bearing
	4 Experimental Data Analysis and Discussion
	5 Conclusion
	References
A Step-by-Step Exact Measuring Angle Calibration Applicable for Multi-Detector Stitched Aerial Camera
	1 Introduction
	2 Method of Calibration
		2.1 Image Interior Element
		2.2 Principle of Accurate Angle Measurement
		2.3 Calibration for Central Detector
		2.4 Calibration for Edge Detector
	3 Error Analysis for Step-by-Step Calibration
		3.1 Error Caused by Optical Axes Displacement
		3.2 Error Caused by Inequality of Focal Length
	4 Experiment and Analysis
		4.1 Experiment Design
		4.2 Calibration of Central Detector
		4.3 Calibration of Edge Detector
	5 Conclusion
	References
Absolute Distance Interferometric Techniques Used in On-Orbit Metrology of Large-Scale Opto-Mechanical Structure
	1 Introduction
	2 Theory of Absolute Metrology and Laser Heterodyne
	3 Realistic Feasibility
	4 Adaptive and Robustness Analysis
		4.1 Adaptive Analysis
		4.2 Error Analysis and Control
	5 Summary
	References
Development and On-Orbit Test for Sub-Arcsec Star Camera
	1 Introduction
	2 Analysis of Mission and General Design Scheme
		2.1 Analysis of Mission
		2.2 General Design Scheme
	3 Some Important Steps
		3.1 The Focal Plane Precision Assembly
		3.2 Laboratory Calibration
		3.3 The Vacuum Focal Plane Setting and Testing
		3.4 Test on Orbit
	4 Conclusion
	References
Opto-Mechanical Assembly and Analysis of Imaging Spectrometer
	1 Introduction
	2 Principle
	3 Instrument
		3.1 Overview
		3.2 Imaging System
		3.3 Spectroscopic System and Detection System
	4 Test of Imaging System
		4.1 Effective Focal Length
		4.2 MTF
		4.3 Rear Working Distance
	5 Test of Spectroscopic System
		5.1 Optical Component Mounting
		5.2 Pinhole Slit Test
	6 Overall Spectrum Test
	7 Conclusion
	References
An Optimized Method of Target Tracking Based on Correlation Matching and Kalman Filter
	1 Introduction
	2 Base Algorithms
		2.1 Correlation Matching
		2.2 Kalman Filter
	3 Algorithms Improving and Implementation
	4 Result Analysis
	References
Design and Verification of Micro-Vibration Isolator for a CMG
	1 Introduction
	2 Model Build and Analysis of CMG Isolation System
	3 Verification of CMG Isolation System by Test
		3.1 Micro-Vibration Test
		3.2 Vibration Test
	4 Conclusion
	References
Development of a High-Frame-Rate CCD for Lightning Mapping Imager on FY-4
	1 Introduction
	2 CCD Architecture
		2.1 Active Pixel Configuration and Structure of Image Section
		2.2 Structure of Storage Section
		2.3 Total Device Structure
	3 CCD Characterization
	4 Summary
	References
Evaluation of GF-4 Satellite Multispectral Image Quality Enhancement Based on Super Resolution Enhancement Method
	1 Introduction
	2 Method
		2.1 GF-4 Satellite and Data Characteristics
		2.2 Technical Process
	3 Experimental Results
	4 Discussion and Conclusion
	References
Micro-Vibration Environment Parameters Measurement and Analysis of a Novel Satellite in Orbit
	1 Introduction
	2 Design of System
		2.1 Design of Overall Scheme
		2.2 Key Technologies
			2.2.1 Variable Range Technology
			2.2.2 Low Noise and High Precision Acquisition Technology
			2.2.3 Data Sampling Processing Technology
		2.3 The Method for In-Orbit Data Analyzing
	3 Measurement and Data Analysis
		3.1 Validity Verification of Measurement System
		3.2 Identification of Micro Vibration Parameters for the Whole Satellite In-Orbit
		3.3 Identification of Micro-Vibration Parameters for Loads with High Precision in Orbit
	4 Conclusion
	References
Multiband Image Fusion Based on SRF Curve and Regional Variance Matching Degree
	1 Introduction
	2 Fusion Algorithm Based on His Transform and Wavelet Transform
		2.1 Process of Algorithm
		2.2 Fusion Criterion
			2.2.1 Low Frequency Fusion Criterion
			2.2.2 High Frequency Fusion Criterion
	3 PAN Component Calculated Based on SRF Curve
	4 Experimental Result
	5 Conclusion
	References
Remote Sensing Image Mixed Noise Denoising with Noise Parameter Estimation
	1 Introduction
	2 Related Work
	3 Algorithm
		3.1 Parameters Estimator
		3.2 Denoiser
	4 Discussions
	5 Experiments
		5.1 Experimental Settings
		5.2 Experiment Results
	6 Conclusion
	References
Research on Infrared Image Quality Improvement Based on Ground Compensation
	1 Introduction
	2 Traditional Methods
		2.1 Based on Kalman Filtering Stripe Removal Algorithm
		2.2 Based on the Moment Matching Fringe Removal Algorithm
	3 Improved Algorithm
		3.1 Improved Kalman Filtering Algorithm Research Process
		3.2 Improved Moment Matching Algorithm Research Process
	4 The Evaluation Criteria
	5 Experiment
		5.1 Specification of Technical Indicators
		5.2 Test Results
		5.3 Characteristics and Applicability Analysis of the Two Improved Methods
	6 Key Technology and Technological Advancement
	7 Summary
	References
Research on the Influence of Different Factors of Micro-Vibration on the Radiation Quality of TDICCD Images
	1 Introduction
	2 Simulation Model
		2.1 Model Establishment
		2.2 Evaluation Indexes
	3 Simulation Results
		3.1 Simulation Input
		3.2 Amplitude Impact Analysis
		3.3 Frequency Impact Analysis
		3.4 Number of Stage Impact Analysis
	4 Rule Application
	5 Conclusion
	References
SVM-Based Cloud Detection Using Combined Texture Features
	1 Introduction
	2 SVM-Based Cloud Detection Using Combined Texture Features
		2.1 Pre-processing
		2.2 Texture Feature Extraction
		2.3 Feature Discrimination
	3 Experimental Results
		3.1 Experimental Set-up
		3.2 Results
	4 Conclusion
	References
An Oversampling Enhancement Method of the Terahertz Image
	1 Introduction
	2 The Proposed Method
	3 Experiment and Analysis
	4 Conclusion
	References
Band Selection for Hyperspectral Data Based on Clustering and Genetic Algorithm
	1 Introduction
	2 Related Work
		2.1 Supervised Band Selection
		2.2 Unsupervised Band Selection
	3 Band Selection Based on Clustering and Genetic Algorithm
		3.1 Framework
		3.2 Distance of Bands
		3.3 Evaluation of Clustering Results
		3.4 Individual Representation
	4 Experiments and Discussions
		4.1 Hyperspectral Dataset of Broadleaf
		4.2 Salinas Hyperspectral Dataset
	5 Conclusion
	References
Tree Species Classification of Airborne Hyperspectral Image in Cloud Shadow Area
	1 Introduction
	2 Study Area and Data Collection
		2.1 Overview of the Study Area
		2.2 Remote Sensing Data and Filed Data Obtaining
		2.3 Hyperspectral Data Processing and Tree Species Classification
			2.3.1 Geometric Correction and Atmospheric Correction
			2.3.2 Calculation of Narrow-Band Vegetation Index and Texture Analysis
		2.4 Supervised Classification
			2.4.1 Determination of the Classification System
			2.4.2 Classifier
			2.4.3 Selection of Training Samples
			2.4.4 Image Classification
	3 Classification Results and Analysis
		3.1 Image Classification Results
		3.2 Accuracy Verification
		3.3 Classification Results and Analysis
	4 Discussion
	5 Conclusion and Prospects
	References
Optical Design of a Simple and High Performance Reflecting Lens for Telescope
	1 Introduction
	2 Optical Design
		2.1 Requirements and Concept for Design of the Optical Telescope
		2.2 Results
	3 Conclusion
	References
Index